Search Results (2,164)

Lithocarpus litseifolius, a traditional sweet tea rich in dihydrochalcones, relies on plant nutrients for secondary metabolite accumulation. However, nutrient distribution patterns during leaf development and its relationship with secondary metabolites remain inadequately characterized. This study examined mineral elements, carbon and nitrogen metabolites, and primary dihydrochalcones in L. litseifolius leaves at various developmental stages, and analyzed their interrelationships. Mineral nutrients such as phosphate (P), potassium (K), magnesium (Mg), zinc (Zn), boron (B), and copper (Cu), along with trilobatin, were most abundant in the youngest leaves. Conversely, calcium (Ca), iron (Fe), sulfur (S), manganese (Mn), selenium (Se), sugars, soluble protein, amino acids, chlorophyll, and carotenoids predominantly accumulated in old leaves, paralleling the distribution of phlorizin. Nitrogen (N) and molybdenum (Mo) concentrations were higher in mature leaves. In young leaves, P, K, Mg, S, Mn, Zn, and B positively correlated with phlorizin and trilobatin, while N, chlorophyll, carotenoids, and fructose correlated negatively. Trilobatin was the primary contributor to hydroxyl radical (·OH) scavenging capacity. Redundancy analysis highlighted N, P, Mg, B, Zn, Cu, Fe, Mo, and Se as key mineral nutrients influencing phlorizin and trilobatin accumulation. These findings offer insights for mineral nutrient management and effective utilization of L. litseifolius. Full article

Microminerals such as cobalt (Co), copper (Cu), iodine (I), iron (Fe), manganese (Mn), molybdenum (Mo), selenium (Se), and zinc (Zn) play key roles in cattle health. However, trace element imbalances are often underdiagnosed. This study retrospectively analyzed serum samples from 1273 cows across 117 herds in Spain, encompassing conventional dairy (n = 46), pasture-based dairy (n = 11), organic dairy (n = 25), and semi-extensive beef (n = 35) systems. Trace elements were determined by inductively coupled plasma mass spectrometry (ICP-MS). All herds were investigated for clinical or productive issues where mineral deficiencies were suspected. Significant differences were found in serum trace mineral concentrations between production systems. Adequacy rates were highest in conventional dairy herds receiving routine mineral supplementation, while deficiencies in Se, I, and Cu were frequently detected in pasture-based, organic, and beef herds. Zinc deficiencies were rare and typically involved complex, combined deficiencies. At the farm level, multielement deficiencies (≥3 elements) were detected in 39–45% of organic, pasture-based, and beef herds, but in only 5% of conventional dairy herds (p < 0.001). Principal component and cluster analyses produced consistent groupings of minerals according to dietary supplementation and soil-driven exposure. These findings highlight the increased vulnerability of low-input systems to complex micromineral imbalances and underline the importance of system-adapted mineral-monitoring and supplementation strategies in herd health management. However, as the study is based on diagnostic submissions rather than a randomized herd survey, the findings should be interpreted with caution due to potential selection bias. Full article

Cilantro (Coriandrum sativum L.) is a popular annual culinary herb grown for its leaves or seeds. With the increase in hydroponic herb production in controlled environments, a need exists for leaf tissue nutrient standards specific to this production system. The objective of this study was to develop comprehensive foliar mineral nutrient interpretation ranges for greenhouse-grown cilantro. Cilantro plants were grown in a hydroponic sand culture system to induce and document nutritional disorders. Plants were supplied with a modified Hoagland’s solution, which was adjusted to individually add or omit one nutrient per treatment while holding all others constant. Deficiency and toxicity symptoms were photographed, after which the plant tissue was collected to determine plant dry weight and critical tissue nutrient concentrations. Nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), sulfur (S), boron (B), iron (Fe), and zinc (Zn) deficiencies, as well as B toxicity, were induced. Deficiencies of copper (Cu), manganese (Mn), and molybdenum (Mo) were not observed during the experiment. Additional foliar tissue analysis data (n = 463) were compiled to create nutrient interpretation ranges for 12 essential elements based on a hybrid meta-analysis Sufficiency Range Approach (SRA). This approach defines ranges for deficient, low, sufficient, high, and excessive values. For each element, the optimal distribution was selected according to the lowest Bayesian Information Criterion (BIC) value. A Normal distribution best represented K and S. A Gamma distribution best represented P, Ca, Mn, and Mo, whereas a Weibull distribution best represented N, Mg, B, Cu, Fe, and Zn. These interpretation ranges, along with descriptions of typical symptomology and critical tissue nutrient concentrations, provide useful tools for both diagnosing nutritional disorders and interpreting foliar nutrient analysis results of greenhouse-grown cilantro. Full article

Sustainable waste management is one of the most serious global challenges today. Reusing waste materials can be an effective alternative to landfill, while recovering valuable nutrients. The purpose of this six-year field study was to investigate the potential of bottom ash from combustion of bituminous coal or biomass and municipal sewage sludge, and different doses of the waste mixtures, as a micronutrient source for plants. Yield, concentration, concentration index, uptake and simplified balance of the micronutrients (manganese, iron, molybdenum, cobalt, aluminium) in plant biomass were measured. Results showed that the wastes differently affected the parameters studied, which generally increased via treatment as follows: coal ash, biomass ash < coal or biomass ash mixtures with sewage sludge < sewage sludge. Irrespective of treatment, micronutrient recovery rate followed the following trend: Mn > Mo > Fe > Co > Al, from 0.32–25.82% for Mn to 0.04–0.28% for Al. For individual elements, recovery depended on waste. For Mn, Fe and Al, the application of ash separately or in mixtures with sludge at higher doses reduced recovery (0.04–0.78%). For Mn, Fe, Al and Mo, the application of ash–sludge mixtures at lower doses increased recovery (0.11–5.82%), with the highest recoveries when sludge was used separately (0.28–25.82%). For Co, the separate application of sewage sludge and ash–sludge mixture at the lower dose increased recovery (2.41–2.52%), with the highest Co recovery following the separate application of coal ash (2.78%). Ash, sludge and their mixtures were a valuable source of micronutrients for plants. Ash–sludge mixtures improved micronutrient uptake compared to ash used separately. Application of these wastes as fertilisers aligns with the EU Action Plan on the Circular Economy and can contribute to achieving SDGs 2 and 12. Full article

The growing demand for ultra-low sulfur fuels has intensified interest in recovering strategic metals from the large volumes of hazardous hydrodesulfurization catalysts that are discarded yearly. This work evaluates a task-specific ionic liquid, tri-n-octylammonium bis(2-,4-,4-trimethylpentyl)-phosphinate [TOA][Cy272], synthesized by the acid–base neutralization of tri-n-octylamine and Cyanex 272. FT-IR spectroscopy confirmed complete proton transfer and the formation of a stable ion pair. Liquid–liquid extraction tests were conducted with synthetic Co–Ni–Mo solutions (0.1–2.5 g/L each), a varying ionic liquid concentration (10–50 vol%), pH (1.5–12.5), and organic/aqueous ratio (1:1). At 35 vol% of ionic liquid and pH 2, the extraction efficiency for Mo reached 94%, with separation factors βMo/Ni = 12 and βMo/Co = 7.5; Co and Ni uptake remained ≤15%. Selectivity decreased at higher metal loadings because of ionic liquid saturation, and an excessive ionic liquid amount (>35%) offered no benefit, owing to viscosity-limited mass transfer. Stripping studies showed that 1 M NH₄OH stripped about 95% Mo, while leaving Co and Ni in the organic phase; conversely, 2 M HCl removed 92–98% of Co and Ni, but <5% Mo. Overall Mo recovery of about 95% was obtained by a two-step extraction/stripping scheme. The results demonstrate that [TOA][Cy272] combines the cation exchange capability of quaternary ammonium ILs with the strong chelating affinity of organophosphinic acids, delivering rapid, selective, and regenerable separation of Mo from mixed-metal leachates and wastewater streams. Full article

Molybdenum (Mo) is an important trace nutrient element in the soil and plays a significant role in maintaining plant growth. However, there are scarce studies on soil Mo content change and its driving factors based on historical soil samples. This paper studied the characteristics of Mo content in three different parent rock types (PRTs) and different eras. The findings indicated that the available Mo (AMo) and total Mo (TMo) in the purple soil were 0.087–0.131 mg/kg and 0.488–0.903 mg/kg, respectively, which were considered deficient. The TMo of J₃p was higher than those of J₂s and K₂j, but the AMo was slightly lower than those of K₂j and J₂s. Compared with the old samples, the AMo of K₂j, J₂s and J₃p has increased by 35.58%, 120% and 30.86%, respectively, and their TMo has increased by 29.37%, 25.21% and 11.97%, respectively. Our studies showed that PRTs directly impacted AMo, and indirectly influenced TMo and AMo through soil pH and organic matter. Organic matter and pH positively affected TMo, while pH negatively affected AMo. Overall, soil molybdenum content in the study area was generally insufficient, and local governments should comprehensively consider the molybdenum content and its main constraints for scientific fertilisation. Full article

Beyond the extensively studied two-dimensional transition metal dichalcogenides, a wide range of non-stoichiometric transition metal sulfides, such as molybdenum sulfides and tungsten sulfides (Mo₂S₃, W₂S₃, Mo₆S₈, Mo₆S₆, NiMo₃S₄), have attracted significant attention for their promising applications in sensing, catalysis, and energy storage. It is necessary to review the current advanced progress of non-stoichiometric transition metal sulfides for various applications. Here, we systematically summarize the synthesis strategies of the non-stoichiometric transition metal sulfides, encompassing methods such as the molten salt synthesis method, high-metal-content growth strategy, and others. Particular emphasis is placed on how variations in the metal-to-sulfur ratio give rise to distinct crystal structures and electronic properties, and how these features influence their conductivity, stability, and performance. This review will deepen the understanding of the state of the art of non-stoichiometric transition metal sulfides, including the synthesis, characterization, modification, and various applications. Full article

Photocatalysis offers a cost-effective and eco-friendly approach for environmental remediation, yet traditional powdered photocatalysts suffer from poor recyclability and separation challenges. To address these limitations, we developed a recyclable carbon fiber-supported composite photocatalyst (CC/TiO₂ NRs@MoS₂ NPs) featuring a three-dimensional hierarchical core–shell architecture. This structure comprises a TiO₂ seed layer, vertically aligned TiO₂ nanorod arrays as the core, and a MoS₂ nanoparticle shell, fabricated via sequential deposition. Under simulated solar irradiation, the TiO₂@MoS₂ heterojunction exhibited significantly enhanced uranium adsorption capacity, achieving a remarkable 97.3% photocatalytic removal efficiency within 2 h. At an initial uranium concentration of 200 ppm, the material demonstrated an exceptional extraction capacity of 976.7 mg g⁻¹, outperforming most reported photocatalysts. These findings highlight the potential of this 3D core–shell design for efficient uranium recovery and environmental purification applications. Full article

For future clean and renewable energy technology, designing highly efficient and robust electrocatalysts is of great importance. Particularly, creating efficient bifunctional electrocatalysts capable of effectively catalyzing both hydrogen- and oxygen-evolution reactions (HERs and OERs) is vital for overall water electrolysis. In this study, we employ 2D molybdenum disulfide (MoS₂) nanosheets and pyrolytically fabricated 2D graphitic carbon nitride (gC₃N₄) nanosheets to create 2D gC₃N₄-decorated 2D MoS₂ (2D–2D gC₃N₄–MoS₂) nanocomposites using a facile sonochemical method. The 2D–2D gC₃N₄–MoS₂ nanocomposites show an interconnected and agglomerated structure of 2D gC₃N₄ nanosheets decorated on 2D MoS₂ nanosheets. For water electrolysis, the gC₃N₄–MoS₂ nanocomposites exhibit low overpotentials (OER: 225 mV, HER: 156 mV), small Tafel slope values (OER: 49 mV/dec, HER: 101 mV/dec), and excellent durability (up to 100 h for both OER and HER) at 10 mA/cm² in 1 M KOH. Furthermore, the gC₃N₄–MoS₂ nanocomposites show excellent overall water electrolysis performance with a low full-cell voltage (1.52 V at 10 mA/cm²) and outstanding long-term cell stability. The superb bifunctional activities of the gC₃N₄–MoS₂ nanocomposites are attributed to the synergistic effects of 2D gC₃N₄ (i.e., low charge-transfer resistance) and 2D MoS₂ (i.e., a large electrochemically active surface area). These findings suggest that the 2D–2D gC₃N₄–MoS₂ nanocomposites could serve as excellent bifunctional catalysts for overall water electrolysis. Full article

Background: Molybdenum (Mo) is an essential trace element for animals, but too much intake can cause adverse effects. Due to the metabolic characteristics of goats and other ruminants, they are more susceptible to the cumulative effects of Mo toxicity. A high Mo intake can cause multi-organ toxicity in ruminants, but the mechanism of damage to the pancreas is still unclear. The aim of this study was to systematically analyze the key regulatory pathways of pancreatic injury induced by Mo in goats using a metabolomics approach. Methods: Twenty male Yudong Black goats (22.34 ± 1.87 kg, six months) were randomly divided into a control group (fed a basal diet) and the Mo group (fed a basal diet supplemented with 50 mg·kg⁻¹ Na₂MoO₄·2H₂O). After 60 days of continuous feeding, their pancreatic tissues were collected and the mineral elements, antioxidant capacity, and inflammatory factors were examined. Untargeted metabolomics based on HILIC UHPLC-Q-EXACTIVE MS was used to analyze changes in metabolites. The core regulatory mechanisms were revealed by KEGG enrichment analysis. Results: The results demonstrated that goats in the Mo group showed obvious clinical signs, such as lethargy, loss of appetite, and unsteady gait. The pancreatic tissue of goats in the Mo group exhibited significantly elevated levels of Mo and copper, accompanied by a marked reduction in antioxidant capacity and concurrent increases in inflammatory cytokine levels. Between the Mo group and control group, 167 differentially expressed metabolites were identified. KEGG enrichment analysis showed that it disrupted multiple metabolic pathways, including glycine, serine, and threonine metabolism, cysteine and methionine metabolism, and butanoate metabolism. Conclusions: This study mainly revealed, at the metabolomics level, that Mo exposure would disrupt the metabolic pathways related to antioxidant capacity in goat pancreata. It provides new insights into the molecular mechanisms of Mo-induced pancreatic injury in goats. Full article

This study investigates the mechanical, tribological, and electrochemical behaviour of a novel precipitation-hardenable martensitic alloy produced by selective laser melting (SLM). The alloy was specifically engineered with an optimised composition, free from cobalt and molybdenum, and featuring reduced nickel content (7 wt.%) and 8 wt.% chromium. It has been developed as a cost-effective and sustainable alternative to conventional maraging steels, while maintaining high mechanical strength and a refined microstructure tailored to the steep thermal gradients inherent to the SLM process. Several ageing heat treatments were assessed to evaluate their influence on microstructure, hardness, tensile strength, retained austenite content, dislocation density, as well as wear behaviour (pin-on-disc test) and corrosion resistance (polarisation curves in 3.5%NaCl). The results indicate that ageing at 540 °C for 2 h offers an optimal combination of hardness (550–560 HV), tensile strength (~1700 MPa), microstructural stability, and wear resistance, with a 90% improvement compared to the as-built condition. In contrast, ageing at 600 °C for 1 h enhances ductility and corrosion resistance (Rp = 462.2 kΩ; Ecorr = –111.8 mV), at the expense of a higher fraction of reverted austenite (~34%) and reduced hardness (450 HV). This study demonstrates that the mechanical, surface, and electrochemical performance of this novel SLM-produced alloy can be effectively tailored through controlled thermal treatments, offering promising opportunities for demanding applications requiring a customised balance of strength, durability, and corrosion behaviour. Full article

Severe polysulfide shuttling and sluggish redox kinetics critically hinder lithium–sulfur (Li-S) battery commercialization. In this study, a multifunctional diatomite (DE)/TiO₂/MoS₂/N-doped carbon nanofiber (NCNF) composite separator was fabricated via hydrothermal synthesis, electrospinning, and carbonization. DE provides dual polysulfide suppression, encompassing microporous confinement and electrostatic repulsion. By integrating synergistic catalytic effects from TiO₂ and MoS₂ nanoparticles, which accelerate polysulfide conversion, and conductive NCNF networks, which facilitate rapid charge transfer, this hierarchical design achieves exceptional electrochemical performance: a 1245.6 mAh g⁻¹ initial capacity at 0.5 C and 65.94% retention after 200 cycles. This work presents a rational multi-component engineering strategy to suppress shuttle effects in high-energy-density Li-S batteries. Full article

This study aimed to evaluate the effect of replacing chalk with fly ash in a two-component polyurethane (2C PU) adhesive on its physicochemical, mechanical, and environmental properties, as a practical application of circular economy principles. Six adhesive formulations were prepared, each containing a chalk-to-fly ash ratio as a filler. The study evaluated rheological, mechanical, thermal, and environmental parameters. Mechanical tests confirmed cohesive failure within the bonded material, indicating that the bond strength at the adhesive–substrate interface exceeded the internal strength of the substrate. The highest contaminant elution levels recorded were 0.62 mg/kg for molybdenum and 0.20 mg/kg for selenium, which represent only 6.2% and 40% of the regulatory limits, respectively. Dissolved organic carbon (DOC) and total dissolved solids (TDS) did not exceed 340 mg/kg and 4260 mg/kg, respectively. GC-MS analysis did not reveal the presence of prominent volatile organic compound emissions. Initial screening suggests possible compatibility with low-emission certification schemes (e.g., A+, AgBB, EMICODE^®), though confirmation requires further quantitative testing. The results demonstrate that fly ash can be an effective substitute for chalk in polyurethane adhesives, ensuring environmental compliance and maintaining functional performance while supporting the principles of the circular economy. Full article

Polyoxometalate (POM)-type supramolecular materials have unique structures and hold immense potential for development in the fields of biomedicine, information storage, and electrocatalysis. In this study, (NH₄)₃ [AlMo₆O₂₄H₆]·7H₂O was employed as a polyacid anion template, pentacyclic imidazole molecules served as organic ligands, and the moderate-temperature hydrothermal and natural evaporation methods were used in combination for the design and synthesis of two octamolybdenum-oxo cluster (homopolyacids containing molybdenum-oxygen structures as the main small-molecular structures)-based organic–inorganic hybrid compounds, [(C₃N₂H₅)(C₃N₂H₄)][(β-Mo₈O₂₆H₂)]_0.5 (1) and {Zn(C₃N₂H₄)₄}{[(γ-Mo₈O₂₆)(C₃N₂H₄)₂]_0.5}·2H₂O (2). Structural and property characterization revealed that both compounds crystallized in the P-1 space group with relatively stable three-dimensional structures under the action of hydrogen bonding. Upon temperature stimulation, the [Zn(C₃N₂H₄)₄]²⁺ cation and water molecules in 2 exhibited obvious oscillations, leading to significant dielectric anomalies at approximately 250 and 260 K when dielectric testing was conducted under heating conditions. Full article

In the present work, we design a laminated composite composed of molybdenum–rhenium alloy and silicon carbide ceramics for use in space reactors as a candidate structural material with neutron spectral shift properties. The influence of the internal microstructure on the mechanical properties is investigated by finite element simulation based on scale separation. The results of the study showed that the incorporation of gradient transition layers between the metallic and ceramic phases effectively mitigates thermally induced local stresses arising from mismatches in coefficients of thermal expansion. By optimizing the composition of the gradient transition layers, the stress distribution within the composite under operating conditions has been adjusted. As a result, the stress experienced by the alloy phase is significantly reduced, potentially extending the high-temperature creep rupture life. Full article