Search Results (89)

Dopamine (DA) is essential for motor control, motivation, and cognition, and its dysregulation is associated with neurological and psychiatric disorders such as Parkinson’s disease, schizophrenia, and addiction. Accurate and selective DA quantification in complex biological matrices is important, but remains challenging because of coexisting interferents and the low physiological concentration of DA. Here, we report a disposable electrochemical DA sensor based on screen-printed carbon electrodes (SPCEs) modified with metal–organic framework-derived gold nanocomposites (MOFD-AuNCs). The optimal material, synthesized with a 60 min NaBH₄ reduction step (MOFD-AuNC-60), exhibited superior electron-transfer kinetics compared with materials prepared at other reduction times. A single coating of MOFD-AuNC-60 on SPCEs enabled DA oxidation at a low potential (~0.05 V) with high selectivity in the presence of ascorbic acid and uric acid. In undiluted porcine serum, the sensor exhibited a dynamic range of 2.5–500 nM with a calculated detection limit of 0.5 nM. In undiluted human serum, it exhibited a dynamic range of 5–100 nM with a calculated detection limit of 4.4 nM. The MOFD-AuNC-60/SPCEs further demonstrated excellent reproducibility (relative standard deviation, 3%) and stability (7.5% current loss over 7 days). These results demonstrate that the proposed sensor provides a disposable, robust, and reliable sensing platform for direct DA detection in undiluted serum, showing promise for practical applications. Full article

Approximately 3.8% of the global population suffers from depressive disorders, posing a substantial public health challenge exacerbated by the COVID-19 pandemic due to widespread unemployment and prolonged social isolation. The difficulty in objectively quantifying psychological states underscores the need for effective stress assessment methods. Herein, we developed a portable electrochemical cortisol sensor (PECS) for accurate mental stress assessment. The PECS consists of a screen-printed carbon electrode decorated with gold nanoparticles and a molecularly imprinted polymer (MIP) synthesized via electropolymerization. The as-prepared PECS demonstrates a wide and linear detection range from 1 fM to 1 μM, an ultra-low detection limit of 0.4112 fM and a high sensitivity of 15.518 nA∙lg(nM⁻¹)∙cm⁻². This work provides new possibility of developing soft bioelectronics for non-invasive and real-time mental health monitoring. Full article

The rapid and sensitive detection of regulatory elements within transgenic constructs of genetically modified organisms (GMOs) is essential for effective monitoring and control of their distribution. In this study, we present several innovative electrochemical biosensing platforms for the detection of regulatory sequences in genetically modified (GM) plants, combining the loop-mediated isothermal amplification (LAMP) method with electrodes functionalized by two-dimensional (2D) nanomaterials. The sensor design exploits the high surface area and excellent conductivity of reduced graphene oxide, Ti₃C₂T_x, and molybdenum disulfide (MoS₂) to enhance signal transduction. Furthermore, we used a “green synthesis” method for Ti₃C₂T_x preparation that eliminates the use of hazardous hydrofluoric acid (HF) and hydrochloric acid (HCl), providing a safer and more sustainable approach for nanomaterial production. Within this framework, the performance of various custom-fabricated electrodes, including laser-patterned gold leaf films, physical vapor deposition (PVD)-deposited gold electrodes, and screen-printed gold electrodes, is evaluated and compared with commercial screen-printed gold electrodes. Additionally, gold and carbon electrodes were electrochemically covered by gold nanoparticles (AuNPs), and their properties were compared. Several electrochemical methods were used during the DNA detection, and their importance and differences in excitation signal were highlighted. Electrochemical properties, sensitivity, selectivity, and reproducibility are characterized for each electrode type to assess the influence of fabrication methods and material composition on sensor performance. The developed biosensing systems exhibit high sensitivity, specificity, and rapid response, highlighting their potential as practical tools for on-site GMO screening and regulatory compliance monitoring. This work advances electrochemical nucleic acid detection by integrating environmentally-friendly nanomaterial synthesis with robust biosensing technology. Full article

This work describes a non-enzymatic electrochemical glucose biosensor combining for the first time molecularly imprinted polymers (MIPs) for glucose concentration and gold nanoparticles (AuNPs) on screen-printed carbon electrodes (SPEs), where both MIPs and AuNPs were assembled in situ. Electrochemical impedance spectroscopy (EIS) was used to evaluate the analytical performance of the sensor, which has a linear range between 1.0 µM and 1.0 mM when standard solutions are prepared in buffer. Direct measurement of glucose was performed by chronoamperometry, measuring the oxidation current generated during direct glucose oxidation. The selectivity was tested against ascorbic acid and the results confirmed a selective discrimination of the electrode for glucose. Overall, the work presented here represents a promising tool for tracking glucose levels in serum. The use of glucose MIP on the electrode surface allows the concentration of glucose, resulting in lower detection limits, and the use of AuNPs reduces the potential required for the oxidation of glucose, which increases selectivity. In addition, this possible combination of two analytical measurements following different theoretical concepts can contribute to the accuracy of the analytical measurements. This combination can also be extended to other biomolecules that can be electrochemically oxidised at lower potentials. Full article

As an important neurotransmitter, the concentration of dopamine (DA) reflects certain physiological conditions and DA-related diseases. Rapid monitoring of DA levels is of great significance in regulating body health. However, regular electrochemical DA sensors suffer from poor sensitivity, low selectivity and interference immunity, as well as a complex preparation process. Herein, we developed an accessible and cost-effective electrochemical sensor with a copper indium selenide (CuInSe₂ or CIS)-modified screen-printed carbon electrode for DA discrimination. This DA sensor was developed using a facile one-step hydrothermal method without high-temperature quenching. Benefitting from the inherent merits of CIS and the conversion of Cu²⁺ and Cu⁺ during the catalytic reaction, the sensor attained both excellent sensitivity (2.511 μA·µM⁻¹·cm⁻¹) and selectivity among multiple substances interfering with DA. This work demonstrates the potential to improve the analytical performance of traditional electrochemical sensors. Full article

Prussian Blue (PB) is commonly incorporated into screen-printed enzymatic devices since it enables the determination of the enzymatically produced hydrogen peroxide at low potentials. Inkjet printing is gaining popularity in the development of electrochemical sensors as a substitute for screen printing. This work presents a fully inkjet-printed graphene–Prussian Blue platform, which can be paired with oxidase enzymes to prepare a biosensor of choice. The graphene electrode was inkjet-printed on a flexible polyimide substrate and then thermally and photonically treated with intense pulsed light, followed by inkjet printing of a PB nanoparticle suspension. The optimization of post-printing treatment and electrode deposition conditions was performed to yield a platform with minimal sheet resistance and peak potential differences. A thorough study of PB deposition was conducted: the fully inkjet-printed system was compared against sensors with PB deposited chemically or by drop casting the PB suspension on different kinds of carbon electrodes (glassy carbon, commercial screen-printed, and in-house inkjet-printed electrodes). For hydrogen peroxide detection, the fully inkjet-printed platform exhibits excellent sensitivity, a wider linear range, better linearity, and greater stability towards higher concentrations of peroxide than the other tested electrodes. Finally, lactate oxidase was immobilized in a chitosan matrix, and the prepared biosensor exhibited analytical performance comparable to other lactate sensors found in the literature in a wide, physiologically relevant linear range for measuring lactate concentration in sweat. The development of mediator-modified electrodes with a single fabrication technology, as demonstrated here, paves the way for the scalable production of low-cost, wearable, and flexible biosensors. Full article

Water pollution with phenolic compounds is a serious environmental issue that can pose a major threat to the water sources. This pollution can come from various agricultural and industrial activities. Phenolic compounds can have detrimental effects on both human health and the environment. Therefore, it is essential to develop and improve analytical methods for determination of these compounds in the water samples. In this work, the aim was to design and develop an electrochemical sensing platform for the determination of 2,4-dichlorophenol (2,4-DCP) in water samples. In this regard, a nanocomposite consisting of CoWO₄ nanoparticles (NPs) anchored on reduced graphene oxide nanosheets (rGO NSs) was prepared through a facile hydrothermal method. The formation of the CoWO₄/rGO nanocomposite was confirmed via different characterization techniques. Then, the prepared CoWO₄/rGO nanocomposite was used to modify the surface of a screen-printed carbon electrode (SPCE) for enhanced determination of 2,4-DCP. The good electrochemical response of the modified SPCE towards the oxidation of 2,4-DCP was observed by using cyclic voltammetry (CV) due to the good properties of CoWO₄ NPs and rGO NSs along with their synergistic effects. Under optimized conditions, the CoWO₄/rGO/SPCE sensor demonstrated a broad linear detection range (0.001 to 100.0 µM) and low limit of detection (LOD) (0.0007 µM) for 2,4-DCP determination. Also, the sensitivity of CoWO₄/rGO/SPCE for detecting 2,4-DCP was 0.3315 µA/µM. In addition, the good recoveries for determining spiked 2,4-DCP in the water samples at the surface of CoWO₄/rGO/SPCE showed its potential for determination of this compound in real samples. Full article

Electrochemical DNA sensors for DNA damage detection based on electroactive polymer poly(proflavine) (PPFL) that was synthesized at screen-printed carbon electrodes (SPCEs) from phosphate buffer (PB) and two natural deep eutectic solvents (NADESs) consisting of citric or malonic acids, D-glucose, and a certain amount of water (NADES1 and NADES2) were developed. Poly(proflavine) coatings obtained from the presented media (PPFL_PB, PPFL_NADES1, and PPFL_NADES2) were electrochemically polymerized via the multiple cycling of the potential or potentiostatic accumulation and used for the discrimination of thermal and oxidative DNA damage. The electrochemical characteristics of the poly(proflavine) coatings and their morphology were assessed using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The working conditions for calf thymus DNA implementation and DNA damage detection were estimated for all types of poly(proflavine) coatings. The voltammetric approach made it possible to distinguish native and chemically oxidized DNA while the impedimetric approach allowed for the successful recognition of native, thermally denatured, and chemically oxidized DNA through changes in the charge transfer resistance. The influence of different concentrations of conventional antioxidants and pharmaceutical preparations on oxidative DNA damage was characterized. Full article

The unregulated use of ciprofloxacin (CIPF) has led to increased resistance in patients and has threatened human health with issues such as digestive disorders, kidney disorders, and liver complications. In order to overcome these concerns, this work introduces a portable electrochemical sensor based on a disposable integrated screen-printed carbon electrode (SPCE) coated with gold nanoparticle-embedded thiol-functionalized Ti₃C₂T_x MXene (AuNPs-S-Ti₃C₂T_x MXene) for simple, rapid, precise, and sensitive quantification of CIPF in milk and water samples. The high surface area and electrical conductivity of AuNPs are maximized thanks to the strong interaction between AuNPs and SH-Ti₃C₂T_x MXene, which can prevent the aggregation of AuNPs and endow larger electroactive areas. Ti₃C₂T_x MXene was synthesized from Ti₃AlC₂ MAX phases, and its thiol functionalization was achieved using 3-mercaptopropyl trimethoxysilane. The prepared AuNPs-S-Ti₃C₂T_x MXene nanocomposite was characterized using FESEM, EDS, XRD, XPS, FTIR, and UV–visible spectroscopy. The electrochemical behavior of the nanocomposite was examined using CV, EIS, DPV, and LSV. The AuNPs-S-Ti₃C₂T_x MXene/SPCE showed higher electrochemical performances towards CIPF oxidation than a conventional AuNPs-Ti₃C₂T_x MXene/SPCE. Under the optimized DPV and LSV conditions, the developed nonenzymatic CIPF sensor displayed a wide range of detection concentrations from 0.50 to 143 μM (DPV) and from 0.99 to 206 μM (LSV) with low detection limits of 0.124 μM (DPV) and 0.171 μM (LSV), and high sensitivities of 0.0863 μA/μM (DPV) and 0.2182 μA/μM (LSV). Full article

A novel sandwich-type electrochemical aptasensor based on supramolecularly immobilized affinity bioreceptor was prepared via host–guest interactions. This method utilizes an adamantane-modified, target-responsive hairpin DNA aptamer as a capture molecular receptor, along with a perthiolated β-cyclodextrin (CD) covalently attached to a gold-modified electrode surface as the transduction element. The proposed sensing strategy employed an enzyme-modified aptamer as the signalling element to develop a sandwich-type aptasensor for detecting prostate-specific antigen (PSA). To achieve this, screen-printed carbon electrodes (SPCEs) with electrodeposited reduced graphene oxide (RGO) and gold nanoferns (AuNFs) were modified with the CD derivative to subsequently anchor the adamantane-modified anti-PSA aptamer via supramolecular associations. The sensing mechanism involves the affinity recognition of PSA molecules on the aptamer-enriched electrode surface, followed by the binding of an anti-PSA aptamer–horseradish peroxidase complex as a labelling element. This sandwich-type arrangement produces an analytical signal upon the addition of H₂O₂ and hydroquinone as enzyme substrates. The aptasensor successfully detected the biomarker within a concentration range of 0.5 ng/mL to 50 ng/mL, exhibiting high selectivity and a detection limit of 0.11 ng/mL in PBS. Full article

The development of biosensors for determining the most diverse biomolecules is a constant focus of many research groups. There is a latent need to propose sensors that combine portability, simple measurements, and good analytical performance. Here, we propose an electrochemical immunosensor that is fully portable and energy-independent for diagnosing antibodies against SARS-CoV-2 (the virus that causes COVID-19). Initially, disposable screen-printed carbon electrodes (SPEs) were covered by gold microblobs (AuMBs), which were synthesized amperometrically from Au³⁺ ions. Then, the SPE-AuMBs were coated with cysteamine, which allowed the N-hydroxysuccinimide-activated SARS-CoV-2 antigen (spike protein) to be immobilized. The antigen-activated electrode was used to detect COVID-19 antibodies from current measurements obtained by differential pulse voltammetry. The AuMBs synthesis time was optimized, and the presence of gold structures improved the electrochemical responses of the SPE. It was possible to quantitatively determine antibodies in the concentration range of 0.25 to 10 µg mL⁻¹. This range includes concentrations found in biological fluids from patients at any stage of the disease. An analysis took approximately the same time as traditional rapid nasal tests (20 min) and costed less, considering all the steps necessary to prepare a disposable antigen-functionalized SPE. Full article

In this study, nanoporous gold (NPG) was deposited on a screen-printed carbon electrode (SPCE) by the dynamic hydrogen bubble template (DHBT) method to prepare an electrochemical sensor for the simultaneous determination of Pb²⁺ and Cu²⁺ by square wave anodic stripping voltammetry (SWASV). The electrodeposition potential and electrodeposition time for NPG/SPCE preparation were investigated thoroughly. Scanning electron microscopy (SEM) and energy-dispersive X-ray diffraction (EDX) analysis confirmed successful fabrication of the NPG-modified electrode. Electrochemical characterization exhibits its superior electron transfer ability compared with bare and nanogold-modified electrodes. After a comprehensive optimization, Pb²⁺ and Cu²⁺ were simultaneously determined with linear range of 1–100 μg/L for Pb²⁺ and 10–100 μg/L for Cu²⁺, respectively. The limits of detection were determined to be 0.4 μg/L and 5.4 μg/L for Pb²⁺ and Cu²⁺, respectively. This method offers a broad linear detection range, a low detection limit, and good reliability for heavy metal determination in drinking water. These results suggest that NPG/SPCE holds great promise in environmental and food applications. Full article

The development of low-cost, sensitive, and simple analytical tools for biomolecule detection in health status monitoring is nowadays a growing research topic. Sensing platforms integrating nanocomposite materials as recognition elements in the monitoring of various biomolecules and biomarkers are addressing this challenging objective. Herein, we have developed electrochemical sensing platforms by means of a novel fabrication procedure for biomolecule detection. The platforms are based on commercially available low-cost conductive substrates like glassy carbon and/or screen-printed carbon electrodes selectively functionalized with nanocomposite materials composed of Ag and Au metallic nanoparticles and an organic polymer, poly(3,4-ethylenedioxythiophene). The novel fabrication method made use of alternating currents with controlled amplitude and frequency. The frequency of the applied alternating current was 100 mHz for the polymer deposition, while a frequency value of 50 mHz was used for the in situ electrodeposition of Ag and Au nanoparticles. The selected frequency values ensured the successful preparation of the composite materials. The use of readily available composite materials is intended to produce cost-effective analytical tools. The judicious modification of the organic conductive matrix by various metallic nanoparticles, such as Ag and Au, extends the potential applications of the sensing platform toward a range of biomolecules like quercetin and epinephrine, chosen as benchmark analytes for proof-of-concept antioxidant and neurotransmitter detection. The sensing platforms were tested successfully for quercetin and epinephrine determination on synthetic and real samples. Wide linear response ranges and low limit-of-detection values were obtained for epinephrine and quercetin detection. Full article

Metal–organic frameworks (MOFs) are frequently utilized as sensing materials. Unfortunately, the low conductivity of MOFs hinder their further application in electrochemical determination. To overcome this limitation, a novel modification strategy for MOFs was proposed, establishing an electrochemical determination method for cyanides in Baijiu. Co and Ni were synergistically used as the metal active centers, with meso−Tetra(4−carboxyphenyl)porphine (TCPP) and Ferrocenecarboxylic acid (Fc−COOH) serving as the main ligands, synthesizing Ni/Co−MOF−TCPP−Fc through a hydrothermal method. The prepared MOF exhibited improved conductivity and stable ratio signals, enabling rapid and sensitive determination of cyanides. The screen−printed carbon electrodes (SPCE) were suitable for in situ and real−time determination of cyanide by electrochemical sensors due to their portability, low cost, and ease of mass production. A logarithmic linear response in the range of 0.196~44 ng/mL was demonstrated by this method, and the limit of detection (LOD) was 0.052 ng/mL. Compared with other methods, the sensor was constructed by a one−step synthesis method, which greatly simplifies the analysis process, and the determination time required was only 4 min. During natural cyanide determinations, recommended readouts match well with GC−MS with less than 5.9% relative error. Moreover, this electrochemical sensor presented a promising method for assessing the safety of cyanides in Baijiu. Full article

Two electrochemical sensors were developed in this study, with their preparations using two nanomaterials with remarkable properties, namely, carbon nanofibers (CNF) modified with Fe₃O₄ nanoparticles and multilayer carbon nanotubes (MWCNT) modified with Fe₃O₄ nanoparticles. The modified screen-printed electrodes (SPE) were thus named SPE/Fe₃O₄-CNF and SPE/Fe₃O₄-MWCNT and were used for the simultaneous detection of heavy metals (Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺). The sensors have been spectrometrically and electrochemically characterized. The limits of detection of the SPE/Fe₃O₄-CNF sensor were 0.0615 μM, 0.0154 μM, 0.0320 μM and 0.0148 μM for Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺, respectively, and 0.2719 μM, 0.3187 μM, 1.0436 μM and 0.9076 μM in the case of the SPE/ Fe₃O₄-MWCNT sensor (following optimization of the working parameters). Due to the modifying material, the results showed superior performance for the SPE/Fe₃O₄-CNF sensor, with extended linearity ranges and detection limits in the nanomolar range, compared to those of the SPE/Fe₃O₄-MWCNT sensor. For the quantification of heavy metal ions Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺ with the SPE/Fe₃O₄-CNF sensor from real samples, the standard addition method was used because the values obtained for the recovery tests were good. The analysis of surface water samples from the Danube River has shown that the obtained values are significantly lower than the maximum limits allowed according to the quality standards specified by the United States Environmental Protection Agency (USEPA) and those of the World Health Organization (WHO). This research provides a complementary method based on electrochemical sensors for in situ monitoring of surface water quality, representing a useful tool in environmental studies. Full article