Search Results (21)

Rare-earth-doped upconversion nanoparticles (UCNPs) exhibit upconversion luminescence upon excitation with infrared light and have been extensively utilized in the field of biosensing. In this study, a UCNPs-based biosensor with porous silicon (PSi) as the substrate was developed for the first time, enabling the detection of target DNA molecule concentration. First, a PSi substrate was prepared via electrochemical etching and subsequently functionalized to enable target DNA molecules to immobilize onto the inner walls of the PSi substrate’s pores. Then, UCNPs-labeled probe DNA molecules hybridized with the target DNA molecules, enabling indirect attachment of UCNPs to the inner walls of the PSi substrate. Subsequently, the sample surface is irradiated with a 980 nm laser. Upconversion fluorescence images of the sample, both before and after the biological reaction, are captured using an image acquisition device. Image processing software is employed to calculate the average change in grayscale values, enabling the determination of the molecular concentration of target DNA. The limit of detection (LOD) of this method for target DNA molecular concentration is 86 pM, demonstrating that it enables low-cost, highly sensitive, rapid, and convenient biological detection of target DNA molecules. Full article

Microfluidic paper-based analytical devices (µPADs) convert ordinary cellulose into an active analytical platform where capillary gradients shape transport, surface chemistry guides recognition, and embedded electrodes or optical probes translate biochemical events into readable signals. Progress in fabrication—from wax and stencil barriers to laser-defined grooves, inkjet-printed conductive lattices, and 3D-structured multilayers—has expanded reaction capacity while preserving portability. Detection strategies span colorimetric fields that respond within porous fibers, fluorescence and ratiometric architectures tuned for low abundance biomarkers, and electrochemical interfaces resilient to turbidity, salinity, and biological noise. Applications now include diagnosing human body fluids, checking food safety, monitoring the environment, and testing for pesticides and illegal drugs, often in places with limited resources. Researchers are now using learning algorithms to read minute gradients or currents imperceptible to the human eye, effectively enhancing and assisting the measurement process. This perspective article focuses on the newest advancements in the design, fabrication, material selection, testing methods, and applications of µPADs, and it explains how they work, where they can be used, and what their future might hold. Full article

Lateral flow immunoassay (LFIA) is a promising tool for rapid detection in the field of agricultural product analysis due to its advantages of cost-effectiveness and operational simplicity. In this work, Eu metal–organic frameworks (MOFs) were introduced to LFIA as a rapid detection method characterized by high stability and low interference. Key research objectives included strong fluorescence, ease of labeling, and the utilization of fluorescent probes. Eu-MOFs were synthesized in one step via the hydrothermal method, exhibiting a fluorescence lifetime of 163 μs and spherical particles with diameters ranging from 250 to 400 nm. These conditions fulfill the characteristics and requirements of LFIA. Eu-MOFs exploit the porous nature of MOFs to mitigate the drawbacks associated with complex crosslinking agents. This enables antibody proteins to be cross-linked merely upon contact, thereby simplifying the detection process. A time-resolved LFIA method was developed utilizing Eu-MOFs for the detection of aflatoxin B1 (AFB1) in corn, achieving a limit of detection (LOD, IC10) of 0.149 ng/mL. The accuracy and reliability of the Eu-MOFs-LFIA method were validated through comparisons with spiked concentrations during spiking and blind sample analyses, with verification conducted using ultra-high-performance liquid chromatography mass spectrometry (UPLC-MS). Furthermore, testing of real samples demonstrated that the Eu-MOFs-LFIA method can effectively facilitate rapid detection of AFB1 in corn. Full article

Zinc-based MOFs exhibit significant advantages in ion detection due to their unique structure and chemical properties. They can efficiently and selectively recognize and detect specific ions, making them powerful analytical tools for applications in environmental monitoring, biomedical fields, and more. In this work, we used a simple ligand to improve the coordination environment of Zn²⁺ ions and successfully synthesized a 3D coordination compound Zn(all-bdc)(Py) MOF through a straightforward hydrothermal method at low temperature. Additionally, we explored the potential of this MOF as a bifunctional ion fluorescence probe for both cationic and anionic recognition. The results showed that this 3D porous MOF exhibited excellent recognition ability for trivalent iron ions (Fe³⁺) and potassium permanganate (KMnO₄⁻) ions due to its highly porous structures and efficient ion recognition. When iron ions were added to 500 μL and potassium permanganate ions were added to 100 μL, the fluorescence of the compound was effectively quenched, and the detection limits for these two ions were 0.95 μM and 0.13 μM, respectively. The mixed-ion experiments also demonstrated that even in the presence of similar ions, this 3D MOF still maintained good selective recognition ability, specifically identifying Fe³⁺ and KMnO₄⁻ ions. This work provides a novel synthetic strategy for the design of MOFs capable of mixed-ion recognition and detection, expanding their application potential in ion sensing and analysis. Full article

In this investigation, the parent clay mineral montmorillonite (Mnt) was acid activated using sulfuric acid (H₂SO₄) at a specific mass of acid to clay mineral of 0.2 (A-Mnt) prior to the preparation of the porous clay heterostructure precursor. The derived porous acid-activated clay heterostructure (PACH) exhibited properties different from those of the conventional one (PCH). The synthesized materials were characterized using different physiochemical techniques, such as X-ray fluorescence (XRF), powder X-ray diffraction (XRD), thermogravimetric analysis (TA), ²⁹Si MAS-NMR, nitrogen adsorption–desorption, and acidity using cyclohexylamine (CHA) as a probe molecule. The PACH had a surface area of 890 m²/g and an acidity of 0.56 mmol of protons/g. An evaluation of PCH materials was conducted to assess their effectiveness in removing basic blue 41 (BB-41) from aqueous solutions. The removal process was analyzed based on the initial concentration and pH of the BB-41 solution, and the amount of solid used, employing a batch approach. The removal efficiency was found to be greater at higher pH values, specifically between six and nine. Using the Langmuir model, the maximal removal capabilities of the studied materials were determined to be between 274 and 300 mg/g. According to the results of the regeneration tests, PACH materials could still be employed after seven cycles with a 25% efficiency loss and a 50% efficiency loss for PCH materials. Utilizing the Langmuir model equations and mass balance, a single-stage batch design was suggested to estimate the required masses to remove BB-41 at different percentages from a starting concentration of 200 mg/L. Full article

Cellulose acetate butyrate is a biodegradable cellulose ester bioplastic produced from plentiful natural plant-based resources. Solvent-exchange-induced in situ gels are particularly promising for periodontitis therapy, as this dosage form allows for the direct delivery of high concentrations of antimicrobial agents to the localized periodontal pocket. This study developed an in situ gel for periodontitis treatment, incorporating a combination of metronidazole and doxycycline hyclate, with cellulose acetate butyrate serving as the matrix-forming agent. Consequently, assessments were conducted on the physicochemical properties, gel formation, drug permeation, drug release, morphological topography, and antimicrobial activities of the formulation. The formulation demonstrated an increased slope characteristic of Newtonian flow at higher bioplastic concentrations. The adequate polymer concentration facilitated swift phase inversion, resulting in robust, solid-like matrices. The mechanical characteristics of the transformed in situ gel typically exhibit an upward trend as the polymer concentration increased. The utilization of sodium fluorescein and Nile red as fluorescent probes effectively tracked the interfacial solvent–aqueous movement during the phase inversion of in situ gels, confirming that the cellulose acetate butyrate matrix delayed the solvent exchange process. The initial burst release of metronidazole and doxycycline hyclate was minimized, achieving a sustained release profile over 7 days in in situ gels containing 25% and 40% cellulose acetate butyrate, primarily governed by a diffusion-controlled release mechanism. Metronidazole showed higher permeation through the porcine buccal membrane, while doxycycline hyclate exhibited greater tissue accumulation, both influenced by polymer concentration. The more highly concentrated polymeric in situ gel formed a uniformly porous structure. Metronidazole and doxycycline hyclate-loaded in situ gels showed synergistic antibacterial effects against S. aureus and P. gingivalis. Over time, the more highly concentrated polymeric in situ gel showed superior retention of antibacterial efficacy due to its denser cellulose acetate butyrate matrix, which modulated drug release and enhanced synergistic effects, making it a promising injectable treatment for periodontitis, particularly against P. gingivalis. Full article

In the past decades, porous coordination polymers (PCPs) based fluorescent (FL) sensors have received intense attention due to their promising applications. In this work, a soluble Zn-PCP is presented as a sensitive probe towards explosive molecules, chromate, and dichromate ions. In former reports, PCP sensors were usually ground into fine powders and then dispersed in solvents to form FL emulsion for sensing applications. However, their insoluble characters would cause the sensing accuracy which is prone to interference from environmental effects. While in this work, the as-made PCP could be directly soluble in organic solvents to form a clear solution with bright blue emission, representing the first soluble PCP based fluorescence sensor to probe explosive molecules under a homogeneous environment. Moreover, the FL PCP solution also shows sensitive detection behaviors towards the toxic anions of CrO₄²⁻ and Cr₂O₇²⁻, which exhibit a good linear relationship between the fluorescence intensity of Zn-PCP and the concentrations of both analytes. This work provides a reference for designing task-specific PCP sensors utilized under a homogeneous environment. Full article

The severity of the volatile organic compounds (VOCs) issue calls for effective detection and management of VOC materials. Metal-organic frameworks (MOFs) are organic-inorganic hybrid crystals with promising prospects in luminescent sensing for VOC detection and identification. However, MOFs have limitations, including weak response signals and poor sensitivity towards VOCs, limiting their application to specific types of VOC gases. To address the issue of limited recognition and single luminosity for specific VOCs, we have introduced fluorescent guest molecules into MOFs as reference emission centers to enhance sensitivity. This composite material combines the gas adsorption ability of MOFs to effectively adsorb VOCs. We utilized (MIL-125/NH₂-MIL-125) as the parent material for adsorbing fluorescent molecules and selected suitable solid fluorescent probes (FGFL-B₁) through fluorescence enhancement using thioflavin T and MIL-125. FGFL-B₁ exhibited a heightened fluorescence response to various VOCs through charge transfer between fluorescent guest molecules and ligands. The fluorescence enhancement effect of FGFL-B₁ on tetrahydrofuran (THF) was particularly pronounced, accompanied by a color change from yellow to yellowish green in the presence of CCl₄. FGFL-B₁ demonstrated excellent adsorption properties for THF and CCl₄, with saturated adsorption capacities of 655.4 mg g⁻¹ and 811.2 mg g⁻¹, respectively. Furthermore, FGFL-B₁ displayed strong luminescence stability and reusability, making it an excellent sensing candidate. This study addresses the limitations of MOFs in VOC detection, opening avenues for industrial and environmental applications. Full article

The rapid and specific point-of-care (POC) analysis of virulent pathogenic strains plays a key role in ensuring food quality and safety. In this work, a paper-based fluorescent phage biosensor was developed for the detection of the virulent E. coli O157:H7 strain (as the mode of virulent pathogens) in food samples. Firstly, phages that can specifically combine with E. coli O157:H7 (E. coli) were stained with SYTO-13 dye to prepare a novel fluorescent probe (phage@SYTO). Simultaneously, a micro-porous membrane filter with a pore size of 0.45 μm was employed as a paper chip so as to retain the E. coli-phage@SYTO complex (>1.2 μm) on its surface. The phage@SYTO (200 nm in size) was able to pass through the pores of the chip, and the complex could be retained on the paper chip using the free phage@SYTO probes. The E. coli-phage@SYTO could emit a visual fluorescent signal (excited at 365 nm; emitted at 520 nm) onto the chip, which could be detected by a smartphone to reflect the concentration of E. coli. Under optimized conditions, the detection limit was as low as 50 CFU/mL (S/N = 3) and exhibited a wide linear range from 10² to 10⁶ CFU/mL. The sensor has potential application value for the quick and specific POCT detection of virulent E. coli in foods. Full article

Porous aromatic framework materials with high stability, sensitivity, and selectivity have great potential to provide new sensors for optoelectronic/fluorescent probe devices. In this work, a luminescent porous aromatic framework material (LNU-23) was synthesized via the palladium-catalyzed Suzuki cross-coupling reaction of tetrabromopyrene and 1,2-bisphenyldiborate pinacol ester. The resulting PAF solid exhibited strong fluorescence emission with a quantum yield of 18.31%, showing excellent light and heat stability. Because the lowest unoccupied molecular orbital (LUMO) of LNU-23 was higher than that of the nitro compounds, there was an energy transfer from the excited LNU-23 to the analyte, leading to the selective fluorescence quenching with a limit of detection (LOD) ≈ 1.47 × 10⁻⁵ M. After integrating the luminescent PAF powder on the paper by a simple dipping method, the indicator papers revealed a fast fluorescence response to gaseous nitrobenzene within 10 s, which shows great potential in outdoor fluorescence detection of nitro compounds. Full article

In this study, carbon quantum dots (CQDs) from Magnolia Grandiflora flower as a carbon precursor were obtained using a hydrothermal method under the optimized conditions affected by various heating times (14, 16, 18, and 20 min) and various electric power inputs (900–1400 W). Then, hydrogen sulfide (H₂S) was added to dope the CQDs under the same manner. The aqueous solution of the S-CQDs were characterized by FTIR, XPS, EDX/SEM, and TEM, with nanoparticle size at around 4 nm. Then, the as-prepared S-CQDs were successfully applied with fine corn starch for detection of minutiae latent fingerprints on non-porous surface materials. It is demonstrated that the minutiae pattern is more clearly seen under commercial UV lamps with a bright blue fluorescence intensity. Therefore, this research has proved that the S-CQDs derived from plant material have a better potential as fluorescent probes for latent fingerprint detection. Full article

To improve the detection sensitivity of a porous silicon optical biosensor in the real-time detection of biomolecules, a non-spectral porous silicon optical biosensor technology, based on dual-signal light detection, is proposed. Double-light detection is a combination of refractive index change detection and fluorescence change detection. It uses quantum dots to label probe molecules to detect target molecules. In the double-signal-light detection method, the first detection-signal light is the detection light that is reflected from the surface of the porous silicon Bragg mirror. The wavelength of the detection light is the same as the wavelength of the photonic band gap edge of the porous silicon Bragg mirror. CdSe/ZnS quantum dots are used to label the probe DNA and hybridize it with the target DNA molecules in the pores of porous silicon to improve its effective refractive index and enhance the detection-reflection light. The second detection-signal light is fluorescence, which is generated by the quantum dots in the reactant that are excited by light of a certain wavelength. The Bragg mirror structure further enhances the fluorescence signal. A digital microscope is used to simultaneously receive the digital image of two kinds of signal light superimposed on the surface of porous silicon, and the corresponding algorithm is used to calculate the change in the average grey value before and after the hybridization reaction to calculate the concentration of the DNA molecules. The detection limit of the DNA molecules was 0.42 pM. This method can not only detect target DNA by hybridization, but also detect antigen by immune reaction or parallel biochip detection for a porous silicon biosensor. Full article

Amphiphilic random copolymer poly(methacrylamido-azobenzene)-ran-poly(2-hydroxyethylacrylate) (PMAAAB-ran-PHEA) was synthesized via hydrolysis of poly(methacrylamido-azobenzene)-ran-poly[2-((2′-tetrahydropyranyl)oxy)ethylacrylate] (PMAAAB-ran-P(THP-HEA)), which was prepared by conventional radical polymerization. PMAAAB-ran-PHEA micelles were then prepared via dialysis method against water with DMF as solvent. The structure, morphology, size, and low critical solution temperature (LCST) of PMAAAB-ran-PHEA and its micelles were determined by ¹H-NMR, GPC, TEM, and DLS. The thermo- and photo-responsive behaviors of the resulting polymer micelles were investigated with Nile red as a fluorescence probe. The results showed that PMAAAB-ran-PHEA micelles were porous or bowl-shaped and its size was 135–150 nm, and its LCST was 55 °C when F_MAAAB of the random copolymer was 0.5351; the hydrophobicity of the micellar core was changed reversibly under the irradiation of UV light and visible light without release of Nile red or disruption of micelles; the size and solubilization capacity of the micelles were dependent on temperature, and Nile red would migrate for many times between the water phase and the micelles, and finally increasingly accumulated during the repeated heating and cooling processes. Full article

Due to its lethal effect on the human body and other creatures, Cr(VI) ions have attained widespread public attention, and an effective adsorbent for removing Cr(VI) ions is vital. Chitosan (CS)/cellulose nanocrystals grafted with carbon dots (CNCD) composite hydrogel with strong sorption ability and sensitive detection ability for Cr(VI) was formed. The cellulose nanocrystals (CN) offered a natural skeleton for assembling 3D porous structures, and then improved the sorption ability for Cr(VI); moreover, carbon dots (CD) acted as a fluorescent probe for Cr(VI) and provided Cr(VI) adsorption sites. With a maximum adsorption capacity of 217.8 mg/g, the CS/CNCD composite hydrogel exhibited efficient adsorption properties. Meanwhile, with a detection limit of 0.04 μg/L, this hydrogel was used for selective and quantitative detection of Cr(VI). The determination of Cr(VI) was based on the inner filter effect (IFE) and static quenching. This hydrogel retained its effective adsorption ability even after four repeated regenerations. Furthermore, the economic feasibility of the CS/CNCD composite hydrogel over activated carbon was confirmed using cost analysis. This study provided one new method for producing low-cost adsorbents with effective sorption and sensitive detection for Cr(VI). Full article

The incorporation of a luminescent probe into a nano-vector is one of the approaches used to design chemosensors and nanocargos for drug delivery and theranostics. The location of the nano-vector can be followed using fluorescence spectroscopy together with the change of environment that affects the fluorescence properties. The ligand 9-anthracene carboxylate is proposed in this study as a luminescent probe to locate two types of manganese complexes inside three series of porous nanoparticles of different composition: resol-silica, carbon-silica and pure silica. The manganese complexes are a tetranuclear Mn^III cluster [Mn^III₄(μ-O)₂(μ-AntCO₂)₆(bpy)₂(ClO₄)₂] with a butterfly core, and a Mn^II dinuclear complex [{Mn^II(bpy)(AntCO₂)}₂(μ-AntCO₂)₂(μ-OH₂)]. The magnetic measurements indicate that both complexes are present as dinuclear entities when incorporated inside the particles. Both the Mn complexes and the nanoparticles are luminescent. However, when the metal complexes are introduced into the nanoparticles, the luminescent properties of both are altered. The study of the fluorescence of the nanoparticles’ suspensions and of the supernatants shows that Mn^II compounds seem to be more retained inside the particles than Mn^III compounds. The resol-silica nanoparticles with Mn^II complexes inside is the material that presents the lowest complex leaching in ethanol. Full article