Search Results (75)

The accumulation of polyethylene (PE) in aquatic ecosystems represents a significant environmental challenge due to the polymer’s high molecular weight and chemical stability. This study investigates the biodegradation potential of Hafnia paralvei UUNT_MP29, a bacterial strain isolated from the gut of common carp (Cyprinus carpio), for low-density polyethylene (LDPE). Initial screening on LDPE-emulsified agar confirmed extracellular enzymatic activity through the formation of distinct clear zones. Quantitative analysis showed a cumulative mass loss of 24.10% by Day 16, with the most intensive degradation occurring between Days 4 and 8, which closely correlated with maximum bacterial count (CFU/mL). Kinetic modeling indicated that the degradation followed a first-order rate law (R² = 0.9269), with a rate constant (k) of 0.2991 days⁻¹ and a remarkably short half-life (t_1/2) of 2.32 days. Structural characterization via FTIR spectroscopy demonstrated oxidative transformation, evidenced by a reduction in sp³ C-H stretching and the emergence of C-O/C-O-C functional groups. SEM micrographs further confirmed extensive bio-deterioration, including surface pitting and macroscale erosion. Thermal analysis (TGA/DTG) supported these findings, showing a significant 10.95 °C decrease in the maximum degradation temperature (T_max), indicating a reduction in polymer chain length. These results suggest that H. paralvei UUNT_MP29 is a highly efficient agent for the rapid breakdown of polyethylene and highlight the potential of aquatic gut microbiota as reservoirs for plastic-degrading biotechnologies. Full article

Background: Sulfated chitosan (ChS) is a chemically modified polysaccharide derived from chitin that mimics heparan sulfate (HS) structures and has emerged as a promising antimicrobial biomaterial. Piscirickettsia salmonis, the etiological agent of Salmonid Rickettsial Septicemia (SRS), represents the main driver of antibiotic use in Chilean aquaculture. Objective: In this study, the in vitro antibacterial activity of ChS against P. salmonis was evaluated. Methods: Elemental characterization by SEM-EDS and FTIR analysis confirmed successful sulfation of the polymer, with a degree of sulfation ranging from 0.92 to 0.95. Additionally, X-ray diffraction (XRD) analysis revealed a reduction in polymer crystallinity, indicating a transition toward a more amorphous structure associated with increased molecular flexibility and functional group accessibility. Results: Antibacterial assays revealed a minimum inhibitory concentration (MIC) of 1500 µg/mL and a minimum bactericidal concentration (MBC ≥ 1500 µg/mL). LIVE/DEAD™ fluorescence imaging showed the formation of bacterial aggregates with increasing size, frequency, and red fluorescence compared to controls over the exposure to ChS, indicating progressive membrane damage. This was supported by a reduction (p < 0.05) in the Green/Red fluorescence ratio of 37–46% between 5 h and 96 h of exposure, corresponding to alteration of the cell membrane. Scanning electron microscopy revealed pronounced morphological alterations by ChS, including surface disruption and loss of cellular integrity. This was more severe compared to commercial chitosan (ChC). Also, ChS reduced (p < 0.05) biofilm formation (>50% at day 6 and 34.8% at day 8). Conclusions: These results demonstrated that ChS disrupts the cell membrane and reduces biofilm formation in P. salmonis, thereby affecting viability. This is the first report of the antibacterial effect of ChS, an HS analogue, against P. salmonis. Full article

Background and Objectives: The integration of chemotherapy (ChT) and immune checkpoint inhibitors (ICIs) has become a standard approach in oncology. Although the addition of ICIs to double-agent ChT regimens has demonstrated clinical benefit in multiple studies, other trials have reported no significant improvement. ChT is hypothesized to potentiate the effects of ICIs through multiple mechanisms, including tumor antigen release and modulation of the tumor microenvironment. This study aimed to evaluate whether nivolumab enhances the cytotoxic effects of cisplatin or paclitaxel in lung adenocarcinoma (A549) cell lines under immune-independent conditions. Materials and Methods: A549 lung alveolar carcinoma cell lines were treated with varying concentrations of nivolumab, cisplatin, and paclitaxel, individually and in combinations. Cytotoxicity and apoptosis were assessed using mitochondrial membrane potential analysis, cell viability assays, and morphological evaluation of cellular and nuclear alterations characteristic of apoptotic cell death. Results: Nivolumab alone exhibited no cytotoxic activity. The combination of cisplatin at its IC₅₀ (half-maximal inhibitory concentration) (3 µg/mL) with 13 µg/mL nivolumab yielded the most pronounced cytotoxicity (89%) compared to cisplatin alone (49%, p < 0.001). Paclitaxel combined with nivolumab increased cytotoxicity to 69% versus 51% for paclitaxel alone (p < 0.05). The enhancement effect was greater with cisplatin than with paclitaxel. Notably, adding nivolumab to the cisplatin–paclitaxel combination reduced cytotoxicity from 73% to 64%. Mechanistic analysis revealed a significant reduction in Rhodamine 123 fluorescence intensity in drug-treated groups versus controls (p < 0.001), indicating loss of mitochondrial membrane potential, a hallmark of intrinsic apoptotic activation, suggesting apoptotic priming. Conclusions: Nivolumab potentiates the cytotoxic effects of cisplatin and paclitaxel in A549 lung adenocarcinoma cells, with a more pronounced effect observed in combination with cisplatin. This enhancement is associated with mitochondrial membrane potential loss, supporting mitochondrial apoptotic priming as a potential underlying mechanism of drug synergy. Full article

The efficient recovery of coalbed methane (CBM) is critically constrained by the inherent low permeability of coal reservoirs, a challenge predominantly attributed to mineral blockages within the pore-fracture structure. In this study, the deashing efficacy of several acid solutions (HCl, HNO₃, HF, and CH₃COOH) on bituminous coals from the Yushuwan (YSW) and Jiangna (JN) mines was initially assessed to determine the optimal acidizing system. Subsequently, the multi-scale evolution of pore-fracture structures and the fractal characteristics of coal samples treated with the optimized acids were systematically investigated. A multi-analytical approach, integrating scanning electron microscopy (SEM), X-ray diffraction (XRD) with microcrystalline peak-fitting, and low-temperature nitrogen gas adsorption (LT-N₂GA), was employed to quantitatively elucidate the underlying transformation mechanisms. The experimental results indicate that HCl and HNO₃ emerged as the most effective agents for the YSW and JN coals, respectively. Optimized acidification achieved significant reductions in ash content (specifically, an ash removal efficiency of 83.99% for HCl-treated YSW coal) through the selective dissolution of carbonate and clay minerals, thereby facilitating the exposure of the organic matrix and the induction of extensive dissolution pits and secondary fractures. Although the dissolution-induced collapse of mineral-supported fine pores led to a reduction in both total pore volume and BET specific surface area, the average pore diameter undergoes a substantial increase (e.g., nearly doubling from 9.0068 nm to 16.5126 nm for the JN coal). Furthermore, the reduction in Frenkel–Halsey–Hill (FHH) fractal dimensions (D₁ and D₂) indicates a decrease in pore-surface complexity and structural heterogeneity. These findings reveal that optimized acidification induces significant alterations in pore structure and mineral composition. The treatment facilitates the conversion of isolated pores into interconnected networks, accompanied by an increase in pore volume and a shift in pore size distribution toward larger dimensions. This research elucidates the mechanisms of mineral dissolution and pore expansion, providing a fundamental characterization of the microstructural evolution of coal in response to acid treatment. Full article

Alkali-activated materials can significantly reduce carbon dioxide emissions compared with cement. However, their durability remains insufficiently understood. This study investigated the effects of calcium hydroxide (Ca(OH)₂, CH), an expansion agent (calcium sulfoaluminate, CSA), and a shrinkage-reducing agent (SRA) on the compressive strength and length change and determined the optimal content levels for each agent. Experiments were conducted to evaluate the compressive strength and length change of 17 mortar mixtures containing CH, CSA, and SRA. The substitution ratios of CH, CSA, and SRA were fixed at three predefined levels for each factor. The microstructural changes induced by the use of each agent were analyzed using pH measurements, porosity analysis, and X-ray diffraction. In addition, the water desorption behaviors associated with CSA and SRA were assessed. Experimental and statistical analyses demonstrated that the optimal contents of CH, CSA, and SRA for simultaneously improving the compressive strength and length change were 8.54, 10.0, and 0.76 wt.%, respectively. The use of CSA significantly enhanced the compressive strength development and dimensional stability of the mortar. This improvement was associated with a reduction in the porosity, which was attributed to ettringite formation. Furthermore, while the SRA slightly reduced the compressive strength, it significantly improved the dimensional stability. Full article

A targeted modification approach involving the synthesis of Ce/C co-doped TiO₂ aerogels (CeCTi) via a sol–gel method combined with supercritical CO₂ drying and subsequent heat treatment is employed to enhance the photocatalytic CO₂ reduction performance of cost-effective and stable TiO₂ aerogels. The results demonstrate that the CeCTi exhibits a pearl-like porous network structure, an optical band gap of 2.90 eV, and a maximum specific surface area of 188.81 m²/g. The black aerogel sample shows an enhanced light absorption capability resulting from the Ce/C co-doping, which is attributed to the formation of oxygen vacancies. Under simulated sunlight irradiation, the production rates of CH₄ and CO reach 27.06 and 97.11 μmol g⁻¹ h⁻¹ without any co-catalysts or sacrificial agents, respectively, which are 82.0 and 5.7 times higher than those of the pristine TiO₂ aerogel. DFT reveals that C-doping facilitates the formation of oxygen vacancies, which introduces defect states within the calculational band gap of TiO₂. The proposed photocatalytic mechanism involves the light-induced excitation of electrons from the valence band to the conduction band, their trapping by oxygen vacancies to prolong the charge carrier lifetime, and their subsequent transfer to adsorbed CO₂ molecules, thereby enabling efficient CO₂ reduction, which is experimentally supported by photoluminescence measurements. Full article

A species of the genus Tetracera has been used as herbal medicine in traditional Indian Tetracera loureiri medicine. Tetracera loureiri, a plant from the Dilleniaceae family is considered one of the most valuable herbs in Thailand and is native to Southeast Asia. However, the anti-obesity effects of Tetracera loureiri extract have not been reported. In this study, we screened the effect of EtOH extract on lipid accumulation in a 3T3-L1 adipocyte model at various concentrations using Oil Red O staining, and the results were visualized under a light microscope. The fractionation of the soluble CH₂Cl₂ and EtOAc fractions from the EtOH extract revealed that both fractions significantly inhibited lipid accumulation in adipocytes at 2.5, 5, and 10 μg/mL, compared to n-hexane, n-BuOH, and aqueous extracts. Bioactivity-guided fractionation of the CH₂Cl₂ and EtOAc extract led to the phytochemical investigation of 10 secondary metabolites (1–10), and the structure of these compounds was identified using various spectroscopic methods. All isolated compounds were evaluated for their ability to inhibit adipogenesis at a concentration of 2.5, 5, and 10 μM compared with positive control (Orlistat 100 μg/mL); in particular, compounds 1–3, 5, and 7–8 showed 57.39 ± 6.98, 19.35 ± 4.53%, 75.81 ± 1.75%, 17.61 ± 1.62%, 19.83 ± 5.27 and 14.66 ± 3.85% reduction in fat accumulation at 10 μMm in 3T3-L1 adipocytes, respectively. The activity of these compounds also inhibited the secretion of adiponectin and leptin in 3T3-L1 adipocytes, suggesting their role in disrupting adipocyte function and metabolic regulation. Therefore, the results herein provide experimental evidence supporting the potential of Tetracera loureiri extracts as an anti-obesity therapeutic agent. Full article

This study investigates the dynamics of carbon flux at the water–air interface during the ecological restoration of eutrophic water bodies. A controlled simulation of the eutrophic aquatic environment was carried out. A series of experiments was established, centered on submerged aquatic plants as key agents for carbon sequestration and enhancement of carbon sink capacity, supplemented by biological manipulation techniques aimed at pollution reduction and algal control. Results show that restoration systems based on submerged plants significantly enhance carbon sequestration, whereas systems relying solely on filter-feeding fish tend to increase the carbon emission burden. The submerged plant-only treatment (HV) exhibited the highest carbon absorption capacity (−72.53 mg·m⁻²·h⁻¹), followed by submerged plant + fish + snail (HSXB) and submerged plant + fish (HSX) treatments. CH₄ emissions were initially higher in the combined biological treatments but were eventually surpassed by the control group as algal cell density increased. Carbon sink potential and CH₄ emissions were strongly correlated with algal cell density and chlorophyll a concentration. While combination treatments (HSX and HSXB) effectively suppressed algal proliferation, the submerged plant-only treatment demonstrated superior nutrient removal efficiency. The findings provide theoretical support for ecologically based management strategies that simultaneously address eutrophication control and carbon sequestration in freshwater ecosystems, contributing to both water quality improvement and climate change mitigation. Full article

The rhenium(I) tricarbonyl complex fac-[Re(CO)₃(5,6-epoxy-5,6-dihydro-1,10-phenanthroline)Br] (ReL) has previously demonstrated promising luminescent properties, enabling its direct application as a probe for walled cells such as Candida albicans and Salmonella enterica. In this new study, we present a significantly expanded and comprehensive characterization of ReL, incorporating a wide range of experimental and computational techniques not previously reported. These include variable-temperature ¹H and ¹³C NMR spectroscopy, CH-COSY, single-crystal X-ray diffraction, Hirshfeld surface analysis, DFT calculations, Fukui functions, non-covalent interaction (NCI) indices, and electrochemical profiling. Structural analysis confirmed a pseudo-octahedral geometry with the bromide ligand positioned cis to the epoxy group. NMR data revealed the coexistence of cis and trans isomers in solution, with the trans form being slightly more stable. DFT calculations and aromaticity descriptors indicated minimal electronic differences between isomers, supporting their unified treatment in subsequent analyses. Electrochemical studies revealed two oxidation and two reduction events, consistent with ECE and EEC mechanisms, including a Re(I) → Re(0) transition at −1.50 V vs. SCE. Theoretical redox potentials showed strong agreement with experimental data. Biological assays revealed a dose-dependent cytotoxic effect on HeLa cells, contrasting with previously reported low toxicity in microbial systems. These findings, combined with ReL’s luminescent and antimicrobial properties, underscore its multifunctional nature and highlight its potential as a bioactive and imaging agent for advanced therapeutic and microbiological applications. Full article

The photocatalytic reduction of CO₂ in aqueous media offers a sustainable route for solar-to-fuel conversion, yet remains challenged by CO₂’s thermodynamic stability and kinetic inertness, low solubility, and competitive hydrogen evolution. Here, we investigate the interplay between ionic liquids (ILs), photocatalyst supports, and additive composition in directing product selectivity among CO, CH₄, and H₂. Using imidazolium acetate as a benchmark, we demonstrate that ILs not only pre-activate CO₂ but can also undergo decomposition pathways under illumination, notably Kolbe-type reactions leading to methane formation from acetate rather than from CO₂. Comparative studies of Pd-decorated TiO₂ and g-C₃N₄ nanosheets reveal distinct behaviors driven by their interfacial interactions with the imidazolim-based ionic liquid: weak interaction with TiO₂ strongly promotes hydrogen evolution, whereas strong coupling with g-C₃N₄ synergizes with C₁C₄ImOAc to trigger acetate-derived Kolbe reactivity. The systematic evaluation of alternative salts confirms the determinant role of anion basicity and medium-pH-basic anions facilitate CO₂ activation, whereas weakly basic or non-coordinating anions favor water splitting. Overall, these results clarify the dual role of ionic liquids as both CO₂ activators and sacrificial agents, and highlight design principles for improving product selectivity and efficiency in aqueous CO₂ photoreduction systems. Full article

Mastitis is one of the major diseases affecting dairy cattle worldwide. Antibiotic therapy remains the most widely used treatment. However, its effectiveness has been compromised due to the selection of antibiotic-resistant and biofilm-producing pathogenic bacteria. This promotes the search for alternatives that increase the antibacterial and antibiofilm efficacy of antibiotics such ceftiofur (CFT). Nisin (N) and chitosan (CH) may possess these properties. The aim of this study was to evaluate whether N + CFT and CH + CFT combinations enhance the antibacterial activity of the antibiotic on Staphylococcus aureus associated with bovine mastitis, as well as its antibiofilm effect. Two clinical isolates of S. aureus (AMC-43 and AMC-48) and the reference strain ATCC 27543 resistant to CFT were used. Through the microdilution method in 96-well microplates, the combination of sub-inhibitory concentrations of N (320 µg/mL) and CH (400 µg/mL) with CFT (1, 2, 4, and 8 µg/mL) significantly reduced bacterial growth; however, the CH + CFT mixtures were the most efficient. The crystal violet staining method and live cell plating showed antibiofilm activity in biofilm synthesis and in the reduction in living bacterial cells located inside this preformed structure. These results highlight N and CH as potential agents for the prevention or control of bovine mastitis. Full article

Reservoirs in the Orinoco Heavy Oil Belt, Venezuela, typically hold natural foamy oil. Gas liberation during depletion leads to a sharp increase in viscosity, adversely impacting development efficiency. Therefore, this paper proposes a natural gas (CH₄)–chemical synergistic huff-and-puff method (CCHP). It utilizes the synergism between a stable foam plugging system and natural gas to supplement reservoir energy and promote the generation of secondary foamy oil. To evaluate the performance of 20 types of foam stabilizers (polymers and surfactants), elucidate the influence on production and properties of key parameters, and reveal the flow characteristics of produced fluids, 24 sets of foam performance evaluation tests were conducted using a high-temperature foam instrument. Moreover, 15 sets of core experiments with production fluid visualization were performed. The results demonstrate that, in terms of individual components, XTG and HPAM-20M demonstrated the best foam-stabilizing performance, achieving an initial foam volume of 280 mL and a foam half-life of 48 h. Conversely, the polymer–surfactant composite of XTG-CBM-DA elevated the initial foam volume to 330 mL while maintaining a comparable half-life, further enhancing the performance of foaming capacity for a stable foam system. For further application in the CCHP, oil production shows a positive correlation with both post-depletion pressure and chemical agent concentration; however, the foam gas–liquid ratio (GLR) exhibits an inflection point, with the optimal ratio found to be 1.2 m³/m³. During the huff-and-puff process, the density and viscosity of the produced oil decrease cycle by cycle, while resin and asphaltene content show a significant reduction. Furthermore, visualization results reveal that the foam becomes finer, more stable, and more uniformly distributed under precise parameter control, leading to enhanced foamy oil effects and improved plugging capacity. Moreover, the foam structure transitions from an oil-rich state to a homogeneous and stable configuration throughout the CCHP process. This study provides valuable insights for achieving stable and sustainable development in natural foamy oil reservoirs. Full article

Background: Chagas disease poses a significant public health challenge, particularly impacting socioeconomically vulnerable populations. Current treatment strategies still rely on two nitro heterocyclic compounds: benznidazole and nifurtimox. Both agents exhibit limited therapeutic efficacy during the chronic phase of the disease and are often linked to severe adverse effects that frequently lead to treatment discontinuation. This urgent need for safer, more effective oral treatments drives the development of novel chemotypes. Objective: In this study, we advanced the preclinical evaluation of 4-imidazoline-1H-pyrazole derivatives, which have been identified as promising candidates against Trypanosoma cruzi. Methods: The candidate compound identified from the reversibility assay underwent further evaluation for its efficacy using a three-dimensional (3D) culture model and a Transwell co-culture system, in addition to the in vivo assessment. Results: Our findings revealed that compound 3m (3-Cl, 4-CH₃) exhibited low cytotoxicity while substantially decreasing the parasite burden in 3Dcardiac spheroid models. The compound effectively permeated Caco-2 cell monolayers and demonstrated the ability to inhibit T. cruzi infection in Vero cell cultures within a co-culture system. Furthermore, the 3m derivative not only controlled parasite resurgence but also showed significant therapeutic benefits in a murine model of acute T. cruzi infection, resulting in marked reductions in parasitemia and tissue parasitism, associated with diminished inflammatory infiltrate and cardiac fibrosis. Treatment with 3m increased the survival rate of infected mice to 40%, comparable to the reference drug benznidazole in several key pathological endpoints. Conclusion: These findings highlight the potential of 4-imidazoline-1H-pyrazole derivatives, particularly compound 3m, in mitigating the pathological effects associated with T. cruzi infection. Full article

In this work, the photocatalytic reduction of CO₂ was innovatively tested with the simultaneous removal and mineralization of a textile contaminant, methylene blue (MB), which acts as a sacrificial agent. The process was carried out in a flow regime under atmospheric conditions, using a liquid-phase photoreactor under UVA illumination with a duration of 24 h per test. Two commercial TiO₂-based photocatalysts, P25 and P90 from Evonik, were used and surface modified through the photodeposition of metallic nanoparticles of Pt, Au, and Pd, as they did not show gas-phase products from CO₂ reduction on their own. The optimal pH was 5, the decreasing order of activity by metal was Pt > Au > Pd, and the optimal MB concentration was 20 ppm. The major products were CH₄ and H₂ in the gas phase. The presence of CH₄ was only detected in the presence of a CO₂ flow. In the liquid phase, carboxylic acids were also detected in small amounts, and in the test, 100 ppm of MB ethanol was additionally detected. A 100% degradation of MB and 72.5% mineralization was achieved under the conditions of highest CH₄ production (20 ppm MB at pH 5 with 4 g·L⁻¹ P25-0.70%Pt). Full article

We report a rapid aqueous method for synthesizing monodisperse gold nanoparticles (AuNPs), employing 2-propynylamine as both an intrinsic reducing agent and a surface-stabilizing ligand. This self-mediated process—achieved in a single step—yields spherical AuNPs with an average diameter of 4.0 ± 1.0 nm and a well-defined localized surface plasmon resonance band centered at 520 nm. Acting as a bifunctional molecule, 2-propynylamine simultaneously reduces HAuCl₄·3H₂O to elemental gold and passivates the nanoparticle surface through coordination via the amine group, while preserving a terminal alkyne (–C≡CH) functionality. This reactive moiety remains exposed and chemically accessible, enabling post-synthetic modification through Cu(I)-catalyzed azide–alkyne cycloaddition. Control experiments using alternate milling times and vial composition confirmed the essential role of 2-propynylamine in mediating both reduction and surface functionalization. The resulting alkyne-functionalized AuNPs serve as versatile “click-ready” platforms for bioconjugation, sensing, and advanced material assembly. Overall, this scalable, green approach eliminates the need for external reducing or capping agents and provides a modular route to chemically addressable nanomaterials with tunable surface reactivity. Full article