Search Results (381)

Dynamic demand response (DDR) is the process of shifting power consumption towards periods of lower demand based on real-time energy pricing data. It is a flexibility measure utilised in the decarbonisation of the UK’s power system to reduce peak demand. Dynamic time-of-use (dTOU) tariffs, such as Agile Octopus, incentivise DDR by providing half-hourly electricity prices for each day. Through this incentive, households are offered the opportunity to reduce their energy costs by applying DDR to energy-intensive, deferrable loads. This paper presents an open-source, Internet of Things (IoT)-based system designed to automate DDR and streamline its implementation. The system identifies the period of lowest electricity prices and activates a relay during this period each day. For validation, the system was tested over a one-month experiment, which showed that, in a favourable scenario, it could reduce an appliance’s electricity costs by up to 44%. These results highlighted the system’s potential to deliver substantial energy cost savings, while also encouraging households to participate in flexibility measures that alleviate pressure on the National Grid. Full article

High penetration and output volatility of island wind and photovoltaics (PV) pose challenges to energy consumption and supply–demand balance, and cost-effective energy storage configuration. A coupled dispatch model for a wind–PV–storage system is proposed, which treats multiple canal units as virtual ‘loads’ that switch between generation and pumping under constraints of power balance and available water head model. Considering the variable reservoir–irrigation feature, a multi-objective model framework is developed to minimize both economic cost and storage capacity required. An augmented Lagrangian–Nash product enhanced NSGA-II (AL-NP-NSGA-II) algorithm enforces constraints of irrigation shortfall and overflow via an augmented Lagrangian term and allocates fair benefits across canal units through a Nash product reward. Moreover, updates of Lagrange multipliers and reward weights maintain power balance and accelerate convergence. Finally, a case simulation (3.7 MW wind, 7.1 MW PV, and 24 h rural load) is performed, where 440.98 kWh storage eliminates shortfall/overflow and yields 1.5172 × 10⁴ CNY. Monte Carlo uncertainty analysis (±10% perturbations in load, wind, and PV) shows that increasing storage to 680 kWh can stabilize reliability above 98% and raise economic benefit to 1.5195 × 10⁴ CNY. The dispatch framework delivers coordination of irrigation and power balance in island microgrids, providing a systematic configuration solution. Full article

The global shipping industry is surging ahead, and with it, a quiet revolution is taking place on the water: marine lithium-ion batteries have emerged as a crucial clean energy carrier, powering everything from ferries to container ships. When these vessels dock, they increasingly rely on shore power charging systems to refuel—essentially, plugging in instead of idling on diesel. But predicting how much power they will need is not straightforward. Think about it: different ships, varying battery sizes, mixed charging technologies, and unpredictable port stays all come into play, creating a load profile that is random, uneven, and often concentrated—a real headache for grid planners. So how do you forecast something so inherently variable? This study turned to the Monte Carlo method, a probabilistic technique that thrives on uncertainty. Instead of seeking a single fixed answer, the model embraces randomness, feeding in real-world data on supply modes, vessel types, battery capacity, and operational hours. Through repeated random sampling and load simulation, it builds up a realistic picture of potential charging demand. We ran the numbers for a simulated fleet of 400 vessels, and the results speak for themselves: load factors landed at 0.35 for conventional AC shore power, 0.39 for high-voltage DC, 0.33 for renewable-based systems, 0.64 for smart microgrids, and 0.76 when energy storage joined the mix. Notice how storage and microgrids really smooth things out? What does this mean in practice? Well, it turns out that Monte Carlo is not just academically elegant, it is practically useful. By quantifying uncertainty and delivering load factors within confidence intervals, the method offers port operators something precious: a data-backed foundation for decision-making. Whether it is sizing infrastructure, designing tariff incentives, or weighing the grid impact of different shore power setups, this approach adds clarity. In the bigger picture, that kind of insight matters. As ports worldwide strive to support cleaner shipping and align with climate goals—China’s “dual carbon” ambition being a case in point—achieving a reliable handle on charging demand is not just technical; it is strategic. Here, probabilistic modeling shifts from a simulation exercise to a tangible tool for greener, more resilient port energy management. Full article

In situ preparation routes have become central to advancing lead sulfide (PbS) quantum dots (QDs) for solar-energy conversion, owing to their ability to create strongly coupled QD/oxide interfaces that are difficult to achieve with ex situ colloidal methods, along with their simplicity and potential for low-cost, scalable processing. This review systematically examines the fundamental mechanisms, processing levers, and device implications of the dominant in situ approaches successive ionic layer adsorption and reaction (SILAR), voltage-assisted SILAR (V-SILAR), and chemical bath deposition (CBD). These methods enable conformal QD nucleation within mesoporous scaffolds, improved electronic coupling, and scalable low-temperature fabrication, forming the materials foundation for high-performance PbS-based architectures. We further discuss how these in situ strategies translate into enhanced solar-energy applications, including quantum-dot-sensitized solar cells (QDSSCs) and photoelectrochemical (PEC) hydrogen production, highlighting recent advances in interfacial passivation, scaffold optimization, and bias-assisted growth that collectively suppress recombination and boost photocurrent utilization. Representative device metrics reported in recent studies indicate that in-situ-grown PbS quantum dots can deliver photocurrent densities on the order of ~5 mA cm⁻² at applied potentials around 1.23 V versus RHE in photoelectrochemical systems, while PbS-based quantum-dot-sensitized solar cells typically achieve power conversion efficiencies in the range of ~4–10%, depending on interface engineering and device architecture. These performances are commonly associated with conformal PbS loading within mesoporous scaffolds and quantum-dot sizes in the few-nanometer regime, underscoring the critical role of morphology and interfacial control in charge transport and recombination. Recent studies indicate that performance improvements in PbS-based solar-energy devices are primarily governed by interfacial charge-transfer kinetics and recombination suppression rather than QD loading alone, with hybrid heterostructures and inorganic passivation layers playing a key role in modifying band offsets and surface trap densities at the PbS/oxide interface. Remaining challenges are associated with defect-mediated recombination, transport limitations in densely loaded porous scaffolds, and long-term chemical stability, which must be addressed to enable scalable and durable PbS-based photovoltaic and photoelectrochemical technologies. Full article

Long-duration energy storage (LDES) can deliver system-wide flexibility and decarbonization benefits, yet investment is often hindered because these benefits are diffuse and not fully monetized under conventional market structures. A public-asset-oriented valuation and cost-allocation framework is proposed for LDES. First, LDES externality benefits are quantified through a system-level optimization-based simulation on a stylized aggregated regional network, with key indicators including thermal generation cost, carbon penalty, renewable curtailment cost, involuntary load shedding, and end-user electricity expenditures. Second, LDES investment costs are allocated among thermal generators, renewable operators, grid entities, and end users via a benefit-based Nash bargaining mechanism. In the case study, introducing LDES reduces thermal generation cost by 3.92%, carbon penalties by 5.59%, and renewable curtailment expenditures by 7.07%, while eliminating load shedding. The resulting cost shares are 46.9% (renewables), 28.7% (end users), 22.4% (thermal generation), and 0.5% (grid entity), consistent with stakeholder-specific benefit distributions. Sensitivity analyses across storage capacity and placement further show diminishing marginal returns beyond near-optimal sizing and systematic shifts in cost responsibility as benefit patterns change. Overall, this framework offers a scalable, economically efficient, and equitable strategy for cost redistribution, supporting accelerated LDES adoption in future low-carbon power systems. Full article

Considering the global objective of carbon emission reduction, this paper focuses on optimizing the operational efficiency of grid-connected electric vehicles (EVs) and promoting sustainable energy integration and thus proposes a novel dual-incentive mechanism combining real-time pricing (RTP) and carbon quotas. A core of this study is the development of a bilevel programming model that effectively captures the strategic interaction between power suppliers (PS) and microgrid (MG) users. At the upper level, the model enables the PS to optimize electricity prices, achieving both revenue maximization and grid balance maintenance; at the lower level, it supports MGs in rational scheduling of EV charging/discharging, photovoltaic and wind energy (PWE) utilization, and load consumption, ensuring the fulfillment of user demands while maximizing MG profits. To address the non-convex factors in the model that hinder an efficient solution, another key is the design of a bilevel distributed genetic algorithm, which realizes efficient decentralized decision making and provides technical support for the practical application of the model. Through comprehensive simulations, the study verifies significant quantitative outcomes. The proposed algorithm converges after only 61 iterations, ensuring efficient solution performance. The average purchase price of electricity from the PS for the MG is USD 1.1, while the selling price of PWE sources from MG for the PS is USD 0.6. This effectively promotes the MG to prioritize the consumption of PWE sources and encourages the PS to repurchase the electricity generated by PWE sources. On average, carbon emissions decreased by approximately 300 g each time slot, and the average amount of carbon trading was around USD 8. Ultimately, this research delivers a practical and impactful solution for the development of MGs and the advancement of carbon reduction goals. Full article

In practical engineering, large-scale wind power integration typically requires long-distance transmission lines to deliver power to load centers. The resulting weak sending-end systems lack support from synchronous power sources. Under extreme weather conditions, the rapid increase in active power output caused by high wind power generation may lead to voltage instability. In existing projects, a phenomenon of repeated voltage fluctuations has been observed under fault-free system conditions. This phenomenon is induced by the coupling of the characteristics of weak sending-end systems and low-voltage ride-through (LVRT) discrimination mechanisms, posing a serious threat to the safe and stable operation of power grids. However, most existing studies focus on the analysis of voltage instability mechanisms and the optimization of control strategies for single devices, with insufficient consideration given to voltage fluctuation suppression methods under the coordinated operation of wind power and energy storage systems. Based on the actual scenario of energy storage configuration in wind farms, this paper improves the traditional LVRT discrimination mechanism and develops a coordinated voltage ride-through control strategy for permanent magnet synchronous generator (PMSG) wind turbines and energy storage batteries. It can effectively cope with unconventional operating conditions, such as repeated voltage ride-through and deep voltage ride-through that may occur under extreme meteorological conditions, and improve the safe and stable operation capability of wind farms. Using a hardware-in-the-loop (HIL) test platform, the coordinated voltage ride-through control strategy is verified. The test results indicate that it effectively enhances the wind–storage system’s voltage ride-through reliability and suppresses repeated voltage fluctuations. Full article

The paper introduces a real-time digital-twin controller that manages evacuation routes while operating GEEM for emergency energy management during building fires. The system consists of three interconnected parts which include (i) a physics-based hazard surrogate for short-term smoke and temperature field prediction from sensor data (ii), a router system that manages path updates for individual users and controls exposure and network congestion (iii), and an energy management system that regulates the exchange between PV power and battery storage and diesel fuel and grid electricity to preserve vital life-safety operations while reducing both power usage and environmental carbon output. The system operates through independent modules that function autonomously to preserve operational stability when sensors face delays or communication failures, and it meets Industry 5.0 requirements through its implementation of auditable policy controls for hazard penalties, fairness weight, and battery reserve floor settings. We evaluate the controller in co-simulation across multiple building layouts and feeder constraints. The proposed method achieves superior performance to existing AI/RL baselines because it reduces near-worst-case egress time ($T_{95}$ and worst-case exposure) and decreases both event energy $E_{\mathrm{e}\mathrm{v}\mathrm{e}\mathrm{n}\mathrm{t}}$ and CO₂-equivalent ${{CO}_2}_{\mathrm{e}\mathrm{v}\mathrm{e}\mathrm{n}\mathrm{t}}$ while upholding all capacity, exposure cap, and grid import limit constraints. A high-VRE, tight-feeder stress test shows how reserve management, flexible-load shedding, and PV curtailment can achieve trade-offs between unserved critical load $U_{\mathrm{e}\mathrm{n}\mathrm{e}\mathrm{r}\mathrm{g}\mathrm{y}}$ and emissions. The team delivers implementation details together with reporting templates to assist researchers in reaching reproducibility goals. The research shows that emergency energy systems, which integrate evacuation systems, achieve better safety results and environmental advantages that enable smart-city integration through digital thread operations throughout design, commissioning, and operational stages. Full article

The increasing deployment of hybrid renewable energy systems has introduced significant challenges in optimal energy dispatch and load balancing due to the intrinsic stochasticity and temporal variability of renewable sources, along with the multi-dimensional optimization requirements of simultaneously achieving economic efficiency, grid stability, and environmental sustainability. This paper presents GreenMind, a scalable Deep Reinforcement Learning framework designed to address these challenges through a hierarchical multi-agent architecture coupled with Long Short-Term Memory (LSTM) networks for predictive energy management. The framework employs specialized agents responsible for generation dispatch, storage management, load balancing, and grid interaction, achieving an average decision accuracy of 94.7% through coordinated decision-making enabled by hierarchical communication mechanisms. The integrated LSTM-based forecasting module delivers high predictive accuracy, achieving a 2.7% Mean Absolute Percentage Error for one-hour-ahead forecasting of solar generation, wind power, and load demand, enabling proactive rather than reactive control. A multi-objective reward formulation effectively balances economic, technical, and environmental objectives, resulting in 18.3% operational cost reduction, 23.7% improvement in energy efficiency, and 31.2% enhancement in load balancing accuracy compared to state-of-the-art baseline methods. Extensive validation using synthetic datasets representing diverse hybrid renewable energy configurations over long operational horizons confirms the practical viability of the framework, with 19.6% average cost reduction, 97.7% system availability, and 28.6% carbon emission reduction. The scalability analysis demonstrates near-linear computational growth, with performance degradation remaining below 9% for systems ranging from residential microgrids to utility-scale installations with 2000 controllable units. Overall, the results demonstrate that GreenMind provides a scalable, robust, and practically deployable solution for predictive energy dispatch and load balancing in hybrid renewable energy systems. Full article

Improving electronic and ionic transport and the structural stability of electrode materials is essential for the development of advanced lithium-ion batteries. Despite its great potential as a high-power anode, Ti₂Nb₁₀O₂₉ (TNO) still underperforms due to its unsatisfactory electronic and ionic conductivity. Here, a TNO/carbon microtube (TNO@CMT) composite is constructed via an ethanol-assisted solvothermal process and controlled annealing. The hollow carbon framework derived from kapok fibers provides a lightweight conductive skeleton and abundant nucleation sites for uniform TNO growth. By tuning precursor concentration, the interfacial structure and loading are precisely regulated, optimizing electron/ion transport. The optimized TNO@CMT-2 exhibits uniformly dispersed TNO nanoparticles anchored on both inner and outer CMT surfaces, enabling rapid electron transfer, short Li⁺ diffusion paths, and high structural stability. Consequently, it delivers a reversible capacity of 314.9 mAh g⁻¹ at 0.5 C, retains 75.8% capacity after 1000 cycles at 10 C, and maintains 147.96 mAh g⁻¹ at 40 C. Furthermore, the Li⁺ diffusion coefficient of TNO/CMT-2 is 5.4 × 10⁻¹¹ cm² s⁻¹, which is nearly four times higher than that of pure TNO. This work presents a promising approach to designing multi-cation oxide/carbon heterostructures that synergistically enhance charge and ion transport, offering valuable insights for next-generation high-rate lithium-ion batteries. Full article

The rise in thermal runaway events within electric vehicle (EV) battery systems requires anticipatory models to predict critical safety failures during operation. This investigation develops a multi-physics digital twin framework that links electrochemical, thermal, and structural domains to replicate the internal dynamics of lithium-ion packs in both normal and faulted modes. Coupled simulations distributed among MATLAB 2024a, Python 3.12-powered three-dimensional visualizers, and COMSOL 6.3-style multi-domain solvers supply refined spatial resolution of temperature, stress, and ion concentration profiles. While the digital twin architecture is designed to accommodate different battery chemistries and pack configurations, the numerical results reported in this study correspond specifically to a lithium NMC-based 4S3P cylindrical cell module. Quantitative benchmarks show that the digital twin identifies incipient thermal deviation with 97.4% classification accuracy (area under the curve, AUC = 0.98), anticipates failure onset within a temporal margin of ±6 s, and depicts spatial heat propagation through three-dimensional isothermal surface sweeps surpassing 120 °C. Mechanical models predict casing strain concentrations of 142 MPa, approaching polymer yield strength under stress load perturbations. A unified operator dashboard delivers diagnostic and prognostic feedback with feedback intervals under 1 s, state-of-health (SoH) variance quantified by a root-mean-square error of 0.027, and mission-critical alerts transmitting with a mean latency of 276.4 ms. Together, these results position digital twins as both diagnostic archives and predictive safety envelopes in the evolution of next-generation EV architectures. Full article

In rectifier design, the key parameters are the voltage–conversion ratio and the power conversion efficiency. A new circuit design approach is presented in which a capacitor-based, cross-coupled, differential-driven topology is used to boost the voltage–conversion ratio. The scheme also integrates an auxiliary current path to raise the power conversion efficiency. To demonstrate its practicality, two three-stage rectifiers were designed and fabricated using standard 65 nm CMOS technology. The designs were tested under various conditions to assess their performance. The first rectifier targets indoor light energy harvesting applications. It achieves a peak voltage conversion ratio of 3.94 and a maximum power conversion efficiency of 58.7% when driving a 600 Ω load, while supplying over 2 mA of output current. The second rectifier is optimized for RF energy harvesting at 2.4 GHz. Experimental results indicate that it can deliver 70 µA to a 50 kΩ load, with a peak voltage conversion ratio of 5 and a power conversion efficiency of 17.5%. Full article

Against the backdrop of rapid advances in computing, industry, and electric vehicles, DC–DC buck converters—as core point-of-load regulators—are critical for power supplies in applications with stringent voltage-stability requirements. This paper proposes a two-phase interleaved Buck converter based on positively coupled inductor with a high coupling coefficient. The innovation lies in the positively coupled inductor and two-phase interleaved architecture, where two MOSFETs and two diodes form a similar symmetrical full-bridge interleaved structures together achieve a higher conversion ratio and provide $ZCS$ operation for all power devices, thereby effectively reducing switching losses. Relative to traditional topologies, the proposed converter delivers a higher conversion ratio without extreme duty-cycle operation while improving reliability. After detailing the operating mechanism, we derive the input–output voltage relation, outline controller synthesis guidelines, and specify the soft-switching conditions. From the viewpoint of symmetry, the proposed interleaved converter exploits the electrical and magnetic symmetry between phases to achieve current balancing, extended duty-cycle range and soft-switching. Validation is provided by both a $PSIM$ simulation model and a $270W$ hardware prototype using an $STM32F103ZET6$, which achieves 93.3% peak efficiency at a conversion ratio of 0.45, demonstrating the practicality and effectiveness of the approach. Full article

Active-control coils on Keda Torus eXperiment (KTX) are used to suppress error fields and mitigate MHD instabilities, thereby extending discharge duration and improving plasma confinement quality. Achieving effective active MHD control imposes stringent requirements on the coil power supplies: wide-bandwidth and high-precision current regulation, deterministic low-latency response, and tightly synchronized operation across 136 independently driven coils. Specifically, the supplies must deliver up to ±200 A with fast slew rates and bandwidths up to several kilohertz, while ensuring sub-100 μs control latency, programmable waveforms, and inter-channel synchronization for real-time feedback. These demands make the power supply architecture a key enabling technology and motivate this work. This paper presents the design and simulation of the KTX active-control coil power supply. The system adopts a modular AC–DC–AC topology with energy storage: grid-fed rectifiers charge DC-link capacitor banks, each H-bridge IGBT converter (20 kHz) independently drives one coil, and an EMC filter shapes the output current. Matlab/Simulink R2025b simulations under DC, sinusoidal, and arbitrary current references demonstrate rapid tracking up to the target bandwidth with ±0.5 A ripple at 200 A and limited DC-link voltage droop (≤10%) from an 800 V, 50 mF storage bank. The results verify the feasibility of the proposed scheme and provide a solid basis for real-time multi-coil active MHD control on KTX while reducing instantaneous grid loading through energy storage. Full article

In grid-connected photovoltaic systems, improving power quality is necessary for assuring constant energy delivery, consistent voltages, and current, as well as being compliant with the standards of the grid. Yet, today’s PV control systems have to deal with serious problems, for example, slow MPPT reactions to changes in irradiation, significant harmonic distortion, weak reaction to voltage changes, and being unable to adapt well to different situations. For this reason, these problems lead to less efficient electricity, unstable connections to the power grid, and an altered quality of electricity, as solar power and load levels vary in real conditions. A way to solve these problems is introduced in this paper: (1) the Hippopotamus-based Solar Power MPPT Tracker and (2) a SyBel embedded controller for controlling the inverter. This kind of optimization mimics nature to control the duty cycle and enables the boost converter to deliver maximum power while responding quickly and maintaining accurate tracking. Meanwhile, the SyBel controller makes use of a hybrid technique by using SNN, DBN, and synergetic logic to sensibly manage the inverter switches and increase the power quality. The framework is novel because it uses biological optimization plus deep learning-based embedded control to instantly handle error reduction and harmonic suppression. The whole process records energy from solar panels, follows the maximum power point, changes its schedule as needed, and uses sophisticated controls in the inverter. We found that the proposed MPPT tracker achieves an impressive tracking efficiency of 98.6%, surpassing PSO, FLC, and ANFIS, and lowering the time required for tracking by 72%. The SyBel inverter controller provides outstanding results, keeping the voltage THD at 1.2% and current THD at 1.3%, which matches power quality standards. Full article