Search Results (326)

Mechanical friction offers a frequent approach for sustainable energy harvesting, as it can be captured and transformed into electricity by means of the triboelectric phenomenon. Theoretically, this electricity may subsequently be employed to drive electrochemical water purification processes. Herein, the experimental results confirm that the SiC particles effectively trigger the tribocatalytic decomposition of Rhodamine B (RhB). During the tribocatalytic decomposition of dye, mechanical friction is generated at the contact surface between the tribocatalyst and a custom-fabricated polytetrafluoroethylene (PTFE) rotating disk, under varying conditions of stirring speed, temperature, and pH value. Hydroxyl radicals and superoxide radicals are confirmed as the dominant reactive species participating in tribocatalytic dye decomposition, as demonstrated by reactive species inhibition experiments. Furthermore, the SiC particles demonstrate remarkable reusability, even after being subjected to five consecutive recycling processes. The exceptional tribocatalytic performance of SiC particles makes them potentially applicable in water purification by harnessing environmental friction energy. Full article

Ocean energy is an abundant, eco-friendly, and renewable energy resource that is useful for powering sensor networks connected to the maritime Internet of Things (MIoT). These sensor networks can be used to measure different marine environmental parameters that affect ocean infrastructure integrity and harm marine ecosystems. This ocean energy can be harnessed through hybrid nanogenerators that combine triboelectric nanogenerators, electromagnetic generators, piezoelectric nanogenerators, and pyroelectric generators. These nanogenerators have advantages such as high-power density, robust design, easy operating principle, and cost-effective fabrication. However, the performance of these nanogenerators can be affected by the wear of their main components, reduction of wave frequency and amplitude, extreme corrosion, and sea storms. To address these challenges, future research on hybrid nanogenerators must improve their mechanical strength, including materials and packages with anti-corrosion coatings. Herein, we present recent advances in the performance of different hybrid nanogenerators to harvest ocean energy, including various transduction mechanisms. Furthermore, this review reports potential applications of hybrid nanogenerators to power devices in marine infrastructure or serve as self-powered MIoT monitoring sensor networks. This review discusses key challenges that must be addressed to achieve the commercial success of these nanogenerators, regarding design strategies with advanced simulation models or digital twins. Also, these strategies must incorporate new materials that improve the performance, reliability, and integration of future nanogenerator array systems. Thus, optimized hybrid nanogenerators can represent a promising technology for ocean energy harvesting with application in the maritime industry. Full article

Continuous monitoring of environmental and physiological parameters is essential for early diagnostics, real-time decision making, and intelligent system adaptation. Recent advancements in bio-microelectromechanical systems (BioMEMS) sensors have significantly enhanced our ability to track key metrics in real time. However, continuous monitoring demands sustainable energy supply solutions, especially for on-site energy replenishment in areas with limited resources. Artificial intelligence (AI), particularly large language models, offers new avenues for interpreting the vast amounts of data generated by these sensors. Despite this potential, fully integrated systems that combine self-powered BioMEMS sensing with AI-based analytics remain in the early stages of development. This review first examines the evolution of BioMEMS sensors, focusing on advances in sensing materials, micro/nano-scale architectures, and fabrication techniques that enable high sensitivity, flexibility, and biocompatibility for continuous monitoring applications. We then examine recent advances in energy harvesting technologies, such as piezoelectric nanogenerators, triboelectric nanogenerators and moisture electricity generators, which enable self-powered BioMEMS sensors to operate continuously and reducereliance on traditional batteries. Finally, we discuss the role of AI in BioMEMS sensing, particularly in predictive analytics, to analyze continuous monitoring data, identify patterns, trends, and anomalies, and transform this data into actionable insights. This comprehensive analysis aims to provide a roadmap for future continuous BioMEMS sensing, revealing the potential unlocked by combining materials science, energy harvesting, and artificial intelligence. Full article

In this research, a single composite-type stretchable triboelectric nanogenerator (TENG) is proposed for efficient energy harvesting and handwriting recognition. The composite TENGs were fabricated by blending dielectric barium titanate (BT) and conductive carbon nanotubes (CNTs) in varying amounts into a styrene–butadiene rubber matrix. The energy harvesting efficiency depends on the type and amount of fillers, as well as their dispersion within the matrix. Stearic acid modification of BT enables near-nanoscale filler distribution, resulting in high energy conversion efficiencies. The composite achieved power efficiency, power density, charge efficiency, and charge density values of 1.127 nW/N, 8.258 mW/m³, 0.146 nC/N, and 1.072 mC/m³, respectively, under only 2% cyclic compressive strain at 0.85 Hz. The material performs better at low stress–strain ranges, exhibiting higher charge efficiency. The generated charge in the TENG composite is well correlated with the compressive stress, which provides a minimum activation pressure of 0.144 kPa, making it suitable for low-pressure sensing applications. A flat composite with dimensions of 0.02 × 6 × 5 cm³ can produce a power density of 26.04 W/m³, a charge density of 0.205 mC/m³, and an output voltage of 10 V from a single hand pat. The rubber composite also demonstrates high accuracy in handwriting recognition across different individuals, with clear differences in sensitivity curves. Repeated attempts by the same person show minimal deviation (<5%) in writing time. Additionally, the presence of reinforcing fillers enhances mechanical strength and durability, making the composite suitable for long-term cyclic energy harvesting and wearable sensor applications. Full article

Sophisticated energy-harvesting technologies have swiftly progressed, expanding energy supply distribution and leveraging advancements in self-sustaining electronic devices. Despite substantial advancements in friction nanomotors within the last decade, a considerable technical obstacle remains for their flawless incorporation using printed electronics and autonomous devices. Integrating advanced triboelectric nanogenerator (TENG) technology with the rapidly evolving field of composite material 3D printing with has resulted in the advancement of three-dimensionally printed TENGs. Triboelectric nanogenerators are an important part of the next generation of portable energy harvesting and sensing devices that may be used for energy harvesting and artificial intelligence tasks. This paper systematically analyzes the continual development of 3D-printed TENGs and the integration of composite materials. The authors thoroughly review the latest material combinations of composite materials and 3D printing techniques for TENGs. Furthermore, this paper showcases the latest applications, such as using a TENG device to generate energy for electrical devices and harvesting energy from human motions, tactile sensors, and self-sustaining sensing gloves. This paper discusses the obstacles in constructing composite-material-based 3D-printed TENGs and the concerns linked to research and methods for improving electrical output performance. The paper finishes with an assessment of the issues associated with the evolution of 3D-printed TENGs, along with innovations and potential future directions in the dynamic realm of composite-material-based 3D-printed TENGs. Full article

This study analyzes the recent scientific literature on advanced biocompatible materials for triboelectric nanogenerators (TENGs) in biomedical applications. Focusing on materials like synthetic polymers, carbon-based derivatives, and advanced hybrids, the study interprets findings regarding their triboelectric properties and performance influenced by surface texture and additive manufacturing techniques. Major findings reveal that precise control over surface morphology, enabled by additive manufacturing (AM) is promising for optimizing transferred charge density and maximizing TENG efficiency. The analysis highlights the relevance of these material systems and fabrication strategies for developing self-powered wearable and implantable biomedical devices through enabling biocompatible energy-harvesting components that can operate autonomously without external power, underscoring the need for stringent biocompatibility and performance stability. This work synthesizes current progress, identifying critical material and process design parameters for advancing the field of biocompatible TENGs. Full article

Triboelectric nanogenerators (TENGs) hold significant potential for decentralized energy harvesting; however, their dependence on rotational mechanical energy often limits their ability to harness ubiquitous horizontal motion in real-world applications. Here, a single horizontal linear-to-rotational triboelectric nanogenerator (SHLR-TENG) is presented, designed to efficiently convert linear motion into rotational energy using a robust gear system, enabling a high voltage and reliable full cycle of alternating current (AC). The device features a radially patterned disk with triboelectric layers composed of polyimide. The SHLR-TENG achieves a peak-to-peak voltage of 1420 V, a short-circuit current of 117 µA, and an average power output of 41.5 mW, with a surface charge density of 110 µC/m². Moreover, it demonstrates a power density per unit volume of 371.2 W·m⁻³·Hz⁻¹. The device retains 80% efficiency after 1.5 million cycles, demonstrating substantial durability under mechanical stress. These properties enable the SHLR-TENG to directly power commercial LEDs and low-power circuits without the need for energy storage. This study presents an innovative approach to sustainable energy generation by integrating horizontal motion harvesting with rotational energy conversion. The compact and scalable design of the SHLR-TENG, coupled with its resilience to humidity (20–90% RH) and temperature fluctuations (10–70 °C), positions it as a promising next-generation energy source for Internet of Things (IoT) devices and autonomous systems. Full article

High-efficiency wind energy collection and precise wind vector monitoring are crucial for sustainable energy applications, smart agriculture, and environmental management. A novel multi-layered triboelectric–electromagnetic hybrid generator (TEHG) for broadband wind energy collection and wind vector monitoring was built. The TEHG comprises three functional layers corresponding to three modules: a soft-contact rotary triboelectric nanogenerator (S-TEHG), an electromagnetic generator (EMG), and eight flow-induced vibration triboelectric nanogenerators (F-TENGs), which are arranged in a circular array to enable low-wind-speed energy harvesting and multi-directional wind vector monitoring. The TEHG achieves broadband energy harvesting and demonstrates exceptional stability, maintaining a consistent electrical output after 3 h of continuous operation. The EMG charges a 1 mF capacitor to 1.5 V 738 times faster than conventional methods by a boost converter. The TEHG operates for 17.5 s to power a thermohygrometer for 103 s, achieving an average output power of 1.87 W with a power density of 11.2 W/m³, demonstrating an exceptional power supply capability. The F-TENGs can accurately determine the wind direction, with a wind speed detection error below 4.5%. This innovative structure leverages the strengths of both EMG and TENG technologies, offering a durable, multifunctional solution for sustainable energy and intelligent environmental sensing. Full article

This work reports the fabrication and optimization of nylon/multi-walled carbon nanotube (MWCNT) nanocomposite-based triboelectric nanogenerators (TENGs) using a spin coating method. By carefully tuning the MWCNT concentration, the device achieved a substantial enhancement in electrical output, with open-circuit voltage and short-circuit current peaking at 29.7 V and 3.0 μA, respectively, at 0.05 wt% MWCNT loading on the surface of nylon. The corresponding power density reached approximately 13.9 mW/m², representing a significant improvement over pure nylon-based TENGs. The enhanced performance is attributed to improved charge trapping and dielectric properties due to well-dispersed MWCNTs on the surface of nylon, while excessive loading caused agglomeration, reducing efficiency. This lightweight, flexible nanocomposite TENG offers a promising solution for efficient, sustainable energy harvesting in wearable electronics and self-powered sensor systems, highlighting its potential for practical energy applications. Full article

Triboelectric nanogenerators (TENGs), as an emerging energy harvesting device, can efficiently convert the weak mechanical energy in the environment into electrical energy, demonstrating significant potential in self-powered systems. In this study, polyvinylidene fluoride (PVDF) nanofiber films mixed with a small amount of n-propyl gallate (PG) were prepared by using the electrospinning technique, and TENGs were fabricated based on these films. Unexpectedly, experimental results showed that PG (with 0.5–2.5 wt%) did not affect the β phase of the PVDF. However, the TENG based on PVDF/PG composite nanofiber film with 1 wt% PG (PG1-TENG) exhibited large output values of 334 V, 4.36 μA, and 78.4 nC for output voltage, current, and transferred charge, respectively, with a power density of 5.27 W/m², which highlights ~60% improvement in output voltage over pristine PVDF-TENG. This observation was attributed to the unique charge regulation ability of PG, without altering PVDF’s β phase. Furthermore, application potential of PG1-TENG was demonstrated by powering up an LCD calculator and 480 LEDs. Full article

With the rapid rise in Internet of Things (IoT) and artificial intelligence (AI) technologies, there is an increasing need for portable, wearable, and self-powered flexible sensing devices. In such scenarios, self-powered nanogenerators have emerged as promising energy harvesters capable of converting ambient mechanical stimuli into electrical energy, enabling the development of autonomous flexible sensors and sustainable systems. This review highlights recent advances in nanogenerator technologies—particularly those based on piezoelectric and triboelectric effects—with a focus on soft, flexible, and gel-based polymer materials. Key mechanisms of energy conversion are discussed alongside strategies to enhance performance through material innovation, structural design, and device integration. Special attention is given to the role of gel-type composites, which offer unique advantages such as mechanical tunability, self-healing ability, and biocompatibility, making them highly suitable for next-generation wearable, biomedical, and environmental sensing applications. We also explore the evolving landscape of energy applications, from microscale sensors to large-area systems, and identify critical challenges and opportunities for future research. By synthesizing progress across materials, mechanisms, and application domains, this review aims to guide the rational design of high-performance, sustainable nanogenerators for the next era of energy technologies. Full article

Since 2015, research on liquid–solid triboelectric nanogenerators (L-S TENGs) has shown steady growth, with the primary focus on application domains such as engineering, physics, materials science, and chemistry. These applications have underscored the significant attention L-S TENGs have garnered in areas like human–nature interaction, energy harvesting, data sensing, and enhancing living conditions. Presently, doping composite dielectric materials and surface modification techniques are the predominant methods for improving the power generation capacity of TENGs, particularly L-S TENGs. However, studies exploring the combined effects of these two approaches to enhance the power generation capacity of TENGs remain relatively scarce. Following a review of existing literature on the use of composite material doping and surface modification to improve the power generation performance of L-S TENGs, this paper proposes an experimental framework termed “self-assembled surface TENG@carbonyl iron particle doping (SAS-TENG@CIP)” to investigate the integrated power generation effects of L-S TENGs when combining these two methods. Research cases and data results indicate that, for TENGs exhibiting capacitor-like properties, the enhancement of power generation performance through composite material doping and superhydrophobic surface modification is not limitless. Each process possesses its own inherent threshold. When these thresholds are surpassed, the percolation of current induced by material doping and electrostatic breakdown (EB) triggered by surface modification can lead to a notable decline in the power output capacity of L-S TENGs. Consequently, in practical applications moving forward, fully realizing the synergistic potential of these methods necessitates a profound understanding of the underlying scientific mechanisms. The conclusions and insights presented in this paper may facilitate their complex integration and contribute to enhancing power generation efficiency in future research. Full article

This study proposes a novel capacitor-based energy representation model for triboelectric nanogenerators (TENGs). Using this model, the energy conversion behavior of contact–separation-mode TENGs (CS-TENGs) is analyzed with particular attention to their inherent dual-capacitor structure. According to the relationship of high-voltage and high-energy output characteristics of CS-TENGs, a specialized energy harvesting circuit is designed, featuring a dual high-voltage switch that enables bidirectional charge transfer and efficient electromagnetic energy conversion. This switch forms the core of a new rectifier bridge and energy storage topology optimized for intermittent mechanical inputs. Experimental results confirm the validity of the proposed energy model and demonstrate that the developed topology significantly enhances energy harvesting and storage efficiency. The integration of theoretical modeling with circuit innovation offers a comprehensive and effective strategy for improving the electrical performance of CS-TENG systems. This work bridges the theoretical gap in dual-capacitor modeling with a practical rectifier design, offering an integrated solution for real-world TENG energy harvesting challenges. Full article

Electroactive polymers (EAPs) have emerged as versatile materials for self-powered actuators and biosensors, revolutionizing biomedical diagnostics and healthcare technologies. These materials harness various energy harvesting mechanisms, including piezoelectricity, triboelectricity, and ionic conductivity, to enable real-time, energy-efficient, and autonomous sensing and actuation without external power sources. This review explores recent advancements in EAP-based self-powered systems, focusing on their applications in biosensing, soft robotics, and biomedical actuation. The integration of nanomaterials, flexible electronics, and wireless communication technologies has significantly enhanced their sensitivity, durability, and multifunctionality, making them ideal for next-generation wearable and implantable medical devices. Additionally, this review discusses key challenges, including material stability, biocompatibility, and optimization strategies for enhanced performance. Future perspectives on the clinical translation of EAP-based actuators and biosensors are also highlighted, emphasizing their potential to transform smart healthcare and bioelectronic applications. Full article

The currently used electrical energy devices for portable applications are in limited life and need of frequent recharging, it is a big bottleneck for wireless and transportation systems. The scientific community is motivated to find innovative and efficient devices to convert environmental energy into useful forms. Nanogenerator can mitigate this issue by harvesting ambient energy of different forms into useful electrical energy. Particularly flexible nanogenerators can efficiently convert ambient mechanical energy into electrical energy which can be fruitfully used for self-powered sensors and electronic appliances. Zinc oxide is an interesting photosensitive and piezoelectric material that is expected to play a vital role in the synergetic harvesting of environmental thermal, sound, mechanical, and solar energies. As ZnO can be synthesized using easy methods and materials at low cost, the conversion efficiencies of solar and other energy forms can increase considerably. ZnO is a versatile material with interesting semiconducting, optical, and piezoelectric properties; it can be used advantageously to harvest more than one type of ambient energy. The coupled semiconducting and piezoelectric properties of ZnO are attractive for fabricating nanogenerators capable of harvesting both ambient optical and mechanical energies simultaneously. These nanolevel conversion devices are much required to power remote and implantable devices without the need for additional power sources. The present review briefly discusses the principles and mechanisms of different energy harvesting abilities of ZnO nanorods and their composites by consolidating available literature. In addition, the developments taking place in nanogenerators of different kinds—such as photovoltaic, piezoelectric, pyroelectric, and triboelectrics for self-powered technology—and their progress in hybrid energy harvesting application is reviewed. Full article