Search Results (778)

This study aimed to compare the performance of three hydroxyapatite–β-tricalcium phosphate (HA–β-TCP) collagen composite grafts in a canine model for extraction socket preservation. Eight mongrel dogs underwent atraumatic bilateral mandibular premolar extraction, and sockets were randomly grafted with HBC28 (20% high-crystalline HA, 80% β-TCP bovine collagen), HBC37 (30% HA, 70% β-TCP, bovine collagen), or HPC64 (60% HA, 40% β-TCP, porcine collagen). Grafts differed in their HA–β-TCP ratio and collagen origin and content. Animals were sacrificed at 4 and 12 weeks, and the healing sites were evaluated using micro-computed tomography (micro-CT) and histological analysis. At 12 weeks, all groups showed good socket maintenance with comparable new bone formation. However, histological analysis revealed that HBC28 had significantly higher residual graft volume, while HPC64 demonstrated more extensive graft resorption. Histomorphometric analysis confirmed these findings, with statistically significant differences in residual graft area and bone volume fraction. No inflammatory response or adverse tissue reactions were observed in any group. These results suggest that all three HA–β-TCP collagen composites are biocompatible and suitable for socket preservation, with varying resorption kinetics influenced by graft composition. Selection of graft material may thus be guided by the desired rate of replacement by new bone. Full article

Cucumbers (Cucumis sativus L.) are highly sensitive to cold, but grafting onto cold-tolerant rootstocks can enhance their low-temperature resilience. This study investigates the physiological and molecular mechanisms by which exogenous vitamin C (Vc) mitigates cold stress in grafted cucumber seedlings. Using cucumber ‘Chiyu 505’ as the scion and pumpkin ‘Chuangfan No.1’ as the rootstock, seedlings were grafted using the whip grafting method. In the third true leaf expansion stage, seedlings were foliar sprayed with Vc at concentrations of 50, 100, 150, and 200 mg L⁻¹. Three days after initial spraying, seedlings were subjected to cold stress (8 °C) for 3 days, with continued spraying. After that, morphological and physiological parameters were assessed. Results showed that 150 mg L⁻¹ Vc treatment was most impactive, significantly reducing the cold damage index while increasing the root-to-shoot ratio, root vitality, chlorophyll content, and activities of antioxidant enzymes (SOD, POD, CAT). Moreover, this treatment enhanced levels of soluble sugars, soluble proteins, and proline compared to control. However, 200 mg L⁻¹ treatment elevated malondialdehyde (MDA) content, indicating potential oxidative stress. For transcriptomic analysis, leaves from the 150 mg L⁻¹ Vc and CK treatments were sampled at 0, 1, 2, and 3 days of cold stress. Differential gene expression revealed that genes associated with photosynthesis (LHCA1), stress signal transduction (MYC2-1, MYC2-2, WRKY22, WRKY2), and antioxidant defense (SOD-1, SOD-2) were initially up-regulated and subsequently down-regulated, as validated by qRT-PCR. Overall, we found that the application of 150 mg L⁻¹ Vc enhanced cold tolerance in grafted cucumber seedlings by modulating gene expression networks related to photosynthesis, stress response, and the antioxidant defense system. This study provides a way for developing Vc biostimulants to enhance cold tolerance in grafted cucumbers, improving sustainable cultivation in low-temperature regions. Full article

Background/Objectives. Efficient nucleic acid delivery into target cells remains a critical challenge in gene therapy. Due to its advantages in biocompatibility and safety, recent research has increasingly focused on non-viral gene delivery. Methods. A series of copolymers—synthesized by integrating thermally sensitive poly(N-isopropylacrylamide) (PNIPAm), hydrophilic poly(ethylene glycol) (PEG) grafts, and a polycationic poly(L-lysine) (PLL) block of varying lengths ((PNIPAm)₇₇-graft-(PEG)₉-block-(PLL)_z, z = 10–65)—were investigated. Plasmid DNA complexation with the copolymers was achieved through temperature-modulated methods. The resulting polyplexes were characterized by evaluating complex strength, particle size, zeta potential, plasmid DNA loading capacity, resistance to anionic stress, stability in serum, and lysosomal membrane destabilization assay. The copolymers’ potential for plasmid DNA delivery was assessed through cytotoxicity and transfection studies in cancer cell lines. Results. Across all complexation methods, the copolymers effectively condensed plasmid DNA into stable polyplexes. Particle sizes (60–90 nm) ranged with no apparent correlation to copolymer type, complexation method, or N/P ratio, whereas zeta potentials (+10–+20 mV) and resistance to polyanionic stress were dependent on the PLL length and N/P ratio. Cytotoxicity analysis revealed a direct correlation between PLL chain length and cell viability, with all copolymers demonstrating minimal cytotoxicity at concentrations required for efficient transfection. PNL-20 ((PNIPAm)₇₇-graft-(PEG)₉-block-(PLL)₂₀) exhibited the highest transfection efficiency among the tested formulations while maintaining low cytotoxicity. Conclusions. The study highlights the promising potential of (PNIPAm)₇₇-graft-(PEG)₉-block-(PLL)_z copolymers for effective plasmid DNA delivery to cancer cells. It reveals the importance of attaining the right balance between polyplex tightness and plasmid release to achieve improved biocompatibility and transfection efficiency. Full article

Hydrogel is widely used as a scaffolding material for tissue engineering due to its excellent cytocompatibility and potential for biofunctionalization. However, its poor mechanical property limits its further application. Fabrication of fiber-reinforced hydrogel composite scaffolds has emerged as a solution to overcome this problem. However, existing strategies usually produce nonporous composite scaffolds, where the interfiber pores are completely filled with hydrogel. This design can hinder oxygen and nutrient exchange between seeded cells and the culture medium, thereby limiting cell invasion and colonization within the scaffold. In this study, sodium alginate (SA) hydrogel was exclusively grafted onto the surface of the constituent fibers of the melt electrowritten scaffold while preserving the porous structure. The grafted hydrogel amount and pore size were precisely controlled by adjusting the SA concentration and the crosslinking ratio (SA: CaCl₂). Experimental results demonstrated that the porous composite scaffolds exhibited superior swelling capacity, degradation ratio, mechanical properties, and biocompatibility. Notably, at an SA concentration of 0.5% and a crosslinking ratio of 2:1, the porous composite scaffold achieved optimal cell adhesion and viability. This study highlights the critical importance of preserving porous structures in composite scaffolds for tissue-engineering applications. Full article

Background: While timely blood transfusion is critical for restoring oxygen-carrying capacity after coronary artery bypass grafting (CABG), allogeneic blood product transfusions are independently associated with increased long-term mortality, necessitating a risk-stratified approach to balance oxygen delivery against immunological complications and infection risks. Methods: We retrospectively analyzed 3376 patients undergoing isolated CABG between 2005 and 2023 at a single tertiary center. Patients who died during their perioperative hospital stay within 30 days were excluded. Transfusion burden was assessed both as the absolute number of blood product units (packed red blood cells, platelet transfusion, fresh frozen plasma) and as a percentage of calculated patient blood volume. The primary outcome was all-cause mortality at 5 years. Flexible Cox regression with penalized smoothing splines, adjusted for EuroSCORE II, was used to model dose–response relationships. Results: From our cohort of 3376 patients, a total of 137 patients (4.05%) received >10 units of packed red blood cells (PRBC) perioperatively. These patients were older (median 71 vs. 68 years, p < 0.001), more often female (29% vs. 15%, p < 0.001), and had higher preoperative risk (EuroSCORE II: 2.53 vs. 1.41, p < 0.001). After 5 years, mortality was 42% in the massive transfusion group versus 10% in controls. Spline regression revealed an exponential increase in mortality with transfused units: 14 units yielded a 1.5-fold higher hazard of death (HR 1.46, 95% CI 1.31–1.64), rising to HR 2.71 (95% CI 2.12–3.47) at 30 units. When transfusion was indexed to blood volume, this relationship became linear and more tightly correlated with mortality, with lower maximum hazard ratios and narrower confidence intervals. Conclusions: Indexing transfusion burden to the percentage of patient blood volume replaced provides a more accurate and clinically actionable predictor of 5-year mortality after CABG than absolute unit counts. Our findings support a shift toward individualized, volume-based transfusion strategies to optimize patient outcomes and resource stewardship in a time of limited availability of blood products. Full article

To rationally utilize and develop agricultural waste products, this research involved the synthesis of degradable high water-absorbing resin through the graft copolymerization of cotton straw (CS) with monomers. Among them, acrylic acid (AA) and acrylamide (Am) are used as grafting copolymer monomers, cellulose in the straw serves as the network framework, and MBA acts as the crosslinking agent. ⁶⁰Co gamma rays as initiators. Different concentrations of alkaline solution were used to dissolve the cellulose in the straw. Single-factor and orthogonal experiments were conducted to optimize the experimental conditions. various analytical methods such as thermogravimetric analysis (TG), X-ray crystallography (XRD), infrared spectroscopy (IR), and scanning electron microscopy (SEM) were employed to characterize the structure and properties of the product. ⁶⁰Co gamma rays as initiators, can reduce the pollution caused by chemical initiators and lower energy consumption. Through this research, agricultural waste can be effectively utilized, reducing environmental pollution, lowering industrial energy consumption, and synthesizing degradable and environmentally friendly high-absorbent resins. The product can be applied to agricultural water retention agent, fertilizer controlled release agent and other aspects. Full article

Background: Several epidemiological studies have indicated that metabolic syndrome (MetS) after renal transplantation is caused by an accumulation of non-immunological risks of renal transplantation, and affects the prognosis of the kidney and the patient by increasing the risk of arteriosclerosis and cardiovascular complications. The incidence of MetS in Japanese renal transplant recipients is 14.9 to 23.8%, but its effects on cardiovascular events and kidney prognosis are not clear. Here, we report the results of a longitudinal study on MetS in renal transplant recipients. Methods: A retrospective cohort study was conducted in 104 stable renal transplant recipients who attended our outpatient department from January 2006 to June 2007 and were diagnosed with MetS at least 6 months after renal transplantation until 31 December 2020, or did not have MetS. The impact of MetS on composite vascular events was examined using multivariate Cox proportional hazards analysis. Results: The hazard ratios for the impact of MetS on composite vascular events diagnosed by NCEP Japan, NCEP Original, NCEP Asia, and IDF criteria on composite vascular events were 2.78 (95% CI: 1.15 to 6.75, p = 0.024), 2.65 (95% CI: 1.04 to 6.80, p = 0.042), 2.37 (95% CI: 0.93 to 6.01, p = 0.070), and 1.91 (95% CI: 0.77 to 4.75, p = 0.164), respectively. P for interaction was used to test the influence of each indicator, but was not statistically significant. Conclusions: MetS is a robust risk factor for graft loss and development of cardiovascular events in Japanese renal transplant recipients, even during long-term follow-up. This finding emphasizes the importance of monitoring and managing MetS in this population to improve long-term outcomes. Full article

Background: Sternal wound infections (SWIs) remain a significant complication following cardiac surgery. Inflammatory and nutritional status are increasingly recognized as key contributors to their development. This study aimed to investigate the predictive utility of immunonutritional biomarkers and to evaluate the protective effect of combining sternal irrigation with an antibiotic-impregnated membrane. Methods: This retrospective cohort study included 480 patients undergoing off-pump coronary artery bypass grafting. Patients were categorized based on sternal management strategy (standard closure or local prophylaxis using gentamicin-enriched irrigation combined with an antibiotic-impregnated fascia lata membrane) and according to the severity of SWIs, classified as superficial or deep. Inflammatory and nutritional markers—including C-reactive protein (CRP), neutrophils, lymphocytes, albumin, neutrophil-to-lymphocyte ratio (NLR), C-reactive protein-to-albumin ratio (CAR), and prognostic nutritional index (PNI)—were assessed at three time points: preoperatively, on postoperative day 3, and after week 1. Results: SWIs were observed in 93 patients, including 75 superficial and 18 deep infections. The combined prophylactic approach was associated with a nearly 1.8-fold reduction in deep SWIs (OR: 0.55; 95% CI: 0.15–0.87) and a modest reduction in superficial infections (OR: 0.89; 95% CI: 0.5–1.3; p = 0.061). Threshold values of 3.75 for preoperative NLR, 9.8 for ΔNLR, and 16.7 for ΔCAR demonstrated strong predictive capacity for identifying patients at increased risk of developing deep SWIs. Patients receiving local prophylaxis exhibited significantly lower CRP, NLR, and CAR values and higher PNI levels at all time points. Conclusions: The combination of sternal irrigation and local antibiotic prophylaxis appears to confer protection against SWIs, potentially by mitigating postoperative inflammation. Immunonutritional biomarkers offer a promising means for early risk stratification. To confirm their clinical utility and broader applicability, these results should be validated in prospective, multicenter studies encompassing a wider range of cardiac surgical procedures. Full article

Carbon dots (CDs), a class of carbon-based fluorescent nanomaterials, have garnered significant attention due to their tunable optical properties and functional versatility. In this study, we developed a hybrid material by grafting pH- and temperature-responsive copolymers onto CDs via reversible addition-fragmentation chain-transfer (RAFT) polymerization. Triamino-tetraphenylethylene (ATPE) and N-isopropylacrylamide (NIPAM) were copolymerized at varying ratios and covalently linked to CDs, forming a dual-responsive system. Structural characterization using FTIR, ¹H NMR, and TEM confirmed the successful grafting of the copolymers onto CDs. The hybrid material exhibited pH-dependent fluorescence changes in acidic aqueous solutions, with emission shifting from 450 nm (attributed to CDs) to 500 nm (aggregation-induced emission, AIE, from ATPE) above a critical pH threshold. Solid films of the hybrid material demonstrated reversible fluorescence quenching under HCl vapor and recovery/enhancement under NH₃ vapor, showing excellent fatigue resistance over multiple cycles. Temperature responsiveness was attributed to the thermosensitive poly(NIPAM) segments, with fluorescence intensity increasing above 35 °C due to polymer chain collapse and ATPE aggregation. This work provides a strategy for designing multifunctional hybrid materials with potential applications in recyclable optical pH/temperature sensors. Full article

Background and Objectives: Non-invasive imaging biomarkers for the early detection of chronic kidney allograft injury are needed to improve long-term transplant outcomes. T1 mapping by magnetic resonance imaging (MRI) has emerged as a promising method to assess renal structure and function. This study aimed to determine the potential of MRI as a diagnostic tool for evaluating graft function and structural changes in kidney grafts 1 year after transplantation. Materials and Methods: Thirty-four kidney transplant recipients were prospectively recruited, with 27 completing the follow-up at one year. Renal MRI at 3T was performed to acquire T1, T2, and apparent diffusion coefficient (ADC) maps. Clinical parameters, including estimated glomerular filtration rate (eGFR), albumin-to-creatinine ratio (ACR), protein-to-creatinine ratio (PCR), and histological IF/TA scores, were collected. MRI parameters were compared across the groups stratified by clinical and histological markers. Diagnostic accuracy was assessed using receiver operating characteristic (ROC) analysis. Results: At 1 year, T1 corticomedullary differentiation (CMD) values were significantly higher in patients with elevated ACR (≥3 mg/mmol), PCR (≥15 mg/mmol), and mild to moderate or severe IF/TA, reflecting a reduction in the corticomedullary gradient. T1 CMD demonstrated moderate-to-good diagnostic performance in detecting ACR (AUC 0.791), PCR (AUC 0.730), and IF/TA (AUC 0.839). No significant differences were observed in T2 or ADC values across these groups. T1 CMD also showed a significant positive correlation with ACR but not with eGFR, suggesting a closer association with structural rather than functional deterioration. Conclusions: T1 mapping, particularly T1 CMD, shows promise as a non-invasive imaging biomarker for detecting chronic allograft injury and monitoring renal function 1 year after kidney transplantation. Full article

Background/Objectives: Hepatic artery thrombosis (HAT) is a serious vascular complication in patients undergoing orthotopic liver transplantation (OLT). It is associated with a high risk of graft loss, re-transplantation (re-OLT), and mortality. This study aimed to evaluate the incidence and management of HAT, analyzing potential risk factors. The secondary objectives included quantifying 90-day postoperative morbidity and mortality rates. Methods: In this retrospective, observational, single-center study, data from liver transplant donors and recipients who underwent OLT between 2004 and 2024 were analyzed. HAT was classified as early (e-HAT, ≤30 days) or late (l-HAT, >30 days). Univariate statistical analysis was performed to identify the risk factors associated with HAT occurrence. Multivariate analysis was not performed due to the small number of HAT events, which would increase the risk of model overfitting. Results: In the 20 year study period, a total of 532 OLTs were performed, including 37 re-OLTs. The rates of major morbidity, reoperation, and mortality within 90 days were 44.5%, 22.3%, and 7.1%, respectively. HAT occurred in 2.4% of cases (e-HAT: 1.6%; l-HAT: 0.7%). Among e-HAT cases, 66.6% were asymptomatic and identified through routine postoperative Doppler ultrasound. All e-HAT cases were surgically treated, with a re-OLT rate of 33.3%. Three l-HAT cases required re-OLT. Overall, the HAT-related mortality and re-OLT rates were 7.6% and 46.1%, respectively. At a follow-up of 86 months, the rate of graft loss was 9.2%, and the rate of post-OLT survival was 77%. Patients who developed HAT had a higher donor-to-recipient body weight ratio and longer warm ischemia times (WITs). Additionally, patients undergoing re-OLT had a higher risk of developing HAT. Conclusions: Although the incidence of HAT is low, its clinical consequences are severe. Early Doppler ultrasound surveillance is crucial for detecting e-HAT and preventing graft loss. A high donor-to-recipient body weight ratio, a prolonged warm ischemia time, and re-OLT seem to be associated with a high risk of HAT. Full article

Introduction: Postoperative atrial fibrillation (POAF) is a common complication after heart surgery, adversely impacting clinical outcomes and healthcare costs. Little is known about the dynamics of nucleotide metabolism associated with the development of POAF at a ventricular level. We conducted a post hoc trial analysis to investigate the changes in ventricular adenine nucleotides and the clinical predictors associated with the development of AF. Methods: Using data from a randomised trial, we analysed ATP/ADP, ATP/AMP, and energy charges in left and right ventricular biopsies of patients who developed AF compared to non-AF patients. A logistic regression model was used to understand the predictors associated with the development of atrial fibrillation in this cohort. Results: We analysed adenine nucleotide levels available in 88 patients who underwent coronary artery bypass grafting (CABG) (n = 65) and aortic valve replacement (AVR) (n = 23), out of which 27 (31%) developed a new onset of AF. Seventeen (43.4%) patients in the CABG group and ten (26.15%) in the AVR group developed AF. The patients who developed postoperative AF had longer cross-clamp times for CABG (p = 0.013) and AVR (p = 0.002). The most significant predictors for AF development were age (p = 0.003) and cross-clamp time (p = 0.012). In patients undergoing CABG who developed AF, we found a significant drop in post-reperfusion ATP/ADP and ATP/AMP ratios compared to pre-reperfusion. This was not significant for the patients who underwent AVR. Furthermore, the patients who underwent CABG and developed AF had higher pre- and post-reperfusion ATP/ADP ratios and energy charges than non-AF patients, suggesting a higher reserve of cardiac nucleotides. Conclusions: The development of postoperative atrial fibrillation is associated with intraoperative changes in the ventricular adenine nucleotide metabolism of patients undergoing CABG. In the clinical analysis, age and cross-clamp time were significant predictors of AF development. Full article

To broaden clean asphalt modification methods, this study employs a composite polymer of maleic anhydride-grafted styrene-butadiene-styrene (MA-g-SBS) and styrene-butadiene-styrene (SBS) as a modifier. The composite is formulated into polymer latex and used to modify emulsified asphalt. Routine performance tests were conducted on MA-g-SBS/SBS composite latex-modified emulsified asphalt (MSMEA) with varying ratios to determine the optimal composition. The ideal ratio was found to be MA-g-SBS:SBS = 1:4. Subsequently, conventional property tests, rheological analyses, microphase structure observations, and bending beam creep tests were conducted on MSMEA with the optimal ratio to assess the impact of the composite latex on asphalt performance. Findings indicated that increasing the latex content significantly enhanced the softening point and ductility while reducing penetration. These macroscopic improvements were notably superior to those achieved with single SBS latex modification. Fluorescence microscopy revealed that at low dosages, the MA-g-SBS/SBS composite dispersed uniformly as point-like structures within the asphalt. At higher dosages (above 5%), a distinct network structure emerged. The addition of the composite latex raised the complex shear modulus and rutting factor while reducing the phase angle, with pronounced fluctuations observed between 4% and 5% dosages. This suggests a substantial enhancement in the high-temperature performance of the emulsified asphalt, attributed to the formation of the network structure. FT-IR results confirmed that a chemical reaction occurred during the modification process. Additionally, the bending beam creep test demonstrated that the composite latex reduced asphalt brittleness and improved its low-temperature performance. Full article

The increasing number of acetabular revision total hip arthroplasties requires the evaluation of alternative materials in addition to established standards using a defined animal experimental defect that replicates the human acetabular revision situation as closely as possible. Defined bone defects in the load-bearing area of the acetabulum were augmented with various materials in an ovine periacetabular defect model (Group 1: NanoBone^® (artificial hydroxyapatite-silicate composite; Artoss GmbH, Germany); Group 2: autologous sheep cancellous bone; Group 3: Tutoplast^® (processed allogeneic sheep cancellous bone; Tutogen Medical GmbH, Germany)) and bridged with an acetabular reinforcement ring of the Ganz type. Eight months after implantation, a μ-CT examination (n = 8 animals per group) was performed. A μ-CT analysis of the contralateral acetabula (n = 8, randomly selected from all three groups) served as the control group. In a defined volume of interest (VOI), bone volume (BV), mineral volume (MV), and bone substitute volume (BSV), as well as the bone surface (BS) relative to the total volume (TV) and the surface-to-volume ratio (BS/BV), were determined. To assess the bony microarchitecture, trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), and trabecular number (Tb.N), as well as connectivity density (Conn.D), the degree of anisotropy (DA), and the structure model index (SMI), were evaluated. The highest BV was observed for NanoBone^® (Group 1), which also showed the highest proportion of residual bone substitute material in the defect. This resulted in a significant increase in BV/TV with a significant decrease in BS/BV. The assessment of the microstructure for Groups 2 and 3 compared to Group 1 showed a clear approximation of Tb.Th, Tb.Sp, Tb.N, and Conn.D to the microstructure of the control group. The SMI showed a significant decrease in Group 1. All materials demonstrated their suitability by supporting biological defect reconstruction. NanoBone^® showed the highest rate of new bone formation; however, the microarchitecture indicated more advanced bone remodeling and an approximate restoration of the trabecular structure for both autologous and allogeneic Tutoplast^® cancellous bone when using the impaction bone grafting technique. Full article

This study investigates the mechanical properties of double hydrophilic block copolymers (DHBCs) based on poly[oligo(ethylene glycol) methacrylate] (POEGMA) and poly(vinyl benzyl trimethylammonium chloride) (PVBTMAC) blocks by employing small amplitude oscillatory shear (SAOS) rheological measurements. We report that the mechanical properties of DHBCs are governed by the interfacial glass transition temperature (T_g^inter), verifying the disordered state of these copolymers. An increase in zero shear viscosity can be observed by increasing the VBTMAC content, yielding a transition from liquid-like to gel-like and finally to an elastic-like response for the PVBTMAC homopolymer. By changing the block arrangement along the backbone from statistical to sequential, a distinct change in the viscoelastic response is obvious, indicating the presence/absence of bulk-like regions. The tunable viscosity values and shear-thinning behavior achieved through alteration of the copolymer composition and block arrangement along the backbone render the studied DHBCs promising candidates for drug delivery applications. In the second part, the rheological data are analyzed within the framework of the classical free volume theories of glass formation. Specifically, the copolymers exhibit reduced fractional free volume and similar fragility values compared to the PVBTMAC homopolymer. On the contrary, the activation energy increases by increasing the VBTMAC content, reflecting the required higher energy for the relaxation of the glassy VBTMAC segments. Overall, this study provides information about the viscoelastic properties of DHBCs with densely grafted macromolecular architecture and shows how the mechanical and dynamical properties can be tailored for different drug delivery applications by simply altering the ratio between the two homopolymers. Full article