Skip to Content
SensorsSensors
  • Article
  • Open Access

11 May 2023

11 Pages

IoT Electrochemical Sensor with Integrated Ni(OH)2–Ni Nanowires for Detecting Formaldehyde in Tap Water

,
,
,
,
,
,
and
1
Department for Nanostructured Materials, Jožef Stefan Institute, Jamova c. 39, 1000 Ljubljana, Slovenia
2
Jožef Stefan International Postgraduate School, Jamova c. 39, 1000 Ljubljana, Slovenia
3
Pulp and Paper Institute, Bogišićeva 8, 1000 Ljubljana, Slovenia
*
Author to whom correspondence should be addressed.
This article belongs to the Section Internet of Things

Abstract

Simple, low-cost methods for sensing volatile organic compounds that leave no trace and do not have a detrimental effect on the environment are able to protect communities from the impacts of contaminants in water supplies. This paper reports the development of a portable, autonomous, Internet of Things (IoT) electrochemical sensor for detecting formaldehyde in tap water. The sensor is assembled from electronics, i.e., a custom-designed sensor platform and developed HCHO detection system based on Ni(OH)2–Ni nanowires (NWs) and synthetic-paper-based, screen-printed electrodes (pSPEs). The sensor platform, consisting of the IoT technology, a Wi-Fi communication system, and a miniaturized potentiostat can be easily connected to the Ni(OH)2–Ni NWs and pSPEs via a three-terminal electrode. The custom-made sensor, which has a detection capability of 0.8 µM/24 ppb, was tested for an amperometric determination of the HCHO in deionized (DI) and tap-water-based alkaline electrolytes. This promising concept of an electrochemical IoT sensor that is easy to operate, rapid, and affordable (it is considerably cheaper than any lab-grade potentiostat) could lead to the straightforward detection of HCHO in tap water.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.