Search Results (662)

Recently, essential rose oils and rose products have gained increasing importance in both the cosmetic and food industries, as well as in the composition of medicinal products. We investigated the in vitro antiviral activity of essential oil and floral water from Rosa damascena Mill against herpes simplex virus type 1 (HSV-1) infection in rabbit retinal cells (RRCs). The composition of the main chemical components in the rose essential oil was determined by means of gas chromatographic analysis. The effect on the viral replication cycle was determined using the cytopathic effect (CPE) inhibition assay. The virucidal activity, the effect on the adsorption stage of the virus to the host cell, and the protective effect on healthy cells were evaluated using the endpoint dilution method. The effects were determined as deviation in the viral titer, Δlg, for the treated cells from the one for the untreated viral control. The identified main active components of rose oil are geraniol (28.73%), citronellol (21.50%), nonadecane (13.13%), nerol (5.51%), heneicosane (4.87%), nonadecene (3.93), heptadecane (2.29), farnesol (2.11%), tricosane (1.29%), eicosane (1.01%), and eugenol (0.85%). The results demonstrated that both rose products do not have a significant effect on the virus replication but directly affect the viral particles and reduce the viral titer by Δlg = 3.25 for floral water and by Δlg = 3.0 for essential oil. Significant inhibition of the viral adsorption stage was also observed, leading to a decrease in the viral titers by Δlg = 2.25 for floral water and by Δlg = 2.0 for essential oil. When pretreating healthy cells with rose products, both samples significantly protected them from subsequent infection with HSV-1. This protective effect was more pronounced for the oil (Δlg = 2.5) compared to the one for the floral water (Δlg = 2.0). We used the in silico molecular docking method to gain insight into the mechanism of hindrance of viral adsorption by the main rose oil compounds (geraniol, citronellol, nerol). These components targeted the HSV-1 gD interaction surface with nectin-1 and HVEM (Herpesvirus Entry Mediator) host cell receptors, at N-, C-ends, and N-end, respectively. These findings could provide a structural framework for further development of anti-HSV-1 therapeutics. Full article

Plasma-activated water (PAW), enriched with reactive oxygen and nitrogen species (RONS), presents oxidative and antimicrobial characteristics with potential in cosmetic applications. This study examined the effects of two PAW formulations—nitrate-rich (PAW-N) and peroxide-rich (PAW-P)—on human hair types classified as straight (Type 1), wavy (Type 2), and coily/kinky (Type 4). The impact of PAW on hair structure and chemistry was evaluated using Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), UV–Vis spectrophotometry, and physicochemical analyses of the liquids (pH, ORP, conductivity, and TDS). PAW-N, with high nitrate content (~500 mg/L), low pH (2.15), and elevated conductivity (6244 µS/cm), induced significant damage to porous hair types, including disulfide bond cleavage, protein oxidation, and lipid degradation, as indicated by FTIR and EDS data. SEM confirmed severe cuticle disruption. In contrast, PAW-P, containing >25 mg/L of hydrogen peroxide and exhibiting milder acidity and lower ionic strength, caused more localized and controlled oxidation with minimal morphological damage. Straight hair showed greater resistance to both treatments, while coily and wavy hair were more susceptible, particularly to PAW-N. These findings suggest that the formulation and ionic profile of PAW should be matched to hair porosity for safe oxidative treatments, supporting the use of PAW-P as a gentler alternative in hair care technologies. Full article

Type I collagen is a major protein in animals, and its hydrolyzed products, collagen peptides, have wide-ranging applications. This article reviews collagen peptides’ preparation methods, biological activities, and application progress in the fields of food, cosmetics, and medicine. By employing various extraction and hydrolysis methods, collagen peptides with different molecular weights can be obtained, and their biological activities are closely related to their molecular weight and amino acid sequence. Studies have revealed that collagen peptides possess a variety of biological activities, including antioxidant, hematopoietic promotion, osteogenic differentiation promotion, antihypertensive, and anti-diabetic effects. In the food industry, their antioxidant and hypoglycemic properties have opened new avenues for the development of healthy foods; in the cosmetics field, the moisturizing, anti-aging, and repair functions of collagen peptides are favored by consumers; in the medical field, collagen peptides are used in wound dressings, drug carriers, and tissue engineering scaffolds. Looking to the future, the development of green and efficient preparation technologies for collagen peptides and in-depth research into the relationship between their structure and function will be important research directions. The multifunctional properties of collagen peptides provide a broad prospect for their further application in the health industry. Full article

In this study, we designed an injectable skin-rejuvenating formulation based on polyethylene glycol–polycaprolactone–polyethylene glycol (PEG-PCL-PEG) copolymers to provide a synergistic combination of biocompatibility, antioxidative capacity, and regenerative potential. Through the systematic optimization of the precursor molar ratio and molecular weight, well-defined PEG-PCL-PEG copolymers were synthesized and structurally characterized using gel permeation chromatography (GPC), proton nuclear magnetic resonance (¹H-NMR), and Fourier transform infrared (FT-IR) spectroscopy. An optimized precipitation and drying protocol effectively reduced residual solvents, as confirmed by gas chromatography (GC). Idebenone was incorporated as an antioxidant to prevent skin aging, while hyaluronic acid (HA), L-arginine, and glycerin were included to promote collagen regeneration. In vitro assays demonstrated that idebenone-loaded samples exhibited prolonged intracellular antioxidant activity with low cytotoxicity. The collagen-promoting formulation, containing HA, glycerin, and L-arginine, enhanced the expression of transforming growth factor-β (TGF-β) and type III collagen (COL3) while suppressing inflammatory genes, suggesting a favorable environment for extracellular matrix remodeling. In vivo evaluation corroborated these outcomes, showing angiogenesis, collagen reorganization, and progressive dermal thickness. Histological analysis further confirmed sustained matrix regeneration and tissue integration. These results highlight the potential of PEG-PCL-PEG-based injectables as a multifunctional platform for collagen regeneration, offering a promising strategy for both cosmetic and clinical applications. Full article

Lavender species hold substantial economic importance due to their widespread cultivation for essential oils (EOs). Lavender EOs contain terpenes essential for industries such as cosmetics, personal care, and pharmaceuticals. In the biosynthetic pathway of EOs, Lavandula angustifolia bornyl diphosphate synthase (LaBPPS) catalyzes the conversion of geranyl diphosphate (GPP) to bornyl diphosphate (BPP). However, the functional mechanisms of LaBPPS remain poorly understood. Here, we conducted mutational experiments based on the molecular docking results, and found that mutations at positions D356A, D360A, R497A, D501A, or E508A led to a 50- to 100-fold reduction in the activity. Deletion of region 1–58 (∆1–58) did not affect activity compared to the wild-type (WT) protein, while deletions of regions 1–74 or 59–74 (∆1–74 or ∆59–74) significantly decreased the activity. Conversely, deletion of residues 578–602 (∆578–602) dramatically increased the activity. The LaBPPS gene showed dramatically higher expression levels in flowers compared to other tissues (stems, leaves and roots), peaking at 8:00. Our results provide valuable insights into EO biosynthesis in lavender and suggest potential strategies for genetic engineering aimed at improving EO quality. Full article

As human living standards have improved, the demand for industrial products—such as food, dyes, cosmetics, pharmaceuticals, and others—has significantly increased. This surge in production has, in turn, led to a rise in industrial wastewater (IW) generation, which is often marked by low biodegradability and a high concentration of toxic or refractory compounds. This review highlights the use of coagulation–flocculation–decantation (CFD) and advanced oxidation processes (AOPs) for treating such wastewater. A comprehensive analysis of CFD is provided, covering the underlying mechanisms, types of coagulants (including metal-based, animal-derived, mineral, and plant-based), and the optimal operational conditions required to maximize treatment efficiency. This review discusses the properties and performance of these coagulants in detail. In addition, this paper explores the methods used in AOPs to reduce organic carbon, focusing particularly on the roles of hydroxyl and sulfate radicals. Emphasis is placed on the enhancement of these processes using radiation, chelating agents, and heterogeneous catalysts, along with their effectiveness in IW treatment. Finally, the integration of CFD as a pre-treatment step to improve the efficiency of subsequent AOPs is provided. Full article

The essential oil isolated from clove (Syzygium aromaticum) is used in food, medicine, cosmetics, agriculture, and aromatherapy for its antimicrobial, antioxidant, and analgesic properties. This systematic review, following the PRISMA 2020 methodology, evaluates the application of clove essential oil in meat and meat products to determine its effectiveness in preventing oxidative damage and improving product quality. A search was performed in various databases, obtaining 639 studies. After removing duplicates and applying inclusion and exclusion criteria, 43 relevant articles were selected. Studies published between 1999 and 2024 that evaluated clove essential oil in meat for human consumption were included, excluding research on extracts other than essential oil or supplements for animal feed. The studies suggest that clove essential oil improves parameters such as oxidative stability, colour preservation, and the reduction in reactive compounds such as thiobarbituric acid-reactive substances, thereby increasing the shelf life and safety of meat and meat products. Oxidation is reduced through free radical inhibition and lipid protection. The main variability detected includes the type of meat, application method and storage conditions. The concentrations used ranged from 2.65 mL/kg to 5%. Although variability in methodologies and concentrations used is a limitation for meta-analysis, the findings support the potential of clove essential oil as a natural alternative for preserving meat products, responding to consumer demand for safer foods free of synthetic preservatives. Full article

A skin flap is a composite tissue unit comprising skin and subcutaneous fat with an intact vascular supply. Skin flaps are commonly employed for wound reconstruction, transplantation of damaged tissues, and cosmetic procedures. However, flap necrosis resulting from ischemia/reperfusion injury (IRI) is a frequent complication, leading to surgical failure. Therefore, This review systematically summarizes the mechanisms and therapeutic interventions targeting specific modalities of programmed cell death (PCD) in the context of IRI compromising flap survival. These interventions encompass a range of strategies, including preconditioning, systemic administration, and local drug delivery. Furthermore, we summarize key therapeutic targets for various types of PCD, along with shared pathways and therapies applicable across multiple PCD modalities. The findings presented in this review validate the feasibility of targeted therapies against PCD to prevent post-reconstructive flap necrosis. These findings provide novel strategies, such as targeting common pathways in PCD and leveraging diverse biomaterials, to enhance therapeutic outcomes. Further clinical investigations are warranted to target PCD pathways for the treatment of flap necrosis. Full article

Aging leads to a decline in skin function due to intrinsic factors (genetics, hormones) and extrinsic factors (sun exposure, pollutants). Type I collagen plays a vital role in maintaining skin integrity and elasticity. As aging progresses, collagen synthesis diminishes, resulting in weakened skin structure and wrinkle formation. This systematic review explores the role of type I collagen in skin aging by summarizing key clinical findings. A systematic search was conducted using PubMed and ScienceDirect as the primary databases, including studies published between 2014 and 2025 that addressed type I collagen and skin aging. Eleven clinical studies were selected following PRISMA guidelines. The results consistently show the decline of type I collagen as a central contributor to dermal thinning, loss of elasticity, and the appearance of wrinkles and sagging. Clinical trials demonstrate that collagen supplementation, particularly from hydrolyzed fish cartilage and low-molecular-weight peptides, enhances collagen production, improves skin hydration and texture, and reduces signs of photoaging. Overall, the evidence emphasizes the critical role of type I collagen in skin aging and suggests that targeted collagen supplementation may serve as an effective strategy to maintain skin structure and combat visible signs of aging. Full article

Laccase, a member of the blue multicopper oxidase family, is widely distributed across diverse taxonomic groups, including fungi, bacteria, plants, and insects. This enzyme drives biocatalytic processes through the oxidation of phenolic compounds, aromatic amines, and lignin derivatives, underpinning its significant potential in the food industry, cosmetics, and environmental remediation. However, wild-type laccases face critical limitations, such as low catalytic efficiency, insufficient expression yields, and poor stability. To address these bottlenecks, this review systematically examines optimization strategies for heterologous laccase expression by fungal and bacterial systems. Additionally, we discuss protein engineering for laccase modification, with a focus on the structural basis and active-site redesign. The comprehensive analysis presented herein provides strategic suggestions for advancing laccase engineering, ultimately establishing a theoretical framework for developing high-efficiency, low-cost engineered variants for large-scale biomanufacturing and green chemistry applications. Full article

(1) Background: Clays are popular raw materials of natural origin used in cosmetology, beauty salons, and home care. They have moisturizing, soothing, cleansing, disinfecting, detoxifying, and regenerating properties, and can be used externally in the form of poultices or internally in solution form. Though they are characterized by a rich and diverse mineral composition and are considered safe for the body, their use can expose users to harmful elements including mercury. (2) Materials and methods: This study analyzed mercury (Hg) concentrations in samples of cosmetic clays available on the Polish market. Hg analysis was performed using the AAS method with an AMA 254 analyzer. The clays differed in type/color and were purchased from different manufacturers. (3) Results: The mean Hg content in all the tested samples was 28.91 µg/kg, with a range of changes of 1.87–200.81 µg/kg. The highest concentrations of Hg were found in green (AM = 53.26 µg/kg) and white (AM = 52.80 µg/kg) clays, while the lowest were detected in purple (AM = 2.56 µg/kg) and blue (AM = 3.69 µg/kg) clays. The differences in Hg content between individual types of clay were statistically significant. (4) Conclusions: Due to the presence of Hg found in all the samples of cosmetic clay tested, it is likely that these products need to be tested for their metal contents. Full article

Background: Scheuermann’s kyphosis (SK) is characterized by anterior wedging of >5 degrees at three or more contiguous vertebrae associated with severe back pain and cosmetic disfigurement. Different surgical interventions have been applied for SK correction, but the optimal operational treatment remains controversial. Objectives: The aim of our study is to analyze all the current indications for the surgical correction of SK, as well as to describe the instrumentation methods and techniques in order to detect the ideal operational management and accompanied complications. Methods: This comprehensive review investigates the up-to-date surgical indications and approaches for SK, the current trends, and the associated postoperative functional outcomes. A detailed search of PubMed, Web of Science and Google Scholar databases in English literature was performed for articles during the last 20 years. Additional criteria were peer-reviewed original studies that provided the type of interventions for SK and the clinical outcomes. Results: Thirty studies that met our induction criteria were analyzed. The up-to-date surgical indications such as back pain, failure of conservative treatment, progression of deformity, and neurological complications were described. Anterior (AO) and posterior-only (PO), and combined anterior–posterior (AP) approaches and instrumentation techniques were outlined. The most common side effects of the above interventions were hardware failure, loss of correction and Proximal Junctional Kyphosis. Contrariwise, in PO, reduced blood loss and operational duration was noted. Conclusions: Although the published studies reported contradictory results of the effectiveness of the various techniques applied for SK treatment, the PO fusion was correlated with a decreased rate of complications that resulted in its current increase in popularity. Full article

This study investigated the potential cosmetic properties of the ethyl acetate (EtOAc) fraction obtained from the roots of Astilboides tabularis (Hemsl.) Engl., focusing on skin-whitening, antiwrinkle, and moisturizing effects using cell-based assays and three-dimensional (3D) artificial skin models (Neoderm-ED and Neoderm-ME). The EtOAc fraction showed significant dose-dependent inhibitory activity against tyrosinase (TYR) (72.0% inhibition at 50 µg/mL), comparable to that of kojic acid. In α-melanocyte-stimulating hormone (α-MSH)-stimulated Neoderm-ME artificial skin containing melanocytes, the EtOAc fraction reduced melanin synthesis at concentrations of 50 and 75 µg/mL and decreased melanogenesis-related gene expression, including TYR, microphthalmia-associated transcription factor (MITF), tyrosinase-related protein-1 (TRP-1) and TRP-2. In the antiwrinkle assays, the EtOAc fraction effectively inhibited elastase activity (41.5% inhibition at 10 µg/mL), exceeding the efficacy of ursolic acid. In the Neoderm-ED artificial skin model, the EtOAc fraction reversed structural damage induced by particulate matter (PM10), restoring epidermal thickness and dermal density. This improvement was supported by the increased expression of skin barrier and antiwrinkle genes, including filaggrin, hyaluronic acid synthase-1 (HAS-1), HAS-2, aquaporin-3 (AQP-3), collagen type I alpha 1 chain (COL1A1), elastin, tissue inhibitor of metalloproteinases-1 (TIMP-1), and TIMP-2, as well as decreased expression of matrix metalloproteinases (MMP-1, MMP-3, and MMP-9). Our results indicate that the EtOAc fraction from A. tabularis root has considerable potential as a multifunctional cosmetic. Full article

Background/Objectives: Breast implants are widely used in reconstructive surgeries, as well as in cosmetic procedures, to enhance or restore breast shape and volume. With advances in techniques and materials, these devices have become safer and more effective over the years. Nevertheless, complications such as capsular contracture, rupture, infections, or other types of malignancies (BIA-SCC). This study evaluated the postmarketing safety and performance of implants via technovigilance data and a review of scientific studies. Methods: The research analyzed publications from the BVS, PubMed, Embase, and ClinicalTrials databases from between 2007 and 2023 (15 years), in addition to reports registered in the Notivisa system during the same period. Results: A total of 113 studies were identified, 15 of which were selected for the final analysis, which revealed that capsular contracture, seroma, infection, and rupture were the most common complications. In the Notivisa system, 786 reports were found, including 397 technical complaints and 389 adverse events, with pain, infections, and lymphoma among the most frequently reported issues. Conclusions: These findings highlight the importance of continuous surveillance to identify risks and promote improvements in the quality and safety of breast implants, ensuring patient well-being. As a practical contribution, a clinical decision-making algorithm was proposed to support healthcare professionals in the early identification and management of implant-related complications. Full article

Functional fabrics embedded with active materials that can be released in a controlled manner upon external triggering have been explored for biomedical and cosmetic applications. This study introduces a method for the fabrication of nonwoven fabrics coated with crosslinked polyvinyl alcohol (PVA) for in situ encapsulation and controlled release of hydrophilic active agent, allantoin. Two types of crosslinked coatings were examined using citric acid (CA) or polyacrylic acid (PAA) as crosslinkers. Based on gel content, differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) analyses PVA:CA coatings exhibited a higher crosslinking density compared to PVA:PAA systems. Swelling behavior was measured at 62% after 30 min for PVA:PAA 7:3 films and 36% after 60 min for PVA:CA 7:3 crosslinked films. The release of allantoin from the coated fabrics was influenced by the coating thickness (250–330 µm), the formulation viscosity (8–250 cP), allantoin content (1.2–4.2 mg) and the molecular weight between crosslinks (M_C) 1,000,000–494 g/mol. PVA:CA 7:3 coating allowed the controlled release of 97% allantoin over 8 h, whereas PVA:PAA 7:3 coating exhibited a more prolonged release profile, with 96% of allantoin released over 20 h. Kinetic analyses of the release profiles revealed a good agreement with zero-order release. Full article