Search Results (241)

Titanium alloys are frequently subjected to surface treatments to enhance their biocompatibility and corrosion resistance in biological environments. Plasma electrolytic oxidation (PEO) is an environmentally friendly electrochemical technique capable of forming oxide layers characterized by high corrosion resistance, biocompatibility, and strong adhesion to the substrate. In this study, the PEO process was performed using a low-melting-point ternary eutectic electrolyte composed of Ca(NO₃)₂–NaNO₃–KNO₃ (41–17–42 wt.%) with the addition of ammonium dihydrogen phosphate (ADP). The use of this electrolyte system enables a reduction in the operating temperature from 280 to 160 °C. The effects of applied voltage from 200 to 400V, current frequency from 50 to 1000 Hz, and ADP concentrations of 0.1, 0.5, 1, 2, and 5 wt.% on the growth of titanium oxide composite coatings on a Ti-6Al-4V substrate were investigated. The incorporation of Ca and P was confirmed by phase and chemical composition analysis, while scanning electron microscopy (SEM) revealed a porous surface morphology typical of PEO coatings. Corrosion resistance in Hank’s solution, evaluated via Tafel plot fitting of potentiodynamic polarization curves, demonstrated a substantial improvement in electrochemical performance of the PEO-treated samples. The corrosion current decreased from 552 to 219 nA/cm², and the corrosion potential shifted from −102 to 793 mV vs. the Reference Hydrogen Electrode (RHE) compared to the uncoated alloy. These findings indicate optimal PEO processing parameters for producing composite oxide coatings on Ti-6Al-4V alloy surfaces with enhanced corrosion resistance and potential bioactivity, which are attributed to the incorporation of Ca and P into the coating structure. Full article

The contamination of drinking water sources with selenium (Se) oxyanions, including selenite (Se(IV)) and selenate (Se(VI)), contains serious health hazards with an oral intake exceeding 400 µg/day and therefore requires urgent attention. Various natural and anthropogenic sources are responsible for high Se concentrations in aquatic environments. In addition, the chemical behavior and speciation of selenium can vary noticeably depending on the origin of the source water. The Se(VI) oxyanion is more soluble and therefore more abundant in surface water. Se levels in contaminated waters often exceed 50 µg/L and may reach several hundred µg/L, well above drinking water limits set by the World Health Organization (40 µg/L) and Germany (10 µg/L), as well as typical industrial discharge limits (5–10 µg/L). Overall, Se is difficult to remove using conventionally available physical, chemical, and biological treatment technologies. The recent literature has therefore highlighted promising advancements in Se removal using emerging technologies. These include advanced physical separation methods such as membrane-based treatment systems and engineered nanomaterials for selective Se decontamination. Additionally, other integrated approaches incorporating photocatalysis coupled adsorption processes, and bio-electrochemical systems have also demonstrated high efficiency in redox transformation and capturing of Se from contaminated water bodies. These innovative strategies may offer enhanced selectivity, removal, and recovery potential for Se-containing species. Here, a current review outlines the sources, distribution, and chemical behavior of Se in natural waters, along with its toxicity and associated health risks. It also provides a broad and multi-perspective assessment of conventional as well as emerging physical, chemical, and biological approaches for Se removal and/or recovery with further prospects for integrated and sustainable strategies. Full article

Nafion has long been recognized as the gold standard for proton exchange membranes, due to its exceptional ion exchange capacity and its advanced performance in chemically aggressive environments. In recent years, a growing body of evidence has demonstrated that Nafion is equally well-suited in complex biological conditions owing to its structural robustness, responsive functionality and intrinsic biocompatibility. These characteristics have enabled its transition into the biomedical and healthcare sectors, where it is currently being explored for a diverse and expanding range of applications. To that end, Nafion has been systematically investigated as a key component in bioelectronic systems for energy harvest, sensors, wearable electronics, tissue engineering, lab-on-a-chip platforms, implants, controlled drug delivery systems and antimicrobial surface coatings. This review examines the distinctive structural and electrochemical characteristics that underpin Nafion’s performance in these biomedical contexts, provides an overview of recent advancements, emphasizes critical performance metrics and highlights the material’s growing potential to shape the future of biomedical technology. Full article

As critical interfaces bridging biological systems and electronic devices, the performance of bioelectrodes directly determines the sensitivity, selectivity, and reliability of biosensors. Recent advancements in functional nanomaterials (e.g., carbon nanomaterials, metallic nanoparticles, 2D materials) have substantially enhanced the application potential of bioelectrodes in disease detection, metabolic monitoring, and early diagnosis through strategic material selection, structural engineering, interface modification, and antifouling treatment. This review systematically examines the latest progress in nanomaterial-enabled interface design of bioelectrodes, with particular emphasis on performance enhancements in electrophysiological/electrochemical signal acquisition and multimodal sensing technologies. We comprehensively analyze cutting-edge developments in dynamic metabolic parameter monitoring for chronic disease management, as well as emerging research on flexible, high-sensitivity electrode interfaces for early disease diagnosis. Furthermore, this work focused on persistent technical challenges regarding nanomaterial biocompatibility and long-term operational stability while providing forward-looking perspectives on their translational applications in wearable medical devices and personalized health management systems. The proposed framework offers actionable guidance for researchers in this interdisciplinary field. Full article

Electrochemical sensors, particularly those based on ion transfer at the interface between two immiscible electrolyte solutions (ITIES), offer significant advantages such as high selectivity, ease of fabrication, and cost effectiveness for toxic metal ion detection. However, distinguishing between cyclic voltammograms (CVs) of analytes with closely spaced half-wave potentials, such as Cd²⁺ and Cu²⁺, remains a challenge, especially for non-expert users. In this work, we present a novel methodology that integrates advanced artificial intelligence (AI) models with ITIES-based sensing to automate and enhance metal ion detection. Our approach first employed a convolutional neural network to classify CVs as either ideal or faulty with an accuracy exceeding 95 percent. Ideal CVs were then further analyzed for metal ion identification, achieving a classification accuracy of 99.15 percent between Cd²⁺ and Cu²⁺ responses. Following classification, an artificial neural network was used to quantitatively predict metal ion concentrations, yielding low mean absolute errors of 0.0158 for Cd²⁺ and 0.0127 for Cu²⁺. This integrated AI–ITIES system not only provides a scientific methodology for differentiating analyte responses based on electrochemical signatures but also substantially lowers the expertise barrier for sensor signal interpretation. To our knowledge, this is the first report of the AI-assisted differentiation and quantification of metal ions from ITIES-based CVs, establishing a robust framework for the future development of user-friendly, automated electrochemical sensing platforms for environmental and biological applications. Full article

DNA methylation, as a critical epigenetic modification, plays a central role in gene regulation and has emerged as a powerful biomarker for early disease diagnostics, particularly in cancer. Owing to the limitations of traditional bisulfite sequencing—such as high cost, complexity, and chemical degradation—electrochemical biosensors have gained substantial attention as promising alternatives. This review summarizes recent advancements in electrochemical platforms for bisulfite-free detection of DNA methylation, encompassing direct oxidation strategies, enzyme-assisted recognition (e.g., restriction endonucleases and methyltransferases), immunoaffinity-based methods, and a variety of signal amplification techniques such as rolling circle amplification and catalytic hairpin assembly. Additional approaches, including strand displacement, magnetic enrichment, and adsorption-based detection, are also discussed. These systems demonstrate exceptional sensitivity, often down to the attomolar or femtomolar level, as well as high selectivity, reproducibility, and suitability for real biological matrices. The integration of nanomaterials and redox-active probes further enhances analytical performance. Importantly, many of these biosensing platforms have been validated using clinical samples, reinforcing their translational relevance. The review concludes by outlining current challenges and future directions, emphasizing the potential of electrochemical biosensors as scalable, cost-effective, and minimally invasive tools for real-time epigenetic monitoring and early-stage disease diagnostics. Full article

The transition toward sustainable and decentralized energy solutions necessitates the development of innovative bioelectronic systems capable of harvesting and converting renewable energy. Here, we present a novel photo-bioelectrochemical fuel cell architecture based on a biohybrid anode integrating laser-induced graphene (LIG), poly(3,4-ethylenedioxythiophene) (PEDOT), and isolated thylakoid membranes. LIG provided a porous, conductive scaffold, while PEDOT enhanced electrode compatibility, electrical conductivity, and operational stability. Compared to MXene-based systems that involve complex, multi-step synthesis, PEDOT offers a cost-effective and scalable alternative for bioelectrode fabrication. Thylakoid membranes were immobilized onto the PEDOT-modified LIG surface to enable light-driven electron generation. Electrochemical characterization revealed enhanced redox activity following PEDOT modification and stable photocurrent generation under light illumination, achieving a photocurrent density of approximately 18 µA cm⁻². The assembled photo-bioelectrochemical fuel cell employing a gas diffusion platinum cathode demonstrated an open-circuit voltage of 0.57 V and a peak power density of 36 µW cm⁻² in 0.1 M citrate buffer (pH 5.5) under light conditions. Furthermore, the integration of a charge pump circuit successfully boosted the harvested voltage to drive a low-power light-emitting diode, showcasing the practical viability of the system. This work highlights the potential of combining biological photosystems with conductive nanomaterials for the development of self-powered, light-driven bioelectronic devices. Full article

In this study, the ranking of the multifaceted activity of rutin (Ru), quercetin (Q), and quercetin’s glucosides (Q3G, Q4′G and Q3,4′G) was addressed. The antioxidant potency was determined by electrochemical methods, whereas the ability of these compounds to inhibit angiotensin-converting enzyme (ACE) activity, acetylcholinesterase (AChE) activity, and advanced glycation endproduct (AGE) formation was examined in bovine serum albumin (BSA)/glucose and BSA/methylglyoxal (MGO) model systems to show their importance against hypertension, Alzheimer-type dementia, and diabetic complication, respectively. Then, the relationship between the biological activities of these compounds and their antioxidant potential provided by the cyclic voltammetry (CV) method was evaluated. The ranking of the ACE inhibitory activity was Q > Q3,4′G > Ru > Q3G > Q4′G. The correlation coefficient between ACE enzyme inhibitory activities and antioxidant potentials had a value of r = −0.68, thus clearly indicating the impact of antioxidant potential and chemical structure on ACE inhibitory activity. The ranking of the AChE enzyme inhibitory activity was Q ≈ Q3G ≈ Q4′G ≈ Ru > Q3,4′G, and the correlation between their antioxidant potentials and AChE inhibitory activities (r = −0.77) also indicated the impact of chemical structure. The quercetin glucosides displayed strong inhibitory capacity on AGE formation, as the ranking of anti-AGE activity in the BSA/MGO model system was Q3,4′G ≈ Q4′G ≈ Q3G > Ru ≈ Q > AG. The anti-AGE activity of rutin, quercetin, and quercetin’s glucosides was negatively correlated with their IC₅₀ values for ACE inhibition (r = −0.67) and AChE inhibition (r = −0.81), whereas no correlation was found between their ACE and AChE inhibition activities. These effects of rutin, quercetin, and quercetin’s glucosides expand our knowledge of the multifunctional activity of biologically active compounds of plant origin. Full article

This study explores the feasibility of producing biohydrogen from winery wastewater using a dual-chamber microbial electrolysis cell (MEC). A mixed microbial consortium pre-adapted to heavy-metal environments and enriched with Geobacter sulfurreducens was anaerobically cultivated from diverse waste streams. Over 5000 h of development, the MEC system was progressively adapted to winery wastewater, enabling long-term electrochemical stability and high organic matter degradation. Upon winery wastewater addition (5% v/v), the system achieved a sustained hydrogen production rate of (0.7 ± 0.3) L H₂ L⁻¹ d⁻¹, with an average current density of (60 ± 4) A m⁻³, and COD removal efficiency exceeding 55%, highlighting the system’s resilience despite the presence of inhibitory compounds. Coulombic efficiency and cathodic hydrogen recovery reached (75 ± 4)% and (87 ± 5)%, respectively. Electrochemical impedance spectroscopy provided mechanistic insight into charge transfer and biofilm development, correlating resistive parameters with biological adaptation. These findings demonstrate the potential of MECs to simultaneously treat agro-industrial wastewaters and recover energy in the form of hydrogen, supporting circular resource management strategies. Full article

Promethazine hydrochloride (PMH) is a first-generation antipsychotic drug created from phenothiazine derivatives that is widely employed to treat psychiatric disorders in human healthcare systems. However, an overdose or long-term intake of PMH can lead to severe health issues in humans. Hence, establishing a sensitive, accurate, and efficient detection approach to detect PMH in human samples is imperative. In this study, we designed orthorhombic copper molybdate microspheres decorated on reduced graphene oxide (Cu₃Mo₂O₉/RGO) composite via the effective one-pot hydrothermal method. The structural and morphological features of the designed hybrid were studied using various spectroscopic methods. Subsequently, the electrochemical activity of the composite-modified screen-printed carbon electrode (Cu₃Mo₂O₉/RGO/SPCE) was assessed by employing voltammetric methods for PMH sensing. Owing to the uniform composition and structural benefits, the combination of Cu₃Mo₂O₉ and RGO has not only improved electrochemical properties but also enhanced the electron transport between PMH and Cu₃Mo₂O₉/RGO. As a result, the Cu₃Mo₂O₉/RGO/SPCE exhibited a broad linear range of 0.4–420.8 µM with a low limit of detection (LoD) of 0.015 µM, highlighting excellent electrocatalytic performance to PMH. It also demonstrated good cyclic stability, reproducibility, and selectivity in the presence of chlorpromazine and biological and metal compounds. Furthermore, the Cu₃Mo₂O₉/RGO/SPCE sensor displayed satisfactory recoveries for real-time monitoring of PMH in human urine and serum samples. This study delivers a promising electrochemical sensor for the efficient analysis of antipsychotic drug molecules. Full article

Glu-Phe-Asp (GFD) proteinoids represent a class of synthetic polypeptides capable of self-assembling into microspheres, fibres, or combinations thereof, with morphology dramatically influencing their electrical properties. Extended recordings and detailed waveforms demonstrate that microspheres generate rapid, nerve-like spikes, while fibres exhibit consistent and gradual variations in voltage. Mixed networks integrate multiple components to achieve a balanced output. Electrochemical measurements show clear differences. Microspheres have a low capacitance of $1.926\pm 5.735$$\mathsf{\mu }$F. They show high impedance at $6646.282\pm 178.664$ Ohm. Their resistance is low, measuring 15,830.739 ± 652.514 m$\mathsf{\Omega }$. This structure allows for quick ionic transport, leading to spiking behaviour. Fibres show high capacitance ($9.912\pm 0.171$$\mathsf{\mu }$F) and low impedance ($209.400\pm 0.286$ Ohm). They also have high resistance (163,067.613 ± 9253.064 m$\mathsf{\Omega }$). This combination helps with charge storage and slow potential changes. The 50:50 mixture shows middle values for all parameters. This confirms that hybrid electrical properties have emerged. The differences come from basic structural changes. Microspheres trap ions in small, round spaces. This allows for quick release. In contrast, fibers spread ions along their length. This leads to slower wave propagation. In mixed systems, diverse voltage zones emerge, suggesting cooperative dynamics between morphologies. This electrical polymorphism in simple proteinoid systems may explain complexity in biological systems. This study shows that structural polymorphism in GFD proteinoids affects their electrical properties. This finding is significant for biomimetic computing and sheds light on prebiotic information-processing systems. Full article

Over the last nine decades, 2,2′:6′,2″-terpyridine (terpy) derivatives and their transition d-metal complexes have been extensively explored due to their unique and widely tuned optical, electrochemical, and biological properties. Terpyridyl transition metal complexes occupy a prominent position among functional molecular materials for applications in optoelectronics, life science, catalysis, and photocatalysis, as well as they have played a key role in determining structure–property relationships. This review summarizes the developments of amine-functionalized R-C₆H₄-terpy systems and their d-metal complexes, largely concentrating on their photophysical and electrochemical properties. Functionalization of the terpy core with the electron-rich group, attached to the central pyridine ring of the terpy backbone via the phenylene linker, gives rise to organic push–pull systems showing the photoinduced charge flow process from the peripheral donor substituent to the terpy acceptor. The introduction of amine-functionalized R-C₆H₄-terpy systems into the coordination sphere of a d-metal ion offers an additional way for controlling the photophysics of these systems, in agreement with the formation of the excited state of intraligand charge transfer (ILCT) nature. Within this review, a detailed discussion has been presented for R-C₆H₄-terpys modified with acyclic and cyclic amine groups and their Cr(III), Mn(I), Re(I), Fe(II), Ru(II), Os(II), Pt(II), and Zn(II) coordination compounds. Full article

Bimetals—materials composed of two metal components with dissimilar standard reduction–oxidation (redox) potentials—offer unique electronic, optical, and catalytic properties, surpassing monometallic systems. These materials exhibit not only the combined attributes of their constituent metals but also new and novel properties arising from their synergy. Although many reviews have explored the synthesis, properties, and applications of bimetallic systems, none have focused exclusively on iron (Fe)- and aluminum (Al)-based bimetals. This systematic review addresses this gap by providing a comprehensive overview of conventional and emerging techniques for Fe-based and Al-based bimetal synthesis. Specifically, this work systematically reviewed recent studies from 2014 to 2023 using the Scopus, Web of Science (WoS), and Google Scholar databases, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, and was registered under INPLASY with the registration number INPLASY202540026. Articles were excluded if they were inaccessible, non-English, review articles, conference papers, book chapters, or not directly related to the synthesis of Fe- or Al-based bimetals. Additionally, a bibliometric analysis was performed to evaluate the research trends on the synthesis of Fe-based and Al-based bimetals. Based on the 122 articles analyzed, Fe-based and Al-based bimetal synthesis methods were classified into three types: (i) physical, (ii) chemical, and (iii) biological techniques. Physical methods include mechanical alloying, radiolysis, sonochemical methods, the electrical explosion of metal wires, and magnetic field-assisted laser ablation in liquid (MF-LAL). In comparison, chemical protocols covered reduction, dealloying, supported particle methods, thermogravimetric methods, seed-mediated growth, galvanic replacement, and electrochemical synthesis. Meanwhile, biological techniques utilized plant extracts, chitosan, alginate, and cellulose-based materials as reducing agents and stabilizers during bimetal synthesis. Research works on the synthesis of Fe-based and Al-based bimetals initially declined but increased in 2018, followed by a stable trend, with 50% of the total studies conducted in the last five years. China led in the number of publications (62.3%), followed by Russia, Australia, and India, while Saudi Arabia had the highest number of citations per document (95). RSC Advances was the most active journal, publishing eight papers from 2014 to 2023, while Applied Catalysis B: Environmental had the highest number of citations per document at 203. Among the three synthesis methods, chemical techniques dominated, particularly supported particles, galvanic replacement, and chemical reduction, while biological and physical methods have started gaining interest. Iron–copper (Fe/Cu), iron–aluminum (Fe/Al), and iron–nickel (Fe/Ni) were the most commonly synthesized bimetals in the last 10 years. Finally, this work was funded by DOST-PCIEERD and DOST-ERDT. Full article

Conductive hydrogels, particularly those incorporating poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS), have revolutionized wearable health monitoring by merging tissue-like softness with robust electronic functionality. This review systematically explores design strategies for PEDOT:PSS-based hydrogels, focusing on advanced gelation methods, including polymer crosslinking, ionic interactions, and light-induced polymerization, to engineer hierarchical networks that balance conductivity and mechanical adaptability. Cutting-edge fabrication techniques such as electrochemical patterning, additive manufacturing, and laser-assisted processing further enable precise microstructural control, enhancing interfacial compatibility with biological systems. The applications of these hydrogels in wearable sensors are highlighted through their capabilities in real-time mechanical deformation tracking, dynamic tissue microenvironment analysis, and high-resolution electrophysiological signal acquisition. Environmental stability and long-term durability are critical for ensuring reliable operation under physiological conditions and mitigating performance degradation caused by fatigue, oxidation, or biofouling. By addressing critical challenges in environmental stability and long-term durability, PEDOT:PSS hydrogels demonstrate transformative potential for personalized healthcare, where their unique combination of softness, biocompatibility, and tunable electro-mechanical properties enables seamless integration with human tissues for continuous, patient-specific physiological monitoring. These systems offer scalable solutions for multi-modal diagnostics, empowering tailored therapeutic interventions and chronic disease management. The review concludes with insights into future directions, emphasizing the integration of intelligent responsiveness and energy autonomy to advance next-generation bioelectronic interfaces. Full article

Nephrolithiasis (kidney stone disease) continues to pose a significant global health challenge, affecting millions of individuals and placing substantial economic pressures on healthcare systems. Traditional diagnostic methods—such as computed tomography (CT), ultrasound, and basic urinalysis—are often limited by issues including radiation exposure, lower sensitivity in detecting small stones, operator dependency, and the inability to provide real-time analysis. In response, electrochemical sensors have emerged as innovative and powerful tools capable of the rapid, sensitive, and specific detection of key biomarkers associated with nephrolithiasis. This review highlights the advances in electrochemical approaches for monitoring oxalate and uric acid, the two primary metabolites implicated in kidney stone formation. We discuss the principles of electrode design and fabrication, including nanomaterial integration, 3D printing, and molecular imprinting, which have markedly improved detection limits and selectivity. Furthermore, we critically evaluate the practical challenges—such as sensor fouling, reproducibility, and stability in complex biological matrices—that currently impede widespread clinical implementation. The potentials for miniaturization and point-of-care integration are emphasized, with an eye toward continuous or home-based monitoring systems that can offer personalized insights into risk of stone formation and progression. By consolidating recent findings and exploring future trends in multi-analyte detection and wearable diagnostics, this review provides a roadmap for translating electrochemical sensors from research laboratories to routine clinical practice, ultimately aiming to enhance early intervention and improve patient outcomes in nephrolithiasis. Full article