Search Results (743)

Heavy metal pollution from human activities is an increasing environmental concern. This study investigates the concentrations of Cu, Pb, Zn, Cd, Hg, and As in the coastal seawater offshore of Beihai, Guangxi, in April 2021, and explores their relationships with dissolved inorganic nitrogen, phosphate, and salinity. Our results reveal higher heavy metal concentrations in the northern nearshore waters and lower levels in southern offshore areas, with surface waters generally exhibiting greater enrichment than bottom waters. Surface concentrations show a decreasing trend from the northeast to the southwest, likely influenced by prevailing northeast monsoon winds. While bottom water concentrations decline from the northwest to the southeast, which indicates the influence of riverine runoff, particularly from the Qinzhou Bay estuary. Heavy metal levels in southern Beihai waters are comparable to those in the Beibu Gulf, except for Hg and Zn, which are significantly higher in the water of the Beibu Gulf. Notably, heavy metal concentrations in both Beihai and Beibu Gulf remain considerably lower than those observed in the coastal waters of Guangdong. Overall, Beihai’s coastal seawater meets China’s Class I quality standards. Nonetheless, continued monitoring is essential, especially of the potential ecological impacts of Hg and Zn on marine life. Full article

Interfacial solar evaporation has emerged as a promising strategy for freshwater production, where 3D evaporators offer distinct advantages in heat management and salt rejection. Freeze–thaw cycling is a widely adopted fabrication method for 3D hydrogel evaporators, yet the impact of preparation conditions (e.g., freezing temperature) on their evaporation performance remains poorly understood, hindering rational optimization of fabrication protocols. Herein, we report the fabrication of chitosan-based hydrogel evaporators via freeze–thaw cycles at different freezing temperatures (−20 °C, −40 °C, and −80 °C), leveraging its low cost and environmental friendliness. Characterizations of crosslinking density and microstructure reveal a direct correlation between freezing temperature and network porosity, which significantly influences evaporation rate, photothermal conversion efficiency, and anti-salt performance. It is noteworthy that the chitosan hydrogel prepared at −80 °C demonstrates an excellent evaporation rate in high-salinity environments and exhibits superior salt resistance during continuous evaporation testing. Long-term cyclic experiments indicate that there was an average evaporation rate of 3.76 kg m⁻² h⁻¹ over 10 cycles, with only a 2.5% decrease observed in the 10th cycle. This work not only elucidates the structure–property relationship of freeze–thaw fabricated hydrogels but also provides a strategic guideline for tailoring evaporator architectures to different salinity conditions, bridging the gap between material design and practical seawater desalination. Full article

This dataset presents environmental observations collected in August 2021 from 18 port and harbor sites located around Jeju Island, Korea. It includes physical, biogeochemical, and greenhouse gas (GHG) variables measured in surface seawater, such as temperature, salinity, dissolved oxygen, nutrients, chlorophyll-a, pH, total alkalinity, and dissolved inorganic carbon. Concentrations and air–sea fluxes of nitrous oxide (N₂O), methane (CH₄), and carbon dioxide (CO₂) were also quantified. All measurements were conducted following standardized analytical protocols, and certified reference materials and duplicate analyses were used to ensure data accuracy. Consequently, the dataset revealed that elevated nutrient accumulation in port and harbor waters and GHG concentrations tended to be higher at sites with stronger land-based influence. During August 2021, most sites functioned as sources of N₂O, CH₄, and CO₂ to the atmosphere. This integrated dataset offers valuable insights into the influence of anthropogenic and hydrological factors on coastal GHG dynamics and provides a foundation for future studies across diverse semi-enclosed marine systems. Full article

Leveraging the sensitivity of long-period fiber grating (LPFG) to changes in the environmental refractive index, an LPFG-based seawater concentration monitoring sensor is proposed. Considering the highly saltine and alkali characteristics of the sensor’s operating environment, the proposed sensor is packaged by basalt fiber-reinforced polymer (BFRP), and the sensor’s sensitivities were studied by sodium chloride and calcium chloride solution concentration experiments and one real-time sodium chloride solution concentration monitoring experiment. The test results show the wavelength of LPFG, a 3 dB bandwidth and a peak loss of LPFG’s spectrogram change with changes in the concentration of sodium chloride or calcium chloride solutions, but only the wavelength has a good linear relationship with the change in solution concentration, and the sensing coefficient is −0.160 nm/% in the sodium chloride solution and −0.225 nm/% in the calcium chloride solution. The real-time monitoring test further verified the sensor’s sensing performance, with an absolute measurement error of less than 1.8%. The BFRP packaged sensor has good corrosion resistance and a simple structure, and it has a certain application value in the monitoring of salinity in the marine environment and coastal soil. Full article

Vibrios are widespread in marine environments, and their persistence is often linked to natural reservoirs such as filter-feeding bivalves. This study investigated the capacity of the Mediterranean mussel, Mytilus galloprovincialis, to act as a reservoir of Vibrio harveyi using a GFP-tagged strain in controlled experiments. Mussels (shell length 4–6 cm) were exposed to V. harveyi gfp in estuarine and seawater at 12 °C and 20 °C over six days. Bacterial accumulation in gills, digestive gland, and gonads, as well as in feces and pseudofeces, was quantified, and the immune response following microbial challenge was assessed by histopathological analysis. Mussels actively removed V. harveyi from the water, but not completely. Vibrios were rapidly accumulated in organs, with the highest densities in the digestive gland (up to 10⁷–10⁸ CFU g⁻¹), and substantial bacterial loads detected in biodeposits (1.55–3.77 × 10⁷ CFU g⁻¹). Salinity had a greater effect than temperature on bacterial accumulation, with consistently higher counts in seawater assays. Concurrently with bacterial accumulation, mussels activated their immune system, as evidenced by the detection of granulocytomas and hemocytic infiltrations. Overall, these results demonstrate that M. galloprovincialis accumulates V. harveyi in tissues and biodeposits, serving as a natural reservoir for this bacterium. Full article

Non-conventional water sources (saline and brackish water) are viable options for crop cultivation. Current salt-tolerance research largely focuses on Na⁺ and Cl⁻, while other ions in these waters remain ill-understood. Synthetic seawater was a representative of saline and brackish water in a Design of Experiments (DoE) treatment design used to evaluate the effects of factors [synthetic seawater (0, 15, 30, or 45%, v/v, Instant Ocean^®), total inorganic nitrogen (0, 14, or 28 mM; 1 NH₄⁺:8 NO₃⁻ ratio), potassium (0, 9, or 21 mM), calcium (0, 2, or 5 mM), silicon (0, 0.03, or 0.09 mM) and zinc (0, 0.05, or 2 mM)] on seedlings for two varieties of Brassica juncea [‘Carolina Broadleaf’ (CB) and ‘Florida Broadleaf’ (FB)] using a hydroponic assay. In 30–45% synthetic seawater, 0.09 mM of silicon or 2 mM of calcium alleviated salt stress. In FB, 0.04–0.06 mM of silicon was optimal for the production of new leaves. The CB variety showed greater production of new leaves with 0.09 mM of silicon and 28 mM of potassium. Potassium and calcium are components of seawater, and a sodium chloride assay would not account for their interactions without a multivariate approach to evaluate salt tolerance. The seedling assay identified factors and established criteria for larger-scale harvest experiments. Full article

The coastal zone presents complex hydrodynamic interactions among inland groundwater, reservoir water, and intruding seawater, with important implications for ecosystem functioning and water quality. However, the relative roles of hydraulic connectivity and seawater-driven salinity gradients in shaping microbial communities at the aquifer–reservoir interface remain unclear. Here, we integrated hydrochemical analyses with high-throughput 16S rRNA gene sequencing to investigate bacterial community composition, assembly processes, and co-occurrence network patterns across groundwater_in (entering the reservoir), groundwater_out (exiting the reservoir), and reservoir water in a coastal system. Our findings reveal that seawater intrusion exerts a stronger influence on groundwater_out, leading to distinct chemical profiles and salinity-driven environmental filtering, whereas hydraulic connectivity promotes greater microbial similarity between groundwater_in and reservoir water. Groundwater samples exhibited higher alpha and beta diversity compared to the reservoir, with dominant taxa such as Comamonadaceae, Flavobacteriaceae, and Rhodobacteraceae serving as indicators of seawater intrusion. Community assembly analyses showed that homogeneous selection predominated, especially under strong salinity gradients, while dispersal limitation and spatial distance also contributed in areas of reduced connectivity. Key chemical factors, including TDS, Na⁺, Cl⁻, Mg²⁺, and K⁺, strongly shaped groundwater communities. Additionally, groundwater bacterial networks were more complex and robust than those in reservoir water, suggesting enhanced resilience to salinity stress. Collectively, this study demonstrates that salinity gradients can override the effects of hydraulic connectivity in structuring bacterial communities and their networks at coastal interfaces. Our findings provide novel microbial insights relevant for understanding biogeochemical processes and support the use of microbial indicators for more sensitive monitoring and management of coastal groundwater resources. Full article

This study investigates the salinization processes affecting the coastal aquifer within the Torre Guaceto State Nature Reserve, a Mediterranean coastal area characterized by a unique ecological value of a brackish wetland threatened by water-intensive agricultural activities. Groundwater salinization threatens biodiversity, agriculture, and water resource sustainability. This work integrates hydrogeological monitoring, geochemical and isotopic analyses, and geophysical surveys to understand salinity dynamics and identify key drivers, such as seawater intrusion, irrigation practices, and climate change. Data collected during monitoring campaigns from 2022 to 2024 reveal significant seasonal and spatial variations in groundwater salinity influenced by natural and human-induced factors. The results indicate that salt recycling from irrigation and marine spray deposition are important local contributors to groundwater salinity, in addition to seawater intrusion. These findings highlight the urgent need for integrated groundwater management approaches considering the combined effects of agricultural practices, irrigation water quality, and climate variability tailored to Mediterranean coastal ecosystems. Full article

This study addresses the microbial corrosion of cement-based materials in coastal urban sewer networks, systematically investigating the kinetic mechanisms of sulfur biogeochemical cycling under seawater infiltration conditions. Through dynamic monitoring of sulfide concentrations and environmental parameter variations in anaerobic pipelines, a multiphase coupled kinetic model integrating liquid-phase, gas-phase, and biofilm metabolic processes was developed. The results demonstrate that moderate salinity enhances the activity of sulfate-reducing bacteria (SRB) and accelerates sulfate reduction rates, whereas excessive sulfide accumulation inhibits SRB activity. At 35 °C, the mathematical model coefficient “a” for sulfate reduction in the reactor with 3 g/L salinity was significantly higher than those in reactors with 19 g/L and 35 g/L salinities, with no significant difference observed between the latter two. Overall, high sulfate concentrations do not act as limiting factors for sulfide oxidation under anaerobic conditions; instead, they enhance the reaction within specific concentration ranges. The refined kinetic model enables prediction of sulfur speciation in tropical coastal urban sewer pipelines, providing a scientific basis for corrosion risk assessment. Full article

The increasing demand for sustainable energy and clean water has prompted the exploration of alternative solutions to reduce reliance on fossil fuels. In this context, hydrogen production through water electrolysis powered by solar energy presents a promising pathway toward a zero-carbon footprint. This study investigates the potential of copper slag, an abundant industrial waste, as a low-cost electrocatalyst for the hydrogen evolution reaction (HER) in contact with saline water such as 0.5 M NaCl and seawater, comparing the electrochemical response when in contact with geothermal water from El Tatio (Atacama Desert). The physicochemical characterisation of copper slag was performed using XRD, Raman, and SEM-EDS to determine its surface properties. Electrochemical evaluations were conducted in 0.5 M NaCl and natural seawater using polarisation techniques to assess the corrosion behaviour and catalytic efficiency of the copper slag electrodes. The results indicate that copper slag exhibits high stability and promising HER kinetics, particularly in seawater, where its mesoporous structure facilitates efficient charge transfer processes. The key novelty of this manuscript lies in the direct revalorisation of untreated copper slag as a functional electrode for HER in real seawater and geothermal water, avoiding the use of expensive noble metals and aligning with circular economy principles. This innovative combination of recycled material and natural saline electrolyte enhances both the technical and economic viability of electrolysis, while reducing environmental impact and promoting green hydrogen production in coastal regions with high solar potential. This research contributes to the value of industrial waste, offering a viable pathway for advancing sustainable hydrogen technologies in real-world environments. Full article

Microbially induced calcium carbonate precipitation (MICP) has emerged as a research focus in concrete crack remediation due to its environmental compatibility and efficient mineralization capacity. The hypersaline conditions of seawater (average 35 g/L NaCl) and alkaline environments (pH 12) within concrete cracks pose significant challenges to the survival of mineralization-capable microorganisms. To enhance microbial tolerance under these extreme conditions, this study employed a laboratory adaptive evolution strategy to successfully develop a Sporosarcina pasteurii strain demonstrating tolerance to 35 g/L NaCl and pH 12. Comparative analysis of growth characteristics (OD₆₀₀), pH variation, urease activity, and specific urease activity revealed that the evolved strain maintained growth kinetics under harsh conditions comparable to the parental strain under normal conditions. Subsequent evaluations demonstrated the evolved strain’s superior salt–alkali tolerance through enhanced enzymatic activity, precipitation yield, particle size distribution, crystal morphology, and microstructure characterization under various saline–alkaline conditions. Whole-genome sequencing identified five non-synonymous mutated genes associated with ribosomal stability, transmembrane transport, and osmoprotectant synthesis. Transcriptomic profiling revealed 1082 deferentially expressed genes (543 upregulated, 539 downregulated), predominantly involved in ribosomal biogenesis, porphyrin metabolism, oxidative phosphorylation, tricarboxylic acid (TCA) cycle, and amino acid metabolism. In concrete remediation experiments, the evolved strain achieved superior performance with 89.3% compressive strength recovery and 48% reduction in water absorption rate. This study elucidates the molecular mechanisms underlying S. pasteurii’s salt–alkali tolerance and validates its potential application in the remediation of marine engineering. Full article

This study systematically unravels the hydrochemical evolution mechanisms and driving forces in multi-aquifer systems of Qingdao, a coastal economic hub. Integrated hydrochemical analysis of porous, fissured, and karst water, combined with PHREEQC modeling and Positive Matrix Factorization (PMF), deciphers water–rock interactions and anthropogenic perturbations. Groundwater exhibits weak alkalinity (pH 7.2–8.4), with porous aquifers showing markedly higher TDS (161.1–8203.5 mg/L) than fissured (147.7–1224.8 mg/L) and karst systems (361.1–4551.5 mg/L). Spatial heterogeneity reveals progressive hydrochemical transitions (HCO₃-Ca → SO₄-Ca·Mg → Cl-Na) in porous aquifers across the Dagu River Basin. While carbonate (calcite) and silicate weathering govern natural hydrochemistry, evaporite dissolution and seawater intrusion drive severe groundwater salinization in the western Pingdu City and the Dagu River Estuary (localized TDS up to 8203.5 mg/L). PMF source apportionment identifies acid deposition-enhanced dissolution of carbonate/silicate minerals, with nitrate contamination predominantly sourced from agricultural runoff and domestic sewage. Landfill leachate exerts pronounced impacts in Laixi and adjacent regions. This study offering actionable strategies for salinity mitigation and contaminant source regulation, thereby providing a scientific framework for sustainable groundwater management in rapidly urbanizing coastal zones. Full article

A vital step for any hydrochemical assessment is properly carrying out quality assurance and quality control (QA/QC) techniques to evaluate data confidence before performing the assessment. Understanding the processes governing groundwater evolution in coastal aquifers is critical for managing freshwater resources under increasing anthropogenic and climatic pressures. This study reassesses the hydrochemical and isotopic data from the Deep Confined Aquifer System (DCAS) in the Jiangsu Coastal Plain, China, by firstly applying QA/QC protocols. Anomalously high Fe and Mn concentrations in several samples were identified and excluded, yielding a refined dataset that enabled a more accurate interpretation of hydrogeochemical processes. Using hierarchical cluster analysis (HCA), principal component analysis (PCA), and stable and radioactive isotope data (δ²H, δ¹⁸O, ³H, and ¹⁴C), we identify three dominant drivers of groundwater evolution: water–rock interaction, evaporation, and seawater intrusion. In contrast to earlier interpretations, we present clear evidence of active seawater intrusion into the DCAS, supported by salinity patterns, isotopic signatures, and local hydrodynamics. Furthermore, inconsistencies between tritium- and radiocarbon-derived residence times—modern recharge indicated by ³H versus Pleistocene ages from ¹⁴C—highlight the unreliability of previous paleoclimatic reconstructions based on unvalidated datasets. These findings underscore the crucial role of robust QA/QC and integrated tracer analysis in groundwater studies. Full article

Human development has led to increased production of oil and gas, mainly as energy sources, which, however, are responsible for contamination and metal corrosion in industrial, marine, and terrestrial environments. Lubricating oil, in particular, is widely used in generators and industrial machines in the electric sector and is responsible for contamination not only in industrial environments but also in many terrestrial and aquatic ecosystems. In this context, this study aimed to apply the Starmerella bombicola ATCC 222214 biosurfactant to inhibit metal corrosion in seawater and in an Accelerated Corrosion Chamber (ACC). For this purpose, its toxicity against the microcrustacean Artemia salina, its dispersion capacity, and its ability to promote oil biodegradation in a saline environment were investigated. The biosurfactant, when applied at twice its Critical Micellar Concentration (CMC), caused low mortality (30.0%) of microcrustaceans in a saline environment, and, in its crude form, the biosurfactant ensured the dispersion of no less than 77.56% of residual engine oil in seawater. Oil biodegradation by autochthonous microorganisms reached 94.39% in the presence of the biosurfactant in seawater. Furthermore, the biosurfactant, when used at twice its CMC, acted satisfactorily as a corrosion inhibitor by reducing the mass loss of galvanized iron specimens (plates) in seawater in a static system to only 0.36%. On the other hand, when the biosurfactant was added at the CMC as an atmospheric corrosion inhibitor, the reduction in mass loss of carbon steel plates treated in the ACC was 17.38% compared to the control containing only a biodegradable matrix based on vegetable resin. When the biosurfactant was incorporated into different paints applied to galvanized iron plates placed in contact with the salt spray produced in the ACC, the best result was obtained using the biomolecule at a concentration of 3% in the satin paint, ensuring a plate mass loss (29.236 g/m²) that was almost half that obtained without surfactant (52.967 g/m²). The study indicated the use of yeast biosurfactant as a sustainable alternative in combating the contamination of marine environments and metal corrosion, with the aim of preserving the environment and improving the quality of life in aquatic and terrestrial ecosystems. Full article

The recirculating aquaculture system (RAS) has been rapidly adopted worldwide in recent years due to its high productivity, good stability, and good environmental controllability (and therefore friendliness to environment and ecology). Nevertheless, the effluent from seawater RAS contains a high level of ammonia nitrogen which is toxic to fish, so it is necessary to overcome the salinity conditions to achieve rapid and efficient nitrification for recycling. The moving bed biofilm reactor (MBBR) has been widely applied often by using PE fillers for efficient wastewater treatment. However, the start-up of MBBR in seawater environments has remained a challenge due to salinity stress and harsh inoculation conditions. This study investigated a new PE-filler surface modification method towards the enhanced start-up of mariculture MBBR by combining liquid-phase oxidation and maifanstone powder. The aim was to obtain a higher porous surface and roughness and a strong adsorption and alkalinity adjustment for the MBBR PE filler. The hydrophilic properties, surface morphology, and chemical structure of a raw polyethylene filler (an unmodified PE filler), liquid-phase oxidation modified filler (LO-PE), and liquid-phase oxidation combined with a coating of a maifanstone-powder-surface-modified filler (LO-SCPE) were first investigated and compared. The results showed that the contact angle was reduced to 45.5° after the optimal liquid-phase oxidation modification for LO-PE, 49.8% lower than that before modification, while SEM showed increased roughness and surface area by modification. Moreover, EDS presented the relative content of carbon (22.75%) and oxygen (42.36%) on the LO-SCPE surface with an O/C ratio of 186.10%, which is 177.7% higher than that of the unmodified filler. The start-up experiment on MBBRs treating simulated marine RAS wastewater (HRT = 24 h) showed that the start-up period was shortened by 10 days for LO-SCPE compared to the PE reactor, with better ammonia nitrogen removal observed for LO-SCPE (95.8%) than the PE reactor (91.7%). Meanwhile, the bacterial community composition showed that the LO-SCPE reactor had a more diverse and abundant AOB and NOB. The Nitrospira has a more significant impact on nitrification because it would directly oxidize NH₄⁺-N to NO₃⁻-N (comammox pathway) as mediated by AOB and NOB. Further, the LO-SCPE reactor showed a higher NH₄⁺-N removal rate (>99%), less NO₂⁻-N accumulation, and a shorter adaption period than the PE reactor. Eventually, the NH₄⁺-N concentrations of the three reactors (R1, R2, and R3) reached <0.1 mg/L within 3 days, and their NH₄⁺-N removal efficiencies achieved 99.53%, 99.61%, and 99.69%, respectively, under ammonia shock load. Hence, the LO-SCPE media have a higher marine wastewater treatment efficiency. Full article