Next Article in Journal
Highly Sensitive Nuclease Assays Based on Chemically Modified DNA or RNA
Next Article in Special Issue
Influence of Segmentation of Ring-Shaped NdFeB Magnets with Parallel Magnetization on Cylindrical Actuators
Previous Article in Journal
A Real-Time Fatigue Monitoring and Analysis System for Lower Extremity Muscles with Cycling Movement
Previous Article in Special Issue
The Design, Fabrication and Characterization of a Transparent Atom Chip
Open AccessArticle

Synchronous Motor with Hybrid Permanent Magnets on the Rotor

Tele and Radio Research Institute, 11 Ratuszowa St., 03-450 Warsaw, Poland
Wroclaw University of Technology, 27 Wybrzeze Wyspianskiego St., 50-370 Wroclaw, Poland
Author to whom correspondence should be addressed.
Sensors 2014, 14(7), 12425-12436;
Received: 29 April 2014 / Revised: 18 June 2014 / Accepted: 24 June 2014 / Published: 10 July 2014
Powder metallurgy allows designers of electric motors to implement new magnetic circuit structures. A relatively new concept is the use of a magnet system consisting of various types of magnets on one rotor, for example sintered and bonded magnets. This concept has been applied to the design and manufacture of the four-pole rotor of a synchronous motor with 400 W power and a rotational speed of 1500 rpm. In this motor, the stator of an asynchronous motor type Sh 71-4B is applied. The application of the new construction of the rotor resulted in an increase in motor efficiency and power factor compared to an asynchronous motor with the same volume. View Full-Text
Keywords: magnet system; soft magnetic materials; electric motors magnet system; soft magnetic materials; electric motors
MDPI and ACS Style

Slusarek, B.; Kapelski, D.; Antal, L.; Zalas, P.; Gwoździewicz, M. Synchronous Motor with Hybrid Permanent Magnets on the Rotor. Sensors 2014, 14, 12425-12436.

Show more citation formats Show less citations formats

Article Access Map by Country/Region

Only visits after 24 November 2015 are recorded.
Back to TopTop