Search Results (481)

In recent years, active packaging has become a focal point of research and development in the food industry, driven by increasing consumer demand for safe, high-quality, and sustainable food products. In this work, solvent casting processed an active antibacterial multicomponent film based on hydroxypropyl methylcellulose incorporated with ferulic acid and chitin nanofibers. The influences of ferulic acid and different content of chitin nanofibers on the structure, thermal, mechanical, and water vapor stability and antioxidant and antibacterial efficiency of films were studied. It was shown that the inclusion of only ferulic acid did not significantly influence the mechanical, water vapor, and thermal stability of films. In addition, films containing only ferulic acid did not display antibacterial activity. The optimal concentration of chitin nanofibers in hydroxypropyl methylcellulose–ferulic acid films was 5 wt%, providing a tensile strength of 15 MPa, plasticity of 52%, and water vapor permeability of 0.94 × 10⁻⁹ g/m s Pa. With further increase of chitin nanofibers content, films with layered and discontinuous phases are obtained, which negatively influence tensile strength and water vapor permeability. Moreover, only films containing both ferulic acid and chitin nanofibers demonstrated antibacterial activity toward E. coli and S. aureus, suggesting that the presence of fibers allows easier release of ferulic acid from the matrix. These results imply that the investigated three-component systems have potential applicability as sustainable active food packaging materials. Full article

Moringa oleifera (MO), a nutritionally and pharmacologically potent species, is emerging as a sustainable candidate for applications across bioenergy, agriculture, textiles, pharmaceuticals, and biomedicine. This review explores recent advances in MO-based biotechnologies, highlighting novel extraction methods, green nanotechnology, and clinical trial findings. Although MO’s resilience offers promise for climate-smart agriculture and public health, challenges remain in standardizing cultivation and verifying therapeutic claims. This work underscores MO’s translational potential and the need for integrative, interdisciplinary research. MO is used in advanced materials, like electrospun fibers and biopolymers, showing filtration, antibacterial, anti-inflammatory, and antioxidant properties—important for the biomedical industry and environmental remediation. In textiles, it serves as an eco-friendly alternative for wastewater treatment and yarn sizing. Biotechnological advancements, such as genome sequencing and in vitro culture, enhance traits and metabolite production. MO supports green biotechnology through sustainable agriculture, nanomaterials, and biocomposites. MO shows potential for disease management, immune support, metabolic health, and dental care, but requires further clinical trials for validation. Its resilience is suitable for land restoration and food security in arid areas. AI and deep learning enhance Moringa breeding, allowing for faster, cost-effective development of improved varieties. MO’s diverse applications establish it as a key element for sustainable development in arid regions. Full article

In this work, the electrospinning technique was used to prepare novel polymeric composite fibers containing Te-doped bioactive glass powders. Bioactive glass powders containing tellurium (STe5 glass) were chosen as fillers for the composites, owing to their bioactive, antibacterial, and antioxidant properties. The biopolymer poly (ϵ-caprolactone) (PCL) and acetic acid (AA) were used as raw materials for the preparation of the polymeric matrix. FESEM analysis confirmed a good incorporation of the glass powders in the polymeric fibers, of up to 20% by weight. Wettability, mechanical, in vitro stability and preliminary antibacterial tests were also performed. The results showed that the treatment in AA did not affect the bioactivity of the glass powders, the presence of STe5 powders in PCL enhanced the wettability of the fibers, and mechanical properties improved by increasing the amount of STe5 powders, as well as the antibacterial effect. Therefore, the obtained materials appear promising for developing multifunctional composite materials for applications in tissue engineering. Full article

A novel polyester/graphene nanocomposite fiber was produced using the in situ polymerization protocol with carboxylated graphene and melt spinning technology. The resulting nanocomposite fibers were characterized by X-ray diffraction (XRD), Raman spectroscopy, differential scanning calorimeter (DSC), and scanning electron microscope (SEM). The fibers containing 0.2 wt% graphene fraction showed an excellent dispersity of graphene nanosheets in polymeric matrix. DSC test showed that the efficient polymer-chain grafting depresses the crystallization of PET chains. This graphene-contained PET fabric exhibited attractive antibacterial properties that can be employed in fruit preservation to ensure food safety. Full article

The marine seaweed Undaria pinnatifida belongs to the large group of brown macroalgae (Ochrophyta) and is valued both as a nutritious food and a source of pharmaceutical compounds. It has been widely consumed in East Asia as part of the traditional diet and is generally regarded as a “healthy longevity food.” Consequently, it represents one of the most promising natural sources of biomedicinal and bioactive products. This review aims to synthesize current scientific evidence on the pharmacologically active compounds of U. pinnatifida, emphasizing their mechanisms of action and therapeutic potential in neurodegenerative and chronic diseases. This narrative review is based on a comprehensive literature search of peer-reviewed articles from scientific databases, focusing on studies addressing the pharmacological properties of U. pinnatifida and its major bioactive constituents. Recent research highlights that compounds such as fucoxanthin (a carotenoid), fucosterol (a sterol), fucoidan (a polysaccharide), alginate, and dietary fiber found in U. pinnatifida possess significant potential for developing treatments for conditions including goitre, urinary diseases, scrofula, dropsy, stomach ailments, and hemorrhoids. Moreover, these compounds exhibit remarkable pharmacological properties, including immunomodulation, antitumor, antiviral, antioxidant, antidiabetic, anti-inflammatory, anticoagulant, antithrombotic, and antibacterial activities, all with low toxicity and minimal side effects. Additionally, U. pinnatifida shows promise in the treatment or prevention of neurodegenerative diseases such as Alzheimer’s and Parkinson’s, as well as neuropsychiatric conditions like depression, supported by its antioxidant effects against oxidative stress and neuroprotective activities. Numerous in vitro and in vivo studies have confirmed that U. pinnatifida polysaccharides (UPPs), particularly fucoidans, exhibit significant biological activities. Thus, accumulating evidence positions UPPs as promising therapeutic agents for a variety of diseases. Full article

Globally, the proportion of the consumption of fruits in the human diet shows an increasing trend. However, fruits may incur significant losses during the post-harvest storage and transportation process due to metabolic activities and mechanical damage. Post-harvest coating technology has been proven to be an effective means of reducing quality loss, and it offers the advantages of being environmentally friendly, energy-efficient, and free of chemical residues. This article begins with an introduction to the three main mechanisms of coating preservation, including physical barrier effects, physiological metabolism regulation, and antibacterial and antioxidant effects. Secondly, this paper comprehensively reviews the latest progress of coating application technology in the field of fruit preservation, and summarizes the development of coating application technology in recent years, which is divided into two categories: traditional technology and fiber coating formation technology. Among these, the spraying method in traditional technology and microfluidic spinning technology in fiber coating formation technology are emphasized. This information will help to further develop coating application techniques to improve post-harvest fruit preservation. Full article

The growing antimicrobial resistance and the increasing environmental concerns associated with conventional antibacterial agents have prompted a search for more effective and sustainable alternatives. Biopolymer-based nanofibers are promising candidates to produce environment-friendly antibacterial coatings, owing to their high surface-to-volume ratio, structural adaptability, and tunable porosity. These features make them particularly well-suited for delivering antimicrobial agents in a controlled manner and for physically modifying the surface of medical devices. This review critically explores recent advances in the use of electrospun fibers enhanced with natural antimicrobial agents as eco-friendly surface coatings. The mechanisms of antibacterial action, key factors affecting their efficacy, and comparisons with conventional antibacterial agents are discussed herein. Emphasis is placed on the role of a “green electrospinning” process, which utilizes bio-based materials and nontoxic solvents, to enable coatings able to better combat antibiotic-resistant pathogens. Applications in various clinical settings, including implants, wound dressings, surgical textiles, and urinary devices, are explored. Finally, the environmental benefits and prospects for the scalability and sustainability of green coatings are discussed to underscore their relevance to next-generation, sustainable solutions in healthcare. Full article

Members of the Apiaceae family have been recognized since antiquity for their health-promoting properties. The halophytic species Crithmum maritimum L. (commonly known as sea fennel) has been used in traditional medicine since antiquity, largely due to its diverse and bioactive phytochemical composition. The plant’s complex chemical composition includes terpenoids, phenolic acids, flavonoids, tannins, dietary fibers, fatty acids, and essential vitamins. Essential oils (EOs) extracted from C. maritimum L. have demonstrated a wide range of biological activities, including antibacterial, antifungal, anti-inflammatory, antioxidant, and anticancer effects. Moreover, recent evidence suggests additional biofunctional roles such as cognitive enhancement and the inhibition of melanin synthesis in the skin. Extracts of the plant exhibit significant bioactivity, having shown antiparasitic, hypoglycemic, vasodilatory, and probiotic effects in preliminary studies. Despite this pharmacological potential, the number of experimental studies (particularly in vivo investigations) remains limited. The present review consolidates existing in vitro and in vivo research on C. maritimum L. with an analysis of 79 scientific studies aimed at elucidating its therapeutic potential and identifying future research directions necessary to support its broader application in biomedical and functional food contexts. Full article

Background/Objectives: The effect of fusidic acid on oral bacteria, especially on Gram- negative periodontopathogenic species, has not yet been investigated. This in vitro study aimed to analyze the antibacterial effect of fusidic acid alone and as an active component in electrospun poly(L-lactide-co-D/L-lactide) fiber fleeces. Methods: Minimal inhibitory concentrations (MIC) of fusidic acid and metronidazole (control) were determined for various oral bacteria. Eluates were collected from electrospun poly(L-lactide-co-D/L-lactide) fiber fleeces loaded with 10 and 20 wt% fusidic acid over a period of 28 d. Antibacterial activity was analyzed by means of a microdilution assay. Cytotoxicity was observed toward human gingival fibroblasts (HGFs). Results: All tested Gram-positive and Gram-negative oral bacteria were susceptible to fusidic acid. The lowest MIC was observed for Porphyromonas gingivalis (MIC < 0.062 µg/mL). Compared to the antibacterial activity of metronidazole, that of Porphyromonas gingivalis was suppressed by significant lower fusidic acid concentrations (p < 0.01). The eluates obtained from electrospun poly(L-lactide-co-D/L-lactide) fiber fleeces inhibited the growth of P. gingivalis, S. aureus, A. viscosus, and A. neslundii over a course of 28 days. The largest inhibition zones were detected for Porphyromonas gingivalis in case of the 20 wt% concentrations. The eluates were not cytotoxic toward HGFs. Conclusions: It was shown that fusidic acid has significant antibacterial potential. The results of the present investigation suggest that fusidic acid alone or delivered by electrospun fiber fleeces might be attractive for controlling oral pathogenic bacteria. Full article

The utilization of nettle (Urtica cannabina) as feed is restricted by its material properties (antibacterial activity and high buffering capacity). This study hypothesized that the use of lactic acid bacteria (LAB) attached to nettles can improve these problems. Lactococcus garvieae (LG), Pediococcus pentosaceus (PP), and LG + PP (LP) isolated from nettles were inoculated into nettle silage to explore nutrient retention and the microbial community structure. The results showed that inoculation significantly delayed dry matter and crude protein loss, inhibited neutral detergent fiber and acid detergent fiber degradation, and reduced ammonia nitrogen (NH₃-N) accumulation. There was a significant increase in Firmicutes abundance after inoculation, and the dominant genus, Aerococcus, was negatively correlated with NH₃-N accumulation. In the later stages of the PP treatment, Atopistipes synergistically inhibited Clostridia with acetic acid. However, the high buffering capacity and antibacterial components of raw nettle led to increased pH values during the later fermentation stages, limiting sustained acid production by LAB. These results confirm that nettle-derived LAB can effectively improve the quality of silage by regulating the microbial community and the acidification process; however, they must be combined with pretreatment strategies or optimized composite microbial agents to overcome raw material limitations. This study provides a theoretical basis and technical support for the utilization of nettle as feed. Full article

Photothermal electrospinning (PTE) represents an innovative fusion of electrospinning (ES) technology and photothermal therapy (PTT), where photothermal agents (PTAs) are incorporated into electrospun fibers to enable localized thermal effects under near-infrared (NIR) irradiation. The high surface area and tunable architecture of electrospun fibers provide an ideal platform for efficient PTA loading, while the precise temperature control and therapeutic efficacy of PTT significantly broaden its biomedical applications, including antibacterial therapy, anticancer treatment, tissue regeneration, and drug delivery. This review mainly focuses on the emerging field of PTE. Following an overview of the basic PTE parts (ES, PTAs, and PTT), the fabrication strategies (one- and two-step methods) of photothermal electrospun fibers and their latest advancements in both antibacterial and non-antibacterial applications are summarized. Furthermore, the current challenges are deliberated at the end of this review. Full article

Background/Objectives: The increasing occurrence of carbapenem resistance A. baumannii (CRAB) has forced clinicians to seek out alternative options with activity against CRAB. CRAB with inactivated PBP7/8 has been shown to result in an increased outer membrane permeability and could serve as a potential new adjuvant target. Methods: Two isogenic clinical isolates of A. baumannii HUMC1 were utilized (WT and HUMC1 ΔPBP7/8). Static concentration time-kill assays were performed against both isolates with escalating exposures to antibiotics. The resulting data were modeled using the Monolix software suite to capture parameters related to bacterial killing and PBP7/8 synergism. The model results were used to prospectively simulate clinically relevant antibiotic dosing of three antibiotics under physiological conditions and were validated using a hollow-fiber infection model (HFIM). Results: Treatment with monotherapy or combination therapy resulted in concentration-dependent killing for both isolates. Bacterial killing was greater with HUMC1 ΔPBP7/8 for all tested antibiotic concentrations. The mean bacterial population reduction was 4.38 log₁₀ CFU/mL for HUMC1 and 5.38 log₁₀ CFU/mL for HUMC1ΔPBP7/8 knockout isolate. The final mechanism-based model demonstrated improved antibacterial activity with PBP7/8 inhibition through a decline in KC₅₀ values of 59.7% across the beta-lactams in the PBP7/8 knockout. HFIM observations that were retrospectively compared to the simulated model-predicted bacterial concentration time course showed our final model was able to appropriately capture changes in bacterial population within a dynamic HFIM scenario. Conclusions: The quantification of KC₅₀ decline and increase in effectiveness of previously sidelined antimicrobial therapies with PBP7/8 inhibition suggests PBP7/8 is a promising potential target for an antibacterial adjuvant. This lends further support to advance to next-stage studies for identifying compounds that specifically inhibit PBP7/8 activity. Full article

This study investigated gelatin/zein nanofibers loaded with dihydromyricetin (0–20%, relative to protein weight), before and after the Maillard reaction (60 °C with 50% relative humidity for 6 h). Scanning electron microscopy and diameter distribution analysis indicated that dihydromyricetin incorporation increased the fiber diameter from 692 ± 133 to 922 ± 121 nm, while the nanofibers maintained a uniform morphology following the Maillard reaction. Fourier transform infrared spectroscopy revealed that dihydromyricetin formed hydrogen bonds with protein molecules. X-ray diffraction results indicate that dihydromyricetin was uniformly dispersed within the gelatin/zein nanofibers. The addition of dihydromyricetin improved the thermal stability of the nanofibers. Furthermore, after the Maillard reaction, the nanofibers with dihydromyricetin demonstrated enhanced water resistance. Mechanical testing revealed that nanofibers containing 20% dihydromyricetin after the Maillard reaction exhibited a considerably higher elastic modulus of approximately 90 MPa. In addition, nanofibers containing dihydromyricetin exhibited notable antioxidant activity and antibacterial properties against Escherichia coli and Staphylococcus aureus. In summary, gelatin/zein nanofibers containing high concentrations of dihydromyricetin exhibited favorable physical and functional properties, supporting their suitability as effective delivery systems for dihydromyricetin in active packaging applications. Full article

Solid-state microbial fermentation (SSMF) has been established as an effective bioprocessing strategy to augment the nutritional value of plant-derived feed substrates while reducing anti-nutritional factors (ANFs). However, there have been limited studies on the effects of microbial solid-state fermentation on the nutritional value and potential functional components in cottonseed hulls. This study investigated the nutritional enhancement of cottonseed hulls through anaerobic solid-state fermentation mediated by Candida utilis CU-3, while exploring the functional potential of the fermented feed by analyzing fungal community dynamics and metabolite profiling. The laboratory-preserved free gossypol-degrading strain Candida utilis CU-3 was inoculated into unsterilized, crushed, and screened cottonseed hulls for solid-state fermentation at room temperature for 10 days. The results demonstrated that, compared to the control group, the experimental group achieved a 61.90% increase in free gossypol degradation rate, a 27.78% improvement in crude protein content, and a 5.07% reduction in crude fiber, while crude fat showed no significant difference. During the fermentation process, microbial diversity decreased, and Candida utilis CU-3 became the dominant species. Untargeted metabolomics data revealed that cottonseed hulls inoculated with Candida utilis CU-3 produced functional bioactive compounds during fermentation, including chrysin, myricetin (anti-inflammatory, antibacterial, and antioxidant activities), and ginsenoside Rh2 (anticancer, antibacterial, and neuroprotective properties). This study demonstrates that inoculating Candida utilis CU-3 into cottonseed hulls enhances their health-promoting potential through the biosynthesis of diverse functional metabolites, providing a theoretical foundation for improving the nutritional profile of cottonseed hull-fermented feed. Full article

Water contamination due to microbial proliferation remains a critical global challenge, especially with increasing urbanization, industrial activities, and the use of agrochemicals, and it requires the development of innovative methods for their purification that are not harmful to the environment and humans. In this study, innovative antibacterial nanocomposite coatings, composed of zirconia and silver nanocluster, were developed and deposited via eco-friendly co-sputtering physical vapor deposition (PVD) method onto electrospun polymeric membranes (PCL and PAN-PCL) for water filtration applications. Structural and morphological analyses, including XRD and UV-Vis spectroscopy, confirmed the deposition of a composite coating, consisting of an amorphous zirconia matrix embedding silver nanoclusters, homogeneously distributed on one side of the polymeric fibers. Wettability evaluations showed an increase in hydrophobicity after coating, particularly affecting the filtration performance of the PCL membranes. Antibacterial tests revealed strong inhibition against Staphylococcus epidermidis (Gram-positive) and partial efficacy against Escherichia coli (Gram-negative). Filtration tests of contaminated solutions revealed a 99% reduction in Bacillus subtilis, significant inhibition of Listeria monocytogenes, and limited effect on E. coli, with no bacterial proliferation observed on the coated membranes. These results underscore the effectiveness of ZrO₂/Ag nanocomposites in enhancing microbial control and suggest a promising, scalable strategy for sustainable and safe water purification systems. Full article