Search Results (163)

The regulation of calcium (Ca²⁺) homeostasis is a critical process in both plant and animal systems, involving complex interplay between various organelles and a diverse network of channels, pumps, and transporters. This review provides a concise overview of inter-organellar Ca²⁺ homeostasis, highlighting key regulators and mechanisms in plant and animal cells. We discuss the roles of key Ca²⁺ channels and transporters, including IP₃Rs, RyRs, TPCs, MCUs, TRPMLs, and P2XRs in animals, as well as their plant counterparts. Here, we explore recent innovations in structural biology and advanced microscopic techniques that have enhanced our understanding of these proteins’ structure, functions, and regulations. We examine the importance of membrane contact sites in facilitating Ca²⁺ transfer between organelles and the specific expression patterns of Ca²⁺ channels and transporters. Furthermore, we address the physiological implications of inter-organellar Ca²⁺ homeostasis and its relevance in various pathological conditions. For extended comparability, a brief excursus into bacterial intracellular Ca²⁺ homeostasis is also made. This meta-analysis aims to bridge the gap between plant and animal Ca²⁺ signaling research, identifying common themes and unique adaptations in these diverse biological systems. Full article

Noncoplanar spin textures give rise not only to unusual magnetic structures but also to emergent electromagnetic responses stemming from scalar spin chirality, such as the topological Hall effect. In this study, we theoretically investigate nonreciprocal transport phenomena induced by noncoplanar magnetic orderings through microscopic model analyses. By focusing on meron–antimeron spin textures that exhibit local scalar spin chirality while maintaining vanishing global chirality, we demonstrate that the electronic band structure becomes asymmetrically modulated, which leads to the emergence of nonreciprocal transport. The present mechanism arises purely from the noncoplanar magnetic texture itself and requires neither net magnetization nor relativistic spin–orbit coupling. We further discuss the potential relevance of our findings to the compound Gd₂PdSi₃, which has been suggested to host a meron–antimeron crystal phase at low temperatures. Full article

In this work, HNTs@ZIF-67 composites were synthesized using the in situ growth method and incorporated into 6FDA-TFMB to prepare mixed-matrix membranes (MMMs). Scanning electron microscope (SEM) and transmission electron microscope (TEM) proved that the HNTs@ZIF-67 composite not only retained the hollow structure of HNTs, but also formed a continuous ZIF-67 transport layer on the surface of HNTs. The results of gas permeability experiments showed that with the increase in HNTs@ZIF-67 incorporation, the He permeability and He/CH₄ selectivity of MMMs showed a trend of increasing first and then decreasing. When the loading is 5 wt%, the He permeability and He/CH₄ selectivity of MMMs reach 116 Barrer and 305, which are 22.11% and 79.41% higher than the pure 6FDA-TFMB membrane. The results of density functional theory (DFT) and Monte Carlo (MC) calculations reveal that He diffuses more easily inside ZIF-67, HNTs and 6FDA-TFMB than CH₄, and ZIF-67 shows larger adsorption energy with He than HNTs and 6FDA-TFMB, indicating that He is easily adsorbed by ZIF-67 in MMMs. Based on experimental and molecular simulation results, the mechanism of HNTs@ZIF-67 improving the He/CH₄ separation performance of MMMs was summarized. With the advantage of a smaller molecular kinetic diameter, He can diffuse through ZIF-67 on the tube orifice of HNTs@ZIF-67 and enter the HNTs’ hollow tube for rapid transmission. At the same time, He can also be rapidly transferred in the continuous ZIF-67 transport channel layer, which improves the He permeability and the He/CH₄ selectivity of MMMs. Full article

Long-term vibrations from metro trains can cause liquefaction of water-rich sandy soil foundations, affecting the safety of operational tunnels. However, existing liquefaction studies mainly focus on seismic loads, and the macro-meso-mechanical mechanisms of liquefaction induced by train vibration loads remain unclear, which hinders the establishment of effective liquefaction prediction and evaluation methods. To investigate the microscopic mechanisms underlying sand liquefaction caused by train-induced vibrations, this study employs PFC3D discrete element software in conjunction with laboratory experiments to analyze the microscopic parameters of the unit cell. The findings indicate that the coordination number, mechanical coordination number, porosity, contact force chains, and strain energy all decrease with increasing vibration frequency. Conversely, the pore pressure, anisotropy, and energy exhibit opposite trends, continuing until the sample reaches a state of liquefaction failure. Notably, when the dynamic stress amplitude increases or the loading frequency decreases, the rate of reduction in coordination number, mechanical coordination number, porosity, contact force chains, and strain energy becomes more pronounced. Similarly, the rate of increase in pore pressure and anisotropy is more significant under these conditions. The research findings can provide a reference for the design of metro projects and liquefaction mitigation measures, thereby enhancing the safety and reliability of urban metro transportation systems. Full article

This study systematically investigates the influence mechanism of the element Cr on the mechanical properties of the heat-affected zone in pipeline steels for supercritical CO₂ transportation. Microstructural evolution in the heat affected-zone was characterized through thermal simulation tests, Charpy impact testing (−10 °C), and microhardness measurements, complemented by multiscale microscopic analyses (optical microscopy, scanning electron microscopy, electron backscatter diffraction, and transmission electron microscopy). The results demonstrate that Cr addition enhances the base metal’s resistance to supercritical CO₂ corrosion but reduces its low-temperature impact toughness from 277 J to 235 J at −10 °C. Notably, the intercritical heat-affected zone exhibits severe embrittlement, with impact energy plummeting from 235 J (base metal) to 77 J. Microstructural analysis reveals that Cr interacts with carbon to form stable carbonitride particles, which reduce the free carbon concentration and diffusion coefficient in austenite, thereby inducing heterogeneous austenitization. Undissolved carbonitrides pin grain boundaries, creating carbon concentration gradients. During rapid cooling, these localized carbon-enriched microregions preferentially transform into core–shell-structured M-A constituent, characterized by a micro-twin containing retained austenite core encapsulated by high hardness lath martensite. The synergistic interaction between micro-twins and interfacial thermal mismatch stress induces localized stress concentration, triggering microcrack nucleation and subsequent toughness degradation. Full article

Reactive oxygen species (ROS) generated by cold atmospheric plasma (CAP) cause irreversible damage to cancer cell DNA, RNA, mitochondria, and antioxidant defense systems, leading to apoptosis. Plasma-induced disruption of the antioxidant defense system of cancer cells by cystine uptake via xC⁻ antiporter has been widely studied, while folate uptake by cancer cells via high expression of hSLC19A1, which generates Nicotinamide Adenine Dinucleotide Phosphate (NADPH) via one-carbon metabolism, is also an important component of the antioxidant defense mechanism of cancer cells. Disrupting folate transport in cancer cells is an important potential pathway for synergizing with pemetrexed (PMX) to induce apoptosis in cancer cells, which is of great research value. In this paper, classical molecular dynamics simulations were employed to study the effect of plasma oxidation of hSLC19A1 on the uptake of 5-Methyltetrahydrofolate (5-MTHF), which is the predominant dietary and circulatory folate, and the antifolate chemotherapeutic agent PMX by cancer cells. The results showed that the channel radius of hSLC19A1 for transporting 5MTHF after oxidation became narrower and the conformation tended to be closed, which was unfavorable for the transport of 5-MTHF; hydrogen bonding and hydrophobic interactions between hSLC19A1 and 5-MTHF decreased, the predicted docking affinity decreased, and the binding energy decreased from −28.023 kcal/mol to −16.866 kcal/mol, while that with PMX was stable around −28 kcal/mol, suggesting that the oxidative modification reduced the binding capacity of hSLC19A1 and 5-MTHF while barely affecting the transport of PMX, which contributed to weakening the antioxidant defense system of cancer cells and synergizing with PMX to induce apoptosis in cancer cells. Our simulations provide theoretical insights for CAP-induced apoptosis in cancer cells at the microscopic level and help promote the further development of cold atmospheric plasma in the field of cancer therapy. Full article

In recent years, underground hydrogen storage (UHS) has become a hot topic in the field of deep energy storage. Green hydrogen, produced using surplus electricity during peak production, can be injected and stored in underground reservoirs and extracted during periods of high demand. A profound understanding of the mechanisms of the gas–water two-phase flow at the pore scale is of great significance for evaluating the sealing integrity of UHS reservoirs and optimizing injection, as well as the storage space. The pore structure of rocks, as the storage space and flow channels for fluids, has a significant impact on fluid injection, production, and storage processes. This paper systematically summarizes the methods for characterizing the micro-pore structure of reservoir rocks. The applicability of different techniques was evaluated and compared. A detailed comparative analysis was made of the advantages and disadvantages of various numerical simulation methods in tracking two-phase flow interfaces, along with an assessment of their suitability. Subsequently, the microscopic visualization seepage experimental techniques, including microfluidics, NMR-based, and CT scanning-based methods, were reviewed and discussed in terms of the microscopic dynamic mechanisms of complex fluid transport behaviors. Due to the high resolution, non-contact, and non-destructive, as well as the scalable in situ high-temperature and high-pressure experimental conditions, CT scanning-based visualization technology has received increasing attention. The research presented in this paper can provide theoretical guidance for further understanding the characterization of the micro-pore structure of reservoir rocks and the mechanisms of two-phase flow at the pore scale. Full article

Particulate matter affects both the light environment and air quality in greenhouses, obstructing normal gas exchange and hindering efficient physiological activities such as photosynthesis. This study focused on young Chinese cabbage (Brassica rapa L. Chinensis Group) in a greenhouse at harvest time, monitoring and comparing hyperspectral information, net photosynthetic rate, and microscopic leaf structure under two conditions: a quantitative artificial particulate matter environment and a healthy environment. Based on microscopic results combined with spectral responses and changes in photosynthetic physiological information, it is believed that particulate matter enters plant cells through stomata. Through retention and transport pathways, it disrupts the membrane structure, organelles, and other components of plant cells, resulting in adverse effects on the plant’s physiological functions. The study analyzed the mechanisms by which particulate matter influences the photosynthesis, spectral characteristics, and physiological responses of young Chinese cabbage. Physiological Reflectance Index (PRI), Modified Chlorophyll Absorption Ratio Index (MCARI), spectral red-edge position (λr), and spectral sensitive bands were used as spectral feature variables. Through cubic polynomial and 24 combinations of spectral preprocessing and modeling methods, an inversion model of spectral features and net photosynthetic rate was established. The optimal combination of spectral preprocessing and modeling methods was finally selected as SG + SD + PLS + MSC, which consists of Savitzky-Golay smooth (SG), second derivative (SD), partial least squares (PLS), and multiplicative scatter correction (MSC). The coefficient of determination (R²) of the model is 0.9513. The results indicate that particulate matter affects plant photosynthesis. The SG + SD + PLS + MSC combination method is relatively advantageous for processing the photosynthetic spectral physiological information of plants under the influence of particulate matter. The results of this study will deepen the understanding of the mechanisms by which particulate matter affects plants and provide a reference for the physiological information inversion of greenhouse vegetables under particulate matter pollution. Full article

Sodium-glucose co-transporter 2 inhibitors (SGLT2i) preserve cardiac and renal function by mechanisms that are not completely elucidated. Among other things, SGLT2i promote nutrient-deprivation signalling, which might affect the immune function. As the fate of immune cells is controlled by their metabolism, we aimed to study the mitochondrial integrity of lymphocytes isolated from renal transplant recipients with type 2 diabetes (T2D) upon SGLT2i therapy instauration and six-month follow up. In this real-world pilot study, the mitochondrial respiration of isolated peripheral blood mononuclear cells was monitored in a Seahorse XFp extracellular-flux analyzer and cells were photographed with a confocal microscope. Mitochondrial mass, membrane potential, and superoxide content of lymphocyte subpopulations were measured by flow cytometry (MitoTracker^TM Green, TMRM, and MitoSOX^TM Red probes). Leveraging in vivo conditions of immune cells, we evaluated their metabolic profiles associated with immune activation. Herein, we identified changes in redox homeostasis with sustained membrane polarization, and an increased mitochondrial biogenesis upon PHA stimulation that significantly correlated with changes in body weight and LDL-cholesterol levels, and a resultant compensatory mitochondrial function of lymphocytes. Our data suggest novel mechanisms induced by SGLT2i to modulate immune cells, which probably underlie the observed beneficial effects in kidney transplant recipients. Nonetheless, further mechanistic studies are required to extend these exploratory findings and encourage the use of this therapeutic strategy. Full article

Background/Objectives: In vitro models play a crucial role in preclinical respiratory research, enabling the testing and screening of mucosal formulations, dosage forms, and inhaled drugs. Mucociliary clearance (MCC) is an essential defense mechanism in mucosal drug delivery but is often impaired in respiratory diseases. Despite its importance, standardized in vitro MCC assays are rarely reported. Furthermore, many published methods primarily measure cilia beat frequency (CBF), which requires high-speed cameras that are not accessible to all laboratories. Therefore, this study aimed to develop a physiologically relevant, differentiated in vitro model of the respiratory epithelium that incorporates both beating cilia and functional MCC. We chose porcine airway mucosa as an alternative to human tissue due to ethical considerations and limited availability. The established model is designed to provide a reproducible and accessible method for a broad range of research laboratories. Methods: The previously published tracheal mucosal primary cell (TMPC DS) model, derived from porcine tissue, lacked the presence of beating cilia, which are crucial for effective MCC analysis. For accurate MCC assessment, beating cilia are essential as they play a key role in mucus clearance. To address this limitation, the here-described ciliated tracheal mucosal primary cell (cTMPC) model was developed. cTMPCs were isolated from porcine tissue and cultured under air–liquid interface (ALI) conditions for 21 days to promote differentiation. This model was evaluated for cell morphology, tight junction formation, ciliated and mucus-producing cells, barrier function, gene expression, and tracer/IgG transport. MCC and the model’s suitability for standardized MCC assays were assessed using an inverted microscope. In contrast to the TMPC DS model, which lacked beating cilia and thus could not support MCC analysis, the cTMPC model allows for comprehensive MCC studies. Results: The developed differentiated in vitro model demonstrated key structural and functional features of the respiratory epithelium, including well-differentiated cell morphology, tight junction integrity, ciliated and mucus-producing cells, and effective barrier function. Functional MCC was observed, confirming the model’s potential for standardized clearance assays. Conclusions: This differentiated in vitro model closely replicates the structural and functional characteristics of in vivo airways. It provides a valuable platform for studying mucociliary clearance, toxicology, drug uptake, and evaluating mucosal formulations and dosage forms in respiratory research. Full article

Increasing the share of circulating scrap in produced castings is not only due to optimizing production costs, but also the need to protect the environment realized by reducing production energy intensity, generating less waste, mitigating greenhouse gas emissions, and consuming fewer natural resources. However, this is associated with maintaining the required properties of castings and considering the impact of impurities on the formation of the structure of aluminum alloys. This research concerns the AlSi10MnMg alloy, which introduces 50 to 75% (every 5%) of circulating scrap. This alloy is one of the most commonly used for producing gravity and pressure die-castings (HPDC), including engine parts and transport structural elements. Based on microscopic research, it was found that the increase in scrap content causes an increase in the share of iron, which results in pre-eutectic (from about 0.45 wt.% to 0.7 wt.% Fe) or even primary crystallization of iron phases (over 0.7 wt.% Fe), mainly the plate–needle phase β-Al₅FeSi. Its unfavorable morphology and size cause the formation of numerous shrinkage porosity areas, which has an impact on the reduction in mechanical properties (reduction in UTS and YS by approx. 16% and elongation by approx. 18%, compared to the AlSi10MnMg alloy with 50% scrap content). It was found that the increase in the share of recycled scrap (from 50 to 75%) can be used only when the manganese content is increased. Its effect is to change the morphology of the β-Al₅FeSi phase into α-Al₁₅(Fe,Mn)₃Si₂, whose crystallization occurs in the temperature range of 540 to 555 °C and increases slightly with increasing manganese addition. It is essential to consider the appropriate value of the Mn/Fe quotient, which should be about 1/2, because a higher value may cause the formation of a sludge factor. This work aimed to determine the limiting iron content (contained in the scrap) at which the sequence of the β-Al₅FeSi phase release (pre-eutectic or primary crystallization) changes. This sequence mainly affects the form of morphology, the dimensions of the β-Fe phase, and the proportion of shrinkage porosity. Full article

In the cold chamber high pressure die casting process (CC-HPDC) for light alloys, the piston lubricants play a key role in protecting the piston tip from wearing and ensure adequate seal with the shot sleeve. However, during the production process, the pouring of overheated aluminum alloy melt into the shot sleeve would lead to evaporation and burning of the lubricants once in contact with the piston tip. The burning products, however, would form gas and non-metallic inclusions in the melt which would be transported and injected into the die area and finally trapped in the castings, all of which would affect the mechanical properties of the as-cast samples and deteriorate the product quality. To further investigate this issue, a pilot scale HPDC machine is used and the lubricant burning issue is studied based on material characterization and numerical modelling. The chemical composition, size, and morphology of the burned products are observed using scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). In order to better explore the issue of lubricant combustion discovered in the experiment, a finite element model describing the entire HPDC process is established and the burning, motion, and trapping of the lubricant are calculated. The final distribution of the burned products such as gas and non-metallic inclusions are predicted and their influence on final solidification quality of the as-cast products under various process parameters are analyzed qualitatively. Finally, a slow shot velocity range of 0.4–0.6 m/s and an acceleration profile that ramps up to 0.3 m/s over 0–370 mm of the shot sleeve proved to be the most effective in reducing air entrainment and oxide inclusions to alleviate the burning of lubricant on final product quality. Full article

Carbon fiber composites (CFRPs) are prone to impact loads during their production, transportation, and service life. These impacts can induce microscopic damage that is always undetectable to the naked eye, thereby posing a significant safety risk to the structural integrity of CFRP structures. In this study, we developed an impact localization system for CFRP structures using extrinsic Fabry–Perot interferometric (EFPI) sensors. The impact signals detected by EFPI sensors are demodulated at high speeds using an intensity modulation method. An impact localization method for the CFRP structure based on the energy–entropy ratio endpoint detection and CNN-BIGRU-Attention is proposed. The time difference of arrival (TDOA) between signals from different EFPI sensors is collected to characterize the impact location. The attention mechanism is integrated into the CNN-BIGRU model to enhance the significance of the TDOA of impact signals detected by proximal EFPI sensors. The model is trained using the training set, with its parameters optimized using the sand cat swarm optimization algorithm and validation set. The localization performance of different models is then evaluated and compared using the test set. The impact localization system based on the CNN-BIGRU-Attention model using EFPI sensors was validated on a CFRP plate with an experimental area of 400 mm × 400 mm. The average error in impact localization is 8.14 mm, and the experimental results demonstrate the effectiveness and satisfactory performance of the proposed method. Full article

Oxide phases such as $\alpha$-Fe₂O₃ (hematite) and $\alpha$-Al₂O₃ (corundum) are highly insoluble in water; however, subcritical crack growth has been observed in humidity nonetheless. Chemically induced bond breaking at the crack tip appears unlikely due to sterically hindered molecular transport. The molecular mechanics of a crack in corundum with a reactive force field reveal minimal lattice trapping, leading to bond breaking before sufficient space opens for water transport. To address this, we model a pre-built blunt crack with space for H₂O molecule adsorption at the tip and show that it reduces fracture toughness by lowering the critical J-integral. Then, we explore stress-enhanced dissolution to understand the mechanism of crack tip blunting in the oxide/water system. Density functional theory combined with metadynamics was employed to describe atomic dissolution from flat hematite and corundum surfaces in pure water. Strain accelerates dissolution, stabilizing intermediate states with broken bonds before full atom detachment, while the free energy profile of unstrained surfaces is almost monotonic. The atomistic calculations provided input for a kinetic model, predicting the shape evolution of a blunt crack tip, which displays three distinct regimes: (i) dissolution primarily away from the tip, (ii) enhanced blunting near but not at the apex, and (iii) sharpening near the apex. The transition between regimes occurs at a low strain, highlighting the critical role of water in the subcritical crack growth of oxide scales, with dissolution as the fundamental microscopic mechanism behind this process. Full article

Aluminum 7075 alloys are widely utilized in aerospace, transportation, and marine industries due to their high strength and low density. However, further research is needed to understand their mechanical, thermomechanical, and vibrational behaviors when reinforced. This study focuses on the development of Al 7075 composites reinforced with zirconium silicate (ZrSiO₄), processed via sand stir casting. The mechanical properties, including tensile, compression, and impact strength, as well as thermomechanical and vibrational behaviors, were thoroughly investigated. A planetary ball mill was used to mix ZrSiO₄ with a wettability agent, and the results indicated that the addition of ZrSiO₄ with the wettability agent significantly enhanced the mechanical properties. Fourier Transform Infrared Spectroscopy (FTIR) was employed to identify the compounds formed after adding the reinforcement and wettability agent. Scanning Electron Microscope (SEM) images and Energy-dispersive X-ray (EDX) analysis revealed a uniform distribution of the particles within the matrix. The tensile, compression, and impact strengths increased by 20%, 21%, and 19%, respectively, with the addition of 8 wt% ZrSiO₄; however, strain decreased. Additionally, heat treatment further enhanced the mechanical properties of the composites. The thermomechanical properties showed improvement even at elevated temperatures, and the damping factor was enhanced with the addition of ZrSiO₄. The elemental composition of the reinforced composites was analyzed using EDX, confirming the presence of the reinforcement. This research highlights the potential of Al 7075-ZrSiO₄ composites for improved performance in various applications. Full article