Abstract
Beech (Fagus orientalis Lipsky) forests in Iran are one of the most important sources of the hardwood species used for lumber, furniture, and interior object design due to its hardness, wear resistance, strength, and excellent bending capabilities. Furthermore, Iran is third most important country for walnut wood production after China and United States. Therefore, in this study, we compared specific mechanical properties between beech wood obtained from Sangdeh (Iran) and Georgia and four different kinds of walnut woods in Iran. Physical and mechanical tests were performed according to ISO 3129 (2012) and ASTM (D143-14) standards. The moisture content of all samples was 12% during mechanical tests. The mean dry density of Sangdeh and Georgian beech obtained was 0.61 and 0.65 g/cm3, respectively, while the mean dry density of Noor, Shahrekord, Mashhad, and Mako walnut woods measured 0.62, 0.59, 0.62, and 0.57 g/cm3, respectively. The results showed significant differences among the properties of the Sangdeh and Georgian species and the four different walnut tree woods. Overall, the obtained strengths of Georgian timber were higher than that of the Iranian beech, which was attributed to the higher density of Georgian timber. Furthermore, due to the higher density of the walnut species in the Noor and Mashhad regions, the measured mechanical strengths of these trees were higher than those of other walnut species. The obtained results provide relevant information to determinate the future applications of each wood source.