Search Results (530)

Electrospun nanofiber membranes (ESNFMs) are exceptional biomaterials for tissue engineering, closely mimicking the native extracellular matrix. However, their inherent fragility poses significant handling, processing, and integration challenges, limiting their widespread application in advanced 3D tissue models and biofabricated devices. This study introduces a novel and on-mat framing technique utilizing extrusion-based printing of a UV-curable biocompatible resin (Biotough D90 MF) to create rigid, integrated support structures directly on chitosan–polyethylene oxide (PEO) ESNFMs. We demonstrate fabrication of these circular frames via precise 3D printing and a simpler manual stamping method, achieving robust mechanical stabilization that enables routine laboratory manipulation without membrane damage. The resulting framed ESNFMs maintain structural integrity during subsequent processing and exhibit excellent biocompatibility in standardized extract assays (116.5 ± 12.2% normalized cellular response with optimized processing) and acceptable performance in direct contact evaluations (up to 78.2 ± 32.4% viability in the optimal configuration). Temporal assessment revealed characteristic cellular adaptation dynamics on nanofiber substrates, emphasizing the importance of extended evaluation periods for accurate biocompatibility determination of three-dimensional scaffolds. This innovative biofabrication approach overcomes critical limitations of previous handling methods, transforming delicate ESNFMs into robust, easy-to-use components for reliable integration into complex cell culture applications, barrier tissue models, and engineered systems. Full article

In order to develop modern polymer films intended for food packaging, materials based on cellulose acetate propionate (CAP) with the addition of Tween 80 as a plasticizer and cinnamic acid (CA), known for its antibacterial properties, were prepared. It should be emphasized that materials based on CAP combined with Tween 80 have not been previously reported in the literature. Therefore, not only is the incorporation of cinnamic acid into these systems an innovative approach, but also the use of the CAP-Tween80 matrix itself represents a novel strategy in the context of the proposed applications. The conducted studies made it possible to assess the properties of the obtained materials with and without the addition of cinnamic acid. The obtained results showed that the addition of cinnamic acid significantly influenced the crucial properties relevant to food storage. The introduction of CA into the polymer matrix notably enhanced the UV barrier properties achieving complete (100%) blockage of UVB radiation and approximately a 20% reduction of UVA transmittance. Furthermore, the modified films exhibited pronounced antibacterial activity, with over 99% reduction in Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa populations observed for samples containing 2 and 3% CA. This antibacterial effect contributed to the extended freshness of stored blueberries. Moreover, the addition of cinnamic acid did not significantly affect the transparency of the films, which remained high (97–99%), thereby allowing the fruit to remain visible. Full article

This study presents a novel approach to mitigate electron overflow in deep ultraviolet (UV) AlGaN light-emitting diodes (LEDs) by integrating engineered quantum barriers (QBs) with a concave shape and an optimized AlGaN superlattice (SL) electron blocking layer (EBL). The concave QBs reduce electron leakage by lowering the electron thermal velocity and mean free path, enhancing electron capture in the active region. The SL EBL further reduces electron overflow without compromising hole transport. At a wavelength of ~253.7 nm, the proposed LED demonstrates a 2.67× improvement in internal quantum efficiency (IQE) and a 2.64× increase in output power at 150 mA injection, with electron leakage reduced by ~4 orders of magnitude compared to conventional LEDs. The efficiency droop is found to be just 2.32%. Full article

Epitaxial growth of β-Ga₂O₃ nanowires on silicon substrates was realized by the low-pressure chemical vapor deposition (LPCVD) method. The as-grown Si/Ga₂O₃ heterojunctions were employed in the Underwater DUV detection. It is found that the carrier type as well as the carrier concentration of the silicon substrate significantly affect the performance of the Si/Ga₂O₃ heterojunction. The p-Si/β-Ga₂O₃ (2.68 × 10¹⁵ cm⁻³) devices exhibit a responsivity of up to 205.1 mA/W, which is twice the performance of the devices on the n-type substrate (responsivity of 93.69 mA/W). Moreover, the devices’ performance is enhanced with the increase in the carrier concentration of the p-type silicon substrates; the corresponding device on the high carrier concentration substrate (6.48 × 10¹⁷ cm⁻³) achieves a superior responsivity of 845.3 mA/W. The performance enhancement is mainly attributed to the built-in electric field at the p-Si/n-Ga₂O₃ heterojunction and the reduction in the Schottky barrier under high carrier concentration. These findings would provide a strategy for optimizing carrier transport and interface engineering in solar-blind UV photodetectors, advancing the practical use of high-performance solar-blind photodetectors for underwater application. Full article

Lignin, the most abundant renewable aromatic biopolymer on Earth, is rapidly emerging as a powerful enabler of next-generation sustainable technologies. This review shifts the focus to the latest industrial breakthroughs that exploit lignin’s multifunctional properties across energy, agriculture, healthcare, and environmental sectors. Lignin-derived carbon materials are offering scalable, low-cost alternatives to critical raw materials in batteries and supercapacitors. In agriculture, lignin-based biostimulants and controlled-release fertilizers support resilient, low-impact food systems. Cosmetic and pharmaceutical industries are leveraging lignin’s antioxidant, UV-protective, and antimicrobial properties to create bio-based, clean-label products. In water purification, lignin-based adsorbents are enabling efficient and biodegradable solutions for persistent pollutants. These technological leaps are not merely incremental, they represent a paradigm shift toward a materials economy powered by renewable carbon. Backed by global sustainability roadmaps like the European Green Deal and China’s 14th Five-Year Plan, lignin is moving from industrial residue to strategic asset, driven by unprecedented investment and cross-sector collaboration. Breakthroughs in lignin upgrading, smart formulation, and application-driven design are dismantling long-standing barriers to scale, performance, and standardization. As showcased in this review, lignin is no longer just a promising biopolymer, it is a catalytic force accelerating the global transition toward circularity, climate resilience, and green industrial transformation. The future of sustainable innovation is lignin-enabled. Full article

1,3-Diphenylisobenzofuran (DPBF) is a widely used fluorescent probe for singlet oxygen (¹O₂) detection in photodynamic applications. In this work, we present an integrated experimental and computational analysis to describe its spectroscopic, photophysical, and reactive properties in ethanol, DMSO, and DMF. UV-Vis and fluorescence measurements across a wide concentration range show well-resolved S₀ → S₁ electronic transition of a π → π* nature with small red shifts in polar aprotic solvents. Fluorescence lifetimes increase slightly with solvent polarity, showing stabilization of the excited state. The 2D PES and Boltzmann populations analysis indicate two co-existing conformers (C_s and C₂), with C_s being slightly more stable at room temperature. TD-DFT calculations have been performed using several density functionals and the 6-311+G(2d,p) basis set to calculate absorption/emission wavelengths, oscillator strengths, transition dipole moments, and radiative lifetimes. Overall, cam-B3LYP and ωB97X-D provided the best agreement with experiments for the photophysical data across all solvents. The photophysical behavior of DPBF upon interaction with ¹O₂ can be explained by a small-barrier, two-step reaction pathway that goes through a zwitterionic intermediate, resulting in the formation of 2,5-endoperoxide. This work explains the photophysical properties and reactivity of DPBF, therefore providing a solid basis for future studies involving singlet oxygen. Full article

In this paper, a series of polyaniline (PANI)/Ti₃C₂ MXene composites (PMCs) with a biomimetic structure were prepared and employed as an anticorrosion coating application. First, the PANI was synthesized by oxidative polymerization with ammonium persulfate as the oxidant. Then, 2D Ti₃C₂ MXene nanosheets were prepared by treating the Ti₃AlC₂ using the optimized minimally intensive layer delamination (MILD) method, followed by characterization via XRD and SEM. Subsequently, the PMC was prepared by the oxidative polymerization of aniline monomers in the presence of Ti₃C₂ MXene nanosheets, followed by characterization via FTIR, XRD, SEM, TEM, CV, and UV–Visible. Eventually, the PMC coatings with the artificial biomimetic surface structure of a macaw feather were prepared by the nano-casting technique. The corrosion resistance of the PMC coatings, evaluated via Tafel polarization and Nyquist impedance measurements, shows that increasing the MXene loading up to 5 wt % shifts the corrosion potential (E_corr) on steel from −588 mV to −356 mV vs. SCE, reduces the corrosion current density (I_corr) from 1.09 µA/cm² to 0.035 µA/cm², and raises the impedance modulus at 0.01 Hz from 67 kΩ to 3794 kΩ. When structured with the hierarchical feather topography, the PMC coating (Bio-PA-MX-5) further advances the E_corr to +103.6 mV, lowers the I_corr to 7.22 × 10⁻⁴ µA/cm², and boosts the impedance to 96,875 kΩ. Compared to neat coatings without biomimetic structuring, those with engineered biomimetic surfaces showed significantly improved corrosion protection performance. These enhancements arise from three synergistic mechanisms: (i) polyaniline’s redox catalysis accelerates the formation of a dense passive oxide layer; (ii) MXene nanosheets create a tortuous gas barrier that cuts the oxygen permeability from 11.3 Barrer to 0.9 Barrer; and (iii) the biomimetic surface traps air pockets, raising the water contact angle from 87° to 135°. This integrated approach delivers one of the highest combined corrosion potentials and impedance values reported for thin-film coatings, pointing to a general strategy for durable steel protection. Full article

The robust structure of algal cell walls presents a major barrier in the recovery of fermentable sugars and intracellular lipids for biofuel production. This study investigates the effectiveness of ultraviolet (UV) radiation and UV-assisted hydrogen peroxide (UV/H₂O₂) pretreatment on a local mixed marine algal culture to enhance biofuel production through cell wall disruption. Local mixed cultures of marine microalgae (LMCMA) were pretreated with UV for various exposure times (5–30 min) and with UV/H₂O₂ using H₂O₂ concentrations ranging from 0.88 to 3.53 mM. The impact of pretreatment was evaluated based on morphological changes (SEM and TEM), elemental composition (C, H, N), sugar release, and downstream fermentation yields of ethanol, methanol, 1-propanol, 1-butanol, and 1-pentanol using Saccharomyces cerevisiae. UV pretreatment at 20–30 min yielded the highest carbohydrate release (up to 0.025 g/gDCW), while UV/H₂O₂ at 1.76 mM achieved maximum sugar liberation (0.0411 g/gDCW). Fermentation performance was enhanced under optimized conditions, with peak ethanol yields of 0.3668 g ethanol/g carbohydrates (UV, 30 min, 48 h) and 0.251 g ethanol/g (UV/H₂O₂, 0.88 mM, 24 h). This study also demonstrated selective production of higher alcohols under varying fermentation temperatures (30–37 °C). These findings highlight the potential of combining oxidative pretreatment and process optimization to enhance biofuel recovery from environmentally relevant algal biomass. Full article

Background: Alcohol-associated liver disease (ALD) is a primary global health concern, exacerbated by oxidative stress, inflammation, and gut barrier dysfunction. Conventional phytocompounds exhibit hepatoprotective potential but are hindered by low bioavailability. This study aimed to evaluate the hepatoprotective and gut-barrier-restorative effects of green-synthesized silver nanoparticles (AgNPs) derived from Enicostemma littorale, a medicinal plant known for its antioxidant and anti-inflammatory properties. Methods: AgNPs were synthesized using aqueous leaf extract of E. littorale and characterized using UV-Vis, XRD, FTIR, DLS, and SEM. HepG2 (liver) and Caco-2 (colon) cells were exposed to 0.2 M ethanol, AgNPs (1–100 µg/mL), or both, to simulate ethanol-induced toxicity. A range of in vitro assays was performed to assess cell viability, oxidative stress (H₂DCFDA), nuclear and morphological integrity (DAPI and AO/EtBr staining), lipid accumulation (Oil Red O), and gene expression of pro- and anti-inflammatory, antioxidant, and tight-junction markers using RT-qPCR. Results: Ethanol exposure significantly increased ROS, lipid accumulation, and the expression of inflammatory genes, while decreasing antioxidant enzymes and tight-junction proteins. Green AgNPs at lower concentrations (1 and 10 µg/mL) restored cell viability, reduced ROS levels, preserved nuclear morphology, and downregulated CYP2E1 and SREBP expression. Notably, AgNPs improved the expression of Nrf2, HO-1, ZO-1, and IL-10, and reduced TNF-α and IL-6 expression in both cell lines, indicating protective effects on both liver and intestinal cells. Conclusions: Green-synthesized AgNPs from E. littorale exhibit potent hepatoprotective and gut-barrier-restoring effects through antioxidant, anti-inflammatory, and antilipidemic mechanisms. These findings support the therapeutic potential of plant-based nanoparticles in mitigating ethanol-induced gut–liver axis dysfunction. Full article

This study develops a novel dual-layer chitosan (CS)/pectin film incorporating grape skin anthocyanin extract (GSAE) and lignin to address critical limitations in cherry preservation. Unlike traditional methods that leave harmful residues, this bilayer design separately integrates functional components: GSAE for targeted antioxidant/antibacterial action and lignin for ultraviolet (UV) blocking. This targeted incorporation enables synergistic performance unattainable with single-layer or conventional approaches. The films, fabricated with lignin concentrations from 1% to 15% (w/v), demonstrated excellent mechanical integrity (assessed with structural characterization), optimized gas barrier performance, and effective UV attenuation (achieved via lignin incorporation). Antibacterial analyses confirmed substantial inhibition against Staphylococcus aureus and Escherichia coli. Crucially, cherry preservation tests showed that the 15% lignin film (PG/CL15%) reduced weight loss, preserved firmness, and extended shelf life by 8 days—a significant quantitative improvement over uncoated fruit. Structural characterization (TGA, FT-IR, and XRD) verified successful GSAE/lignin embedding via hydrogen bonding. Beyond cherries, this dual-layer, bio-based design offers a promising template for the active packaging of other perishable produce sensitive to oxidation, microbial spoilage, and UV degradation, which enhances its industrial relevance. Full article

The new generation of food packaging should not only be biodegradable, but also provide additional protective properties for packaged products, extending their shelf life. In this paper, we present the results of research on cast-extruded poly(butylene succinate) (PBS) films coated with hydroxypropyl methylcellulose (HPMC) modified with CO₂ extract from sea buckthorn (ES) or its ethosomes (ET) at amounts of 1 or 5 pph per HPMC. In addition, the developed films were exposed to accelerated aging (UV radiation and elevated temperature) to determine its effect on the films’ properties. Based on SEM, it can be concluded that accelerated aging results in the uncovering of the extract and ethosomes from the coating’s bulk. GPC showed a decrease in the molecular weight of PBS after treatment, additionally amplified by the presence of HPMC. However, the addition of ES or ET in low concentrations reduced the level of polyester degradation. The presence of the modified coating and its treatment increased the oxygen barrier (a decrease from 324 cm³/m² × 24 h for neat PBS to 208 cm³/m² × 24 h for the coated and modified PBS ET5). Despite the presence of colored extract or ethosomes in the coating, the color differences compared with neat PBS were imperceptible (ΔE < 1). The addition of 5 pph of sea buckthorn extract or its ethosomes in combination with accelerated aging resulted in the complete inhibition of the growth of E. coli and S. aureus, which was not observed in non-aged samples. The results obtained demonstrate an improvement in bioactive properties and protection against the negative effects of UV radiation on the film due to the presence of ET or ES in the coating. The developed systems could be used in the food industry as active packaging. Full article

Plateau environments present unique mental health challenges owing to stressors including hypoxia, low temperatures, and intense ultraviolet (UV) radiation. These factors induce structural and functional alterations in the gut microbiota, disrupting gut-brain axis homeostasis and contributing to the higher prevalence of depression in plateau regions relative to flatland areas. For example, studies report that 28.6% of Tibetan adults and 29.2% of children/adolescents on the Qinghai-Tibet Plateau experience depression, with increasing evidence linking this trend to alterations in the gut microbiota. Dysbiosis contributes to depression through three interconnected mechanisms: (1) Neurotransmitter imbalance: Reduced bacterial diversity impairs serotonin synthesis, disrupting emotional regulation. (2) Immune dysregulation: Compromised gut barrier function allows bacterial metabolites to trigger systemic inflammation via toll-like receptor signaling pathways. (3) Metabolic dysfunction: Decreased short-chain fatty acid levels weaken neuroprotection and exacerbate hypothalamic-pituitary-adrenal axis stress responses. Current interventions—including dietary fiber, probiotics, and fecal microbiota transplantation—aim to restore microbiota balance and increase short-chain fatty acids, alleviating depressive symptoms. However, key knowledge gaps remain in understanding the underlying mechanisms and generating population-specific data. In conclusion, existing evidence indicates an association between plateau environments, the gut microbiota, and depression, but causal relationships and underlying mechanisms require further empirical investigation. Integrating multiomics technologies to systematically explore interactions among high-altitude environments, the microbiota and the brain will facilitate the development of precision therapies such as personalized nutrition and tailored probiotics to protect mental health in high-altitude populations. Full article

Four natural bioactive compounds with UV-absorbing properties—curcumin, quercetin, caffeic acid, and hymecromone—were incorporated into pectin-based coatings deposited on oriented polypropylene (OPP) to develop packaging films with UV-shielding capabilities. The effects of both bioactive compounds (used individually or in combination) and coating thickness (δ = 0.12–1.2 μm) on the optical properties (UV-Vis transmittance and haze) of the coated OPP samples were investigated. Coating deposition enhanced the UV-barrier properties in relation to the type of bioactive compound, following the order of caffeic acid > hymecromone > curcumin > quercetin. Regardless of the type of bioactive compound used, no significant changes were observed in clarity, haze, and tensile parameters of OPP, whereas the pectin coatings dramatically improved the oxygen barrier performance of the plastic substrate. Additionally, a greater coating thickness resulted in a lower UV-light transmittance of coated PP films. Although the combination of hymecromone and caffeic acid did not exhibit a synergistic effect, it demonstrated an additive benefit, effectively broadening the wavelength range of UV protection in the final packaging materials. While this study highlights that a performance gap remains compared to commercially available UV-shielding materials, it underscores the potential of replacing synthetic UV-absorbing additives with natural compounds through coating technologies rather than masterbatch incorporation. Full article

With the increasing frequency of ultraviolet (UV) exposure in daily life and the exploration of anti-photoaging strategies, natural plant-derived compounds with anti-skin-aging properties have garnered significant attention. This study aimed to evaluate the efficacy of zein-chitosan-based nanocarriers in enhancing the bioavailability of epigallocatechin gallate (EGCG) and to elucidate its mechanisms in ameliorating skin photoaging. Utilizing a Balb/c mouse model of photoaging, we monitored skin conditions, analyzed skin barrier function parameters, and observed changes in skin tissue structure and collagen fibers through hematoxylin–eosin (H&E) and Masson staining. Immunohistochemical staining was employed to assess COL1A1 levels in the skin, while enzyme-linked immunosorbent assay (ELISA) was used to measure antioxidant enzymes, inflammatory cytokines, matrix metalloproteinases (MMPs), and NF-kB levels. The effects of orally administered EGCG nanoparticles on UV-induced skin aging were investigated. UV exposure significantly increased skin roughness, impaired skin barrier function, thickened the epidermis, reduced collagen content, decreased antioxidant enzyme activity, and elevated levels of inflammatory cytokines, MMPs, and NF-kB in the model group compared to the normal control group. EGCG nanoparticles markedly ameliorated these photoaging manifestations, with some indicators showing superior improvement compared to free EGCG. These findings suggest that EGCG nanoparticles exhibit enhanced anti-photoaging effects over free EGCG, highlighting the potential of nanocarriers as a promising strategy to improve the bioavailability of EGCG. Full article

Squalane (SQ, a saturated, sebum-mimetic hydrocarbon), oleic acid (OA, a monounsaturated fatty acid), and linoleic acid (LA, a polyunsaturated essential fatty acid) belong to the category of “lipids and fats” in cosmetic materials, and are widely employed as skin-conditioning emollients. However, they present differences in UV stress. In this study, we compared their effects on UV-induced oxidative damage, inflammation, and lipid metabolism using a mouse model and human sebaceous gland cells (SZ95). Results showed that 10% SQ did not worsen oxidative damage or inflammation after 6 weeks of UV exposure. In contrast, the 5% and 10% OA/LA groups showed increased skin wrinkling (p < 0.01), epidermal thickening (p < 0.05), and sebaceous gland atrophy. Transcriptome analysis indicated OA/LA upregulated arachidonic acid-related cytokine pathways (PTGS2/IL-1β; p < 0.001). In SZ95 cells, 0.006% OA/LA significantly increased lipid droplet formation (p < 0.001), free fatty acid (FFA) levels (p < 0.001), and pro-inflammatory gene expression (p < 0.001). Conversely, SQ neither promoted lipid droplet/FFA secretion nor induced oxidative stress. These findings suggest that high concentrations of unsaturated fatty acids in skincare may worsen lipid dysregulation and inflammation, while formulations based on saturated hydrocarbons like SQ could provide superior photoaging management by stabilizing skin barrier function. Full article