Search Results (310)

Electrochemical CO₂ reduction reaction (CO₂RR) is a key technology for achieving carbon neutrality and efficient utilization of renewable energy, capable of converting CO₂ into high-value-added carbon-based fuels and chemicals. Copper (Cu)-based catalysts have attracted significant attention due to their unique performance in generating multi-carbon (C₂₊) products such as ethylene and ethanol; however, there are still many controversies regarding their complex reaction mechanisms, active sites, and the dynamic evolution of intermediates. In situ Raman spectroscopy, with its high surface sensitivity, applicability in aqueous environments, and precise detection of molecular vibration modes, has become a powerful tool for studying the structural evolution of Cu catalysts and key reaction intermediates during CO₂RR. This article reviews the principles of electrochemical in situ Raman spectroscopy and its latest developments in the study of CO₂RR on Cu-based catalysts, focusing on its applications in monitoring the dynamic structural changes of the catalyst surface (such as Cu⁺, Cu⁰, and Cu²⁺ oxide species) and identifying key reaction intermediates (such as *CO, *OCCO(*O=C-C=O), *COOH, etc.). Numerous studies have shown that Cu-based oxide precursors undergo rapid reduction and surface reconstruction under CO₂RR conditions, resulting in metallic Cu nanoclusters with unique crystal facets and particle size distributions. These oxide-derived active sites are considered crucial for achieving high selectivity toward C₂₊ products. Time-resolved Raman spectroscopy and surface-enhanced Raman scattering (SERS) techniques have further revealed the dynamic characteristics of local pH changes at the electrode/electrolyte interface and the adsorption behavior of intermediates, providing molecular-level insights into the mechanisms of selectivity control in CO₂RR. However, technical challenges such as weak signal intensity, laser-induced damage, and background fluorescence interference, and opportunities such as coupling high-precision confocal Raman technology with in situ X-ray absorption spectroscopy or synchrotron radiation Fourier transform infrared spectroscopy in researching the mechanisms of CO₂RR are also put forward. Full article

Erbium (${\mathrm{Er}}^{3+}$) emitters are relevant for optical applications due to their narrow emission line directly in the telecom C-band due to the ⁴I_13/2 → ⁴I_15/2 transition at 1.54 μm. Additionally, they are promising candidates for future quantum technologies when embedded in thin film silicon-on-insulator (SOI) to achieve fabrication scalability and CMOS compatibility. In this paper we integrate Er³⁺ emitters in SOI metasurfaces made of closely spaced arrays of nanodisks, to study their spontaneous emission via room and cryogenic temperature confocal microscopy, off-resonance and in-resonance photoluminescence excitation at room temperature and time-resolved spectroscopy. This work demonstrates the possibility to adopt CMOS-compatible and fabrication-scalable metasurfaces for controlling and improving the collection efficiency of the spontaneous emission from the Er³⁺ transition in SOI and that they could be adopted in similar technologically advanced materials. Full article

The Chengyang City (城阳城) site in Xinyang, Henan Province, China, was a significant northern military stronghold of the Chu state during the Warring States period (475/403–221 BCE). The lacquered armor unearthed from Tomb M18 provides critical material evidence for studying ancient military technology and lacquer craftsmanship. In this study, a comprehensive analytical approach combining ultra-depth optical microscopy, Fourier-transform infrared spectroscopy (FTIR), confocal micro-Raman spectroscopy, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS) and pyrolysis–gas chromatography/mass spectrometry (Py-GC/MS) were employed to systematically characterize the structural and compositional features of the armor samples. The results indicate that the armor was constructed with a leather substrate and lacked any lacquer ash layer, while the surface exhibited multiple layers of mixed laccol and urushiol-based lacquer coatings. Cinnabar (HgS) was identified as the primary red pigment, and no carbon black or iron-based blackening agents were detected in the dark lacquer layers. Notably, the presence of laccol suggests that such lacquer resources may have also been produced in mainland China, offering new perspectives on the prevailing view that associates laccol exclusively with “Vietnamese lacquer.” This study elucidates the technological characteristics of mid-Warring States period lacquered armor, provides scientific insights into ancient lacquering techniques, and contributes valuable data for the conservation and restoration of similar cultural heritage artifacts. Full article

Background: In recent decades, dermatological diagnostics have undergone a profound transformation, driven by the integration of new technologies alongside traditional methods. Classic techniques such as the Tzanck smear, potassium hydroxide (KOH) preparation, and Wood’s lamp examination remain fundamental in everyday clinical practice due to their simplicity, speed, and accessibility. At the same time, the development of non-invasive imaging technologies and the application of artificial intelligence (AI) have opened new frontiers in the early detection and monitoring of both neoplastic and inflammatory skin diseases. Methods: This review aims to provide a comprehensive overview of how conventional and emerging diagnostic tools can be integrated into dermatologic practice. Results: We examined a broad spectrum of diagnostic methods currently used in dermatology, ranging from traditional techniques to advanced approaches such as digital dermoscopy, reflectance confocal microscopy (RCM), optical coherence tomography (OCT), line-field confocal OCT (LC-OCT), 3D total body imaging systems with AI integration, mobile applications, electrical impedance spectroscopy (EIS), and multispectral imaging. Each method is discussed in terms of diagnostic accuracy, clinical applications, and potential limitations. While traditional methods continue to play a crucial role—especially in resource-limited settings or for immediate bedside decision-making—modern tools significantly enhance diagnostic precision. Dermoscopy and its digital evolution have improved the accuracy of melanoma and basal cell carcinoma detection. RCM and LC-OCT allow near-histological visualization of skin structures, reducing the need for invasive procedures. AI-powered platforms support lesion tracking and risk stratification, though their routine implementation requires further clinical validation and regulatory oversight. Tools like EIS and multispectral imaging may offer additional value in diagnostically challenging cases. An effective diagnostic approach in dermatology should rely on a thoughtful combination of methods, selected based on clinical suspicion and guided by Bayesian reasoning. Conclusions: Rather than replacing traditional tools, advanced technologies should complement them—optimizing diagnostic accuracy, improving patient outcomes, and supporting more individualized, evidence-based care. Full article

Soybean meal (SBM) is extensively used as a predominant protein source in animal feed. However, raw soybean cannot be directly utilized in animal feed, due to the presence of the Kunitz trypsin inhibitor (KTi) and the Bowman–Birk protease inhibitor (BBi). These antinutritional factors inhibit the digestive enzymes in animals, trypsin and chymotrypsin, resulting in poor animal performance. To inactivate the activity of protease inhibitors, SBM is subjected to heat processing, a procedure that can negatively impact the soybean protein quality. Thus, it would be beneficial to develop soybean varieties with little or no trypsin inhibitors. In this study, we report on the creation of experimental soybean lines with significantly reduced levels of Bowman–Birk protease inhibitors. RNA interference (RNAi) technology was employed to generate several transgenic soybean lines. Some of these BBi knockdown soybean lines showed significantly lower amounts of both trypsin and chymotrypsin inhibitor activities. Western blot analysis revealed the complete absence of BBi in selected RNAi-derived lines. RNA sequencing (RNAseq) analysis demonstrated a drastic reduction in the seed-specific expression of BBi genes in the transgenic soybean lines during seed development. Confocal fluorescence immunolabeling studies showed that the accumulation of BBi was drastically diminished in BBi knockdown lines compared to wild-type soybeans. The absence of BBi in the transgenic soybean did not alter the overall protein, oil, and sulfur amino acid content of the seeds compared to wild-type soybeans. The seed protein from the BBi knockdown lines were more rapidly hydrolyzed by trypsin and chymotrypsin compared to the wild type, indicating that the absence of BBi enhances protein digestibility. Our study suggests that these BBi knockdown lines could be a valuable resource in order for plant breeders to incorporate this trait into commercial soybean cultivars, potentially enabling the use of raw soybeans in animal feed. Full article

The encapsulation of hydrophobic substances remains a significant challenge due to limitations such as low loading efficiency, leakage, and poor distribution within microcapsules. This study introduces a novel strategy utilizing colloidosomes assembled from polyelectrolyte microcapsules (PMCs). PMCs were fabricated via layer-by-layer (LbL) assembly on manganese carbonate (MnCO₃) or calcium carbonate (CaCO₃) cores, followed by core dissolution. A solvent gradient replacement method was employed to substitute the internal aqueous phase of PMCs with kerosene, enabling the formation of colloidosomes through self-assembly upon resuspension in water. Comparative analysis revealed that MnCO₃-based PMCs with smaller diameters (2.5–3 µm vs. 4.5–5.5 µm for CaCO₃) exhibited 3.5-fold greater stability, attributed to enhanced inter-capsule interactions via electrostatic and hydrophobic forces. Confocal microscopy confirmed the structural integrity of colloidosomes, featuring a liquid kerosene core encapsulated within a PMC shell. Temporal stability studies indicated structural degradation within 30 min, though 5% of colloidosomes retained integrity post-water evaporation. PMC-based colloidosomes exhibit significant application potential due to their integration of colloidosome functionality with PMC-derived structural features—semi-permeability, tunable shell thickness/composition, and stimuli-responsive behavior—enabling their adaptability to diverse technological and biomedical contexts. This innovation holds promise for applications in drug delivery, agrochemicals, and environmental technologies, where controlled release and stability are critical. The findings highlight the role of core material selection and solvent engineering in optimizing colloidosome performance, paving the way for advanced encapsulation systems. Full article

Introduction: Artificial intelligence (AI) is increasingly being applied to improve the diagnosis and management of inflammatory bowel disease (IBD). Aims and Methods: We conducted a narrative review of the literature on AI applications in IBD endoscopy, focusing on diagnosis, disease activity assessment, therapy prediction, and detection of dysplasia. Results: AI systems have demonstrated high accuracy in assessing endoscopic and histological disease activity in ulcerative colitis and Crohn’s disease, with performance comparable to expert clinicians. Machine learning models can predict response to biologics and risk of complications. AI-assisted technologies like confocal laser endomicroscopy enable real-time histological assessment. Computer-aided detection systems improve identification of dysplastic lesions during surveillance. Challenges remain, including need for larger datasets, external validation, and addressing potential biases. Conclusions: AI has significant potential to enhance IBD care by providing rapid, objective assessments of disease activity, predicting outcomes, and assisting in dysplasia surveillance. However, further validation in diverse populations and prospective studies are needed before widespread clinical implementation. With ongoing advances, AI is poised to become a valuable tool to support clinical decision-making and improve patient outcomes in IBD. Addressing methodological, regulatory, and cost barriers will be crucial for the successful integration of AI into routine IBD management. Full article

Taking the TPO waterproofing membrane as an example, this paper studies the influence of temperature, speed and welding pressure on the welding quality of a TPO waterproofing membrane lap area through a peel test and a water impermeability test, determines the optimal construction process, and observes and compares the permeable path through laser confocal microscope. Finally, it is applied to the actual effect test in the project. The results show that the welding pressure test tool for the lap area of the waterproofing membrane is designed to meet the welding work test requirements of various lap areas of the waterproofing membrane. The peel strength increases first and then decreases with the increase in welding temperature, and the optimal construction temperature is 400 °C. The optimal construction speed is 4 m/min; at 400 °C welding temperature, the peel strength increases first and then decreases slightly with the increase in welding pressure. The optimal construction pressure is 14.97 N; under the condition of 0.2 MPa, 30 min to 0.6 MPa, 120 min, the water impermeability test of the overlapping area was qualified. In this paper, the optimal construction technology of a TPO waterproofing membrane is determined, which provides guidance for its application and promotion in engineering. Full article

Lactiplantibacillus plantarum is a kind of common lactic acid bacteria, which plays an important role in the production of fermented foods. In general, the formation of biofilm is conducive to the adaptability of cells in the face of fierce competition and an increasingly harsh fermentation environment. In this work, optimum conditions for the formation of biofilm by L. plantarum were investigated, and scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) analysis showed the morphology of biofilm cells and 3D architecture of biofilm under different conditions, respectively. In addition, cells in the biofilms showed higher cell viability under heat stress, acid stress, and oxidative stress compared with planktonic cells. RNA-seq technology and TMT-based proteomic technology were employed to reveal the differential expression of profiles between biofilm cells and planktonic cells. The shelter provided by biofilm and the differential expression of genes and proteins involved in PTS, the TCA cycle, alanine, and teichoic acid biosynthesis may be involved in the formation of biofilm cells. The results presented in this study will help to understand the formation of biofilms in L. plantarum and regulate the industrial performance of cells in the food industry. Full article

This study is based on the laser-induced thermal-crack propagation (LITP) technology, focusing on the issues of deviation and thermal damage during the transverse crack propagation process, with the aim of achieving high-purity, non-destructive, and high-precision cutting of glass. A 50 W, 1064 nm fiber laser is used for S-pattern scanning cutting of soda–lime glass. A moving heat source model is established and analyzed via MATLAB R2022a numerical simulation. Combined with the ABAQUS 2019 software, the relationships among temperature field, stress field, crack propagation, and deviation during laser-induced thermal crack cutting are deeply explored. Meanwhile, laser thermal fracture experiments are also carried out. A confocal microscope detects glass surface morphology, cross-sectional roughness and hardness under different heat flux densities (HFLs), determining the heat flux density threshold affecting the glass surface quality. Through a comprehensive study of theory, simulation, and experiments, it is found that with an increase in the HFL value of the material, the laser-induced thermal crack propagation can be divided into four stages. When the heat flux density value is in the range of 47.2 to 472 W/m², the glass substrate has good cross-sectional characteristics. There is no ablation phenomenon, and the surface roughness of the cross-section is lower than 0.15 mm. The hardness decreases by 9.19% compared with the reference value. Full article

During the manufacturing of precision optical elements, subsurface defects seriously affect the performance of the elements, leading to the enhancement of light fields, an increase in laser absorption and an decrease in mechanical properties. It has become a key technology to realize the high-precision quantitative automatic detection of subsurface defects of optical elements. This paper presents a method of subsurface defect detection based on spectral confocal scattering measurement, the system adopts a dispersive lens group with the working band of 480–670 nm, and combines the spectral confocal technology and total internal reflection technology to effectively suppress the interference of scattered light on the surface, and can realize high-precision nondestructive detection without fluorescent substances. The axial resolution of this method is 0.8 μm and the measuring depth range is 0.94 mm. By building a measurement system and carrying out experimental verification, the results show that this method can accurately measure the depth and location of subsurface defects and confirm its feasibility and effectiveness. Full article

Polyomaviruses have the potential to cause significant morbidity not only in transplant medicine, but also in other forms of disease or variants of immunosuppression. In kidney transplant recipients or recipients of human stem cell transplants, the BK-Virus is the major proponent of manifestations such as BKPyV-associated nephropathy or hemorrhagic cystitis. As no polyomavirus-specific drug with proven in vivo effects has been developed so far, methods to screen for such drugs are important. This work describes the establishment of a virus-secreting cell line. By infecting a pre-established monkey kidney cell line (COS-1) with a non-rearranged human BK polyomavirus isolated from a kidney transplant patient suffering from BKPyV-associated nephropathy, a continuously replicating cell type with consistent virus secretion could be established and was termed COSSA. Measurements of BKPyV replication, virion production, and secretion were performed both intracellularly and in the cell supernatant. Viral proteins such as VP1 and LTAg were accurately tracked by confocal microscopy, as well as by immunoblot and qPCR. An intracellular flow cytometry (FACS) assay detecting VP1 protein was established and revealed an expanded range of positive intracellular signals. The viruses produced proved to be infectious in human tubular epithelial cell lines. Long-range sequencing of the COSSA genome using Oxford Nanopore Technology revealed a total of five distinct BKPyV integration events. One integration of a partial BKPyV genome was located upstream of the epidermal growth factor receptor gene. The second and third, both truncated forms of integration, were close to histocompatibility gene locuses, while the fourth was characterized by a ninefold and the fifth by a fourfold tandem repeat of the BKPyV genome. From both of the repeat forms, virus replicates were derived showing deletions/duplications on early and late genes and inversions within the non-coding control region (NCCR). This pattern of repetitive viral genome integration is a potential key driver of enhanced viral replication and increased virion assembly, ultimately supporting efficient virus egress. Quantitative PCR analysis confirmed the release of approximately 10⁸/mL viral units per 48 h from 2 × 10⁵ COSSA cells into the culture supernatant. Notably, the NCCR region of the most frequent copies of circular virus and the integrated tetrameric tandem repeat exhibited a rearranged configuration, which may contribute to the observed high replication dynamics. The establishment of a consistent methodology to generate and secrete BKPyV from a cell line is expected to significantly facilitate antiviral drug development. Full article

Current hydrogels used for cartilage tissue engineering often lack the mechanical strength and structural integrity required to mimic native human cartilage. This study addresses this limitation by developing reinforced hydrogels based on a ternary polymer blend of poly(vinyl) alcohol (PVA), gelatin (GL), and chitosan (CH), with gentamicin sulfate (GS) as an antimicrobial agent and a crosslinker. The hydrogels were produced using two crosslinking methods, the freeze/thaw and heated cycles, and reinforced with forcespun polycaprolactone (PCL) nanofiber to improve mechanical performance. Chemical characterization revealed that GS forms weak hydrogen bonds with the ternary polymers, leading to esterification with PVA, and covalent bonds are formed as the result of the free amino group (-NH₂) of chitosan that reacts with the carboxylic acid group (-COOH) of gelatin. SEM images help us to see how the hydrogels are reinforced with polycaprolactone (PCL) fibers produced via force spinning technology, while mechanical properties were evaluated via uniaxial tensile and compressive tests. Water retention measurements were performed to examine the crosslinking process’s influence on the hydrogel’s water retention, while the hydrogel surface roughness was obtained via confocal microscopy images. A constitutive model based on non-Gaussian strain energy density was introduced to predict experimental mechanical behavior data of the hydrogel, considering a non-monotonous softening function. Loading and unloading tests demonstrated that GS enhanced crosslinking without compromising water retention or biocompatibility because of the reaction between the free amino group of CH and the carboxylic group of gelatin. The PCL-reinforced PVA/GL/CH hydrogel shows strong potential for cartilage repair and tissue engineering applications. Full article

Robot-assisted surgery has transformed the landscape of genitourinary cancer treatment, offering enhanced precision, reduced morbidity, and improved recovery compared to open or conventional laparoscopic approaches. As the field matures, a new generation of technological innovations is redefining the boundaries of what robotic systems can achieve. This narrative review explores the integration of artificial intelligence, advanced imaging modalities, augmented reality, and connectivity in robotic urologic oncology. The applications of machine learning in surgical skill evaluation and postoperative outcome predictions are discussed, along with AI-enhanced haptic feedback systems that compensate for the lack of tactile sensation. The role of 3D virtual modeling, intraoperative augmented reality, and fluorescence-guided surgery in improving surgical planning and precision is examined for both kidney and prostate procedures. Emerging tools for real-time tissue recognition, including confocal microscopy and Raman spectroscopy, are evaluated for their potential to optimize margin assessment. This review also addresses the shift toward single-port systems and the rise of telesurgery enabled by 5G connectivity, highlighting global efforts to expand expert surgical care across geographic barriers. Collectively, these innovations represent a paradigm shift in robot-assisted urologic oncology, with the potential to enhance functional outcomes, surgical safety, and access to high-quality care. Full article

Molecular endoscopy represents a transformative advance in the detection, diagnosis, and management of gastrointestinal diseases, addressing the critical limitations of conventional techniques. Current diagnostic standards, such as white light endoscopy (WLE), often fail to detect early-stage lesions, particularly in high-risk populations like Barrett’s esophagus or inflammatory bowel disease patients. To overcome these challenges, molecular endoscopy, using fluorescent molecular probes, may offer ultimate precision by targeting disease-specific biomarkers. Technologies like Confocal Laser Endomicroscopy (CLE) and Immunoendoscopy are revolutionizing in vivo diagnostics, enabling the real-time visualization of tissue microarchitecture and physiological mechanisms. Fluorescence molecular endoscopy (FME) enhances the detection of precancerous and cancerous lesions, even those undetectable by conventional methods, by highlighting subtle molecular changes. Clinical applications include early tumor detection, therapy response monitoring, and improved lesion characterization. Despite these advancements, challenges persist, including high costs, a lack of standardization, and the need for specialized training. Recent innovations, such as a multi-parametric rigid standard, aim to ensure the reliable performance assessment and quality control of FME systems, addressing subjective variability and improving reproducibility. In addition, the integration of artificial intelligence (AI) with molecular endoscopy offers the potential to further reduce detection errors and significantly enhance diagnostic accuracy. This advancement underscores the potential of molecular endoscopy for personalized GI disease management, while highlighting the need for ongoing research to refine the technology, validate its clinical utility, and overcome the barriers to routine clinical application. Full article