Skip to Content
SensorsSensors
  • Article
  • Open Access

19 March 2025

13 Pages

Delamination Detection in CFRP Stringers with A0-Mode Lamb Wave Curvature

,
,
,
and
1
State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China
2
School of Physics and Electronic Engineering, Fuyang Normal University, Fuyang 236037, China
3
Institute of Machinery Manufacturing Technology, China Academy of Engineering Physics, Mianyang 621900, China
*
Author to whom correspondence should be addressed.
This article belongs to the Section Fault Diagnosis & Sensors

Abstract

Ultrasonic detection of delamination in stringer-stiffened panels made of carbon fiber-reinforced plastics (CFRPs) presents a critical challenge due to their complex geometry, complicated properties and large size. In this work, a delamination detection method using the wavefield curvature of the A0-mode Lamb wave is proposed. Firstly, the underlying mechanism is numerically investigated to examine the interactions between the A0-mode Lamb wave and delamination at different sites of the stringer. Then, the wavefield curvature sensitive to local anomalies is revealed owing to the higher-order derivative nature. Thereafter, the proposed method is utilized to detect delamination in the fabricated CFRP specimens and the results are compared with X-ray computed tomography, confirming the feasibility and effectiveness of the proposed method. This viable method, capable of detecting delamination in larger CFRP stringers, will find great potential in the efficient non-destructive testing of CFRP structures in different applications.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.