Search Results (1,482)

This study evaluated the authenticity of olive oil in canned tuna products from the Slovenian market using both official methods, including fatty acid (FA) profiling, determination of the equivalent carbon number difference (ΔECN42), and sterol analysis, and an advanced method: stable carbon isotope analysis (δ¹³C) of FAs obtained through compound-specific isotope analysis (CSIA). Results from both methods confirmed that all 10 samples were authentic, as per the limits set by EU Regulation 2022/2104 and supported by the scientific literature. Method performance was further evaluated by adulterating the olive oil from the canned tuna with 5–20% vegetable oil (VO) or hazelnut oil (HO). While FA analysis struggled to differentiate adulterants with similar FA profiles, CSIA of FAs significantly improved detection. However, distinguishing between VO and HO blended samples remained challenging. PLS-DA analysis further supported the potential of using δ¹³C values of FA for food authentication. Storage of adulterated samples also influenced FA composition, leading to significant changes in MUFA/PUFA ratios and δ¹³C values, which became less negative, likely due to oxidative degradation. In summary, the combination of official and advanced methods, supported by chemometric analysis, offers a robust approach to ensuring the authenticity of olive oil in canned tuna. Full article

The Hida Belt in central Japan is a key geological unit for understanding the crustal growth of the Eurasian continent in the Mesozoic. However, while previous studies have focused primarily on geochronology, the geochemical characteristics of its rocks and minerals remain largely unexplored. This study investigates the geochemical characteristics and magmatic processes of the Hida granitoids, including adakitic rocks, distributed in the Unazuki and Katakaigawa areas. Whole-rock major oxides and trace elements, as well as Rb-Sr isotopes, were analyzed. Based on Rb–Sr isotopic compositions, the Hida granitoids are classified into two types. The younger and older granitoids in the Unazuki area, categorized as Type I, exhibit a narrow range of isotopic ratios, whereas the older granitoids in the Katakaigawa area, classified as Type II, display significantly higher values than those of Type I. The geochemical data suggest that the adakitic rocks in the older granitoids originated from interaction with alkali-rich melts or fluids, while those in the younger granitoids were derived from hydrous felsic magmas sourced from subducted oceanic crust. These findings provide new insights into the formation and evolution of granitic magmatism in the Hida Belt. Full article

This study focuses on the clastic reservoir in the first member of Yaojia Formation within Qijia-Gulong Sag, Songliao Basin. The results indicate that the reservoir in the study area develops within a shallow-water delta sedimentary system. The dominant sedimentary microfacies comprise underwater distributary channels, mouth bars, and sheet sands. Among these, the underwater distributary channel microfacies exhibits primary porosity ranging from 15.97% to 17.71%, showing the optimal reservoir quality, whereas the sheet sand microfacies has a porosity of only 7.45% to 12.08%, indicating inferior physical properties. During diagenesis, compaction notably decreases primary porosity via particle rearrangement and elastic deformation, while calcite cementation and quartz overgrowth further occlude pore throats. Although dissolution can generate secondary porosity (locally up to 40%), the precipitation of clay minerals tends to block pore throats, leading to “ineffective porosity” (permeability generally < 5 mD) and overall low-porosity and low-permeability characteristics. Carbon–oxygen isotope analysis reveals a deficiency in organic acid supply in the study area, restricting the intensity of dissolution alteration. Reservoir quality evolution is dominantly governed by the combined controls of sedimentary microfacies and diagenesis. This study emphasizes that, within shallow-water delta sedimentary settings, the material composition of sedimentary microfacies and the dynamic equilibrium of diagenetic processes jointly govern reservoir property variations. This insight provides critical theoretical support for understanding diagenetic evolution mechanisms in clastic reservoirs and enabling precise prediction of high-quality reservoir distribution. Full article

Cassava is the sixth most important food crop and is cultivated in more than 100 countries. The crop tolerates low soil fertility and drought, enabling it to play a role in climate adaptation strategies. Cassava generally requires careful preparation to remove toxic hydrogen cyanide (HCN) before its consumption, but HCN concentrations can vary considerably between varieties. Climate change and low inputs, particularly carbon and nutrients, affect agriculture in Pacific Island countries where cassava is commonly grown alongside traditional crops (e.g., taro). Despite increasing popularity in this region, there is limited experimental data about cassava crop management for different local varieties, their relative toxicity and nutritional value for human consumption, and their interaction with changing climate conditions. To help address this knowledge gap, three field experiments were conducted at the Koronivia Research Station of the Fiji Ministry of Agriculture. Two varieties of cassava with contrasting HCN content were planted at three different times coinciding with the start of the wet (September-October) or dry (April) seasons. A time series of measurements was conducted during the full 18-month or differing 6-month durations of each crop, based on destructive harvests and phenological observations. The former included determination of total biomass, HCN potential, carbon isotopes (δ¹³C), and elemental composition. Yield and nutritional value were significantly affected by variety and time of planting, and there were interactions between the two factors. Findings from this work will improve cassava management locally and will provide a valuable dataset for agronomic and biophysical model testing. Full article

Wild-growing edible mushrooms are known to bioaccumulate radionuclides from their environment, particularly the natural isotope potassium-40 (⁴⁰K) and anthropogenic cesium-137 (¹³⁷Cs). However, region-specific data for commercially relevant species in north-eastern Poland remain limited, despite the cultural and economic importance of mushroom foraging and export. This study aimed to assess the radiological safety of wild mushrooms intended for human consumption, with particular attention to regulatory compliance and potential exposure levels. In this study, 230 mushroom samples representing 19 wild edible species were analyzed using gamma spectrometry, alongside composite soil samples collected from corresponding foraging sites. The activity concentration of ¹³⁷Cs in mushrooms ranged from 0.94 to 159.0 Bq/kg fresh mass (f.m.), and that of ⁴⁰K from 64.4 to 150.2 Bq/kg f.m. None of the samples exceeded the regulatory limit of 1250 Bq/kg f.m. for ¹³⁷Cs. The highest estimated annual effective dose was 2.32 µSv from ¹³⁷Cs and 0.93 µSv from ⁴⁰K, with no exceedance of regulatory limits observed in any sample. A strong positive correlation was observed between ¹³⁷Cs activity in soil and mushroom dry mass (Spearman’s Rho = 0.81, p = 0.042), supporting predictable transfer patterns. Additionally, the implications of mushroom drying were assessed considering Council Regulation (Euratom) 2016/52, which mandates radionuclide levels in dried products be evaluated based on their reconstituted form. After such adjustment, even the most contaminated dried samples were found to comply with food safety limits. These findings confirm the radiological safety of wild mushrooms from north-eastern Poland and contribute novel data for a region with limited prior monitoring, in the context of current food safety regulations. Full article

The Chinese mitten crab (Eriocheir sinensis) industry is currently facing the challenges of origin fraud, as well as a lack of precision and interpretability of existing traceability methods. Here, we propose a high-precision origin traceability method based on a combination of stable isotope analysis and interpretable machine learning. We sampled Chinese mitten crabs from six origins representing diverse aquatic environments and farming practices, and analyzed their δ¹³C, δ¹⁵N, δ²H, and δ¹⁸O stable isotope compositions in different sexes and tissues (hepatopancreas, muscle, and gonad). By comparing the classification performance of Random Forest, XGBoost, and Logistic Regression models, we found that the Random Forest model outperformed the others, achieving high accuracy (91.3%) in distinguishing samples from different origins. Interpretation of the optimal Random Forest model, using SHAP (SHapley Additive exPlanations) analysis, identified δ²H in male muscle, δ¹⁵N in female hepatopancreas, and δ¹³C in female hepatopancreas as the most influential features for discriminating geographic origin. This analysis highlighted the crucial role of environmental factors, such as water source, diet, and trophic level, in origin discrimination and demonstrated that isotopic characteristics of different tissues provide unique discriminatory information. This study offers a novel paradigm for stable isotope traceability based on explainable machine learning, significantly enhancing the identification capability and reliability of Chinese mitten crab origin traceability, and holds significant implications for food safety assurance. Full article

This study presents a comprehensive case analysis of pyrite-hosted solid inclusions and their metallogenic significance in the Bainaimiao porphyry Cu deposit in NE China, which is genetically linked to the early Silurian granodiorite intrusion and porphyry dykes. Solid inclusions in pyrite from the deposit’s southern ore belt were analyzed across distinct mineralization stages. Using Electron Probe Micro-Analysis (EPMA) and in situ sulfur isotope analysis (MC-ICP-MS), inclusion assemblages in pyrite were identified, including pyrrhotite-chalcopyrite solid solutions, biotite, and dolomite. The results demonstrate that these inclusions primarily formed through coprecipitation with pyrite during crystal growth. Early-stage mineralizing fluids exhibited extreme temperatures exceeding 700 °C, coupled with low oxygen fugacity (fO₂) and low sulfur fugacity (fS₂). Sulfur isotope compositions (δ³⁴S: −5.85 to −4.97‰) indicate a dominant mantle-derived magmatic sulfur source, with contributions from reduced sulfur in sedimentary rocks. Combined with regional geological evolution, the Bainaimiao deposit is classified as a porphyry-type deposit. Its ore-forming materials were partially derived from Mesoproterozoic submarine volcanic exhalative sedimentary source beds, which were later modified and enriched by granodiorite porphyry magmatism. Full article

Diamond, a crucial carbon phase in the deep Earth, forms under ultrahigh-pressure (UHP, P > 4 GPa) conditions and serves as an important indicator mineral for the UHP environment. Based on their host rocks, diamonds are classified into mantle-derived diamonds, UHP metamorphic diamonds, impact diamonds, etc. While carbon constitutes the primary component of diamonds, nitrogen represents one of the most significant impurity elements. The study of the occurrence mode of nitrogen and the C-N isotope composition is essential for exploring the formation mechanism of diamond. Nitrogen primarily exists in diamonds as either isolated atoms (N) or aggregated forms (N2 or N4), with the dominant mode being controlled by temperature and residence time in the mantle. As temperature and residence time increase, isolated nitrogen progressively transforms into aggregated forms. As a result, mantle-derived diamonds typically contain nitrogen predominantly as N2 or N4, whereas metamorphic diamonds and impact diamonds mainly retain isolated N. Global C-N isotopic composition of over 4400 diamonds reveals a wide compositional range, with δ¹³C ranging from −38.5‰ to +5.0‰, and δ¹⁵N from −39.4‰ to +15.0‰. These values significantly exceed the typical mantle δ¹³C and δ¹⁵N values of −5‰ ± 3‰, indicating that the diamond formation may be influenced by subducted crustal materials. During crystallization, diamonds can encapsulate surrounding materials as inclusions, which are divided into three types based on their formation sequence relative to the host diamond: preformed, syngenetic, and epigenetic. Syngenetic inclusions are particularly valuable for constraining crystallization conditions and the genesis of diamonds. Furthermore, geochronology studies of radioactive isotope-bearing syngenetic inclusions are helpful to clarify the age of diamond formation. Usually, mantle-derived diamonds exhibit Archean age, whereas metamorphic diamonds are associated with subduction, showing younger ages that could be associated with metamorphic events. Therefore, the formation conditions and genesis of diamonds can be clearly constrained through integrating investigations of inclusions, nitrogen occurrence modes, and C-N isotopic compositions. The characteristics of occurrence modes, inclusions, and C-N isotope compositions of different types of diamonds are systematically reviewed in this paper, providing critical insights into their genesis and contributing to a deeper understanding of diamond formation processes in Earth’s interior. Full article

The Nanmiao Emergency Groundwater Source Area, rich in H₂SiO₃, serves as a strategic freshwater reserve zone in western Jiangxi Province. However, the mechanisms underlying groundwater formation in this area remain unclear. This study applied a combination of statistical analysis, isotopic tracing, and hydrochemical modeling to reveal the hydrochemical characteristics and origins of groundwater in the region. The results indicate that Na⁺ and Ca²⁺ dominate the cations, while HCO₃⁻ and Cl⁻ dominate the anions. Groundwater from descending springs is characterized by low mineralization and weak acidity, with hydrochemical types of primarily HCO₃–Na·Mg and HCO₃–Mg·Na·Ca. Groundwater from boreholes is weakly mineralized and neutral, with dominant hydrochemical types of HCO₃–Ca·Na and HCO₃–Ca·Na·Mg, suggesting a deep circulation hydrogeochemical process. Hydrogen and oxygen isotope analysis indicates that atmospheric precipitation is the primary recharge source. The chemical composition of groundwater is mainly controlled by rock weathering, silicate mineral dissolution, and cation exchange processes. During groundwater flowing, water and rock interactions, such as leaching, cation exchange, and mixing, occur. This study identifies the recharge sources and circulation mechanisms of regional groundwater, offering valuable insights for the sustainable development and protection of the emergency water source area. Full article

In this article, we examine water chemistry and carbonate precipitation in the alkaline waterbody Lake Van in Turkey, analyzing the possible role of microbial communities in stromatolite formation. Lake Van represents a unique environment characterized by high salinity and pH and extensive microbial communities, as revealed by SEM observation. Microbial activity, including that of cyanobacteria, can influence carbonate precipitation processes, leading to the formation of authigenic carbonates through physicochemical or metabolic mechanisms such as photosynthesis or sulfate reduction. In these environments, which are often dominated by cyanobacteria, carbonate precipitation can be influenced by biologically induced processes. This study presents new data on the hydrochemistry of lake water, focusing on the behavior of rare-earth elements (REEs) in this water and the carbon and oxygen isotopic compositions of carbonate microbial mats. The oxygen isotope data suggest that inorganic carbonate precipitation is the dominant process, but a biological influence on inorganic precipitation cannot be ruled out. For a deeper understanding of the role of biological processes in Lake Van, further studies on microbialites are needed. Full article

The Shabaosi gold field is located in the western Mohe Basin, part of the northern Great Xing’an Range, NE China, and contains multiple gold deposits. However, the sources of the ore-forming materials, the fluid evolution, and the genesis of these gold deposits have been disputed, especially regarding the classification of these deposits as either epithermal or orogenic gold systems. Based on detailed field geological investigations and previous research, we conducted systematic research on the Shabaosi, Sanshierzhan, Laogou, and Balifang gold deposits using fluid inclusion and H-O-S-Pb isotope data, with the aim of constraining the fluid properties, sources, and mineralization processes. Fluid inclusion analyses reveal diverse types, including vapor-rich, vapor–liquid, CO₂-bearing, CO₂-rich, and pure CO₂. Additionally, only a very limited number of daughter mineral-bearing fluid inclusions have been observed exclusively in the Laogou gold deposit. During the early stages, the peak temperature primarily ranged from 240 °C to 280 °C, with salinity concentrations between 6 and 8 wt% NaCl equiv., representing a medium–low temperature, low salinity, and a heterogeneous CO₂-CH₄-H₂O-NaCl system. With the influx of meteoric water, the fluids evolved gradually into a simple NaCl-H₂O system with low temperatures (160–200 °C) and salinities (4–6 wt%). The main mineralization stage exhibited peak temperatures of 220–260 °C and salinities of 5–8 wt% NaCl equiv., corresponding to an estimated formation depth of 1.4–3.3 km. The δD_V-SMOW values (−138.3‰ to −97.0‰) and δ¹⁸O_V-SMOW values (−7.1‰ to 16.2‰) indicate that the magmatic–hydrothermal fluids were progressively diluted by meteoric water during mineralization. The sulfur isotopic compositions (δ³⁴S = −0.9‰ to 1.8‰) and lead isotopic ratios (²⁰⁸Pb/²⁰⁴Pb = 38.398–38.579, ²⁰⁷Pb/²⁰⁴Pb = 15.571–15.636, and ²⁰⁶Pb/²⁰⁴Pb = 18.386–18.477) demonstrate that the gold predominantly originated from deep magmatic systems, with potential crustal contamination. Comparative analyses indicate that the Shabaosi gold field should be classified as a epizonal orogenic gold system, which shows distinct differences from epithermal gold deposits and corresponds to the extensional tectonic setting during the late-stage evolution of the Mongol–Okhotsk orogenic belt. Full article

Background: Hydroxyl and amino compounds play a significant role in defining the flavor and quality of sauce-flavor Baijiu, yet their comprehensive analysis remains challenging due to limitations in detection sensitivity. In this study, we developed a novel bromine isotope labeling approach combined with ultra-high performance liquid chromatography–high-resolution mass spectrometry (UHPLC-HRMS) to achieve high-coverage profiling of these compounds in sauce-flavor Baijiu. Methods: The method employs 5-bromonicotinoyl chloride (BrNC) for rapid (30 s) and mild (room temperature) labeling of hydroxyl and amino functional groups, utilizing bromine’s natural isotopic pattern (Δm/z = 1.998 Da) for efficient screening. Annotation was performed hierarchically at five confidence levels by integrating retention time, accurate mass, and MS/MS spectra. Results: A total of 309 hydroxyl and amino compounds, including flavor substances (e.g., tyrosol and phenethyl alcohol) and bioactive compounds (e.g., 3-phenyllactic acid), were identified in sauce-flavor Baijiu. The method exhibited excellent analytical performance, with wide linearity (1–4 orders of magnitude), precision (RSD < 18.3%), and stability (RSD < 15% over 48 h). When applied to sauce-flavor Baijiu samples of different grades, distinct compositional patterns were observed: premium-grade products showed greater metabolite diversity and higher contents of bioactive compounds, whereas lower-grade samples exhibited elevated concentrations of acidic flavor compounds. Conclusions: These results demonstrate that the established method is efficient for the comprehensive analysis of hydroxyl and amino compounds in complex food matrices. The findings provide valuable insights for quality control and flavor modulation in sauce-flavor Baijiu production. Full article

The Kaiparowits Formation preserves one of the best fossil records of Cretaceous North America, which provides great insight into the paleoecology. In an effort to investigate the paleohydrology of the Kaiparowits Formation, stable isotope compositions (δ¹³C, δ¹⁸O-carbonate, δ¹⁸O-phosphate) of 41 hadrosaur teeth, 27 crocodile teeth, and 35 turtle shell fragments were analyzed. The mean O-isotope compositions of drinking water (δ¹⁸O_w) calculated from the O-isotope of bioapatite (phosphate-δ¹⁸O_p) are −13.76 ± 2.08‰ (SMOW) for hadrosaur, −8.88 ± 2.76‰ (SMOW) for crocodile, and −10.14 ± 2.62‰ (SMOW) for turtle, which strongly reflect niche partitioning. The Kaiparowits formation does not fit the global trend in isotopic compositions of vertebrate skeletal remains from previous studies, which suggests a unique hydrological setting of the Kaiparowits basin. High-elevation runoff from the Mogollon Highlands and sea level fluctuation may have contributed to such a unique paleohydrology. Full article

The plasma in Earth’s magnetosphere is comprised of ions from the solar wind and from Earth’s polar wind, with the orientation of the interplanetary magnetic field (IMF) acting to modulate the relative contributions from these two sources. Although ion composition and charge state are strong indicators of ion provenance, here we consider isotope ratios as a possible additional method for tracing plasma provenance. Solar wind isotope ratios have been well characterized, but isotope ratios have not been measured for magnetospheric plasma, and only a few measurements have been made for Earth’s ionosphere. Accounting for diffusive separation in the ionosphere, and using a magnetospheric source flux model, we estimate isotope ratios for several light ions (H⁺, He⁺, N⁺ and O⁺) in the magnetosphere. The primary source of N and O magnetospheric ions is the polar wind, and He ions come primarily from the solar wind. H ions come from both polar and solar winds. The extreme diffusive separation of O⁺ isotopes argues against the polar wind as a significant source of O to the lunar regolith during the passage of the Moon through the magnetotail. Full article

Previous investigations into lithology-driven weathering processes have largely emphasized large-scale spatial assessments, while studies targeting small watershed scales remain scarce. This study investigated two adjacent watersheds (Chengjia: CJ; Datan: DT) under comparable climatic conditions in Guangdong, China, using hydrochemistry and stable carbon isotopes. The CJ watershed exhibited low-TDS (20–66 mg/L) HCO₃-Na·Ca-type waters dominated by silicate weathering, whereas the DT watershed displayed high-TDS (70–278 mg/L) HCO₃-Ca-type waters, indicative of mixed carbonate–silicate weathering. Results of carbon isotope composition of dissolved inorganic carbon confirmed that H₂CO₃-driven weathering was the dominant mechanism in both watersheds. In the CJ watershed, 79.5% of dissolved cations in surface water originated from silicate weathering, yielding a CO₂ consumption rate (CCR) of 0.28 × 10⁶ mol/km²/yr, while carbonate weathering was negligible. Conversely, in the DT watershed, 86.4% of dissolved cations were derived from carbonate weathering, yielding a CCR of 1.94 × 10⁶ mol/km²/yr, whereas silicate weathering contributed only 10.3% of cations with a CCR of 0.23 × 10⁶ mol/km²/yr. The chemical weathering rate of carbonate can be up to 10 times that of silicate, resulting in a larger CCR. This study demonstrated the key impact of lithology on hydrochemical characteristics and CO₂ consumption at small watershed scales. Full article