Search Results (1,411)

Background: The effect of antibiotics can be severely affected by external factors. Combining the oxidative impact of photodynamic therapy with antibiotics is largely unexplored, which may result in positive results with great impact on clinical applications. In particular, that can be relevant in the case of antibiotic resistance. Objectives: In this study, we examined the effects of aPDT using the photosensitizers (PSs), methylene blue (MB) or Photodithazine (PDZ), both alone and in combination with the antibiotics ciprofloxacin (CIP), gentamicin (GEN), and ceftriaxone (CEF), against the Gram-negative bacterium Klebsiella pneumoniae. Methods: A standard suspension of K. pneumoniae was subjected to PDT with varying doses of MB and PDZ solutions, using a 75 mW/cm² LED emitting at 660 nm with an energy of 15 J/cm². The MICs of CIP, GEN, and CEF were determined using the broth dilution method. We also tested the photosensitizers MB or PDZ as potentiating agents for synergistic combinations with antibiotics CIP, GEN, and CEF against K. pneumoniae. Results: The results showed that MB was more effective in inhibiting survival and killing K. pneumoniae compared to PDZ. The tested antibiotics CIP, GEN, and CEF suppressed bacterial growth (as shown by reduced MIC values) and effectively killed K. pneumoniae (reduced Log CFU/mL). While antibiotic treatment or aPDT alone showed a moderate effect (1 Log₁₀ to 2 Log₁₀ CFU reduction) on killing K. pneumoniae, the combination therapy significantly increased bacterial death, resulting in a ≥3 Log₁₀ to 6 Log₁₀ CFU reduction. Conclusions: Our study indicates that pre-treating bacteria with PDT makes them more susceptible to antibiotics and could serve as an alternative for treating local infections caused by resistant bacteria or even reduce the required antibiotic dosage. This work explores numerous possible combinations of PDT and antibiotics, emphasizing their interdependence in controlling infections and the unique properties each PS-antibiotic combination offers. Clinical application for the combination is a promising reality since both are individually already adopted in clinical use. Full article

This study describes a quite special and interesting atmospheric event characterized by the simultaneous presence of fresh and aged smoke layers. These peculiar conditions occurred on 16 July 2024 at the CNR-IMAA atmospheric observatory (CIAO) in Potenza (Italy), and represent an ideal case for the evaluation of the impact of aging and transport mechanisms on both the optical and microphysical properties of biomass burning aerosol. The fresh smoke was originated by a local wildfire about 2 km from the measurement site and observed about one hour after its ignition. The other smoke layer was due to a wide wildfire occurring in Canada that, according to backward trajectory analysis, traveled for about 5–6 days before reaching the observatory. Synergetic use of lidar, ceilometer, radar, and microwave radiometer measurements revealed that particles from the local wildfire, located at about 3 km a.s.l., acted as condensation nuclei for cloud formation as a result of high humidity concentrations at this altitude range. Optical characterization of the fresh smoke layer based on Raman lidar measurements provided lidar ratio (LR) values of 46 ± 4 sr and 34 ± 3 sr, at 355 and 532 nm, respectively. The particle linear depolarization ratio (PLDR) at 532 nm was 0.067 ± 0.002, while backscatter-related Ångström exponent (AEβ) values were 1.21 ± 0.03, 1.23 ± 0.03, and 1.22 ± 0.04 in the spectral ranges of 355–532 nm, 355–1064 nm and 532–1064 nm, respectively. Microphysical inversion caused by these intensive optical parameters indicates a low contribution of black carbon (BC) and, despite their small size, particles remained outside the ultrafine range. Moreover, a combined use of CIAO remote sensing and in situ instrumentation shows that the particle properties are affected by humidity variations, thus suggesting a marked particle hygroscopic behavior. In contrast, the smoke plume from the Canadian wildfire traveled at altitudes between 6 and 8 km a.s.l., remaining unaffected by local humidity. Absorption in this case was higher, and, as observed in other aged wildfires, the LR at 532 nm was larger than that at 355 nm. Specifically, the LR at 355 nm was 55 ± 2 sr, while at 532 nm it was 82 ± 3 sr. The AEβ values were 1.77 ± 0.13 and 1.41 ± 0.07 at 355–532 nm and 532–1064 nm, respectively and the PLDR at 532 nm was 0.040 ± 0.003. Microphysical analysis suggests the presence of larger, yet much more absorbent particles. This analysis indicates that both optical and microphysical properties of smoke can vary significantly depending on its origin, persistence, and transport in the atmosphere. These factors that must be carefully incorporated into future climate models, especially considering the frequent occurrences of fire events worldwide. Full article

This paper presents the results of an investigation into the catalytic activity and selectivity of rhodium-based catalysts supported on natural zeolite clinoptilolite from the Shankanai field (Kazakhstan) in the dehydrogenation of light alkanes from associated petroleum gas (APG). Three modifications of the catalyst have been studied: basic 1%Rh/HCpt, modified with tin 1%Rh/10%SnO/HCpt, and combined with additives of tin and potassium 1%Rh/10%SnO/5%K₂O/HCpt. It has been shown that the addition of tin contributes to increased thermal stability and a decreased coking rate, while the addition of potassium suppresses side reactions (cracking and isomerization), increasing the selectivity for olefins. The highest yield of olefins (~30%) is achieved with the 1%Rh/10%SnO/5%K₂O/HCpt catalyst in the presence of water vapor. Using scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM), improved distribution of active components and reduced catalyst deactivation have been confirmed. The obtained data demonstrate the potential of the developed systems for the efficient processing of APG and the selective synthesis of olefins. Full article

Adipic acid (AA), a pivotal precursor for nylon-6,6 and polyurethane, was synthesized via an innovative catalytic electrocatalytic oxidation strategy in this study. Four distinct MnO_x/CNT nanocatalysts were prepared by hydrothermal and co-precipitation methods and fabricated into electrodes for the oxidation of cyclohexanol (Cy-OH) in a K₂SO₄ neutral solution. Comprehensive characterization revealed that the catalytic performance depended on both crystalline phase configuration and manganese valence states. MnO(OH) and MnO_x were identified as the main active species, with the synergy between MnO species and carbon nanotubes significantly enhancing catalytic activity. Mechanistic investigations demonstrated that under Mn⁴⁺-dominant conditions, low-valence manganese species facilitated Cy-OH-to-cyclohexanone (Cy=O) conversion, while an optimal O_ads/O_lat ratio (≈1) effectively promoted subsequent Cy=O oxidation to AA. Under optimized conditions (1.25 V vs. Ag/AgCl, 80 °C, 15 h), complete Cy-OH conversion was achieved with 56.4% AA yield and exceptional Faradaic efficiency exceeding 94%. This work elucidates manganese-based electrocatalytic oxidation mechanisms, proposes a sequential reaction pathway, and establishes an environmentally benign synthesis protocol for AA, advancing sustainable industrial chemistry. Full article

ZnO/SiC nanocomposite materials possess significant potential for various technological fields due to their extraordinary optical, electrical, thermal, and mechanical properties. The synthesis methods, material properties, and diverse applications of ZnO/SiC composites have been systematically explored in this study. The potential application areas of this nanocomposite include their roles in photocatalysis, optoelectronic devices, gas sensors, and photovoltaic systems. The synergetic effects of ZnO and SiC are analyzed to highlight their advantages over their individual components. Future research directions must focus on the remaining challenges to optimize these nanoscale composite materials for industrial and emerging applications. Full article

Nanotechnology has significantly advanced cancer therapy, particularly through the development of multifunctional nanoparticles (NPs) capable of acting as both therapeutic and diagnostic agents. This review focuses on the synergistic integration of radiotherapy (RT) and photothermal therapy (PTT) mediated by engineered NPs—a rapidly evolving strategy that enhances tumor specificity, minimizes healthy tissue damage, and enables real-time imaging. By analyzing the recent literature, we highlight the dual role of NPs in amplifying radiation-induced DNA damage and converting near-infrared (NIR) light into localized thermal energy. The review classifies various metal-based and composite nanomaterials (e.g., Au, Pt, Bi, Cu, and Fe) and evaluates their performance in preclinical RT–PTT settings. We also discuss the physicochemical properties, targeting strategies, and theragnostic applications that contribute to treatment efficiency. Unlike conventional combinatorial therapies, NP-mediated RT–PTT enables high spatial–temporal control, immunogenic potential, and integration with multimodal imaging. We conclude with the current challenges, translational barriers, and outlooks for clinical implementation. This work provides a comprehensive, up-to-date synthesis of NP-assisted RT–PTT as a powerful approach within the emerging field of nano-oncology. Full article

Sweet taste plays a pivotal role in human dietary behavior and metabolic regulation. With the increasing incidence of metabolic disorders linked to excessive sugar intake, the development and accurate evaluation of new sweeteners have become critical topics in food science and public health. However, the structural diversity of sweeteners and their complex interactions with sweet taste receptors present major challenges for standardized sweetness detection. This review offers a comprehensive and up-to-date overview of sweet taste transmission mechanisms and current detection methods. It outlines the classification and sensory characteristics of both conventional and emerging sweeteners, and explains the multi-level signaling pathway from receptor binding to neural encoding. Key detection techniques, including sensory evaluation, electronic tongues, and biosensors, are systematically compared in terms of their working principles, application scope, and limitations. Special emphasis is placed on advanced biosensing technologies utilizing receptor–ligand interactions and nanomaterials for highly sensitive and specific detection. Furthermore, an intelligent detection framework integrating molecular recognition, multi-source data fusion, and artificial intelligence is proposed. This interdisciplinary approach provides new insights and technical solutions to support precise sweetness evaluation and the future development of healthier food systems. Full article

Increasing global population and threat from climate change are imposing economic, social, and ecological challenges to global food production. The demand for food is increasing, necessitating enhanced agricultural production with minimal environmental impacts. To meet this demand, sustainable intensification of both crops and livestock is necessary. This is more urgent in sub-Saharan Africa (SSA), a region characterized by low productivity and environmentally degrading agriculture. Integrated Agriculture-livestock-forestry (ALF) systems could be a key form of intensification needed for achieving food security and economic and environmental sustainability. The synergetic interactions between ALF nexus provide a mechanism to foster interconnectedness and resource circulation where practices of one system influence the outcomes in another. These systems enhance long-term farm sustainability while serving the farmers’ environmental and economic goals. It provides opportunities for improving food security, farmer incomes, soil health, climate resilience and the achievement of several UN Sustainable Development Goals. It is therefore crucial to strengthen the evidence supporting the contribution of these systems. On this basis, this paper reviews the potential pathways through which ALF nexus can enhance incomes, food security and climate change mitigation in SSA. The paper discusses the pathways through which the integration of crops, livestock and trees enhance (i) food security, (ii) incomes, (iii) soil health and (iv) mitigation of climate change in SSA. We argue that implementing ALF systems will be accompanied by an advancement of enhanced food security, farmer livelihoods and ecological conservation. It will foster a more balanced and sustainable sub-Saharan African agricultural systems. Full article

Nickel-rich layered oxides such as LiNi_xMn_yCo_zO₂ (NMC), LiNi_xCo_yAl_zO₂ (NCA), and LiNi_xMn_yCo_zAl_{(1–x–y–z)}O₂ (NMCA), where x ≥ 0.6, have emerged as key cathode materials in lithium-ion batteries due to their high operating voltage and superior energy density. These materials, characterized by low cobalt content, offer a promising path toward sustainable and cost-effective energy storage solutions. However, their electrochemical performance remains below theoretical expectations, primarily due to challenges related to structural instability, limited thermal safety, and suboptimal cycle life. Intensive research efforts have been devoted to addressing these issues, resulting in substantial performance improvements and enabling the development of next-generation lithium-ion batteries with higher nickel content and reduced cobalt dependency. In this review, we present recent advances in material design and engineering strategies to overcome the problems limiting their electrochemical performance (cation mixing, phase stability, oxygen release, microcracks during cycling). These strategies include synthesis methods to optimize the morphology (size of the particles, core–shell and gradient structures), surface modifications of the Ni-rich particles, and doping. A detailed comparison between these strategies and the synergetic effects of their combination is presented. We also highlight the synergistic role of compatible lithium salts and electrolytes in achieving state-of-the-art nickel-rich lithium-ion batteries. Full article

The imbalance between urban and rural development has become a global structural problem that needs to be solved urgently. In this context, the tourism industry, with its strong correlation and cross-regional integration characteristics, provides a key practical entry point and mechanism for systematically promoting integrated development by stimulating factor flow, reconstructing the value chain, and reshaping local identity. Based on the synergetic theory, this paper constructs the theoretical framework of the synergetic evolution of the tourism industry and urban–rural integration, and analyzes the synergetic effect of the tourism industry and urban–rural integration in 58 prefecture-level cities in the Yellow River Basin from 2007 to 2021 and the dynamic characteristics of its spatio-temporal evolution by using the entropy TOPSIS, Haken model, and spatial Markov chain methods. The results show the following: ① As the order parameter of synergistic evolution, the tourism industry dominates the evolution direction of the whole system, mainly showing positive feedback effect, showing a significant stage characteristic in general, and gradually reducing the difference from the initial regional differentiation to the middle stage, finally reaching a higher level of unity. ② The synergic evolution of the tourism industry and urban–rural integration in the Yellow River Basin presents significant temporal and spatial differences in the upstream, midstream, and downstream, with the overall characteristics of “collaborative improvement in the upstream, significant agglomeration in the midstream, and reverse decoupling in the downstream”. ③ The dynamic evolution of the synergistic development of the tourism industry and urban–rural integration in the Yellow River Basin has significant characteristics of spatial interaction and dynamic transfer. Its level has the effect of “path dependence”, showing a good trend of upward transfer, and the spatial neighborhood has a significant impact on the synergetic level transfer. The development trend of each region shows that “the upstream region is upward and stable, the midstream region has significant agglomeration and diffusion effects, and the downstream region is driven by polar nuclei and spatial differentiation”. Full article

Accurate detection of surface defects such as wear, cracks, and flaws in metallic components is critical for equipment reliability and longevity, representing a core challenge in surface integrity engineering. To solve the information loss, low estimation accuracy and poor noise immunity associated with Multiscale Dispersion Entropy (MDE) are utilized to address the sensitivity to parameter selection and overfitting susceptibility of the Least Squares Twin Support Vector Machines (LSTSVM). A brand new fault diagnosis method which combined Time Shift Multiscale Ensemble Fuzzy Dispersion Entropy (TSMEFuDE) with binary tree LSTSVM (BT LSTSVM) was proposed. Firstly, a time shift method based on Higuchi Fractal Dimension was introduced to TSMEFuDE, resolving the continuity loss between coarse-grained levels. Second, four mapping techniques, linear, NCDF, tansig and logsig, are introduced. This synergetic combination of each advantage results in the improvement of entropy output stability. Furthermore, triangular and trapezoidal membership functions are incorporated into dispersion patterns and abolished in the round function, therefore enhancing the boundaries between the classes after signal mapping to discrete classes. Lastly, the proposed BT LSTSVM algorithm decomposes the multi-classification problem to a binary classification problem, which promotes the robustness of the algorithm. Simulation experiments maintain that TSMEFuDE has stronger adaptability, higher stability, and better noise resistance. In the fault diagnosis experiment, when compared to the Multiscale Fuzzy Dispersion Entropy (MFuDE) combined with the BT TSVM method, the TSMEFuDE combined with BT LSTSVM method improved the accuracy of bearing fault diagnosis by 5.65% and 2.82%. Full article

The Qieliekeqi siderite deposit, located in the Tashkurgan block of western Kunlun, is a carbonate-hosted iron deposit with hydrothermal sedimentary features. This study integrates whole-rock geochemistry, stable isotopes, and zircon U–Pb–Hf data to investigate its metallogenic evolution. Coarse-grained siderite samples, formed in deeper water, exhibit average Al₂O₃/TiO₂ ratios of 29.14, δEu of 2.69, and δCe of 0.83, indicating hydrothermal fluid dominance with limited seawater mixing. Banded samples from shallower settings show an average Al₂O₃/TiO₂ of 17.07, δEu of 3.18, and δCe of 0.94, suggesting stronger seawater interaction under oxidizing conditions. Both types are enriched in Mn, Co, and Ba, with low Ti and Al contents. Stable isotope results (δ¹³C_PDB = −6.0‰ to −4.6‰; δ¹⁸O_SMOW = 16.0‰ to 16.9‰) point to seawater-dominated fluids with minor magmatic and meteoric contributions, formed under open-system conditions at avg. temperatures of 53 to 58 °C. Zircon U–Pb dating yields an age of 211.01 ± 0.82 Ma, with an average εHf(t) of −3.94, indicating derivation from the partially melted ancient crust. These results support a two-stage model involving Late Cambrian hydrothermal sedimentation and Late Triassic magmatic overprinting. Full article

To overcome the negative effects of the biochemical application of nano-substances in medicine (toxicity problem), using the example of fullerene C₆₀’s first derivative (fullerenol, FD-C₆₀), we show that their biophysical effect is possible through non-covalent hydrogen bonds when around FD-C₆₀ water layers are formed. SD-C₆₀ (Zeta potential is −43.29 mV) is much more stable than fullerol (Zeta potential is −25.85 mV), so agglomeration/fragmentation of the fullerol structure, due to instability, can cause toxic effects. When fullerol in solution was exposed to an oscillatory magnetic field with Re (real) part [250/−92 mT, H(ωt) = Acos(ωt)], water layers around FD-C₆₀ (fullerenol) are formed according to the Penrose process of 3D tiling formation, and the second derivative, SD-C₆₀ (or 3HFWC), is self-organized. However, when Im (imaginary) part [250/−92 mT, H(ωt) = Bisin (ωt)] of the external magnetic field is applied in addition to SD-C₆₀, ordered water chains and bubbling of water (“micelle”) are formed as a third derivative (TD-C₆₀). Fullerol (FD-C₆₀) interacts with biological structures biochemically, while the second (SD-C₆₀) and third (TD-C₆₀) derivatives act biophysically via non-covalent hydrogen bond oscillation. SD-C₆₀ and TD-C₆₀ significantly increased water solubility and reduced toxicity. The paper explains the synthesis of SD-C60 and TD-C60 from FD-C60 (fullerol) as a precursor by the influence of an oscillatory magnetic field (“Yin-Yang” principle) on hydrogen bonds in order to create water layers around fullerol. Examples of biomedical applications (cancer and Alzheimer’s) of this synergetic complex are given. This study shows that the “Yin-Yang” machinery, based on the nanophysics of C₆₀ molecules and non-covalent hydrogen bonds, is possible. The first attempt has been composed to synthesize nanomaterial for biophysical vibrational nanomedicine. Full article

The utilization of electric vehicles (EVs) has grown significantly and continuously in recent years, encouraging the creation of new implementation opportunities. The battery electric vehicle (BEV) charging system can be effectively used during peak load periods, for voltage regulation, and for the improvement of power system stability within the smart grid. It provides an efficient bidirectional interface for charging the battery from the grid and discharging the battery into the grid. These two operation modes are referred to as grid-to-vehicle (G2V) and vehicle-to-grid (V2G), respectively. The management of power flow in both directions is highly complex and sensitive, which requires employing a robust control scheme. In this paper, an Integral Fast Terminal Synergetic Control Scheme (IFTSC) is designed to control the BEV charger system through accurately tracking the required current and voltage in both G2V and V2G system modes. Moreover, the Black-Winged Kite Algorithm is introduced to select the optimal gains of the proposed IFTS control scheme. The system stability is checked using the Lyapunov stability method. Comprehensive simulations using MATLAB/Simulink are conducted to assess the safety and efficacy of the suggested optimal IFTSC in comparison with IFTSC, optimal integral synergetic, and conventional PID controllers. Furthermore, processor-in-the-loop (PIL) co-simulation is carried out for the studied system using the C2000 launchxl-f28379d digital signal processing (DSP) board to confirm the practicability and effectiveness of the proposed OIFTS. The analysis of the obtained quantitative comparison proves that the proposed optimal IFTSC provides higher control performance under several critical testing scenarios. Full article

Fabricating efficient photocatalysts that can be used in solar-to-fuel conversion and to enhance the photochemical reaction rate is essential to the current energy crisis and climate changes due to the excessive usage of nonrenewable fossil fuels. To attain high photo-to-chemical conversion efficiency, it is important to fabricate cost-effective and durable catalysts with high activity. One-dimensional cadmium sulfides (1D CdS), with higher surface area, charge carrier separation along the linear direction, and visible light harvesting properties, are promising candidates for converting solar energy to H₂, reducing CO₂ to commodity chemicals, and remediating environmental pollutants. The main disadvantage of CdS is photocorrosion due to the leaching of S²⁻ ions during the photochemical reactions, and further charge recombination rate leads to low quantum efficiency. Therefore, the implementation of core–shell heterostructured morphology, i.e., the growth of the shell on the surface of the 1D CdS, which offers unique features such as protection of CdS from photocorrosion, a tunable interface between the core CdS and shell, and photogenerated charge carrier separation via heterojunctions, provides additional active sites and enhanced visible light harvesting. Therefore, the viability of the core–shell synthesis strategy and synergetic effects offer a new way of designing photocatalysts with enhanced stability and improved charge separation in solar energy conversion systems. This review highlights some critical aspects of synthesizing 1D CdS core–shell heterostructures, underlying reaction mechanisms, and their performance in photoredox reactions. Finally, some challenges and considerations in the fabrication of 1D CdS-based core–shell nanostructures that can overcome the current barriers in industrial applications are discussed. Full article