Search Results (64)

Under the accelerating global energy restructuring and the deepening carbon neutrality strategy, hydrogen energy has emerged with increasing strategic value as a zero-carbon secondary energy carrier. Water electrolysis technology based on renewable energy is regarded as an ideal pathway for large-scale green hydrogen production. However, polymer electrolyte membrane (PEM) conventional water electrolysis faces dual constraints in economic feasibility and scalability due to its high electrical energy consumption and reliance on noble metal catalysts. The mixed ionic-electronic conducting oxygen transport membrane (MIEC–OTM) reactor technology offers an innovative solution to this energy efficiency-cost paradox due to its thermo-electrochemical synergistic energy conversion mechanism and process integration. This not only overcomes the thermodynamic equilibrium limitations in traditional electrolysis but also reduces electrical energy demand by effectively coupling with medium- to high-temperature heat sources such as industrial waste heat and solar thermal energy. Therefore, this review, grounded in the physicochemical mechanisms of oxygen transport membrane reactors, systematically examines the influence of key factors, including membrane material design, catalytic interface optimization, and parameter synergy, on hydrogen production efficiency. Furthermore, it proposes a roadmap and breakthrough directions for industrial applications, focusing on enhancing intrinsic material stability, designing multi-field coupled reactors, and optimizing system energy efficiency. Full article

Microbial decomposition of persistent natural compounds such as phenolic lignin and polysaccharides in plant cell walls plays a crucial role in the global carbon cycle and underpins diverse biotechnological applications. Among microbial decomposers, fungi from the Ascomycota and Basidiomycota phyla have evolved specialized mechanisms for efficient lignocellulosic biomass degradation, employing extracellular enzymes and synergistic fungal consortia. Fungal coculture, defined as the controlled, axenic cultivation of multiple fungal species or strains in a single culture medium, is a promising strategy for industrial processes. This approach to biomass conversion offers potential for enhancing production of enzymes, biofuels, and other high-value bioproducts, while enabling investigation of ecological dynamics and metabolic pathways relevant to biorefinery operations. Lignocellulosic biomass conversion into fuels, energy, and biochemicals is central to the bioeconomy, integrating advanced biotechnology with sustainable resource use. Recent advancements in -omics technologies, including genomics, transcriptomics, and proteomics, have facilitated detailed analysis of fungal metabolism, uncovering novel secondary metabolites and enzymatic pathways activated under specific growth conditions. This review highlights the potential of fungal coculture systems to advance sustainable biomass conversion in alignment with circular bioeconomy goals. Full article

This study describes a monolithic silicalite-1 catalyst support designed for tritium oxidation reactions under humid conditions. Monolithic molecular sieves (sil-s) were fabricated by converting silica binders to silicalite-1 through secondary crystallization (175 °C, 24 h). In addition to the binder conversion to silicalite-1, some recrystallization of starting silicalite-1 (sil) results in higher crystallinity, lower concentration of silanol defects, and higher hydrophobicity. With the addition of 2% platinum, Pt/sil-s exhibited better stability under humid conditions, showing only 0.01%/min conversion decay over 800 min. This work has demonstrated a moisture-resistant Pt catalyst for tritium oxidation in fusion energy systems. Full article

Triboelectric nanogenerators have attracted extensive attention as they can complete sensing during energy conversion, triggering a series of self-powered designs. Traditional TENG bipolar independent fabrication technology requires secondary motion control, which limits its application scenarios. In this work, we propose a flag-type TENG prepared using in situ electrospinning technology, in which the connecting region is obtained by electrospinning deposition of PVDF on nylon as the receiving electrode. The active area is isolated with silicone oil paper. After electrospinning, the silicone oil paper was removed, and the distance between the nylon and PVDF is far beyond the van der Waals range. Thus, contact separation can be effectively carried out under the action of wind. The device has been proven to be able to be used for monitoring wind conditions at high-speed rail stations and enables completely self-powered monitoring of the wind level using self-powered LED coding. The device no longer relies on additional batteries or wires to work, providing additional ideas for future self-powered system design. Full article

The thermally driven ejector refrigeration system is generally used to recover industrial waste heat to improve the energy efficiency of industrial processes. However, for conventional single-stage ejector refrigeration systems (ERSs), the higher-pressure steam derived from high-temperature waste heat elevates the primary fluid pressure, resulting in significant pressure mismatch with the secondary fluid, which consequently leads to large irreversible losses and substantial degradation in system performance. To address this issue, a novel hybrid ejector refrigeration system (NHERS) is proposed and analyzed under design and off-design conditions using thermodynamics. The results indicate that under design conditions, compared to the conventional single-stage ejector refrigeration system, the proposed hybrid ejector refrigeration system can achieve increases of about 20.6% in the entrainment ratio, around 15.2% in the coefficient of performance (COP), and about 21.4% in exergetic efficiency. Analyzing its performance under off-design conditions to provide technical solutions for the flexible operation of the hybrid ejector refrigeration system proposed in this paper can broaden its application scenarios. Consequently, the proposed NHERS demonstrates remarkable superiority in energy conversion and transfer processes, showing certain application prospects in the field of medium- to high-temperature industrial waste heat recovery. Full article

Molecular solar thermal (MOST) energy systems can be utilized for the absorption, storage, and release of energy from the ultraviolet (UV) band of the solar spectrum. In this study, we designed a molecular solar thermal energy storage and release device based on the photoisomerization reaction of azobenzene. The device was integrated with a parabolic trough solar system, broadening the absorption range of the solar spectrum. By utilizing a coated secondary reflector, the system achieved efficient reflection of ultraviolet (UV) light in the 290–490 nm range, while solid-state azobenzene enabled the conversion of photon energy into chemical energy for storage and release. Experimental results under winter outdoor conditions demonstrated that: the secondary reflector significantly enhanced UV light concentration; the molecular solar thermal energy device exhibited remarkable thermal efficiency. Under an average solar irradiance of 302.23 W·m⁻², the device demonstrated excellent thermal performance, with the azobenzene reaching a peak temperature of 42.07 °C. The maximum heat release capacity was measured at 10.89 kJ·kg⁻¹·m⁻¹, while achieving a remarkable heat release power of 29.31 W·kg⁻¹·m⁻¹. Full article

This article proposes a bidirectional half-bridge resonant converter based on partial power regulation. The converter adopts an LLC converter as a DC-DC transformer (LLC-DCX) in the main power circuit and works in the open loop at the resonant frequency to give full play to the performance advantages of the LLC resonant converter. The partial power regulation circuit incorporates a synchronous Buck converter, enabling forward and backward power transmission by controlling the power flow direction. The converter achieves soft switching in both forward and backward directions, thereby reducing switching losses and enhancing conversion efficiency. Compared with the LLC-DCX converter, this converter can achieve wide voltage gain regulation while having high efficiency, which makes it suitable for charge–discharge applications between energy storage systems and DC Buses. In order to verify the performance of the proposed converter, a 1 kW prototype was constructed, maintaining a constant primary voltage of 400 V and a secondary voltage range of 350 V to 450 V. Experimental results indicate that the prototype achieves peak efficiencies of 97.74% in forward operation and 96.92% in backward operation, thoroughly demonstrating the feasibility and effectiveness of the proposed converter. Full article

The polar energy router is a key device in the polar clean energy system which converges the output of wind power, photovoltaic units, energy storage units and hydrogen fuel cells through the power electronic power converter to the DC bus, which requires the use of a variety of specifications of DC/DC converters; as a result, the efficiency of the DC/DC converter is directly connected to the efficiency of the polar energy router. This paper presents an enhanced isolated DC/DC converter with a phase-shifted full-bridge topology designed to meet the high-efficiency conversion requirements of polar energy routers. Although soft switching can be realized naturally in phase-shifted full-bridge topology, it also faces challenges, such as the difficulty of realizing soft switching under light load conditions, large circulation losses, a loss of duty cycle and oscillation in the secondary-side voltage. To solve these problems, an improved scheme of the phase-shifted full-bridge converter with an active clamp circuit is proposed in this paper. The scheme realized zero-voltage switch (ZVS) under light load by utilizing clamp capacitor energy. The on-state loss was reduced by zeroing the primary-side current during the circulating phase. This paper provides a detailed description of the topology, working principle and performance characteristics of the improved scheme, and its feasibility has been verified through experiments. Full article

Fully harnessing the inherent flexible adjustment potential of steel enterprises and fostering their interaction with the power grid is a crucial pathway to advancing green transformation. However, traditional research usually takes reducing energy consumption as the optimization goal, which limits the adjustment response capability, or ignores the storage and conversion constraints of secondary energy sources such as gas, steam, and electricity, making it difficult to fully explore and reasonably utilize the potential of multi-energy coordination. This study considers the production constraints of the surplus energy recovery and utilization system, establishes a collaborative scheduling model for a gas–steam–power system (GSPS) in an iron and steel enterprise, and proposes a demand response strategy that considers internal production constraints. Considering the time-of-use (TOU) tariff, iron and steel enterprises achieve a dynamic optimization adjustment range of electricity demand response through the conversion and storage process of gas, steam, and power. The adjustment capability of the GSPS reaches 26.94% of the initial electricity load, while reducing the total system energy cost by 2.24%. There is vast development potential of iron and steel enterprises participating in electricity demand response for promoting cost reduction and efficiency improvement, as well as enhancing the power grid flexibility. Full article

Background/Objectives: Circulating bile acid (BA) profiles change with lifestyle and are closely related to intestinal BA metabolisms such as deconjugation and conversion to secondary BAs. The composition of BA in the blood is involved in systemic nutrient metabolism and intestinal health. Herein, we explored the associations of lifestyle and physical fitness with the circulating BA profile of middle-aged men. Methods: Data of 147 male participants (aged 50–64 years; BMI < 26 kg/m²; no medication for diabetes or dyslipidemia) from the Japan Multi-Institutional Collaborative Cohort study were analyzed. Serum concentrations of 15 types of BAs were examined for associations with variables on dietary habits, physical-activity habits, and physical fitness. Results: Green tea intake was positively associated with the deconjugation ratio of total BAs (p = 0.028) and negatively associated with secondary BA levels (free deoxycholic acid [DCA] (p = 0.078), glyco-DCA (p = 0.048), and tauro-DCA (p = 0.037)). In contrast, physical activity was negatively associated with the deconjugation ratio (p = 0.029) and secondary BA levels (free DCA (p = 0.098), and free lithocholic acid (p = 0.009)). Grip strength was also negatively associated with secondary BA levels (tauro-DCA (p = 0.041)) but was not associated with the deconjugation ratio. Energy and fat intake and skeletal muscle mass were not associated with the deconjugation ratio or secondary BA levels. Conclusions: The study findings suggest that lifestyle-associated changes in serum deconjugated and secondary BAs indicate improvements in nutrient metabolism and the intestinal environment. Full article

The multi-degree-of-freedom characteristics of the planetary gear electronic continuously variable transmission (ECVT) configuration in series-parallel hybrid tractors impose more complex requirements for energy management strategies under variable load conditions. For a high-power hybrid tractor, this paper takes the hybrid tractor output-split (OS)-ECVT configuration as the research object and describes the principles of stepless transmission and power-splitting within the configuration. In order to improve the fuel economy of high-power hybrid tractors and the running status of power components, an energy management strategy focused on ploughing conditions based on the Bellman minimum dynamic programming (DP) algorithm is proposed in this paper. Second, equivalent fuel consumption is selected as the performance index for energy-saving control, and the solving principle of the energy management strategy based on the dynamic programming algorithm is established to facilitate the resolution process of the energy management strategy. Finally, the energy-saving control simulation is completed under ploughing conditions. The results show that compared with the energy management strategy based on the optimal operating line (OOL), the energy management strategy based on DP fully utilizes the benefits of low-cost electric energy and enables the hybrid power system to have a wider range of stepless transmission performance. In addition, the hybrid power system has the advantages of enhanced decoupling of speed and torque, higher efficiency, and more economical secondary energy conversion. As a result, the whole machine has enhanced power-split performance, greatly improving the running conditions of the power components. The equivalent fuel consumption values of the energy management strategies based on DP and OOL are about 3.1238 L and 4.2713 L, respectively. The equivalent fuel consumption based on DP is reduced by about 26.87%, which effectively improves the fuel efficiency of hybrid tractors. Full article

Biomass-to-biofuel conversion represents a critical component of the global transition to renewable energy. One of the most accessible types of biomass is sewage sludge (SS). This by-product from wastewater treatment plants (WWTPs) contains microplastics (MPs) originating from household, industrial and urban runoff sources. Due to their small size (<5 mm) and persistence, MPs present a challenge when they are removed from sewage systems, where they mainly accumulate (~90%). The presence of MPs in SS poses environmental risks when biosolids are applied as fertilizer in agriculture or incinerated for the purpose of energy production. The key problem is the efficient and reliable identification and reduction of MPs in sewage systems, due to the lack of standardized procedures. The reduction methods for MPs might involve physical, chemical, biological, and hydrothermal approaches, including hydrothermal carbonization (HTC). The HTC of SS produces hydrochar (HC), a solid biofuel, and presents a cutting-edge approach that simultaneously addresses secondary microplastic pollution and renewable biomass-derived energy production. In this article, we review briefly the MPs content in biosolids from different countries, and present HTC as a promising method for their removal from SS. In conclusion, HTC (i) effectively reduces the abundance of MPs in biosolids, (ii) produces an improved solid source of energy, and (iii) contributes to circular SS management. Full article

To protect the battery, radio energy transmission charging typically uses constant current (CC) charging before switching to constant voltage (CV) charging to enhance battery durability. This paper proposes adding an auxiliary clamp coil to the original circuit topology. The IPT battery charger designed with the auxiliary clamp coil can achieve both constant current (CC) and constant voltage (CV) outputs. The mutual inductance between the auxiliary clamp coil and the primary side coil greatly influences the output performance of the entire IPT system, so the auxiliary clamp coil should not be too large. To solve this problem, an S-S-PS circuit with secondary compensation topology in the secondary coil is proposed. This circuit topology reduces the size of the auxiliary clamp coil, allowing it to be placed in an optimal position. When the constant voltage output critical position is reached, the IPT system can still automatically, continuously, and smoothly switch between CC and CV modes. Consequently, this approach avoids increased cost consumption associated with detecting CC-CV switching thresholds, adding wireless transmission communication modules, real-time control of the power transmitter, and active protection of the circuit during constant current charging. Finally, a 48 V/2.5 A prototype was built to verify that the IPT system has CC-CV conversion functionality. Full article

The sustainable development of an area is highly reliant on a reliable electrical energy supply. Microgrids are important in integrating distributed energy resources (DERs) using power electronic converters. However, microgrid control becomes challenging with the increasing number of distributed generators and loads. With the conventional droop control method, power contributions from DER converters cannot be accurately shared due to a mismatch of line impedances. In this paper, an augmented hierarchical control mechanism is proposed to solve the issues mentioned above. This hierarchical control mechanism consists of primary and secondary controllers. The primary stage utilized the droop controller to improve optimal power flow, mainly for the resistive network. The secondary stage is based on an improved methodology to compensate for the voltage and frequency variations during small and large signal disturbances. Moreover, the modelling and analysis for PMSG-based wind energy conversion systems are also presented. The response of the primary controller for active and reactive power sharing is investigated. The analysis emphasizes the demonstration of optimal power-sharing under normal and abnormal conditions for the considered load. Finally, the suggested robust controller’s performance is evaluated in a MATLAB environment, and simulation results show the proposed scheme’s superiority under different operating conditions. The frequency is stable at 50 Hz after a 50 KW load is added. Full article

The µTAS/LOC, a highly integrated microsystem, consolidates multiple bioanalytical functions within a single chip, enhancing efficiency and precision in bioanalysis and biomedical operations. Microfluidic centrifugation, a key component of LOC devices, enables rapid capture and enrichment of tiny objects in samples, improving sensitivity and accuracy of detection and diagnosis. However, microfluidic systems face challenges due to viscosity dominance and difficulty in vortex formation. Acoustic-based centrifugation, particularly those using surface acoustic waves (SAWs), have shown promise in applications such as particle concentration, separation, and droplet mixing. However, challenges include accurate droplet placement, energy loss from off-axis positioning, and limited energy transfer from low-frequency SAW resonators, restricting centrifugal speed and sample volume. In this work, we introduce a novel ring array composed of eight Lamb wave resonators (LWRs), forming an Ultra-Fast Centrifuge Tunnel (UFCT) in a microfluidic system. The UFCT eliminates secondary vortices, concentrating energy in the main vortex and maximizing acoustic-to-streaming energy conversion. It enables ultra-fast centrifugation with a larger liquid capacity (50 μL), reduced power usage (50 mW) that is one order of magnitude smaller than existing devices, and greater linear speed (62 mm/s), surpassing the limitations of prior methods. We demonstrate successful high-fold enrichment of 2 μm and 10 μm particles and explore the UFCT’s potential in tissue engineering by encapsulating cells in a hydrogel-based micro-organ with a ring structure, which is of great significance for building more complex manipulation platforms for particles and cells in a bio-compatible and contactless manner. Full article