Search Results (20)

The conventional production of waterborne polyurethane (WPU) typically relies on organic solvents to regulate viscosity; additionally, traditional ionic WPU systems still utilize volatile neutralizers, raising environmental and health concerns. To overcome these limitations and reduce dependence on petrochemical resources, this study presents a solvent-free approach for WPU synthesis using isophorone diisocyanate (IPDI), polytetrahydrofuran (PTMG), and the nonionic PEG derivative Ymer^TM A-130. In addition, castor oil (CO), a renewable and hydroxyl-rich bio-based material, was incorporated as a partial substitute for PTMG to improve both sustainability and material performance. The effects of varying substitution ratios of castor oil on the physical properties of the resulting dispersions, dried films, and coatings were initially investigated. The results indicate that increasing the castor oil content from 0 wt% to 11.8 wt% led to an enhancement in tensile strength, rising from 1.45 MPa to 2.40 MPa. Concurrently, the temperature at 5% weight loss (Td_5%) shifted upward from 263.84 °C to 285.36 °C, indicating a favorable trend in thermal stability. Furthermore, the preliminary solvent resistance, surface wetting characteristics, and environmental durability of the prepared coatings were evaluated and discussed. Full article

The synthesis and electrocatalytic properties of amorphous first- and third-row transition metal sulfides (a-TMS) for green hydrogen generation have been comprehensively reviewed. These electrocatalysts can be prepared by several solution processes, including chemical bath deposition, electrodeposition, sol–gel, hydrothermal reaction and thermolysis. The deposition method strongly influences the electrochemical properties of the synthesized a-TMS electrocatalyst. Based on overpotential at 10 mA/cm², the electrocatalytic activity of mono-metallic a-TMS for hydrogen evolution is ranked as follows: a-NiS_x > a-CuS_x > a-CoS_x > a-WS_x > a-FeS_x. The best performing a-NiS_x prepared by chemical bath deposition has an overpotential at 10 mA/cm² of 53 mV and Tafel slope of 68 mV/dec in 1 M KOH electrolyte. The integration of Ni into the a-TMS network structure is crucial to achieving high activity in multi-metallic a-TMS electrocatalyst, as demonstrated by the bifunctional (NiFe)S_x/NiFe(OH)_y nanocomposite catalyst. The critical role of Ni in a-TMS catalyst design can be attributed to the lower free energy change for hydrogen adsorption on Ni. Finally, the emerging catalyst design strategy of amorphous–crystalline heterostructures with a three-dimensional morphology will be discussed together with the need to identify hydrogen adsorption sites on a-TMS electrocatalysts in future. Full article

Under mild conditions, the effective conversion of carbon dioxide (CO₂) into formic acid (HCOOH) and carbon monoxide (CO) represents a promising avenue for mitigating greenhouse gas emissions and addressing energy crises. In this work, we analyzed the electro-catalytic activities of six metals (Ti, Fe, Ni, Cu, Zn, and Cr) anchored on monolayer molybdenum telluride (TM@MoTe₂) for the CO₂ reduction reaction (CO₂RR) from CO₂ to HCOOH and CO. Compared to the reversible hydrogen electrode, the limiting potential for HCOOH production on Ni@MoTe₂ is only about −0.38 V, and it is only about −0.20 V for the CO production on Cu@MoTe₂. The limiting potential is concerned with the free energies of *OCHO and *COOH. Both the CO₂RRs suppress the competing hydrogen evolution reaction (HER) and exhibit good selectivity for the desired reaction products. These features enable the efficient conversion of CO₂ into HCOOH on Ni@MoTe₂ or CO on Cu@MoTe₂. Our calculations could provide valuable insights for the design and synthesis of high-performance catalysts based on MoTe₂. Full article

Background/Objectives: Here, we report on the synthesis and biological evaluation of a novel peptide–drug conjugate, P6-SN38, which consists of the EGFR-specific short cyclic peptide, P6, and the Topo I inhibitor SN38, which is a bioactive metabolite of the anticancer drug irinotecan. Methods: SN38 is attached to the peptide at position 20 of the E ring’s tertiary hydroxyl group via a mono-succinate linker. Results: The developed peptide–drug conjugate (PDC) exhibited sub-micromolar anticancer activity on EGFR-positive (EGFR+) cell lines but no effect on EGFR-negative (EGFR−) cells. In vivo studies have shown that this PDC specifically accumulates in EGFR+ non-small cell lung cancer (NSCLC) xenografts and presents superior anticancer activity compared to the EGFR-specific antibody cetuximab (Erbitux^TM) and free SN38. The 10 mg/kg dose of P6-SN38 in a side-by-side EGFR+/EGFR− xenograft shows eradication of the EGFR+ tumor with good tolerance, but no inhibition of tumor growth of the EGFR− counterpart. Conclusions: The PDC examined in this study was proven to be highly efficient for NSCLC, broadening its utilization for targeted cancer therapy in EGFR overexpressed cancers. Full article

Supercapacitors hold promise for energy storage due to their exceptional power density and fast charge/discharge cycles. However, their performance hinges on the electrode material. Zeolitic imidazolate frameworks (ZIFs) are attractive options due to their tailorable structure and high surface area. But traditional ZIF synthesis relies on toxic solvents derived from fossil fuels, hindering their envisioned environmental benefit. This study explores using bio-derived solvents for a greener and potentially superior approach. The researchers employed anodic electrodeposition to synthesise cobalt-based ZIFs (Co-ZIFs) as supercapacitor electrode materials. Two linkers (2-methylimidazole and benzimidazole) and two bio-derived solvents (Cyrene^TM and γ-valerolactone (GVL)) were investigated. X-ray diffraction analysis revealed that bio-derived solvents enhanced the crystallinity of Co-ZIFs compared to traditional solvents. Notably, Cyrene^TM promoted better crystallinity for Co-bIM/Co-mIM structures. The Full Width at Half Maximum (FWHM) analysis suggests Cyrene^TM promotes Co-bIM/Co-mIM crystallinity (lower FWHM). Co-mIM in Cyrene^TM exhibits the best crystallinity (FWHM = 0.233) compared to other ZIF samples. Scanning electron microscopy confirmed these findings, showing larger and well-defined crystals for bio-derived solvent-synthesised ZIFs. The choice of solvent significantly impacted the final ZIF structure. While 2-methylimidazole consistently formed ZIF-67 regardless of the solvent, benzimidazole exhibited solvent-dependent behaviour. GVL yielded the highly porous Co-ZIF-12 structure, whereas DMF (N,N-dimethylformamide) and Cyrene^TM produced the less porous ZIF-9. This work reports the first-ever instance of ZIF-12 synthesis via an electrochemical method, highlighting the crucial interplay between solvent and precursor molecule in determining the final ZIF product. The synthesised binder-free Co-ZIF electrodes were evaluated for supercapacitor performance. The capacitance data revealed GVL as the most effective solvent, followed by DMF and then Cyrene^TM. This suggests GVL is the preferred choice for this reaction due to its superior performance. The ZIF-12-based electrode exhibits an impressive specific capacitance (C_sp) of 44 F g⁻¹, significantly higher than those achieved by ZIF-9-Cyrene (1.2 F g⁻¹), ZIF-9-DMF (2.5 F g⁻¹), ZIF-67-GVL (35 F g⁻¹), ZIF-67-Cyrene (6 F g⁻¹), and ZIF-67-DMF (16 F g⁻¹) at 1 A g⁻¹. This surpasses the C_sp of all other ZIFs studied, including high-performing ZIF-67(GVL). ZIF-12(GVL) maintained superior C_sp even at higher current densities, demonstrating exceptional rate capability. Among the bio-derived solvents, GVL outperformed Cyrene^TM. Notably, the Co-bIM in the GVL sample exhibited a ZIF-12-like structure, offering potential advantages due to its larger pores and potentially higher surface area compared to traditional ZIF-67 and ZIF-9 structures. This work presents a significant advancement in Co-ZIF synthesis. By utilising bio-derived solvents, it offers a more sustainable and potentially superior alternative. This paves the way for the eco-friendly production of Co-ZIFs with improved properties for supercapacitors, gas separation, catalysis, and other applications. Full article

Background: High-fat diets cause gut dysbiosis and promote triglyceride accumulation, obesity, gut permeability changes, inflammation, and insulin resistance. Both cocoa butter and fish oil are considered to be a part of healthy diets. However, their differential effects on gut microbiome perturbations in mice fed high concentrations of these fats, in the absence of sucrose, remains to be elucidated. The aim of the study was to test whether the sucrose-free cocoa butter-based high-fat diet (C-HFD) feeding in mice leads to gut dysbiosis that associates with a pathologic phenotype marked by hepatic steatosis, low-grade inflammation, perturbed glucose homeostasis, and insulin resistance, compared with control mice fed the fish oil based high-fat diet (F-HFD). Results: C57BL/6 mice (5–6 mice/group) were fed two types of high fat diets (C-HFD and F-HFD) for 24 weeks. No significant difference was found in the liver weight or total body weight between the two groups. The 16S rRNA sequencing of gut bacterial samples displayed gut dysbiosis in C-HFD group, with differentially-altered microbial diversity or relative abundances. Bacteroidetes, Firmicutes, and Proteobacteria were highly abundant in C-HFD group, while the Verrucomicrobia, Saccharibacteria (TM7), Actinobacteria, and Tenericutes were more abundant in F-HFD group. Other taxa in C-HFD group included the Bacteroides, Odoribacter, Sutterella, Firmicutes bacterium (AF12), Anaeroplasma, Roseburia, and Parabacteroides distasonis. An increased Firmicutes/Bacteroidetes (F/B) ratio in C-HFD group, compared with F-HFD group, indicated the gut dysbiosis. These gut bacterial changes in C-HFD group had predicted associations with fatty liver disease and with lipogenic, inflammatory, glucose metabolic, and insulin signaling pathways. Consistent with its microbiome shift, the C-HFD group showed hepatic inflammation and steatosis, high fasting blood glucose, insulin resistance, increased hepatic de novo lipogenesis (Acetyl CoA carboxylases 1 (Acaca), Fatty acid synthase (Fasn), Stearoyl-CoA desaturase-1 (Scd1), Elongation of long-chain fatty acids family member 6 (Elovl6), Peroxisome proliferator-activated receptor-gamma (Pparg) and cholesterol synthesis (β-(hydroxy β-methylglutaryl-CoA reductase (Hmgcr). Non-significant differences were observed regarding fatty acid uptake (Cluster of differentiation 36 (CD36), Fatty acid binding protein-1 (Fabp1) and efflux (ATP-binding cassette G1 (Abcg1), Microsomal TG transfer protein (Mttp) in C-HFD group, compared with F-HFD group. The C-HFD group also displayed increased gene expression of inflammatory markers including Tumor necrosis factor alpha (Tnfa), C-C motif chemokine ligand 2 (Ccl2), and Interleukin-12 (Il12), as well as a tendency for liver fibrosis. Conclusion: These findings suggest that the sucrose-free C-HFD feeding in mice induces gut dysbiosis which associates with liver inflammation, steatosis, glucose intolerance and insulin resistance. Full article

As an endosymbiont, Wolbachia exerts significant effects on the host, including on reproduction, immunity, and metabolism. However, the study of Wolbachia in Thysanopteran insects, such as flower thrips Frankliniella intonsa, remains limited. Here, we assembled a gap-free looped genome assembly of Wolbachia strain wFI in a length of 1,463,884 bp (GC content 33.80%), using Nanopore long reads and Illumina short reads. The annotation of wFI identified a total of 1838 protein-coding genes (including 85 pseudogenes), 3 ribosomal RNAs (rRNAs), 35 transfer RNAs (tRNAs), and 1 transfer-messenger RNA (tmRNA). Beyond this basic description, we identified mobile genetic elements, such as prophage and insertion sequences (ISs), which make up 17% of the entire wFI genome, as well as genes involved in riboflavin and biotin synthesis and metabolism. This research lays the foundation for understanding the nutritional mutualism between Wolbachia and flower thrips. It also serves as a valuable resource for future studies delving into the intricate interactions between Wolbachia and its host. Full article

In this work, the preparation and systematic investigation of cross-linked polyurethane-epoxy (PU-EP) polymer systems are reported. The PU-EP polymers were prepared using a reaction of isocyanate (NCO)-terminated PU-prepolymer with diglycidyl ether of bisphenol A (DGEBA)-amine cooligomer. The oligomerization of DGEBA was carried out by adding furfurylamine (FA) or ethanolamine (EA), resulting in DGEBA-amine cooligomers. For the synthesis of NCO-terminated PU-prepolymer, poly(ε-caprolactone)diol (PCD) (M_n = 2 kg/mol) and 1,6-hexamethylene diisocyanate (HDI) were used. The cross-linking was achieved by adding DGEBA-amine cooligomer to PU-prepolymer, in which the obtained urethane bonds, due to the presence of free hydroxil groups in the activated DGEBA, served as netpoints. During cross-linking, ethanolamine provides an additional free hydroxyl group for the formation of a new urethane bond, while furfurylamine can serve as a thermoreversible coupling element (e.g., Diels–Alder adduct). The PU-EP networks were characterized using attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA) and scanning electron microscopy (SEM). The DMA curves of some PU-EPs (depending on the compositions and the synthetic method) revealed a plateau-like region above the melting temperature (T_m) of PCD, confirming the presence of a cross-linked structure. This property resulted in a shape memory (SM) behavior for these samples, which can be fine-tuned in the presence of furfurylamine through the formation of additional thermoreversible bonds (e.g., Diels–Alder adduct). Full article

Mechanochemically induced methods are commonly used for the depolymerization of polymers, including plastic and agricultural wastes. So far, these methods have rarely been used for polymer synthesis. Compared to conventional polymerization in solutions, mechanochemical polymerization offers numerous advantages such as less or no solvent consumption, the accessibility of novel structures, the inclusion of co-polymers and post-modified polymers, and, most importantly, the avoidance of problems posed by low monomer/oligomer solubility and fast precipitation during polymerization. Consequently, the development of new functional polymers and materials, including those based on mechanochemically synthesized polymers, has drawn much interest, particularly from the perspective of green chemistry. In this review, we tried to highlight the most representative examples of transition-metal (TM)-free and TM-catalyzed mechanosynthesis of some functional polymers, such as semiconductive polymers, porous polymeric materials, sensory materials, materials for photovoltaics, etc. Full article

Non-isocyanate polyurethanes (NIPUs) based on biobased polyamines and polycarbonates are a sustainable alternative to conventional polyurethanes (PU). This article discloses a novel method to control the crosslinking density of fully biobased isocyanate-free polyurethanes, synthesized from triglycerides carbonated previously in scCO₂ and different diamines, such as ethylenediamine (EDA), hexamethylenediamine (HMDA) and Priamine^TM-1075 (derived from a dimerized fatty acid). As capping substances, water or bioalcohols are used in such a way that the crosslinking density can be adjusted to suit the requirements of the intended application. An optimization of the NIPU synthesis procedure is firstly carried out, establishing the polymerization kinetics and proposing optimal conditions set for the synthesis of the NIPUs. Then, the influence of the partial blocking of the active polymerization sites of the carbonated soybean oil (CSBO), using monofunctional amines, on the physical properties of the NIPUS is explored. Finally, the synthesis of fully biobased NIPUs with a targeted crosslinking density is achieved using hybrid NIPUs, employing partially carbonated oil and H₂O or ethanol as blockers to achieve the desired physical properties in a very precise manner. Full article

Salvia plebeia R. Br. (SP), grown from autumn to spring, is used as a medicinal herb from roots to leaves. This herb exhibits antioxidant activities and various physiological effect, including anti-asthma, immune-promoting, anti-obesity, and anti-cholesterol effects. However, the effectiveness of SP against non-alcoholic fatty liver disease (NAFLD) and the associated mechanism have not been elucidated. In this study, alleviation of NAFLD by SP was confirmed in a mouse model of hepatic steatosis induced by a high-fat diet and in HepG2 cells administered free fatty acids (FFA). In the experimental model, intrahepatic lipid accumulation was investigated using the AdipoRed^TM assay, Oil Red O staining, biomarker analysis, and hematoxylin and eosin staining. Furthermore, glucose tolerance was examined based on the fasting glucose levels and oral glucose tolerance. The molecular mechanisms related to hepatic steatosis were determined based on marker mRNA levels. Blood FFAs were found to flow into the liver via the action of fatty acid translocase, cluster of differentiation 36, and fatty acid transporter proteins 2 and 5. Salvia plebeia R. Br. water extract (SPW) suppressed the FFAs inflow by regulating the expression of the above-mentioned proteins. Notably, modulating the expression of AMP-activated protein kinase (AMPK) and liver X receptor, which are involved in the regulation of lipid metabolism, stimulated peroxisome proliferator activated receptor α in the nucleus to induce the expression genes involved in β-oxidation and increase β-oxidation in the mitochondria. AMPK modulation also increased the expression of sterol regulatory element binding protein-1c, which activated lipid synthesis enzymes. As a consequence of these events, triglyceride synthesis was reduced and lipid accumulation in hepatocytes was alleviated. Overall, our findings suggested that SPW could ameliorate NAFLD by inhibiting hepatic steatosis through AMPK modulation. Full article

Recombinant immunotoxins (RITs) are an effective class of agents for targeted therapy in cancer treatment. In this article, we demonstrate the straight-forward production and testing of an anti-CD7 RIT based on PE24 in a prokaryotic and a eukaryotic cell-free system. The prokaryotic cell-free system was derived from Escherichia coli BL21 Star^TM (DE3) cells transformed with a plasmid encoding the chaperones groEL/groES. The eukaryotic cell-free system was prepared from Chinese hamster ovary (CHO) cells that leave intact endoplasmic reticulum-derived microsomes in the cell-free reaction mix from which the RIT was extracted. The investigated RIT was built by fusing an anti-CD7 single-chain variable fragment (scFv) with the toxin domain PE24, a shortened variant of Pseudomonas Exotoxin A. The RIT was produced in both cell-free systems and tested for antigen binding against CD7 and cell killing on CD7-positive Jurkat, HSB-2, and ALL-SIL cells. CD7-positive cells were effectively killed by the anti-CD7 scFv-PE24 RIT with an IC₅₀ value of 15 pM to 40 pM for CHO and 42 pM to 156 pM for E. coli cell-free-produced RIT. CD7-negative Raji cells were unaffected by the RIT. Toxin and antibody domain alone did not show cytotoxic effects on either CD7-positive or CD7-negative cells. To our knowledge, this report describes the production of an active RIT in E. coli and CHO cell-free systems for the first time. We provide the proof-of-concept that cell-free protein synthesis allows for on-demand testing of antibody–toxin conjugate activity in a time-efficient workflow without cell lysis or purification required. Full article

Ribosome-inactivating proteins (RIPs) are known as RNA N-glycosylases. They depurinate the major rRNA, damaging ribosomes and inhibiting protein synthesis. Here, new single-chain (type-1) RIPs named sodins were isolated from the seeds (five proteins), edible leaves (one protein) and roots (one protein) of Salsola soda L. Sodins are able to release Endo’s fragment when incubated with rabbit and yeast ribosomes and inhibit protein synthesis in cell-free systems (IC₅₀ = 4.83–79.31 pM). In addition, sodin 5, the major form isolated from seeds, as well as sodin eL and sodin R, isolated from edible leaves and roots, respectively, display polynucleotide:adenosine glycosylase activity and are cytotoxic towards the Hela and COLO 320 cell lines (IC₅₀ = 0.41–1200 nM), inducing apoptosis. The further characterization of sodin 5 reveals that this enzyme shows a secondary structure similar to other type-1 RIPs and a higher melting temperature (Tm = 76.03 ± 0.30 °C) and is non-glycosylated, as other sodins are. Finally, we proved that sodin 5 possesses antifungal activity against Penicillium digitatum. Full article

The catalytic conversion of CO₂ to C₂ products through the CO₂ reduction reaction (CO₂RR) offers the possibility of preparing carbon-based fuels and valuable chemicals in a sustainable way. Herein, various Fe_n and Co₅ clusters are designed to screen out the good catalysts with reasonable stability, as well as high activity and selectivity for either C₂H₄ or CH₃CH₂OH generation through density functional theory (DFT) calculations. The binding energy and cohesive energy calculations show that both Fe₅ and Co₅ clusters can adsorb stably on the N-doped carbon (NC) with one metal atom anchored at the center of the defected hole via a classical MN₄ structure. The proposed reaction pathway demonstrates that the Fe₅-NC cluster has better activity than Co₅-NC, since the carbon–carbon coupling reaction is the potential determining step (PDS), and the free energy change is 0.22 eV lower in the Fe₅-NC cluster than that in Co₅-NC. However, Co₅-NC shows a better selectivity towards C₂H₄ since the hydrogenation of CH₂CHO to CH₃CHO becomes the PDS, and the free energy change is 1.08 eV, which is 0.07 eV higher than that in the C-C coupling step. The larger discrepancy of d band center and density of states (DOS) between the topmost Fe and sub-layer Fe may account for the lower free energy change in the C-C coupling reaction. Our theoretical insights propose an explicit indication for designing new catalysts based on the transition metal (TM) clusters supported on N-doped carbon for multi-hydrocarbon synthesis through systematically analyzing the stability of the metal clusters, the electronic structure of the critical intermediates and the energy profiles during the CO₂RR. Full article

The Co4Cat^TM process is a simple, surfactant-free method to produce colloidal dispersions of precious metal nanoparticles in alkaline mono-alcohols. The synthesis is performed in low-boiling-point solvents and is relevant for industrial production. The robustness of the process is demonstrated by using three different commercial spirits as solvents to obtain Pt nanoparticles. The results demonstrate that careful control of the solvent purity is not needed to achieve the synthesis of stable 2 nm platinum nanoparticle colloids readily active electrocatalysts for energy conversion reactions like the methanol oxidation. Full article