Search Results (723)

The discovery of cathode materials that simultaneously exhibit high oxygen-reduction activity, robust stability, and low cost is pivotal to moving solid oxide fuel cells (SOFCs) from the laboratory into commercial deployment. To address this challenge, we compile the largest perovskite dataset to date parameterized by the oxygen tracer surface exchange coefficient (k^*). Using only readily obtainable elemental and structural descriptors, we develop machine-learning models that surpass existing approaches in both accuracy and computational efficiency. Specifically, by integrating Mahalanobis-distance-based applicability-domain analysis with random forest-enhanced property descriptors and support vector regression, we high-throughput-screen 1.3 million ABO3 compositions and curate a candidate list that balances thermodynamic stability, cost, and oxygen-reduction activity. Beyond prediction accuracy, SHAP interpretation reveals strong physical correlations between the enhanced descriptors and k^*, highlighting the coefficient of thermal expansion, O p-band center, and A-site ionic radius as the dominant factors governing oxygen exchange kinetics. Finally, we identify 209 promising perovskite cathodes predicted to outperform LSC in the low-temperature regime, offering promising directions for experimental realization of practical low-temperature SOFCs. Full article

Salinization represents a significant threat to freshwater resources worldwide, compromising water quality and security. In the Vieira de Leiria–Marinha Grande aquifer, salinization mechanisms are a complex interaction between seawater intrusion and evaporite dissolution. Near the coast, groundwater is mainly influenced by seawater, evidenced by Na-Cl hydrochemical facies, high electrical conductivity, and Na⁺/Cl⁻, Cl⁻/Br⁻ and SO₄^2−/Cl⁻ molar ratios consistent with marine signatures. In areas affected by diapiric dissolution, besides elevated electrical conductivity, groundwater is enriched in SO₄²⁻ and Ca²⁺ and in minor elements like K⁺, Li⁺, B³⁺, Ba²⁺ and Sr²⁺, and high SO₄²⁻/Cl⁻ and Ca²⁺/HCO₃⁻ molar ratios, indicative of gypsum/anhydrite dissolution. The relationship between δ¹⁸O and electrical conductivity further supports the identification of distinct salinity sources. This study integrates hydrogeochemical tracers to investigate hydrochemical evolution in the aquifer with increasing residence time and influence of water–rock interaction, as well as the accurate characterization of salinization mechanisms in multilayer aquifers. A comprehensive understanding of these processes is essential for identifying vulnerable zones and developing effective management strategies to ensure the protection and sustainable use of groundwater resources. Full article

In this study, a novel and efficient solid-state additive manufacturing technique, friction rolling additive manufacturing (FRAM), was employed to fabricate an aluminum alloy ring component, significantly reducing process complexity and mitigating solidification defects typical of melt-based techniques. However, previous studies on FRAM have primarily focused on the microstructural characteristics and mechanical properties of flat components, with limited attention paid to ring-shaped components. Owing to the unique geometric constraints imposed during the forming process, ring components exhibit markedly different microstructural evolution and defect formation mechanisms compared with flat counterparts, and these mechanisms remain insufficiently and systematically understood. To address this knowledge gap, the coupled Eulerian–Lagrangian (CEL) method was introduced for the first time to numerically simulate the temperature distribution and residual stress evolution during the FRAM process of ring-shaped components. In addition, tracer particles were incorporated into the simulations to analyze the material flow behavior, thereby systematically elucidating the forming behavior and microstructural evolution characteristics under geometric constraint conditions. Moreover, scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) were employed to systematically characterize the microstructural evolution and defect morphology. The CEL numerical simulations exhibited good consistency with the experimental observations, demonstrating the reliability and accuracy of the simulation method. The results showed that the peak temperatures were primarily concentrated at the advancing side of the rotation tool, and the temperature on the outer diameter side of the ring was consistently higher than that on the inner diameter side. The lack of shoulder friction on the inner side led to an increased heat dissipation rate, thereby resulting in higher residual stress compared to other regions. The particle analysis revealed that, due to ring geometry, material flow varied across radial regions, resulting in distinct microstructures. Further EBSD analysis revealed that, after the rotating tool passed, the material first developed a preferential orientation with {111} planes parallel to the shear direction, and with more layers, dynamic recrystallization produced an equiaxed grain structure. This study provides a theoretical basis and process reference for the application of the FRAM technique in the manufacturing of large ring components. Full article

Background: Three-dimensional (3D) cancer models are currently essential tools in high-throughput screening (HTS), serving as a bridge between in vitro and in vivo approaches during drug development. Even though spheroids offer many advantages over 2D cultures, analyzing 3D cultures with heterogeneous morphology remains challenging due to the lack of standardized visualization techniques and multiparameter analysis. Methods: In this work, an optimized CellProfiler pipeline and a Python algorithm for weighting morphological features are used to visualize, extract, and analyze morphological data from spheroids derived from colorectal and pancreatic cancer cell lines with diverse morphologies (HCT116, LoVo, PANC-1, and CFPAC-1). Results: We developed a feature weighting process that combines multiple morphological parameters into a single metric using principal component analysis (PCA). There is a strong correlation between this process and a standard Alamar Blue proliferation assay (r = 0.89, ρ = 0.91, p < 0.001). Using this method, we were able to ascertain the IC₅₀ values of substances that did not produce results in cell lines with heterogeneous morphology (LoVo and CFPAC-1) using a standard proliferation assay. Conclusions: By removing the need for tracer dyes, the resulting methodology may lower costs while accelerating preclinical drug development through informative multiparameter analysis of compound efficacy. Full article

The use of agrochemicals remains indispensable for ensuring fruit production; however, their excessive or inefficient application poses significant environmental and health concerns. Rapid detection of spray deposition is crucial for assessing sprayer performance, improving precision application, and reducing drift and chemical waste. In this context, real-time monitoring technologies represent a promising tool to promote sustainable and efficient crop protection practices. This study refines previous experiences with an array of resistive sensors to quickly measure spray deposition. First, a multi-point calibration curve is introduced to improve the sensors’ accuracy. Furthermore, a multiplexed acquisition system (Sciospec ISX-5) is employed to enable time-resolved measurements of the whole sensor array. The method is validated by spectrophotometry and weight measurements. Wind tunnel trials with fluorescein (FLU) and fluorescein + potassium chloride (FLU + KCl) tracing solutions were conducted. The conductivity of the latter was higher than the former, without biasing the measurement. Both tracers showed good correlation between deposition and conductivity (R² = 0.997 for FLU and 0.995 for FLU + KCl), and the maximum deviation from the spectrophotometric estimates was <10%. Time-resolved measurement showed the build-up of deposition over time, potentially indicating the dimensional composition of the sprayed cloud. The improved workflow provides array-wide, sequential deposition measurements, enabling faster on-site acquisition and efficient analysis. The results demonstrate strong potential for scaling the method to field applications, supporting its further development into real-time deposition mapping tools that could guide precision spraying, optimize agrochemical use, and reduce environmental drift. Full article

Radionuclide-based molecular imaging modalities are active and developing areas of functional and molecular diagnosis. Among the radionuclides used for SPECT imaging in oncology, ^99mTc is a leading candidate for radiolabeling. At present, a sufficient number of complexons for ^99mTc have been described; however, the development of effective delivery systems for this isotope to the area of interest is a complex research task. The use of tumor-targeting molecules as carriers for radioactive tracers is an effective strategy that has enabled the development of many novel radiopharmaceuticals for cancer imaging. Background: To date, a number of studies have shown tumorotropicity of tetrapyrrole compounds to tumor tissues, in particular derivatives of natural chlorophyll A. Methods: Purification was performed using solid-phase extraction. Assessment of radiochemical yield and purity was performed via radio-ITLC. The in vitro tumor cell accumulation was assessed using SKOV-3 and A-431 cell lines. Dose-dependent biodistribution was evaluated in Nu/J mice bearing epidermoid carcinoma (A-431) xenografts. Results: In this work, we obtained complexes with ^99mTc based on water-soluble carboxylate chlorin e₆ derivatives in order to evaluate their potential for use as SPECT radiopharmaceuticals. We performed radiolabelling optimization of a series of the novel chlorins and primary preclinical studies, including an assessment of the effect of their lipophilicity and charge on tumor uptake. Conclusions: Modification of the periphery of the chlorin macrocycle with chelating groups allows for complexing a wide range of metals, including ^99mTc, which can be used for targeted delivery of the radionuclide to the area of interest. Full article

Current tumor diagnostics rely on fluorodeoxyglucose (FDG)-PET imaging, but FDG’s short half-life and high cost limit its widespread use. Infrared (IR) probes are emerging as non-radioactive alternatives to conventional tracers for tissue section and other in vitro imaging applications. Because cells and tissues are relatively free of absorption peaks between 1800 and 2200 cm⁻¹, metal-carbonyl complexes, especially cyclopentadienylrhenium(I) tricarbonyl (Cp[Re(CO)₃]) derivatives, absorb strongly in this window and provide robust platforms for bioconjugation. Furthermore, Cp[Re(CO)₃] fragments can be introduced into organic substrates via an elegant three-component reaction that simultaneously forges the cyclopentadienyl-metal and cyclopentadienyl-substituent bonds. As a result, the functionalized half-sandwich complex is obtained in a single step without any special handling issues. We have therefore properly modified a glucose molecule with that complex and developed a novel glucoconjugated Cp[Re(CO)₃] probe that enables IR-based visualization of diseased cells at 2100 cm⁻¹, offering a non-invasive, non-radioactive histological tool and a promising basis for future medical imaging devices. Full article

Background and Clinical Significance: Isoechoic renal tumors, defined as masses demonstrating echogenicity similar to normal renal parenchyma, represent a significant diagnostic challenge in contemporary ultrasonographic practice. These lesions, occurring in 5–12% of all renal masses, frequently escape detection on conventional ultrasound, leading to delayed diagnosis and potentially adverse oncological outcomes. Isoechoic renal tumors encompass both benign and malignant entities, with clear cell renal cell carcinoma representing 65–70% of malignant cases. Conventional ultrasound shows limited sensitivity (48–67%) for detecting isoechoic masses, while contrast-enhanced ultrasound achieves detection rates of 94–98%. Multiparametric MRI and dual-energy CT provide superior characterization, with accuracy rates of 85–92% for differentiating benign from malignant lesions. Case Presentation: We describe the case of an 80-year-old male in whom a 2.4 cm isoechoic renal mass was incidentally detected during abdominal ultrasound performed for chronic kidney disease monitoring. Contrast-enhanced CT confirmed a solid, hypervascular lesion with wash-out characteristics. Given the patient’s age, comorbidities, and tumor characteristics, multidisciplinary evaluation led to an active surveillance strategy. At 6-month follow-up, the lesion remained stable. Conclusions: Isoechoic renal tumors require multimodal diagnostic approaches and individualized management strategies. Emerging technologies, including artificial intelligence-enhanced ultrasound systems and radiomic-based decision support tools, are undergoing clinical validation and may improve detection and characterization. Investigational approaches such as liquid biopsy and novel PET tracers targeting carbonic anhydrase IX are in early development. Translation of these technologies into clinical practice will require prospective validation, standardization of protocols, and demonstration of cost-effectiveness. Full article

Contemporary nurseries of fruit trees and ornamental plants constitute a key component in the production of high-quality planting material. At present, conventional technology dominates in nurseries in Poland and throughout the European Union. It is based on universal agricultural tractors working with numerous specialized machines—typically underutilized—including sprayers, inter-row cultivation equipment, fertilizer spreaders, and tree lifters. This concept entails several limitations and high investment costs. Because of the considerable size and turning radius of such machinery, a dense network of service roads (every 15–18 m) and wide headlands must be maintained. These areas, which constitute approximately 20% of the total surface, are effectively wasted yet require continuous agronomic maintenance. An alternative concept employs a set of implements mounted on a high-clearance portal tractor (1.6–1.8 m), forming a specialized unit capable of moving above the rows of nursery crops. The study objective of the research was to evaluate the air distribution generated by an air-jet system installed on a crop-spray boom mounted on a portal sprayer, and to assess spray deposition during treatments in nursery trees. Such a configuration enables the mechanization of a broader range of nursery operations than currently possible, while reducing investment costs compared with conventional technology. One still underutilized technology consists of sprayers with an auxiliary airflow (AA) generated by air sleeves. Mean air velocity was measured in three vertical planes, and they showed lower air velocity between 1.0 m and 5.5 m. Spray deposition on apple nursery trees was assessed using a fluorescent tracer. The experimental design consists of a comparative field experiment with and without air flow support, spraying at two standard working rates (200 and 400 L·ha⁻¹) and determining the application of the liquid to plants in the nursery. The results demonstrated a positive effect of the AA system on deposition. At a travel speed of 6.0 km·h⁻¹ and an application rate of 200 L·ha⁻¹, deposition on the upper leaf surface was 68% higher with the fan engaged. For a 400 L·ha⁻¹ rate, deposition increased by 47%, with both differences statistically significant. The study showed that the nursery sprayer mounted on a high-clearance portal tractor and equipped with an AA system achieved an increase of 58% in spray deposition on the upper leaf surface when the fan was operating at 200 L·ha⁻¹ and 28% at 400 L·ha⁻¹. Substantial differences were found between deposition on the upper and lower leaf surfaces, with the former being 20–30 times greater. Given the complexity of nursery production technology, sprayers that ensure the highest possible biological efficacy and high quality of nursery material will play a pivotal role in its development. At the current stage, AA technology fulfils these requirements. Full article

Glomerular filtration rate (GFR) is a key indicator of renal function. Traditional methods for GFR measurement have limitations including invasiveness, low spatial resolution, and lengthy protocols. Positron emission tomography (PET) radiotracers have emerged as promising tools for non-invasive, accurate, and dynamic renal function assessment. Objectives: This systematic literature review evaluates the clinical utility, and current evidence surrounding PET radiotracers used for GFR measurement in humans, emphasizing advances over conventional renal imaging modalities. Methods: A systematic literature search was conducted in PubMed, Web of Science, and Scopus, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, from database inception to November 2024. The search identified studies evaluating PET-based measurement of glomerular filtration rate (GFR) and renal perfusion. Inclusion criteria encompassed human studies using PET radiotracers (e.g., ⁶⁸Ga, ¹⁸F) with comparisons to reference standards (estimated GFR or serum creatinine). Two authors independently screened titles/abstracts, extracted data, and assessed bias using Quality Assessment of Diagnostic Accuracy Studies tool (QUADAS-2). Exclusions included animal studies, reviews, and non-English articles. Results: Eleven studies met inclusion criteria, with ⁶⁸Ga-EDTA showing the highest validation against reference standards such as ⁵¹Cr-EDTA plasma clearance, demonstrating strong correlation. PET imaging offered superior spatial–temporal resolution, enabling accurate split renal function assessment and quantitative analysis of both filtration and perfusion. ⁶⁸Ga-somatostatin analogues exhibited moderate correlations between renal SUV and estimated GFR, with post-PRRT uptake changes indicating early nephrotoxicity. Among novel tracers, ⁶⁸Ga-FAPI showed a strong inverse SUV–GFR relationship, reflecting renal fibrosis and suggesting potential as a chronic kidney disease (CKD) biomarker but requires further clinical validation. Limitations across studies include small sample sizes, retrospective designs, and variability in reference standards. Conclusions: PET radiotracers, particularly ⁶⁸Ga-EDTA, represent a significant advancement for non-invasive, quantitative GFR measurement with improved precision and renal anatomical detail compared to traditional methods. Future prospective, large-scale human studies with standardized protocols are needed to establish these PET tracers as routine clinical tools in nephrology. Integration of hybrid PET/MRI and novel tracer development may further enhance renal diagnostic capabilities. Full article

Gel treatments have been widely applied to control water production in oil and gas reservoirs. However, for water shutoff in dense gas reservoirs, most gel-based treatments focus on individual wells rather than the entire reservoir, exhibiting limited treatment depth, poor durability, and inadequate repeatability Notably, formation damage is a primary consideration in treatment design—most dense gas reservoirs have a permeability of less than 1 mD, making them highly susceptible to damage by formation water, let alone viscous polymer gels. Constrained by well completion methods, gelant can only be bullheaded into deep gas wells in most scenarios. Due to the poor gas/water selective plugging capability of conventional gels, the injected gelant tends to enter both gas and water zones, simultaneously plugging fluid flow in both. Although several techniques have been developed to re-establish gas flow paths post-treatment, treating gas-producing zones remains risky when no effective barrier exists between water and gas strata. Additionally, most water/gas selective plugging materials lack sufficient thermal stability under high-temperature and high-salinity (HTHS) gas reservoir conditions, and their injectivity and field feasibility still require further optimization. To address these challenges, treatment design should be optimized using non-selective gel materials, shifting the focus from directly preventing formation water invasion into individual wells to mitigating or slowing water invasion across the entire gas reservoir. This approach can be achieved by placing large-volume gels along major water flow paths via fully watered-out wells located at structurally lower positions. Furthermore, the drainage capacity of these wells can be preserved by displacing the gel slug to the far-wellbore region, thereby dissipating water-driven energy. This study evaluates the viability of placing gels in fully watered-out wells at structurally lower positions in an edge-water drive gas reservoir to slow water invasion into structurally higher production wells interconnected via numerous microfractures and high-permeability streaks. The gel system primarily comprises polyethyleneimine (PEI), a terpolymer, and nanofibers. Key properties of the gel system are as follows: Static gelation time: 6 h; Elastic modulus of fully crosslinked gel: 8.6 Pa; Thermal stability: Stable in formation water at 130 °C for over 3 months; Injectivity: Easily placed in a 219 mD rock matrix with an injection pressure gradient of 0.8 MPa/m at an injection rate of 1 mL/min; and Plugging performance: Excellent sealing effect on microfractures, with a water breakthrough pressure gradient of 2.25 MPa/m in 0.1 mm fractures. During field implementation, cyclic gelant injections combined with over-displacement techniques were employed to push the gel slug deep into the reservoir while maintaining well drainage capacity. The total volumes of injected fluid and gelant were 2865 m³ and 1400 m³, respectively. Production data and tracer test results from adjacent wells confirmed that the water invasion rate was successfully reduced from 59 m/d to 35 m/d. The pilot test results validate that placing gels in fully watered-out wells at structurally lower positions is a viable strategy to protect the production of gas wells at structurally higher positions. Full article

Effective placement of liquid bioproducts in the root zone is essential for improving plant health and productivity in organic strawberry cultivation, yet subsurface application is often constrained by soil compaction typical of perennial production systems. This study evaluated the penetration behaviour of a fluorescent tracer solution applied using a newly developed subsurface applicator equipped with a disc coulter and integrated with an interrow cultivator. Field experiments were conducted on loamy sand prepared at three compaction levels: COMPACTED, NATURAL and LOOSE. Liquid distribution was assessed using UV fluorescence imaging and quantitative image analysis in ImageJ, enabling measurement of both penetration depth and cross-sectional wetted area. Soil physical properties including bulk density, porosity, hydraulic conductivity (permeability), water-holding capacity, and mechanical resistance were analyzed alongside liquid infiltration patterns. Results showed that soil compaction substantially limited both the depth and spread of the injected liquid, whereas loosening the soil prior to application significantly enhanced bioproduct placement within the target 15–20 cm root zone. Correlation analysis confirmed strong relationships between soil structure and liquid behaviour. The integrated loosening–application system demonstrates considerable potential for precise, efficient in-soil delivery of liquid bioproducts in organic strawberry production. Full article

Chlorine contact tanks are crucial for wastewater disinfection, with performance strongly influenced by internal hydraulic characteristics. This study applies Computational Fluid Dynamics (CFD) to analyze and improve the hydraulics of the chlorination contact tank in a Wastewater Treatment Plant in the Southern Italy. A three-dimensional transient CFD model was developed using the Reynolds-Averaged Navier–Stokes (RANS) equations with the Renormalized Group (RNG) turbulence closure. The model simulated flow patterns, tracer transport, and chlorine decay kinetics under the existing configuration and two alternative configurations. Conservative tracer pulse simulations enabled the calculation of Residence Time Distributions (RTDs) and hydraulic efficiency indicators, including the Baffling Factor (θ₁₀), Morrill index (Mo), and Aral–Demirel index (AD). A typical contact tanks geometry exhibits specific hydraulic characteristics, including recirculation behind baffles and stagnant zones in sharp corners, which inevitably affects the contact time. The first alternative, namely featuring rounded corners, moderately reduced dead zones, but did not substantially mitigate recirculation. The second alternative, herein called combining rounded corners with perforated baffle walls, substantially improved hydraulic performance, yielding flow patterns closer to plug-flow. RTD peaks were higher and narrower for the modified designs, and hydraulic indices improved, with Mo decreasing by approximately 5%. These hydraulic enhancements are expected to increase disinfection efficiency by providing more uniform chlorine exposure. The results demonstrate that geometric modifications effectively optimize contact tank hydraulics and highlight the role of CFD as a design and retrofit tool for water and wastewater disinfection systems. Full article

The escalating sea-level rise associated with global climate change increasingly threatens estuary regions with salinity intrusion, particularly in complex river network systems where both ecological integrity and socio-economic development are at risk. While tracer techniques are commonly employed in salinity intrusion research, numerical models capable of quantifying multi-source contributions and tracing intrusion pathways in such complex settings remain underdeveloped. This study introduces a multi-source tracer-aided modeling approach to analyze and mitigate salinity intrusion, enabling quantification of the relative contributions of various salinity sources at targeted locations. Using the Telemac-2D hydrodynamic model, we simulated salinity intrusion in the Xinbu Island estuary, Hainan Province, China. A multi-source particle tracer method was implemented to delineate intrusion pathways, leading to the formulation of targeted control strategies based on simulation outcomes. Results demonstrate that measures informed by source proportion and intrusion path analysis are highly effective: under discharge conditions of 181 m³/s and 296 m³/s, salinity levels in the northern river network were significantly reduced. This study provides a valuable framework for addressing similar salinity challenges in vulnerable estuarine environments worldwide. Full article

Parkinson’s disease (PD) is a multifaceted neurodegenerative disorder characterized by dopaminergic neuronal loss and widespread α-synuclein pathology. Nuclear medicine imaging offers essential in vivo tools for early diagnosis, differential assessment, and monitoring disease progression. This review summarizes key PET and SPECT radiotracers targeting dopaminergic synthesis and transport, vesicular storage, post-synaptic receptors, neuroinflammation, and protein aggregation, highlighting their roles in clinical evaluation and phenotyping. Clinically, these modalities support earlier recognition of PD, distinction from atypical parkinsonian syndromes, and assessment of non-motor involvement. Future directions include the development of selective α-synuclein tracers and multimodal imaging strategies to refine prodromal detection and guide personalized therapeutic interventions. Full article