Skip to Content
You are currently on the new version of our website. Access the old version .
EnergiesEnergies
  • Communication
  • Open Access

11 January 2023

7 Pages

Lubricant Oil Consumption and Opportunities for Oil-Free Turbines in the Hydropower Sector: A European Assessment

European Commission, Joint Research Centre, 21027 Ispra, Italy
This article belongs to the Topic Hydroelectric Power

Abstract

Lubricant oil is used in hydropower units to minimize friction, improving the turbine efficiency and reducing the wear. However, oil production is a pollutant process, while eventual spills may affect water quality and damage freshwater ecosystems. In this study, the lubricant oil consumption of the European hydropower fleet was estimated (considering its installed capacity of 254 GW). The energy required to extract and process the oil was also estimated based on available literature data. The oil consumption was estimated to be 22 × 103 tons/year, and the associated CO2 emissions are 105 tons/year. The lubricant oil costs EUR 116 million per year. Although this is only 0.0022% of the oil consumed as a primary energy source in the European context, and less than 0.4% of the European industry consumption of lubricant oil, results show that new bearing types and oil-free turbines (e.g., self-lubricating or water-lubricated turbines) can improve the sustainability of the hydropower sector, minimizing the risks and impacts associated with incidental oil spills and leakages. The provided data can also be used for Life Cycle Assessment analyses.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.