Search Results (33)

Quantum dots (QDs) have drawn a lot of attention as photocatalytic materials due to the growing need for environmentally friendly wastewater treatment technologies. Among these, carbon-based QDs, including graphene oxide quantum dots (GOQDs), graphitic carbon nitride (g-C₃N₄), and carbon quantum dots (CQDs), have exceptional optical, electronic, and surface characteristics that increase their suitability for degrading pollutants when exposed to sunlight or visible light. These composites are better at transferring charges, staying stable in light, and breaking down pollutants. Metal-based QDs like ZnO and CdS also have strong photocatalytic activity, but their sustainability remains a concern due to the potential release of toxic ions when they corrode in light. The green synthesis approach addresses these challenges. Using natural extracts, like polyphenols from tea leaves, to biofunctionalize surfaces has been shown to reduce toxicity and improve photocatalytic performance. Green synthesis using renewable precursors solves problems with toxicity, resource depletion, and environmental pollution, which supports a low-impact and circular technological approach. This study examines recent developments in the making, modifying, and use of QD-based photocatalysts in the environment, with a focus on CQD/g-C₃N₄ hybrid systems. Future research should focus on making green, non-toxic, regenerable, and highly active carbon-based QDs for safe large-scale water treatment. Full article

In recent years, organic dye contamination has posed a significant threat to water safety. This study presents a novel composite photocatalyst comprising graphitic carbon nitride quantum dots (g-C3N4QDs) supported on a copper-based metal–organic framework (Cu-MOF) for efficient visible-light degradation of organic pollutants. The g-C₃N₄QDs were synthesized via a facile strategy and subsequently immobilized onto the Cu-MOF support. Comprehensive characterization including SEM, TEM, XRD, BET, UV-Vis DRS, PL, and EIS confirmed the successful formation of a heterostructure, revealing that an optimized loading of g-C₃N₄QDs significantly enhanced light absorption, facilitated charge separation, and increased the specific surface area, with the optimal composite exhibiting 273 m²/g compared to 112 m²/g for the pristine Cu-MOF. Electrochemical analyses indicated a 2.38-fold enhancement in photocurrent density and a reduced interfacial charge transfer resistance, reflecting superior electron–hole pair separation. Crucially, the optimized g-C₃N₄QDs/Cu-MOF composite demonstrated exceptional photocatalytic performance, achieving 96.6% degradation of Congo red (100 mg/L) within 30 min under visible light irradiation, substantially outperforming the 77.6% degradation attained by the pristine Cu-MOF. This enhancement is attributed to the synergistic effects of improved light harvesting, efficient interfacial charge transfer across the heterojunction, and an enlarged active surface area. The composite exhibits considerable potential as a high-performance and stable photocatalyst for purifying dye-contaminated wastewater. Full article

Alzheimer’s disease (AD) requires early and accurate identification of affected brain regions, which can be achieved through the detection of specific biomarkers to enable timely intervention. Carbon nanomaterials (CNMs), including graphene derivatives, carbon nanotubes, graphitic carbon nitride, carbon black, fullerenes, and carbon dots, offer high conductivity, large electroactive surface area, and versatile surface chemistry that enhance biosensor performance. While such properties benefit a wide range of transduction principles (e.g., electrochemical, optical, and plasmonic), this review focuses on their role in electrochemical biosensors. This review summarizes CNM-based electrochemical platforms reported from 2020 to mid-2025, employing aptamers, antibodies, and molecularly imprinted polymers for AD biomarker detection. Covered topics include fabrication strategies, transduction formats, analytical performance in complex matrices, and validation. Reported devices achieve limits of detection from the femtomolar to picogram per milliliter range, with linear ranges typically spanning 2–3 orders of magnitude (e.g., from femtomolar to picomolar, or from picogram to nanogram per milliliter levels). They exhibit high selectivity against common interferents such as BSA, glucose, uric acid, ascorbic acid, dopamine, and non-target peptides, along with growing capabilities for multiplexing and portable operation. Remaining challenges include complex fabrication, limited long-term stability and reproducibility data, scarce clinical cohort testing, and sustainability issues. Opportunities for scalable production and integration into point-of-care workflows are outlined. Full article

In this work, we developed a highly sensitive and reproducible electrochemiluminescent sensor based on a heterostructure of cadmium selenide quantum dots capped with 3-mercaptopropionic acid (MPA) + 3-morpholinoethanesulfonic acid (MES) (QDs CdSe) and carbon nitride nanosheets (g-C₃N₄) for the detection of H₂O₂ in lyophilized serum samples. To enhance the sensor sensitivity, g-C₃N₄ nanosheets were utilized as a platform to immobilize the QDs CdSe. An exhaustive characterization of the heterostructure was conducted, elucidating the interaction mechanism between QDs CdSe and g-C₃N₄. It was revealed that g-C₃N₄ acts as a hole (h⁺) donor, while QDs CdSe act as energy acceptors in a resonance energy transfer process, with the electrochemiluminescence emission originating from the QDs CdSe. The electrochemiluminescence intensity decreases in the presence of H₂O₂ due to the deactivation of the excited states of the QDs CdSe. This electrochemiluminescent sensor demonstrates exceptional performance for detecting H₂O₂ in aqueous systems, achieving a remarkably low limit of detection (LOD) of 1.81 nM, which is more sensitive than most reported sensors to detect H₂O₂. The applicability of the sensor was successfully tested where sub-µM levels of H₂O₂ were accurately quantified. These results highlight the potential of this electrochemiluminescent sensor as a reliable and pre-treatment-free tool for H₂O₂ detection in biochemical studies and human health applications. Full article

Ternary g-C₃N₄/CQD/Ag photocatalysts were synthesized via deposition of carbon quantum dots (CQDs) and silver nanoparticles (Ag) onto graphitic carbon nitride (g-C₃N₄) for efficient acetaminophen degradation. The nanocomposites exhibited enhanced photoresponse and broad-spectrum photocatalytic activity under both UV (254 nm, 250 W) and Xenon (>420 nm, 500 W) irradiation. Characterization by XRD, FTIR, SEM, PL, and EDX elucidated the material’s composition, structure, morphology, and optical properties. Optimized photocatalytic degradation of acetaminophen (50 mg/L) was achieved at pH 7 with 0.6 g/L catalyst loading and 60 min irradiation, yielding degradation efficiencies of 87.5% (UV) and 85.3% (Xenon). Radical quenching experiments and GC-MS analysis identified hydroxyl radicals as the primary reactive species and revealed a gradual decrease in intermediate toxicity during mineralization. This study demonstrates the superior photocatalytic performance of the ternary g-C₃N₄/CQD/Ag nanocomposites compared to binary systems for effective acetaminophen removal. Full article

The development of advanced functional composite materials for degrading industrial pollutants and achieving photocatalytic hydrogen (H₂) production using abundant solar energy is pivotal in new and renewable energy research. This study presents the synthesis of a nanostructure comprising SnO₂ quantum dots (QDs) randomly dispersed on the surface of graphitic carbon nitride (C₃N₄) nanosheets (Sn-C₃N₄), achieved through the thermal decomposition of melamine and a tin precursor. The synthesized materials were extensively characterized using various analytical techniques, with HRTEM analysis confirming the strong interaction between SnO₂ QDs and C₃N₄. The influence of SnO₂ QDs on the nanocomposite’s photocatalytic performance was evaluated, particularly regarding H₂ production and the degradation of crystal violet (CV) dye under simulated solar-light irradiation. The SnO₂-loaded C₃N₄ nanostructure exhibited a marked enhancement in photocatalytic activity, attributed to the synergistic effects of the quantum-sized SnO₂ nanoparticles. The optimized photocatalyst, 3-Sn-C₃N₄, demonstrated superior photocatalytic efficiency, achieving 95% degradation of CV dye within 45 min under simulated sunlight, significantly outperforming bare C₃N₄. Furthermore, the 3-Sn-C₃N₄ nanostructure attained the highest H₂ yield of 1305.4 μmol/h/g, a 4.6-fold increase compared with bare C₃N₄ (281 μmol/h/g). Enhanced photocatalytic performance was corroborated by photocurrent and EIS studies, which highlighted reduced charge carrier recombination as a critical factor in the improved activity. The underlying photocatalytic mechanisms were also examined. Full article

Due to a rise in industrial pollutants in modern life, the climate and energy crisis have grown more widespread. One of the best ways to deal with dye degradation, hydrogen production, and carbon dioxide reduction issues is the photocatalytic technique. Among various methods, catalytic technology has demonstrated tremendous promise in recent years as a cheap, sustainable, and environmentally benign technology. The expeditious establishment of carbon-based metal nanoparticles as catalysts in the disciplines of materials and chemical engineering for catalytic applications triggered by visible light is largely attributed to their advancement. There have been many wonderful catalysts created, but there are still many obstacles to overcome, which include the cost of catalysts being reduced and their effectiveness being increased. Carbon-based materials exhibit a unique combination of characteristics that make them ideal catalysts for various reaction types. These characteristics include an exceptional electrical conductivity, well-defined structures at the nanoscale, inherent water repellency, and the ability to tailor surface properties for specific applications. This versatility allows them to be effective in diverse catalytic processes, encompassing organic transformations and photocatalysis. The emergence of carbon-based nanostructured materials, including fullerenes, carbon dots, carbon nanotubes, graphitic carbon nitride, and graphene, presents a promising alternative to conventional catalysts. This review focuses on the diverse functionalities of these materials within the realm of catalysis materials for degradation, hydrogen production, and carbon dioxide reduction. Additionally, it explores the potential for their commercialization, delving into the underlying mechanisms and key factors that influence their performance. It is anticipated that this review will spur more research to develop high-performance carbon-based materials for environmental applications. Full article

Nitrobenzene (NB) is one of the nitro-aromatic compounds that is extensively used in various chemical industries. Despite its potential applications, NB is considered to be a toxic compound that has significant hazardous effects on human health and the environment. Thus, it can be said that the NB level should be monitored to avoid its negative impacts on human health. In this vein, the electrochemical method has emerged as one of the most efficient sensing techniques for the determination of NB. The sensing performance of the electrochemical techniques depends on the electro-catalytic properties and conductivity of the electrode materials. In the past few years, various electrode materials, such as conductive metal ions, semiconducting metal oxides, metal–organic frameworks, and two-dimensional (2D) materials, have been used as the electrode material for the construction of the NB sensor. Thus, it is worth summarizing previous studies on the design and synthesis of electrode materials for the construction of the NB sensor. In this mini-review article, we summarize the previous reports on the synthesis of various advanced electrode materials, such as platinum (Pt) nanoparticles (NPs), silver (Ag) NPs, carbon dots (CDs), graphene, graphitic carbon nitride (g-C₃N₄), zinc stannate (ZnSnO₃), cerium oxide (CeO₂), zinc oxide (ZnO), and so on. Furthermore, the impacts of different electrode materials are systematically discussed for the sensing of NB. The advantages of, limitations of, and future perspectives on the construction of NB sensors are discussed. The aim of the present mini-review article is to enhance the knowledge and overall literature, working towards the construction of NB sensors. Full article

Photocatalysis is one of the effective ways to degrade pollutant antibiotics. Agar is used as the adsorption module to provide abundant pore structure. Carbon dots (CDs) are selected as light energy conversion components. Graphitic carbon nitride (g-C₃N₄) is used as the main material of the catalyst. Agar/CDs/g-C₃N₄-functionalized aerogel with a unique 3D pore structure is assembled. The Agar/CDs/g-C₃N₄ aerogel shows the highest photocurrent density, which is 3.7 times that of agar, 2.4 times that of 3-g-C₃N₄ and 1.6 times that of Agar/g-C₃N₄ aerogel. Compared with 3-g-C₃N₄ and Agar/g-C₃N₄ aerogel, which can completely remove AMX after 75 min, Agar/CDs/g-C₃N₄ aerogel can degrade amoxicillin (AMX) completely after 45 min of illumination. The reason is that Agar/CDs/g-C₃N₄ aerogel has a larger specific surface area, richer functional groups, a wider spectral range, higher photocurrent density and better carrier migration and separation efficiency. It is a good strategy with which to combine the effects of each component in the ternary system for the efficient photocatalysis of organic pollutants. Full article

In this study, the author improved and modified g-C₃N₄ by doping it with the metals Ag and Cu, which changed the photochemical properties of g-C₃N₄, narrowed the band gap, and improved the photocatalytic performance regarding quantum efficiency. Organic hydrocarbons such as 1,2-dichloroethane (DCE) are very stable prepared materials produced as intermediates to obtain polyvinyl chloride, and the prepared photo-catalyst is an innovative method for extreme decomposition of chlorinated hydrocarbons. However, some significant results were obtained using different analysis techniques. X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) showed that the addition of Ag and Cu-NPS partially altered the structure of pure graphitic carbon nitride (g-C₃N₄-Pure). Scanning electron microscopy (TEM) analysis revealed that the morphological features of Ag-Cu/g-C₃N₄ contain quantum dots of Ag and Cu nanoparticles in addition to 2d-g-C₃N₄. The better separation of the photo-generated charge carriers is attributed to better photoactivity in the case of 0.3 g Ag-Cu/g-C₃N₄ with a reaction time of less than 30 min. Furthermore, the Ag-Cu/g-C₃N₄ recycling experiment showed that the catalyst remained stable after three stages of the pyrolysis experimental cycle. Another clear indicator of DCE degradation is the measurement using the titration of the Cl ions released by the decomposition. Full article

Modern industrialization has unleashed unprecedented environmental challenges, primarily in the form of pollution. In response to these pressing issues, the quest for innovative and sustainable solutions has intensified. Photocatalysis, with its unique capabilities, has emerged as a potent technology to combat the adverse effects of industrialization on the environment. This review highlights recent advances in harnessing photocatalysis to address environmental pollution. Photocatalysis offers a multifaceted approach, utilizing solar energy for catalytic reactions and enabling efficient pollutant removal. Quantum dots and graphitic carbon nitride (g-C₃N₄) are essential elements in this science. In contrast to quantum dots, which have enormous potential due to their size-dependent bandgap tunability and effective charge carrier production, g-C₃N₄ has properties like chemical stability and a configurable bandgap that make it a versatile material for photocatalysis. In this review, we explore recent achievements in integrating metal oxide quantum dots with g-C₃N₄, forming nanocomposites with superior photocatalytic activity. These nanocomposites exhibit extended light absorption ranges and enhanced charge separation efficiency, positioning them at the forefront of diverse photocatalytic applications. In conclusion, this comprehensive review underscores the critical role of photocatalysis as a potent tool to counteract the adverse environmental effects of modern industrialization. By emphasizing recent advancements in g-C₃N₄ and quantum dots and highlighting the advantages of metal oxide quantum dots decorated/integrated with g-C₃N₄ nanocomposites, this work contributes to the evolving landscape of sustainable solutions for environmental remediation and pollution control. These innovations hold promise for a cleaner and more sustainable future. Full article

A molecular imprinted electrochemical sensor based on boron-functionalized graphitic carbon nitride (B-g-C₃N₄) and graphene quantum dots (GQDs) was presented for selective determination of bisphenol A (BPA). In particular, by combining the selectivity and high stability properties, which are the most important advantages of molecular imprinted polymers, and the highly sensitive properties of GQDs/B-g-C₃N₄ nanocomposite, a highly selective and sensitive analytical method was developed for BPA analysis. Firstly, GQDs/B-g-C₃N₄ nanocomposite was characterized by using microscopic, spectroscopic, and electrochemical techniques. This novel molecular imprinted electrochemical sensor for BPA detection demonstrated a linearity of 1.0 × 10⁻¹¹–1.0 × 10⁻⁹ M and a low detection limit (LOD, 3.0 × 10⁻¹² M). BPA-imprinted polymer on GQDs/B-g-C₃N₄ nanocomposite also showed good stability, repeatability and selectivity in food samples. Full article

In this paper, a novel phosphorus-doped sulfur quantum dots (P-SQDs) material was prepared using a simple hydrothermal method. P-SQDs have a narrow particle size distribution as well as an excellent electron transfer rate and optical properties. Compositing P-SQDs with graphitic carbon nitride (g-C₃N₄) can be used for photocatalytic degradation of organic dyes under visible light. More active sites, a narrower band gap, and stronger photocurrent are obtained after introducing P-SQDs into g-C₃N₄, thus promoting its photocatalytic efficiency by as much as 3.9 times. The excellent photocatalytic activity and reusability of P-SQDs/g-C₃N₄ are prospective signs of its photocatalytic application under visible light. Full article

In this study nitrogen-doped carbon quantum dots/graphitic carbon nitride nanosheet (CNQD) composites with different contents of nitrogen-doped carbon quantum dots (NCQDs; 2, 4, 6, and 8 wt%) were synthesized. The morphological, physicochemical, and photoelectrochemical properties were investigated using complementary methods such as scanning electron microscopy (SEM), powder X-ray diffraction (pXRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), UV/Vis spectroscopy in diffuse reflectance (DRS), photoluminescence (PL), nitrogen physisorption (BET), photocurrent response, and electrochemical impedance spectroscopy (EIS). The photocatalytic activity of the synthesized materials was assessed during diclofenac (DCF) degradation in an aqueous solution under visible light irradiation. As a result, improved photocatalytic efficiency in DCF degradation was observed for all the CNQD composites compared with bulk graphitic carbon nitride (bCN) and nanosheet g-C₃N₄ (CNS). The fastest DCF degradation was observed for the 6 wt% NCQD on the surface of CNS (CNQD-6), which removed 62% of DCF in 3 h, with an associated k value of 5.41 × 10⁻³ min⁻¹. The performance test results confirmed the contribution of NCQDs to enhancing photocatalytic activity, leading to an improvement factor of 1.24 over bCN. The morphology of the CNS and the synergistic interaction between NCQDs and CNS were essential elements for enhancing photocatalytic activity. The photoelectrochemical data and photoluminescence analyses showed the efficient migration of photoexcited electrons from NCQDs to the CNS. The reduced charge recombination rates in CNQD photocatalysts might be due to the synergistic interaction between NCQDs and CNS and the unique up-conversion photoluminescence properties of NCQDs. Further investigations revealed that the photogenerated superoxide radicals (•O₂⁻) predominated in the degradation of DCF, and this photocatalyst had good reusability and toxicity reduction abilities. This work provides insight into the effects of NCQDs on the CNS surface to enhance its potential to remove emerging organic pollutants from water and wastewater. Full article

Electrochemical sensors consisting of screen-printed electrodes (SPEs) are recurrent devices in the recent literature for applications in different fields of interest and contribute to the expanding electroanalytical chemistry field. This is due to inherent characteristics that can be better (or only) achieved with the use of SPEs, including miniaturization, cost reduction, lower sample consumption, compatibility with portable equipment, and disposability. SPEs are also quite versatile; they can be manufactured using different formulations of conductive inks and substrates, and are of varied designs. Naturally, the analytical performance of SPEs is directly affected by the quality of the material used for printing and modifying the electrodes. In this sense, the most varied carbon nanomaterials have been explored for the preparation and modification of SPEs, providing devices with an enhanced electrochemical response and greater sensitivity, in addition to functionalized surfaces that can immobilize biological agents for the manufacture of biosensors. Considering the relevance and timeliness of the topic, this review aimed to provide an overview of the current scenario of the use of carbonaceous nanomaterials in the context of making electrochemical SPE sensors, from which different approaches will be presented, exploring materials traditionally investigated in electrochemistry, such as graphene, carbon nanotubes, carbon black, and those more recently investigated for this (carbon quantum dots, graphitic carbon nitride, and biochar). Perspectives on the use and expansion of these devices are also considered. Full article