The authors wish to make the following corrections to this paper [1]: Figure 8 on page 6730 is replaced as follows:
Figure 8.
Components of an HTF-Salt heat exchanger.
In addition, the phrase “return head” was used instead of “mobile head or turn” in paragraph 1, page 6732.
The authors would like to apologize for any inconvenience caused to the readers by these changes.
Reference
- Menéndez, R.P.; Martínez, J.A.; Prieto, M.J.; Barcia, L.A.; Sánchez, J.M.M. A novel modeling of molten-salt heat storage systems in thermal solar power plants. Energies 2014, 7, 6721–6740. [Google Scholar] [CrossRef]
© 2015 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/4.0/).