Search Results (1,261)

This study examines the impact of vegetation structure on bird species richness and diversity across four urban parks in Chaoyang District, Beijing. Throughout the year, using the Point Count Method (PCM), a total of 68 bird species and 4279 individual observations were recorded, with surveys conducted across all four seasons to capture seasonal variations. The parks with more complex vegetation, such as those with a higher tree canopy cover of species like poplars, ginkgo, and Chinese pines, exhibited higher bird species richness. For example, Olympic Forest Park, with its dense vegetation structure, hosted 42 species, whereas parks with less diverse vegetation supported fewer species. An analysis using PERMANOVA revealed that bird communities in the four parks were significantly different from each other (F = 2.76, p = 0.04075), and every comparison between parks showed significant differences as well (p < 0.001). Variations in the arrangement and level of disturbance within different plant communities likely cause such differences. Principal component analysis (PCA) identified tree canopy cover and shrub density as key drivers of bird diversity. These findings underscore the importance of preserving urban green spaces, particularly those with a diverse range of native tree species, to conserve biodiversity and mitigate the adverse effects of urbanisation. Effective vegetation management strategies can enhance avian habitats and provide ecological and cultural benefits in urban environments. Full article

Low-concentration N₂O (≤5%) emissions from agricultural fields and waste treatment facilities in China reach 7.333 × 10⁵ t annually, making them a significant but inadequately controlled contributor to global warming. Agricultural wastes were selected as precursors to prepare biochar, including pecan shell (SH), poplar sawdust (JM), wheat straw (XM), and corn straw (YM), which were subsequently acid-modified with 0.1 mol L⁻¹ HCl. The objectives were (i) to quantify the enhancement in N₂O capture achievable by acid treatment, (ii) to elucidate the underlying chemisorption mechanism, and (iii) to identify the most efficient feedstock for practical deployment. Acid modification increased the oxygen content, specific surface area, and the number of hydroxyl and carboxyl groups on the biochar surface. Both modified and unmodified biochar followed the pseudo-second-order kinetic model (R² ≥ 0.960), indicating chemisorption-dominated processes. The adsorption performance ranked as XM > JM > SH > YM, with XM exhibiting the highest adsorption capacity (26.000 mol/kg unmodified, 43.088 mol/kg modified, 65.72% increase). The Langmuir model provided a better fit for N₂O adsorption, suggesting dynamic multilayer heterogeneous adsorption. The findings demonstrate that acid-modified biochar derived from agricultural waste is a scalable, economical, and environmentally friendly adsorbent for mitigating low-concentration N₂O emissions. Full article

This study focuses on the development of lignin-based carbon-fiber-reinforced laminated veneer lumber (LVL) beams for garden timber structures, addressing wood shortages and environmental concerns. The research consisted of three main phases: the extraction and characterization of the lignin from corn stalks; the preparation and characterization of lignin-based carbon fibers; the fabrication and testing of reinforced LVL beams. Lignin was extracted from corn stalks using a deep eutectic solvent, followed by the preparation of lignin-based carbon fibers through electrospinning. These carbon fibers were integrated with poplar veneers to create reinforced LVL beams. The test results demonstrated significant improvements in mechanical properties, with the reinforced LVL beams exhibiting a 17% increase in elastic modulus and a 30% enhancement in flexural strength compared with conventional LVL beams. Notable improvements were also observed in tensile strength, compressive strength, and shear strength. This research provides a novel approach for producing high-value-added carbon fibers from agricultural waste, advancing the development of sustainable building materials. Full article

Mercury (Hg) poses a significant threat to human health and ecosystems, garnering increased attention in environmental studies. This paper evaluates the dynamics of Hg accumulation in various common tree leaves, specifically white poplar, linden, and cherry plum, throughout their growing season. The findings offer valuable insights into air quality and the ability of urban vegetation to mitigate mercury pollution in urban areas. A case study was conducted in Turda, a town in northwestern Romania, where a former chlor-alkali plant operated throughout the last century. Although the plant ceased its electrolysis activities over 25 years ago, the surrounding soil remains contaminated with mercury (Hg) due to the significant amounts released during its operation. The results indicated that the Hg concentration varied between 2.4 and 7.3 mg kg⁻¹ dry weight (dw), exceeding the intervention threshold for soil of 2.0 mg kg⁻¹. Additionally, the Hg content in the leaf samples consistently increased over time, influenced by leaf age and tree species. The Hg content increased in the following order: cherry plum < white poplar < linden. On average, white poplar leaves accumulated 72 ng Hg g⁻¹ dw, linden leaves 128 ng Hg g⁻¹ dw, and cherry plum leaves 47 ng Hg g⁻¹ dw during the six-month monitored period from April to September. The results obtained can be used to evaluate the potential of different tree species for mitigating atmospheric Hg contamination and to elaborate on the suitable management of fallen leaves in the autumn. Full article

UDP-glycosyltransferases (UGTs) play essential roles in various biological processes, such as phytohormone homeostasis, abiotic stress adaptation, and secondary metabolite biosynthesis. Populus euphratica is a model species for investigating stress adaptation; however, the PeUGT gene family has yet to be systematically characterized. Here, we identified 134 UGT genes in P. euphratica. Phylogenetic analysis classified these genes into 16 major groups (A–P), and UGT genes within the same groups showed similar structural characteristics. Tandem duplication events were identified as the predominant mechanism driving the expansion of the PeUGT family. Cis-acting element analysis revealed an enrichment of motifs associated with developmental regulation, light response, phytohormone signaling, and abiotic stress in the promoters of PeUGT genes. Expression profiling demonstrated spatiotemporal regulation of the PeUGT genes under drought stress. Among them, PeUGT110 was significantly induced by PEG treatment in the leaf, root, and stem tissues of P. euphratica. Overexpression of PeUGT110 enhanced drought tolerance in transgenic Arabidopsis. Furthermore, the PeUGT110-OE lines exhibited reduced malonaldehyde accumulation, elevated proline content, higher superoxide dismutase activity, and upregulated expression of stress-related genes under drought stress. The results demonstrated that PeUGT110 plays a critical role in plant drought resistance. These findings establish a foundation for elucidating the function of PeUGT genes. Full article

Fabric veneer panels were prepared using ethylene-vinyl acetate copolymer film (EVA) as the intermediate layer and poplar plywood as the substrate. Eight fabrics with different compositions were selected for evaluation to screen out fabric materials suitable for poplar plywood veneer. The fabrics were objectively analyzed by bending and draping, compression, and surface roughness, and subjectively evaluated by establishing seven levels of semantic differences. ESEM, surface adhesive properties, and peel resistance tests were used to characterize the microstructure and physical–mechanical properties of the composites. The results show that cotton and linen fabrics and corduroy fabrics are superior to other fabrics in performance, and they are suitable for decorative materials. Because the fibers of the doupioni silk fabric are too thin, and the fibers of felt fabric are randomly staggered, they are not suitable for the surface decoration materials of man-made panels. The acetate veneer surface gluing performance was 1.31 MPa, and the longitudinal peel resistance was 20.98 N, significantly exceeding that of other fabric veneers. Through the subjective and objective analysis of fabrics and gluing performance tests, it was concluded that, compared with fabrics made of natural fibers, man-made fiber fabrics are more suitable for use as surface finishing materials for wood-based panels. The results of this study provide a theoretical basis and process reference for the development of environmentally friendly decorative panels, which can be expanded and applied to furniture, interior decoration, and other fields. Full article

Biodegradable polymer composites offer promising alternatives to petroleum-based plastics, supporting the principles of a zero waste and circular economy. This study investigates the reinforcing potential of alkali-treated wood flour derived from recycled pine (Pinus brutia Ten.) and poplar (Populus alba L.) waste wooden pallets in poly(lactic acid) (PLA) biocomposites. Wood flour was initially recovered through grinding and screening during recycling, followed by alkali treatment via a green chemistry approach to enhance interfacial bonding with the PLA matrix. The impact of alkali concentration and two fabrication methods—additive manufacturing (AM) and injection molding (IM)—on the properties of developed biocomposite materials was assessed through mechanical, physical, morphological, and thermal analyses. IM samples outperformed AM counterparts, with the IM PLA containing 30 wt% wood flour (alkali-treated with 10% solution) showing the highest mechanical gains: tensile (+71.35%), flexural (+64.74%), and hardness (+2.62%) compared to untreated samples. Moreover, the AM sample with 10 wt% wood flour and 10% alkali treatment showed a 49.37% decrease in water absorption compared to the untreated sample, indicating improved hydrophobicity. Scanning electron microscopy confirmed that alkali treatment reduced void content and enhanced morphological uniformity, while thermal properties remained consistent across fabrication methods. This work introduces a green composite using non-toxic materials and treatments, facilitating eco-friendly production aligned with zero waste and circular economy principles throughout the manufacturing lifecycle. Full article

The screening of poplar varieties that demonstrate tolerance to low nitrogen (N) represents a promising strategy for improving nitrogen-use efficiency in trees. Such an approach could reduce reliance on N fertilizers while mitigating environmental pollution associated with their cultivation. In this study, a total of 87 poplar varieties were evaluated in a controlled greenhouse pot experiment. Under both low-nitrogen (LN) and normal-nitrogen (NN) conditions, 18 traits spanning four categories—growth performance, leaf morphology, chlorophyll fluorescence, and N isotope parameters were measured. For 13 of these traits (growth, leaf morphology, chlorophyll fluorescence), genetic variation and parameters, including genotypic values, were analyzed using best linear unbiased prediction (BLUP) within a linear mixed model (LMM). LN tolerance of tested poplar varieties was comprehensively assessed with three MGIDI strategies by integrating means, BLUPs, and low-nitrogen tolerance coefficient (LNindex) to rank poplar varieties. The results exhibited highly significant differences across all traits between LN and NN experiments, as well as among varieties. LN stress markedly inhibited growth, altered leaf morphology, and reduced chlorophyll fluorescence parameters in young poplar plants. Among the selection strategies, the MGIDI_LNindex approach demonstrated the highest selection differential percent (SD% = 10.5–35.23%). Using a selection intensity (SI) of 20%, we systematically identified 17 superior genotypes across all three strategies. In a thorough, comprehensive MGIDI-based evaluation, these varieties exhibited exceptional adaptability and stability under LN stress. The selected genotypes represent valuable genetic resources for developing improved poplar cultivars with enhanced low-nitrogen tolerance. Full article

The standardization of physical and mechanical properties is critical for the large-scale application of engineered bamboo products. In this study, the distribution characteristics of density and modulus of elasticity (MOE) were systematically examined in a large sample of flattened bamboo boards. The density and MOE ranged from 0.46 to 1.12 g/cm³ and 5.60 to 22.18 GPa, respectively. Both exhibited a decreasing trend with increasing board thickness. Based on interquartile analysis, four density grades and five MOE grades were established. A strong positive correlation was identified between density and MOE, indicating that density—closely linked to fiber volume fraction—is the primary factor influencing mechanical performance. Notably, the graded bamboo boards demonstrated significantly higher modulus values than conventional wood veneers such as hemlock and poplar, highlighting their potential for high-performance structural applications. This study proposes a practical grading framework that contributes to the standardization and broader engineering utilization of flattened bamboo boards. Full article

Thermal modification applies to a technique for the enhancement of biological durability, stability, and appearance of wood. Much is known about its effects on the chemical and physical attributes of wood. However, there is a knowledge gap concerning the effects of heat treatment on surface coating performance of different wood species. The focus of this research is heat treatment regulation of 160 °C, 180 °C, and 200 °C for three commercially important wood species which are Populus (poplar), Quercus (oak), and Pinus (pine). These treatments were evaluated in relation to coating performance indicators adhesion, integrity, and visual stability during and after natural and artificial weathering. It was revealed that specific responses among species differences exist. Populus behaved differently and exhibited a steady loss in mass and volume. Quercus demonstrated gradual degradation alongside enhanced lignin stability. Pinus exhibited maintenance of volume and mass until 180 °C after which accelerated degradation was observed. Coating durability and adhesion exhibited dependence on thermal condition, wood species, porosity, surface chemistry and microstructural variations that occurred. The research results can be used to streamline finishing processes for thermally modified wood while underscoring the critical nature of precise treatment parameter adjustments guided by species-specific responses to ensure long-term stability. Full article

Fast-growing hardwoods like poplar often lack natural durability in outdoor use and require homogeneous impregnation with protective agents, though achieving homogeneity remains a known challenge. Various anatomical structures influence fluid transport in wood. This study compares characteristics of pits in libriform fibres, between ray–vessel interfaces, and between vessel-to-vessel connections in normal wood and tension wood of a hybrid poplar genotype (Populus × canadensis, ‘Gelrica’), including both impregnated (with an aqueous, dye-containing solution) and non-impregnated regions, to identify anatomical barriers to impregnation. Light and scanning electron microscopy revealed significant differences in pit morphology and frequency in libriform fibres between normal wood and tension wood. In non-impregnated regions, pits were often encrusted. Vessel–ray pits did not differ between normal wood and tension wood but showed distinct differences between impregnated and non-impregnated regions: in the latter, pits were occluded by tylose-forming layers. Intervessel pits differed in border and aperture size between earlywood and latewood in both normal wood and tension wood. Hence, fluid transport is strongly impeded by occluded vessel–ray pits and, to a lesser extent, by encrusted fibre pits. Full article

This study presents the design and fabrication of a glass fiber–poplar veneer composite plate, investigating how varying interlayer configurations of glass fiber (single- and double-layer) and the arrangement of poplar veneer layers (odd and even) impact the mechanical and thermal insulation characteristics of these composite plates. Compared to plywood made from natural wood, glass fiber significantly improved the properties of fast-growing poplar plywood. The highest impact strength increased by 3.62 times, while the flexural strength increased by 26.22% and the tensile strength by 29.66%. The thermal diffusion coefficient of the experimental group decreased by 40.74%, indicating better insulation. Interestingly, single-layer glass fiber is superior to a double-layer structure in terms of thermal insulation. An optimal interlayer structure was identified, comprising one veneer layer between two layers of glass fiber cloth, repeated three times. Abaqus 2019 was used for finite element analysis (FEA). The simulation results agree with the experimental data to within 5%. These findings confirm the importance of structural configuration in determining the properties of composite materials, providing a theoretical basis for the structural design of fiber–reinforced composite materials. Full article

Leaves are essential for photosynthesis and transpiration, directly influencing plant growth and development. Leaf morphology, such as length, width, and area, affects photosynthetic efficiency and transpiration rates. In this study, we investigated the role of PtoWOX1 in leaf morphogenesis by generating both overexpression and CRISPR/Cas9 knockout lines in P. tomentosa. The results showed that PtoWOX1A and PtoWOX1B encode nuclear-localized transcription factors highly expressed in young leaves, particularly in palisade and epidermal cells. Knockout of PtoWOX1 resulted in reduced leaf width and area, enlarged upper epidermal cells, and lower stomatal density. Overexpression led to wrinkled leaf surfaces and reduced margin serration. Anatomical analysis revealed altered palisade cell arrangement and increased leaf thickness in knockout lines, accompanied by higher chlorophyll content and enhanced photosynthetic rates. Additionally, PtoWOX1A interacts with PtoYAB3B, suggesting a complex that regulates leaf margin development. These findings clarify the function of PtoWOX1 in regulating mid-lateral axis development and leaf margin morphology and provide new insights for the molecular breeding of poplar. Full article

The distinctive leaf and twig heteromorphism in Euphrates poplar (Populus euphratica Oliv.) reflects its adaptive strategies to cope with arid environments across ontogenetic stages. In the key distribution area of P. euphratica forests in China, we sampled P. euphratica twigs (which grow in the current year) at different age classes (1-, 3-, 5-, 8-, and 11-year-old trees), then analyzed their morphological traits, biomass allocation, as well as allometric relationships. Results revealed significant ontogenetic shifts: seedlings prioritized vertical growth by lengthening stems (32.06 ± 10.28 cm in 1-year-olds) and increasing stem biomass allocation (0.36 ± 0.14 g), while subadult trees developed shorter stems (6.80 ± 2.42 cm in 11-year-olds) with increasesd petiole length (2.997 ± 0.63 cm) and lamina biomass (1.035 ± 0.406 g). Variance partitioning showed that 93%–99% of the trait variation originated from age and individual differences. Standardized major axis analysis demonstrated a consistent “diminishing returns” allometry in biomass allocation (lamina–stem slope = 0.737, lamina–petiole slope = 0.827), with age-modulated intercepts reflecting developmental adjustments. These patterns revealed an evolutionary trade-off strategy where subadult trees optimized photosynthetic efficiency through compact architecture and enhanced hydraulic safety, while seedlings prioritized vertical space occupation. Our findings revealed that heteromorphic twigs play a pivotal role in modular trait coordination, providing mechanistic insights into P. euphratica’s adaptation to extreme aridity throughout its lifespan. Full article

In this work, we evaluated the silvicultural and ecological parameters of Populus bolleana Lauche trees growing in conditions of anthropogenic pollution, using the example of one of the largest megacities of the Donetsk ridge, the city of Donetsk. The objectives of this study included determining the level of anthropogenic load of the territory; conducting dendrological studies to assess morphometric and allometric parameters, age structure, and condition of P. bolleana stands under the influence of environmental factors; as well as completing biomechanical studies to assess and predict the mechanical stability of stands. A total of 1109 plants growing in areas with increased anthropogenic load and in the control areas were studied. The model territories of the study were located in the city of Donetsk on Fallen Communards Avenue (length of field routes: 2.6 km) and Ilyicha Avenue (length of field routes: 9.7 km). Control plantings grew on the territory of the Donetsk botanical garden and residential (dormitory) districts of the city. The age structure of P. bolleana plantations remained uniform throughout the city for 50–55 years due to the fact that the landscaping was under a single state program. In the steppe zone in the south of the East European Plain, with a high level of anthropogenic load and severe natural climatic factors, the critical age of P. bolleana (55 years) was determined. The condition of plantations and their morphometric indices correlate with the level of anthropogenic load of the city (H, Dbase, DBH). Under control conditions, the plants are in good condition with signs of weakening (2 points). Under conditions of increased anthropogenic load, the plants are in a severely weakened condition (3 points). A total of 25% of the plants in the sample are in critical condition (4–5 points). The main damages to the crowns and trunks of plants include core rot, mechanical damage to bark and tissues, the development of core rot through the affected skeletal branch, crown thinning, and drying. P. bolleana trees are valued for their crown area and ability to retain dust particles from the air. The analysis of experimentally obtained data on the crown area showed that in the initial phases of ontogenesis, the average deviation in the crown area of plants does not depend on the place of growth. Due to artificial narrowing and sanitary pruning of the crown, as well as skeletal branches dying along the busiest highways, the values do not exceed 22–23 m² on average, with an allometric coefficient of 0.35–0.37. When comparing this coefficient in the control areas, the crown area in areas with a high level of anthropogenic load is 36 ± 11% lower. For trees growing under the conditions of the anthropogenic load of an industrial city and having reached the critical age, mechanical resistance varied depending on the study area and load level. At sites with a high level of pollution of the territory, a significant decrease in indicators was revealed in comparison with the control (mcr—71%, EI—75%, RRB—43%). Having analyzed all the obtained data, we can conclude that, until the age of 50–55 years, P. bolleana retains good viability, mechanical resistance, and general allometric ratios, upon which the stability of the whole plant depends. Even with modern approaches and tendencies toward landscaping with exotic introductions, it is necessary to keep P. bolleana as the main species in dendrobanocenoses. Full article