Search Results (1,128)

Adam Smith’s The Theory of Moral Sentiments (1759) and The Wealth of Nations (1776) offer a distinctive perspective on moral development that avoids succumbing to the limitations of capitalism and utilitarianism by supporting both moral agency and the importance of enabling structures and systems in commerce. Corruption of moral sentiments cannot be averted by enforcing only mechanical structures and systems of compliance with governance rules, regulations, and disciplinary processes to control employees. Compliance then follows a means-to-an-end logic for maximising profit, which becomes a barrier for autonomous moral development or is even incapable of moral decision-making, as suggested by Hannah Arendt. Smith’s originality lies in grounding this analysis with an affirmative view of human nature and liberty, which enables him to move beyond purely legalistic or moralistic approaches to understand and counter moral failure. Smith offers a distinctive perspective on moral development in commerce, integrating human cognition, moral philosophy, and enabling structural and systemic design that avoids the displacement of responsibility noted by Albert Bandura. For Smith, the corruption of moral sentiments is distorted by the natural need for praise from others at all costs, as opposed to praiseworthy conduct. His remedy is a two-fold process of moral education in which the impartial spectator extends the natural desire for praise to prioritise honour and integrity in behaviour that is praiseworthy. However, moral education also requires a structural social space that is not prescriptive or legalistic to enhance the freedom to develop morally by exercising the choice to strive towards ethical behaviour. In this manner, self-interest enables moral development through natural means that prioritise honourable conduct and perpetuates sympathetic sentiment in which the well-being of others is considered. Full article

The Electro-Fenton (EF) process is a promising technology for the sustainable remediation of organic contaminants in complex wastewater. In this study, a weak magnetic field (~150 G) was applied to enhance the performance of an EF system using magnetite (Fe₃O₄) synthesized by a controlled co-precipitation route as a recyclable solid iron source. The magnetite was characterized by FTIR, SEM/EDS, and XPS, confirming the coexistence of Fe²⁺/Fe³⁺ species essential for in situ Fenton-like reactions. Under the selected operating conditions (90 min reaction time), magnetic-field assistance improved methylene blue decolorization from 14.2% to 46.0% at pH 3. FeSO₄ was used only as a homogeneous benchmark, whereas the magnetite-based system operated without soluble iron addition, minimizing sludge formation and secondary contamination. These results demonstrate the potential of magnetite-assisted and magnetically enhanced EF systems as a low-cost, sustainable alternative for the treatment of dye-containing industrial wastewater and other complex effluents. Full article

Fungi have emerged as versatile biotechnological platforms for addressing environmental challenges with potential co-benefits for human health. Among them, Pleurotus ostreatus stands out for its ligninolytic enzyme systems (notably laccases), capacity to valorize lignocellulosic residues, and ability to form functional mycelial materials. We conducted an evidence-mapped review, based on a bibliometric analysis of the Scopus corpus (2001–2025; 2085 records), to characterize research fronts and practical opportunities in environmental remediation and sustainable bioprocesses involving P. ostreatus. The mapped literature shows sustained growth and global engagement, with prominent themes in: (a) oxidative transformation of phenolic compounds, dyes and polycyclic aromatic hydrocarbons; (b) biodegradation/bioconversion of agro-industrial residues into value-added products; and (c) development of bio-based materials and processes aligned with the circular bioeconomy. We synthesize how these strands translate to real-world contexts, reducing contaminant loads, closing nutrient loops, and enabling low-cost processes that may indirectly reduce exposure-related risks. Key translational gaps persist: standardization of environmental endpoints, scale-up from laboratory to field, performance in complex matrices, life-cycle impacts and cost, ecotoxicological safety, and long-term monitoring. A practical agenda was proposed that prioritizes field-scale demonstrations with harmonized protocols, integration of life-cycle assessment and cost metrics, data sharing, and One Health frameworks linking environmental gains with plausible health co-benefits. In conclusion, P. ostreatus is a tractable platform organism for sustainable remediation and bio-manufacturing. This evidence map clarifies where the field is mature and where focused effort can accelerate the impact of future research. Full article

The escalating release of synthetic dyes from textile and allied industries has become a pressing global environmental issue due to their toxicity, persistence, and resistance to biodegradation. Among the various treatment strategies, adsorption has emerged as one of the most efficient, economical, and sustainable techniques for dye removal from aqueous environments. This review highlights recent advances in bio-derived adsorbents—particularly raw biomass powders, biochars, and activated carbons—developed from renewable waste sources such as agricultural residues, fruit peels, shells, and plant fibers. It systematically discusses adsorption mechanisms, the influence of process parameters, kinetic and thermodynamic models, and regeneration performance. Furthermore, the review emphasizes the superior adsorption efficiency and cost-effectiveness of biomass-derived carbons compared to conventional adsorbents. The integration of surface modification, magnetization, and nanocomposite formation has further enhanced dye uptake and reusability. Overall, this study underscores the potential of biomass-derived materials as sustainable alternatives for wastewater treatment and environmental remediation. Full article

The escalating global water crisis demands the development of cost-effective and environmentally sustainable treatment technologies. Among various advanced oxidation processes (AOPs), peracetic acid (PAA) has emerged as a promising oxidant, owing to its high redox potential, chemical stability, and potent disinfection capability. Nevertheless, the lack of highly efficient catalysts remains a major obstacle to achieving the effective degradation of contaminants of emerging concern in wastewater. Heterogeneous catalysis has proven to be a viable strategy for enhancing PAA activation, highlighting the urgent need for catalysts with superior activity, stability, and recyclability. Metal–organic frameworks (MOFs), with their large surface areas, tunable porosity, and structural diversity, provide versatile platforms for catalyst design. Recently, MOF-derived materials have attracted increasing attention for PAA activation, offering a new frontier in advanced oxidation technologies for efficient and sustainable wastewater remediation. This review systematically examines the role of MOFs in PAA activation, from pristine frameworks to MOF-based composites and MOF-derived catalysts. Mechanistic insights into PAA activation are highlighted, strategies for engineering MOF-based composites with synergistic catalytic properties are discussed, and the transformation of MOFs into robust derivatives with improved stability and reactivity is explored. Special attention is given to the identification and quantification of reactive species generated in PAA systems, providing a critical understanding of reaction pathways and catalytic performance. Finally, current challenges and future directions are outlined for designing highly efficient, recyclable, and environmentally compatible MOF-based catalysts, emphasizing their potential to significantly advance PAA-based AOPs. Full article

Crude oil contamination occurs frequently in soil; thus, on-site measurement of oil content is critical for controlling petroleum contamination, but it is challenging. Conventional chemical analysis requires complicated sample pretreatment and high-cost facilities, requiring on-site and cost-effective approaches. This study innovated a whole-cell bioreporter assay by combining Acinetobacter-hosted n-alkane and genotoxicity bioreporters to directly and simultaneously evaluate the contamination level and genotoxicities of crude oil in contaminated soils. Ultrasound pretreatment was employed to accelerate the measurement process, and the first-order release kinetic model was used to calculate crude oil content in an easy operation. The detection limit of the bioreporters was satisfactory at 0.1 mg/L, and the quantification range was 0.1–10 mg/L. The developed bioreporter assay effectively assessed the bioavailability and toxicity of crude oil in real contaminated soils and recognized distinct toxicities after soil weathering. Our findings highlight the feasibility of using the whole-cell bioreporter assay to evaluate the bioavailability and toxicity of crude oil, offering supporting data for the selection of remediation strategies. Full article

This work investigated the effects of gamma irradiation on the adsorption capacities of rice husk (RH) for the removal of Cu²⁺, Cr³⁺, and Zn²⁺ ions from aqueous solutions, with potential applications in wastewater remediation. RH samples were gamma-irradiated at doses up to 40 kGy and characterized using SEM-EDS, XRF, FTIR, XRD, and BET analyses. While morphological and textural changes remained subtle, FTIR and SEM-EDS confirmed the formation and intensification of oxygen-containing functional groups, including –OH, –COOH, and C=O, as well as increased exposure of silica (Si–O) on the surfaces, which substantially enhanced surface reactivity of RH toward metal ions. Batch adsorption experiments revealed that 40-kGy irradiated RH samples (RH-40) exhibited the highest removal efficiencies compared to non-irradiated and lower-dose samples (RH-0, RH-10, RH-20, and RH-30), specifically with improvements of 415% for Cu²⁺, 502% for Cr³⁺, and 663% for Zn²⁺ compared to RH-0, determined at the initial concentration of 10 mg/L. Kinetic studies also showed rapid adsorption within the first 10–15 min, dominated initially by boundary-layer diffusion, followed by chemisorption-driven equilibrium behavior. The pseudo-second-order (PSO) model provided an excellent fit for all metals (R² = 0.999), indicating maximum model-predicted kinetic capacities of 555.56 mg/g (Cu²⁺), 769.23 mg/g (Cr³⁺), and 434.78 mg/g (Zn²⁺). Langmuir isotherms also fitted well (R² = 0.941–0.995), with predicted monolayer capacities of 535.33 mg/g (Cu²⁺), 491.64 mg/g (Cr³⁺), and 318.88 mg/g (Zn²⁺). Freundlich modeling further indicated favorable heterogeneous adsorption, with K_F values of 42.614 (Zn²⁺), 20.443 (Cr³⁺), and 16.524 (Cu²⁺) and heterogeneity factors (n) greater than 1 for all metals. These overall results suggested that gamma irradiation substantially enhanced RH functionality that enabled fast and high-capacity heavy-metal adsorption through surface oxidation and carbon valorization. Gamma-irradiated RH, therefore, represented a promising, low-cost, and environmentally friendly biosorbent for wastewater treatment applications. Full article

Environmental pollution caused by industrialization and population growth has intensified the demand for sustainable materials capable of mitigating contaminants effectively. In this context, the green synthesis of carbon-based nanomaterials derived from biomass has gained significant attention as an eco-friendly and renewable approach that reduces dependence on fossil resources. These nanomaterials exhibit outstanding physicochemical characteristics, including high surface area, tunable porosity, abundant functional groups, and excellent stability, which enhance their performance in environmental remediation. Specifically, biomass-derived carbon nanomaterials have demonstrated remarkable efficiency as adsorbents for the removal of heavy metals and organic pollutants, as well as photocatalysts for the degradation of toxic compounds under visible light irradiation. The physicochemical properties of the resulting materials are strongly influenced by the type and pretreatment of the biomass, along with synthesis parameters such as pyrolysis temperature, activation process, and heteroatom doping. This review highlights recent advances in the synthesis, characterization, and environmental applications of biomass-derived carbon nanomaterials, emphasizing their potential as cost-effective, scalable, and sustainable solutions for wastewater treatment and pollutant degradation in both aquatic and atmospheric systems. Full article

This study presents a green synthesis of zinc oxide (ZnO) nanoparticles (NPs) capped with Haloxylon (P1) and Calligonum (P2) extracts. The use of plant-derived biomolecules as natural capping agents offers an environmentally friendly strategy to tune surface chemistry and to enhance the photocatalytic behavior of ZnO NPs. ZnO/plant extracts nanocomposites were prepared via a hydrothermal route and systematically characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), UV–Vis spectroscopy, and photoluminescence (PL), followed by evaluation of their photocatalytic performance against methylene blue (MB) under UV irradiation. XRD confirmed a wurtzite structure with crystallite sizes ranging from 8.95 to 10.93 nm, while PL spectra indicated an improved charge carrier separation in extract-capped ZnO. The characteristics and pollutant removal performance of the greenly synthesized ZnO composites were compared with those of a chemically synthesized ZnO nanoparticles reference sample. Adsorption tests under dark conditions revealed a strong difference between the materials: ZnO-P1 removed 48% of MB, whereas ZnO-P2 adsorbed only 7%, demonstrating a much higher affinity of the Haloxylon-derived surface groups toward MB. In comparison, the chemically synthesized ZnO exhibited an adsorption capacity of 54%, confirming that the Haloxylon-mediated surface provides a comparable efficient dye uptake prior to irradiation. After UV irradiation, all samples exhibited a photocatalytic activity with a total MB removal reached ~59% for the reference ZnO sample and ~53% for ZnO-P1 compared to about 13% for the ZnO-P2. Kinetic analysis also confirmed that ZnO-P1 possessed a high degradation rate constant, indicating a better intrinsic photocatalytic efficiency in addition to the strong adsorption contribution. The enhanced performance of plant-capped ZnO is attributed to phytochemical-induced surface defects, which facilitated charge separation and boosted the generation of reactive oxygen species (ROS). Overall, these results demonstrate that Haloxylon and Calligonum extracts are effective and sustainable capping agents, providing a low-cost, eco-friendly approach for designing ZnO nanocatalysts composites with promising applications in wastewater treatment and environmental remediation. Full article

Pecan (Carya illinoinensis) cultivation generates a substantial number of byproducts, particularly nutshells, which are often discarded despite being rich in bioactive and structural compounds. These agro-industrial residues, comprising nearly 50% of the total nut mass, contain high levels of phenolics, flavonoids, dietary fiber, and lignocellulosic matter, making them suitable for circular economy applications. This review critically evaluates the potential of pecan shell waste for value-added applications in environmental remediation, food and pharmaceutical formulations, and green materials production. It explores innovative green extraction techniques, such as ultrasound-assisted, microwave-assisted, and subcritical water extraction, to recover valuable compounds like ellagic acid and tannins with high efficiency and minimal environmental impact. Moreover, the review highlights the conversion of pecan shells into activated carbon for wastewater treatment and soil remediation. Pecan byproducts have been used as sustainable feedstocks for catalyst support, contributing to energy conversion and biomass catalysis. The bioactive compounds also offer therapeutic properties, including antioxidant, anti-inflammatory, and antimicrobial effects, supporting their inclusion in nutraceutical and cosmetic applications. Through a comprehensive synthesis of recent studies, this work highlights the role of pecan shell valorization in reducing waste, improving public health, and increasing economic resilience within agro-industrial systems. By aligning with sustainable development and circular economies, the utilization of pecan byproducts provides a low-cost, eco-innovative pathway to mitigate environmental pollution and promote sustainable development. Full article

Pharmaceutical contamination poses growing environmental risks, yet industrial adoption of advanced oxidation processes (AOPs) remains limited by high costs and the environmental impacts associated with specialized electrodes. This study demonstrates that unmodified aluminum electrodes achieve pharmaceutical degradation performance comparable to precious metal systems at dramatically reduced cost and carbon footprint. An aluminum-based electro-Fenton (EF) system was optimized for amlodipine (AML) removal through systematic evaluation of operational parameters. Under optimized conditions (pH 2.7, 35 mg L⁻¹ FeCl₃, 1.3 mM NaCl, 5 V), the system achieved 97% AML degradation within 15 min, following pseudo-first-order kinetics ($k=0.15$ min⁻¹). The mechanism combines hydroxyl radical oxidation with synergistic electrocoagulation resulting from anodic Al³⁺ release and cathodic Fe²⁺ regeneration. Sustainability assessment revealed exceptional performance: an energy consumption of 0.32 kWh m⁻³, a carbon footprint of 0.53 kg CO₂-eq m⁻³ (60–75% lower than conventional AOPs), and operational costs of $0.71–1.05 m⁻³. Aluminum electrodes cost 100× less than platinum alternatives, with the generated Al(OH)₃ sludge offering valorization potential. This work demonstrates that high-performance electrochemical remediation is achievable using Earth-abundant materials, providing a scalable and cost-effective alternative for pharmaceutical wastewater treatment in resource-constrained settings. Full article

A geopolymer, derived from agricultural waste, was used as an efficient, sustainable, and low-cost adsorbent of methylene blue, a recurrent industrial dye contaminant. The geopolymer was synthesized via a standard alkali activation process using wheat husk ash calcinated at 1050 °C. Adsorption capabilities were evaluated through batch kinetic experiments. The removal efficiency was determined by ultraviolet–visible spectrophotometry, and the adsorption kinetics were fitted to various models. The geopolymer demonstrated a maximum adsorption capacity of 270.58 mg/g for methylene blue, achieving a removal efficiency of 85.20% under optimal conditions. Kinetic analysis confirmed that the adsorption process is best described by the pseudo-second-order model. This suggests that chemisorption, which involves chemical bonding or electron exchange between the dye and the negatively charged aluminosilicate structure of the geopolymer, is the rate-limiting mechanism. This demonstrates that geopolymers are effective and promising adsorbents, valorizing an agricultural waste stream into a functional material for the efficient treatment of dye-polluted wastewater. The competitive capacity and favorable chemisorption mechanism position the geopolymer as a promising material for the remediation of dye-contaminated industrial effluents. Full article

Polyurethane (PU) is widely recognized for its efficient oil sorption properties. However, this capacity is highly dependent on its intrinsic chemical composition and morphological structure, which can be altered by mechanical or chemical treatments commonly applied before using it as a sorbent. In this study, we present a comprehensive investigation of the oil sorption behavior of both soft and rigid PU foams, and their blade-milled ground (BMG) counterparts obtained by mechanical treatment of several recycled PU-based products, including seats, mattresses, side panels of cars, packaging components, and insulating panels of refrigerators and freezers. We found that blade milling the soft PU foams leads to a significant reduction in oil sorption capacity proportional to the extent of grinding. Pristine soft PU foams and BMG-PUs with intermediate particle size (−250 μm–1 mm) exhibited the highest oil uptake (20–30 g/g), whereas the finest fraction (5 μm–250 μm) showed a lower capacity (3–7 g/g). In contrast, rigid PU foams showed consistently low oil sorption (~5 g/g), with negligible differences between the original and ground materials. At the macroscopic level, optical and morphological analyses revealed the collapse of the 3D porous network and a reduction in surface area. On the microscopic scale, spectroscopic, structural, and thermal analyses confirmed phase separation and rearrangement of hard and soft segmented domains within the polymer matrix, suggesting a different mechanism for oil sorption in BMG-PU. Despite reduced performance compared to pristine foams, BMG-PU powders, especially those with intermediate dimensions and originating from soft PU foams, present a viable, low-cost, and sustainable alternative for oil sorption applications, including oil spill remediation, while offering an effective strategy for effective recycling of PU foam wastes. Full article

The valorization of agricultural residues helps improve crop economic efficiency and alleviate environmental pressures. Owing to the merits of simplicity, high efficiency, low costs, and scalability, adsorption removal of contaminants using biochar has been widely investigated. The adsorption removal of organic and inorganic contaminants from wastewater using biochar derived from agricultural residue follows the principles of the circular economy and green chemistry, facilitating both environmental remediation and agricultural development. Due to the distinctive precursors—agricultural residues—biochar exhibits unique physicochemical properties, enabling it to interact differently with contaminants in real wastewater. Herein, this review addresses the knowledge gap in wastewater remediation using agricultural residue-based biochar. It compiles the principles of adsorption with agricultural waste-derived biochar, including general concepts, interactions between biochar and wastewater contaminants, and selective adsorption. The preparation, activation, modification, functionalization, and regeneration of such biochar, as well as their application to wastewater remediation, are comprehensively outlined. Furthermore, the economic evaluation and environmental impacts, as well as the future directions and challenges in this field, have also been presented. Full article

Clay-mediated microbial degradation has been demonstrated as a low-cost, efficient, and eco-friendly strategy for remediating crude oil-contaminated soils. Despite substantial laboratory studies, field tests remain scarce. In this study, montmorillonite treatment was applied to a crude oil production well pad shut down for 753 days. Post-treatment analyses included soil physicochemical parameters (water content, redox potential, pH, elemental analysis, and total organic carbon), crude oil content/composition (gas chromatography–mass spectrometry), microbial biomass (deoxyribonucleic acid concentration), and community structure (high-throughput sequencing), with parallel comparisons to untreated control areas. Results indicated that montmorillonite enhanced the crude oil biodegradation rate (37.27% vs. control 33.00%), increased microbial biomass (83.08% vs. control 35.06%), and enriched biodiversity (7 genera vs. control 0). Specifically, it exhibited the most pronounced promotion effects on saturated hydrocarbon degradation (73.42% vs. control 60.89%) and aromatic hydrocarbon degradation (45.77% vs. control 29.60%). This study not only provides field evidence for clay-mediated microbial remediation but also lays a foundation for developing composite remediation approaches (e.g., nutrient supplements, catalysts, or functional microbial consortia) in future research and practical applications. Full article