Search Results (279)

High-temperature superconductivity in strongly correlated materials is often accompanied by pseudogap behavior, strange-metal transport, strong phase fluctuations, and reduced superfluid stiffness, particularly in quasi-two-dimensional systems. These features suggest that pairing alone may not determine the onset of global superconductivity. We develop a coordination-based framework in which superconductivity is promoted by the collective organization of internal electronic degrees of freedom coupled to a carrier phase. A minimal lattice model is introduced, combining a U(1) phase sector, an internal coordination field, and an inter-sector coupling. A Landau analysis shows that internal coordination enhances the effective phase stiffness and can destabilize the incoherent state once the coordination amplitude becomes sufficiently large. Monte Carlo simulations of the model confirm that increasing coordination strength enhances phase stiffness and shifts the onset of global coherence to higher temperature. The framework provides a possible organizing interpretation of the separation between pseudogap onset and superconducting coherence, as well as the sensitivity of layered superconductors to reduced dimensionality, competing orders, and vortex-core structure. It is not intended to replace BCS theory, but to extend phase-stiffness-based descriptions to regimes where pairing, local coordination, and global phase coherence are distinct. Full article

In this work a study about the behavior of nanomaterial-based innovative transparent electrodes is presented, with a special focus on graphene, for space photovoltaic applications, in particular their transparency and the efficiency of the final device. The efficiency of a solar cell is characterized by referring to Power Conversion Efficiency and External/Internal Quantum Efficiency. Starting from the literature results, it is possible to observe that solar cells realized by innovative nanomaterial-based transparent electrodes show promising results in terms of efficiency in the Earth environment. It is known that the space environment is characterized by extreme conditions including high-energy radiation, strong temperature variations and high vacuum, which can damage materials and, consequentially, influence their performances. Among all the properties like transmittance and sheet resistance, which are the main requirements for a good transparent electrode, could change their value and, therefore, influence the efficiency of the solar cell adopting this kind of electrode. In this paper, a theoretical analysis on the effects of high-energy radiation on the transmittance of graphene layers is given, leading to the observation that in the UV frequency range, it shows a sharp fall. Moreover, the effect of temperature varying is studied by an theoretical analysis on the resistivity of the twisted graphene bilayer. It is possible to observe that, in this configuration, the system moves from a superconductor to a metal, according to temperature and twist angle. This represents a starting point to have good efficiency of solar devices in a space environment by keeping high the transparency of their electrodes. Full article

FeSe-based superconductors have become a hot topic with regard to high-temperature superconductor mechanisms and applications due to their broadly adjustable critical temperatures and the underlying rich physics. This has led to the emergence of numerous experimental approaches for regulating important critical parameters, particularly superconducting transition temperature, T_c. Owing to its powerful and effective control, electrochemical intercalation has become a widely adopted technique for tailoring the chemical and physical properties of layered materials in recent years. This short review concisely introduces FeSe-based superconductors and an electrochemical intercalation method and summarizes the research progress that has been made in utilizing this method to modulate the structure and superconductivity of FeSe-based materials. Full article

The increasing demand for electric power in hybrid electric aircraft platforms prompts the development of multi-megawatt generators featuring high specific power, compactness and intrinsic fault tolerance. Air-core machines constitute a promising solution to overcome the magnetic saturation and mass limitations of conventional iron-core designs. This paper presents a comparative electromagnetic design study of two air-core synchronous generator topologies for aircraft applications, namely a permanent magnet machine with a Halbach array rotor and an electrically excited synchronous machine featuring a high-temperature superconducting field winding. Both the generators are designed for identical output and adopt a double three-phase stator winding to enhance safety and redundancy. The Halbach array machine is used as the reference configuration representative of a technologically mature solution, whereas the superconducting generator targets high magnetic loadings by means of the superconducting excitation, to minimize the active volume. The solutions proposed in this paper are developed in the frame of a national (Italian) research project dedicated to the study of stages of multi-megawatt fault-tolerant aircraft generators. Full article

Fusion energy represents humanity’s most promising solution for achieving limitless, carbon-free power. The superconducting Tokamak has emerged as the primary pathway to realize this goal. China’s systematic multi-phase strategy, progressing from the Experimental Advanced Superconducting Tokamak (EAST) to the International Thermonuclear Experimental Reactor (ITER) partnership, and now advancing the China Fusion Engineering Demonstration Reactor (CFEDR), has catalyzed transformative innovations in fusion magnet technology, including the development of high-current-density Cable-in-Conduit Conductors (CICC) using both low-temperature superconductors (LTSs) and high temperature superconductors (HTSs), radiation-resistant ultra-low-resistance joints enabling efficient power transfer, multi-sensor quench detection systems with millisecond-level response for magnet integrity preservation, and cryogenic thermal management via multi-stage heat interception zones. This accumulated expertise in superconducting magnet technologies will accelerate the commercialization of fusion energy. Full article

High-temperature superconducting (HTS) technologies continue to advance as promising solutions for large-capacity rotating electrical machinery. However, the cryogenic architecture required to maintain superconducting states remains a critical design challenge, particularly for performance evaluation systems (PESs). Conventional helium–neon (He–Ne) circulation-based cooling enables stable low-temperature operation and has been experimentally validated in previous PES implementations, but it introduces substantial limitations due to installation complexity, flow-induced instability, and limited adaptability to different coil configurations. To address these constraints, this study proposes a conduction-cooled PES architecture optimized for HTS field coil testing and examines its thermal and structural characteristics through comprehensive design and finite element method (FEM)-based analysis. A multi-stage conduction cooling pathway using a cryocooler, thermal straps, and copper heat plates was designed to achieve uniform temperature distribution and reduce thermal gradients across the HTS winding. Three-dimensional FEM simulations were performed to evaluate the steady-state temperature distribution and heat-transfer characteristics of the proposed conduction-cooled PES under representative thermal load conditions, and the predicted cooling performance was comparatively assessed against the He–Ne cooled PES. The conduction-cooled PES was analyzed by comparing its predicted performance with previously obtained experimental results from the He–Ne cooled PES. The proposed conduction cooling architecture achieved a significant reduction in total heat load, decreasing from 177 W in the He–Ne system to approximately 78 W in the conduction-cooled configuration while also improving thermal efficiency and simplifying system integration. In addition, conduction cooling enhances compatibility with a wider range of HTS coil geometries by eliminating the constraints associated with fluid-based circulation. While the proposed conduction-cooled PES has not yet been physically fabricated, the numerical framework was established based on experimentally confirmed operating conditions of the previously implemented He–Ne-cooled PES, and future work will include fabrication and experimental validation of the conduction-cooled configuration. These findings demonstrate that conduction cooling represents a practical and scalable alternative for next-generation PES platforms and provide essential design guidelines for the development of high-field HTS coils and large-capacity superconducting rotating machines. Full article

To achieve global carbon-neutrality goals, magnetic levitation (maglev) technologies offer a promising pathway toward sustainable, energy-efficient transportation systems. In this study, a comprehensive methodology was developed to analyse and optimise the levitation performance of high-temperature superconducting (HTS) maglev systems. Several permanent magnet guideway (PMG) configurations were compared, and an optimised PMG Halbach array design was identified that enhances flux concentration and significantly improves levitation performance. To accurately model the electromagnetic interaction between the HTS bulk and the external magnetic field, finite element models based on the H-formulation were established in both two dimensions (2D) and three dimensions (3D). An HTS maglev demonstrator was built using YBCO bulks, and an experimental platform was constructed to measure levitation force. While the 2D model offers fast computation, it shows deviations from the measurements due to geometric simplifications, whereas the 3D model predicts levitation forces for the cylindrical bulk with much higher accuracy, with errors remaining below 10%. The strong agreement between experimental measurements and the 3D simulation across the entire force–height cycle confirms that the proposed model reliably reproduces the electromagnetic coupling and resulting levitation forces in HTS maglev systems. The paper provides a practical and systematic reference for the optimal design and experimental validation of HTS bulk-based maglev systems. Full article

Layered compounds containing the T₂O plane (T = transition metal), which is the anti-type of the CuO₂ plane in cuprate superconductors, have been explored widely because of their diverse physical properties. Among them, KV₂Se₂O has attracted much attention due to its interesting physical properties, especially the magnetic order. In this work, we report a new isostructural chromium oxyselenide, RbCr₂Se₂O. It was synthesized using a solid-state method using Rb₂CO₃ as the source of Rb and O for the title compound, with the assistance of Ba. The compound crystallizes in the space group P4/mmm with lattice parameters a = 4.01123(8) Å and c = 7.49357(18) Å. Magnetic susceptibility measurements indicate an antiferromagnetic transition at 345 K for RbCr₂Se₂O and also above room temperature, as the Néel temperature is T_N ≈ 400 K for KV₂Se₂O. The analysis of variable temperature XRD data reveals the anisotropic thermal expansion of the RbCr₂Se₂O lattice. The almost unchanged lattice parameter a near the transition temperature and the broad peak with an onset temperature of ~360 K in the differential scanning calorimetry data may have a relationship with the magnetic ordering. The measurement of electrical resistivity demonstrates the semiconducting behavior of RbCr₂Se₂O. The thermal activation model and variable-range hopping model are proposed to describe the conduction mechanism in the high- and low-temperature ranges, respectively. Full article

Wounded with second-generation (2G) high temperature superconductors (HTS) tapes, the conductor on round core (CORC) coil exhibits notable benefits such as low AC loss, powerful current-carrying capability, and great mechanical properties, which makes it one of the optimal materials for high magnetic field generation in the engineering applications for fusion magnets. However, it is challenging for current manufacturing techniques to ensure the uniformity among the joint resistances of HTS tapes in CORC coils. And it will have a crucial impact on the electro-magnetic properties of CORC coils. Therefore, a three-dimension (3D) finite element model of CORC coils considering joint resistance is established, and the effects of joint resistance on the coils’ current distribution and AC losses are analyzed. Results show that during AC operation, uneven joint resistances and reactance arising from the coils’ helical winding structure will act together on the current among HTS tapes, causing non-uniform current distribution and increasing the total AC losses of CORC coils. Additionally, the uneven degree of the joint resistance raises the CORC coil’s overall AC loss. Full article

Epoxy-based composites are crucial insulating and structural materials for superconducting magnets, providing mechanical strength, winding fixation, and heat transfer. However, future superconducting devices with higher integration and power will place even higher demands on their toughness, thermal conductivity, electrical insulation, and radiation resistance at low temperatures. Otherwise, problems such as cracking, detachment, and low heat dissipation efficiency will arise, which may lead to quenching of low-temperature superconductors (Nb₃Sn, NbTi) and a decline in the performance of high-temperature superconductors (YBCO). Research focuses on summarizing the recent progress in modifying epoxy resin to address these issues. The current strategies include formula optimization using mixed curing and toughening agents to enhance mechanical properties, incorporating functional fillers to improve cryogenic thermal conductivity and reduce the coefficient of thermal expansion. Studies also evaluate cryogenic electrical insulation performance (DC breakdown strength, flashover voltage) and radiation resistance under cryogenic conditions. These advancements aim to develop reliable epoxy composites, ensuring the stability and safety of superconducting magnets in applications such as particle accelerators and fusion reactors. Full article

High-temperature superconductor (HTS) magnet systems, especially those designed for fusion reactors, require effective and reliable monitoring to avoid damaging anomalies. In tokamaks, some of the magnetic coils are time-dependent, which causes strain and large inductive voltages within the magnet, rendering detection of incipient quench challenging. Ionizing radiation can also create material defects and lead to non-uniform degradation of conductors. The resulting decrease in critical current uniformity across the magnet, along with manufacturing defects, such as failure of structural materials or cooling systems, can all potentially initiate a quench. HTS magnets have a lower normal zone propagation velocity than low-temperature superconductors, and this causes normal zones to be localized, increasing the risk of permanent damage. Fiber optic sensors have several qualities that are essential in fusion systems. Unlike traditional voltage-based sensors, fiber optic cables are immune to the large electromagnetic fields present. This study presents and validates a fiber optic interrogation technique for monitoring magnetic confinement fusion and other high-temperature superconducting magnet systems. Coherent-phase optical time domain reflectometry (OTDR) allows for the high sampling rates (tens of kHz) necessary to quickly detect and mitigate quench events over the long distances required to monitor fusion magnet systems. This technique was demonstrated to successfully detect localized thermal transients at cryogenic temperatures as low as 6 K. These outcomes were also demonstrated using fibers embedded in HTS magnet coils at 77 K, verifying the potential for this interrogation technique’s use for failure detection in HTS coils. Full article

The enhancement of superconducting properties of high-temperature copper-oxide superconductors like B(P)SCCO remains a hot research topic in the field of superconducting materials. This study introduces GaP quantum dots (QDs) as a heterophase, leveraging their electroluminescent properties to enhance the superconductivity of B(P)SCCO. Experimental results demonstrate that the electroluminescence generated by GaP quantum dots (QDs) under an applied electric field induces tunable superconducting enhancement of B(P)SCCO. A reproducible trend of enhancement in the critical transition temperature (T_c) and depairing current density (J_d) is observed with increasing QD electroluminescent intensity, suggesting a positive correlation. This electroluminescence-induced enhancement dominates over the inherent impurity effects at optimal QD content. Full article

Rare-earth barium copper oxide (REBCO) high-temperature superconductors, owing to their ability to maintain high critical current density (J_c) under liquid-nitrogen-temperature and high-magnetic-field conditions, are widely regarded as one of the most promising material systems among all superconductors. This review systematically summarizes fabrication strategies for REBCO coated conductors, with a focus on pulsed laser deposition (PLD) for achieving high-quality epitaxial growth with precise composition control. To enhance in-field performance, strategies for introducing artificial pinning centers (APCs) are examined, including rare-earth element doping, substrate surface decoration, and nanoscale secondary phase incorporation. The mechanisms of vortex pinning from different dimensional defects and their synergistic effects are compared. Finally, we suggest potential future directions aimed at further enhancing the superconducting properties. Full article

The superconducting properties of YBa₂Cu₃${\mathrm{O}}_{7-\delta }$ thin films were investigated by conducting 1.7 MeV proton irradiations with a total fluence of $2.64\times {10}^{17}$${\mathrm{p}/\mathrm{cm}}^2$. The superconducting critical temperature ($T_c$) was reduced from 89.4 K to 10.1 K. The experimental procedure was similar to a previous study (0.6 MeV proton irradiation). We compared the effectiveness of $T_c$ suppression by varying the proton energy from 0.6 to 1.7 MeV and found that in general both protons of 1.7 MeV and 0.6 MeV were effective in suppressing the $T_c$ of YBCO. In particular, both results were consistent with the theoretical expectation (generalized d-wave AG theory) when a zero-temperature London penetration depth (${\lambda }_0$) = 215 nm is assumed for thin-film YBCO. For heavily irradiated cases (more than 80% $T_c$ suppression), however, 1.7 MeV protons were more effective in suppressing $T_c$ than 0.6 MeV protons. This can be understood by the fact that in the thin-film limit, higher-energy protons tend to produce less clustered point defects while lower-energy protons tend to create agglomeration of point defects. Full article

Modeling the electromagnetic (EM) behavior of CORC^® cables presents significant computational challenges due to the coexistence of thin superconducting tapes and thick structural formers. This creates a strongly multiscale problem, making traditional FEM-based approaches cumbersome, as they require extremely fine meshes to accurately resolve the different geometric scales. Integral Equation Methods (IEMs), on the other hand, are well-suited for magnetization loss analysis in multiscale superconducting structures, as they avoid modeling non-EM-active parts of the domain. This greatly reduces the effort involved in meshing the computational domain. In this work, we propose an IEM that couples surface and volumetric models to perform transient nonlinear analysis of CORC^®-like superconducting cables. Full article