Search Results (540)

Background/Objectives: The functionalization of various forms of graphene, such as graphene nanoplatelets, graphene oxide, and reduced graphene oxide, in biomaterials is a promising strategy in dentistry, particularly regarding their antimicrobial potential. However, conclusive studies on the toxicity and biocompatibility of graphene-based materials remain limited, and standardized guidelines for their production, handling, and dental applications are still lacking. This scoping review aims to map the available studies on various types of graphene, synthesize evidence on their antimicrobial effectiveness, and describe the main biological responses when functionalized in dental biomaterials. Methods: An electronic search was conducted in the Clarivate, PubMed, and Scopus databases using the descriptors as follows: ‘graphene’ AND ‘antimicrobial effect’ AND ‘bactericidal effect’ AND (‘graphene oxide’ OR ‘dental biofilm’ OR ‘antibacterial properties’ OR ‘dental materials’). Article screening and eligibility assessment were performed based on predefined inclusion and exclusion criteria, following the PRISMA-ScR guidelines. Results: The search identified 793 articles. After removing duplicates, applying the eligibility criteria, and performing a full-text analysis of 64 articles, 21 studies were included in the review. Graphene oxide, particularly at low concentrations, was the most commonly studied graphene variant, demonstrating significant antimicrobial efficacy against S. mutans, S. faecalis, E. coli, P. aeruginosa, and C. albicans. Both mechanical and chemical mechanisms have been linked to the biological responses of graphene-doped biomaterials. The biocompatibility and cytotoxicity of these compounds remain controversial, with some studies reporting favorable outcomes, while others raise significant concerns. Conclusions: Graphene shows great promise as an antimicrobial agent in dental biomaterials. Despite encouraging results, more in vitro and in vivo studies are needed to better understand its biocompatibility and cytotoxicity in dental applications. Additionally, standardized production protocols, clearly defined clinical applications in dentistry, and regulatory guidelines from the World Health Organization concerning handling procedures and occupational risks remain necessary. Full article

Toothpaste is an essential oral hygiene product commonly used to sustain oral health due to its incorporation of antimicrobial agents. Numerous functional toothpastes enriched with antimicrobial agents have been developed and are available to consumers. This study evaluates the antimicrobial and antibiofilm efficacy of 12 commercially available toothpaste products, including those with specialized functions. Statistical significance was assessed to validate the differences observed among the toothpaste samples. Their effects on Streptococcus mutans, the primary pathogen responsible for dental caries, were evaluated. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were determined, and bacterial growth was measured to compare antimicrobial activities. Toothpaste containing 1000 μg/mL fluoride and whitening toothpaste exhibited the strongest antimicrobial effects, effectively inhibiting S. mutans growth. Additionally, bamboo salt-enriched and tartar-control toothpaste demonstrated inhibitory effects on bacterial growth. Assays to evaluate the ability of cells to form biofilms and the expression of genes involved in biofilm formation revealed a partial correlation between biofilm formation and spaP, gtfB, gtfC, and gtfD expression, although some showed opposite trends. Collectively, this study provides valuable insights into the antimicrobial and biofilm inhibition capabilities of commercial toothpastes against S. mutans, offering a foundation for evaluating the efficacy of functional toothpaste products. Full article

Allyl isothiocyanate (AITC) is a naturally occurring, pungent compound abundant in cruciferous vegetables and functions as a repellent for various organisms. The antibacterial effect of AITC against various bacteria has been reported, but there are no reports on the effect on Streptococcus mutans, a major bacterium contributing to dental caries. In this study, we investigated the inhibitory effect and mechanism of AITC on the survival and growth of S. mutans. AITC showed an antibacterial effect in a time- and concentration-dependent manner. In addition, bacterial growth was delayed in the presence of AITC, and there were almost no bacteria in the presence of 0.1% AITC. In a biofilm assay, the amount of biofilm formation with 0.1% AITC was significantly decreased compared to the control. RNA sequencing analysis showed that the expression of 39 genes (27 up-regulation and 12 down-regulation) and 38 genes (24 up-regulation and 14 down-regulation) of S. mutans was changed during the survival and the growth, respectively, in the presence of AITC compared with the absence of AITC. Protein–protein interaction analysis revealed that AITC mainly interacted with genes of unknown function in S. mutans. These results suggest that AITC may inhibit cariogenicity of S. mutans through a novel mechanism. Full article

The Amazon represents a key source of food biodiversity and is home to native fruits with high nutritional and functional potential, many of which remain largely unstudied. This research aimed to evaluate the presence of bioactive compounds, as well as the antioxidant and antimicrobial activity of Miconia crenata, Grias neuberthii, Lacmellea oblongata, Pourouma cecprofiilia, and Annona edulis. Physical and chemical parameters, mineral content (atomic absorption), vitamin C, organic acid, carotenoids, chlorophylls, and phenols (liquid chromatography), antioxidant activity (ABTS, DPPH), and antimicrobial activity (against Candida albicans, Candida tropicalis, Escherichia coli, Staphylococcus aureus, and Streptococcus mutans) were determined. High concentrations of calcium, syringic acid, and antioxidant activity were found in the fruits of Miconia crenata; malic and caffeic acids in Grias neuberthii; citric acid, naringenin, and antioxidant activity in Lactuca oblongata; potassium, chlorogenic acid, and ferulic acid in Pourouma cecropiifolia; and tartaric acid and gallic acid in Annona edulis. Additionally, low antimicrobial activity was observed in M. crenata against E. coli (2.7 mg/mL), G. neuberthii against S. aureus (10.3 mg/mL), and L. oblongata against S. mutans (10.4 mg/mL), C. albicans (20.8 mg/mL), and C. tropicalis (20.8 mg/mL). The results confirm that these Amazonian fruits are a relevant source of functional bioactive compounds, highlighting their potential for use in the food, pharmaceutical, and biotechnology sectors. Full article

Background: Monolithic zirconia has attracted considerable interest in dentistry due to its favorable physical and mechanical properties, making it a promising alternative for crown fabrication. Nonetheless, a standardized finishing protocol for this material has yet to be established. Objective: This study aimed to evaluate the surface characteristics and in vitro biofilm formation of zirconia finished by either polishing or glazing. Methods: A total of 72 zirconia specimens were fabricated and divided into control, glazing, and polishing groups. Surface analysis included roughness, wettability, and surface free energy. Microbiological analysis included CFU (colony-forming units per mL) counts, microbial adhesion at 2, 4, 6, and 8 h, biofilm biovolume, and qualitative biofilm assessment via scanning electron microscopy (sEm). Results: The glazing group showed significantly greater roughness than the polishing (p = 0.006) and control (p = 0.016) groups, along with a lower contact angle (polishing—p = 0.002; control—p < 0.001) and higher surface energy (polishing—p = 0.005; control—p < 0.001). No significant differences were observed in CFU counts for the tested microorganisms (C. albicans, p = 0.158; L. casei, p = 0.610; S. mutans, p = 0.904). Regarding microbial adhesion, the polishing group showed a smaller biofilm-covered area compared to the control group for both total biofilm (p = 0.008) and viable biofilm (p = 0.005). no statistically significant difference was observed in biofilm biovolume (p = 0.082). Conclusions: These findings suggest that, despite the surface differences among the groups, biofilm formation was not significantly affected. Full article

Background: The oral microbiome differs in obese patients compared to normal-weight subjects. Microbiologic shifts very often appear after surgical interventions such as bariatric surgery (BS) and in immunocompromised patients. However, the oral microbiome composition and load in subjects after bariatric surgery are unclear. Aim: The aim of this review is to summarize the current state of the art related to the oral microbiome shift induced by bariatric surgery and to discuss its implications on oral cavity health. Methods: Electronic databases: PubMed/Medline, Web of Science, and Cochrane Library were searched for articles published up to March 30, 2025, describing prospective studies focused on changes in the oral microbiota of patients who underwent bariatric surgery. Results: Eight studies measuring the oral microbiome with different approaches—16S ribosomal RNA (16S rRNA) sequencing, polymerase chain reaction (PCR), culture, and matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI TOF MS)—were included in this review. The following bariatric techniques were used: sleeve gastrectomy, Roux-en-Y gastric bypass, Omega loop gastric bypass, and laparoscopic gastric plication. The follow-up period ranged from 3 to 12 months. The results of microbiologic studies were unequivocal. There was an increment in Streptococcus mutans reported, high levels of Candida species, and increased rates of some periodontitis-associated bacteria (Porphyromonas gingivalis) in the post-bariatric surgery period, though some studies suggested a shift towards non-pathogenic composition of the oral microbiome in prospective observations. Conclusions: The local oral microbial homeostasis becomes strongly impacted by the bariatric surgical treatment itself as well as its consequences in the further post-operative period. Therefore, obese patients undergoing BS require very careful dental observation. Full article

Oral diseases such as periodontitis and dental caries, as well as conditions related to oral health such as halitosis, are closely associated with dysbiosis of the oral microbiota and continue to pose significant public health challenges worldwide. With the increasing resistance to existing antibiotics and side effects of chemical disinfectants, probiotics have emerged as promising alternatives for oral healthcare. This study aimed to evaluate the oral health efficacy and probiotic properties of Limosilactobacillus fermentum (L. fermentum) MG4717 isolated from the human oral cavity. L. fermentum MG4717 showed notable antimicrobial activity against the key oral pathogens Streptococcus mutans (S. mutans), Aggregatibacter actinomycetemcomitans (A. actinomycetemcomitans), Porphyromonas gingivalis (P. gingivalis), and Fusobacterium nucleatum (F. nucleatum) and effectively inhibited biofilm formation. Additionally, L. fermentum MG4717 significantly downregulated methionine gamma-lyase (mgl) mRNA expression in P. gingivalis, which is implicated in halitosis and pathogenicity. L. fermentum MG4717 strongly adhered to the KB and HT-29 epithelial cells and exhibited good resilience under simulated gastrointestinal conditions. Whole-genome sequencing (WGS) and average nucleotide identity (ANI) analysis confirmed strain identity (98.73% average nucleotide identity with L. fermentum DSM20052) and the absence of transferable antibiotic resistance genes. Safety assessments revealed no cytotoxicity, hemolytic activity, or bile salt hydrolase activity. These findings suggest that L. fermentum MG4717 has the potential to be used as a safe and effective oral probiotic beneficial for oral health. Full article

Aim: The aim of this study was to evaluate the adhesion of oral microorganisms on the surfaces of polytetrafluoroethylene (PTFE) membranes used in guided bone regeneration (GBR) procedures. Materials and Methods: In this study, three oral microorganisms (Streptococcus mutans, Porphyromonas gingivalis, and Candida albicans) were used, and six PTFE membranes were characterized by their surface roughness, contact angle (CA), and surface free energy (SFE). Microbial hydrophobicity was investigated, and adhesion was examined via DNA extraction and quantitative real-time PCR. Results: Significant differences were noted amongst the membranes with respect to SFE, CA, and roughness (p < 0.001). S. mutans was the most hydrophobic microorganism, followed by C. albicans and P. gingivalis. SEM analyses confirmed that the microorganisms adhered to all membranes, with Surgitime being the membrane that attracted the highest number of S. mutans (p < 0.001) and P. gingivalis (p < 0.001). By contrast, OsseoGuard-TXT was one of the membranes that attracted the lowest number (p < 0.001) of all three tested species. Conclusions: The results showed that microbial adhesion to PTFE membranes was affected by the membrane surface roughness and SFE, as well as the characteristics of the microorganisms. The most hydrophilic bacteria adhered the least to all the tested membranes, whereas membranes with a low surface roughness and high SFE attracted the lowest number of all the tested microbes. These results may guide the selection of an appropriate GBR membrane. Full article

The present work reports the synthesis and structural design of three novel Zn(II) complexes [Zn(L¹)(CH₃COO)(H₂O)] (1), [Zn(L²)₂] (2), and [Zn(L³)₂] (3) with carbazate ligands, 2-acetylpyridine-methylcarbazate (HL¹), 2-acetylpyridine-ethylcarbazate (HL²), and 2-acetylpyridine-benzylcarbazate (HL³). All compounds were characterized by spectroscopic methods, and the crystal structures of the complexes were elucidated by single-crystal X-ray. Based on the analysis, distorted square pyramid geometry is suggested for complex (1) and an octahedral geometry is suggested for complexes (2) and (3) with the ligands exhibiting an NNO-donor system. The 3D Hirshfeld surface and the 2D fingerprint plot were used to study the non-covalent interactions in the crystal structures. The in vitro antibacterial investigation of the free ligands and their complexes was performed against different strains of periodontopathogen bacteria. The Zn(II) complexes showed more potent antibacterial activity than the free ligand. Molecular docking studies showed the metal complexes as promising candidates for further therapeutic exploration, particularly in targeting the ATP-binding cassette transporter with peptidase domain of the cariogenic bacteria S. mutans (PDB code 5XE9) and the prolyl tripeptidyl aminopeptidase from P. gingivalis anaerobic bacteria (PDB code 2EEP) inhibition. Full article

The aim of this research was to compare the growth-inhibitory effect of halloysite-based nanotubes preloaded with sodium fluoride incorporated into two commercial glass ionomers (Vitrebond 3M^TM and Ionobond VOCO) for indirect pulp capping. Methods: Sixty samples were prepared and were distributed into two control groups, two positive control groups and two experimental groups. A total of 10% of the total weight of ionomer powder required to prepare each sample was replaced with nanotubes that had been preloaded at 2000 parts per million (minimum inhibitory dose for Streptococcus mutans established in this study using the McFarland index). The growth-inhibitory effect was determined by placing the samples in Petri dishes inoculated with S. mutans for 24 h at 37 °C. Results: Regarding the control groups, only Vitrebond demonstrated a growth inhibition zone; both experimental groups showed an inhibitory effect, and statistical differences were observed when the experimental Ionobond group and control groups were compared. Conclusions: The ionomers reinforced with fluorine-modified nanotubes showed an adequate inhibitory effect on Streptococcus mutans. Full article

Background/Objectives: Polymeric monoaxial nanofibers are gaining prominence due to their numerous applications, particularly in functional scenarios such as wound management. The study successfully developed and built a special-purpose vessel and device for fabricating polymeric nanofibers. Fabrication of composite scaffolds from piezoelectric poly(vinylidenefluoride-trifluoroethylene) copolymer (PVDF-TrFE) nanofibers encapsulated with myrrh extract was investigated. Methods: The gyrospun nanofibers were characterized using SEM, EDX, FTIR, XRD, and TGA to assess the properties of the composite materials. The study also investigated the release profile of myrrh extract from the nanofibers, demonstrating its potential for sustained drug delivery. The composite’s antimicrobial properties were evaluated using the disc diffusion method against various pathogenic microbes, showcasing their effectiveness. Results: It was found that an 18% (w/v) PVDF-TrFE concentration produces the best fiber mats compared to 20% and 25%, resulting in an average fiber diameter of 411 nm. Myrrh extract was added in varying amounts (10%, 15%, and 20%), with the best average fiber diameter identified at 10%, measuring 436 nm. The results indicated that the composite nanofibers were uniform, bead-free, and aligned without myrrh. The study observed a cumulative release of 79.66% myrrh over 72 h. The release profile showed an initial burst release of 46.85% within the first six hours, followed by a sustained release phase. Encapsulation efficiency was 89.8%, with a drug loading efficiency of 30%. Antibacterial activity peaked at 20% myrrh extract. S. mutans was the most sensitive pathogen to myrrh extract. Conclusions: Due to the piezoelectric effect of PVDF-TrFE and the significant antibacterial activity of myrrh, the prepared biohybrid nanofibers will open new avenues toward tissue engineering and wound healing applications. Full article

Oral infections, caused by bacterial, fungal, and viral pathogens, are a significant source of dental morbidity and can lead to systemic complications, especially in immunocompromised individuals. Complex microbial interactions and host immune responses drive common conditions such as dental caries, periodontal disease, oral candidiasis, and herpetic lesions. Conventional antimicrobial therapies face limitations due to resistance and adverse effects, prompting interest in alternative treatments. Cannabidiol (CBD), a non-psychoactive compound derived from Cannabis sativa, has emerged as a promising candidate due to its antimicrobial, anti-inflammatory, and immunomodulatory properties. CBD targets various molecular pathways, including cannabinoid receptors, TRP channels, adenosine receptors, and PPARs, contributing to its multifaceted therapeutic effects. It has demonstrated efficacy against oral pathogens such as Streptococcus mutans, Enterococcus faecalis, and Candida albicans, disrupting biofilms and bacterial membranes. Additionally, CBD modulates inflammatory responses by reducing cytokine production and oxidative stress, particularly relevant in chronic conditions like periodontal disease. Emerging evidence also suggests synergistic effects with conventional antimicrobials and benefits in tissue regeneration. This review highlights the therapeutic potential of CBD in managing oral infections, offering a novel approach to overcoming current treatment limitations and guiding future research into safer and more effective oral health interventions. Full article

Background/Objectives: Dental caries and candidiasis are major health problems worldwide. Dental caries is caused by cariogenic bacteria, especially those belonging to the Streptococcus genus, whereas candidiasis is caused by Candida species. In this study, the antimicrobial activity of a series of synthetic N-methyl-4-piperidone-derived monoketone curcuminoids (MKCs) against Candida albicans, C. krusei, and a representative panel of cariogenic bacteria was assessed. Methods: Fifteen MKCs were synthesized using an environmentally friendly base-catalyzed Claisen–Schmidt condensation between an aromatic aldehyde (R-PhCHO) and N-methyl-4-piperidone ethanol using NaOH as the catalyst. These compounds were evaluated for their antibacterial activity against a representative panel of cariogenic bacteria, along with their antifungal activity against Candida krusei and C. albicans. The antimicrobial activity was determined based on the Minimum Inhibitory Concentration (MIC) values. Results: Most of the compounds were obtained in about 2 h in yields ranging from 40 to 70%. None of the compounds displayed antifungal activity, even at 100 μg/mL, the highest tested concentration. Similarly, none of the compounds were active against Enterococcus faecalis. On the other hand, compounds 1 (R = H), 10 (R = 3,4,5-OMe), and 13 (R = 3-F) displayed moderate activity against Streptococcus mutans (13), S. salivarus (1), L. paracasei (1 and 10), S. mitis (1, 10, and 13), S. sanguinis (1, 10, and 13), and S. sobrinus (13), with MIC values of 250 μg/mL and 500 μg/mL. The presence of the N-methyl-4-piperidone ring was found to boost the antibacterial activity as compared to the corresponding acetone-derived MKCs. Moreover, the antibacterial activity of compounds 10 and 13 was associated with the presence and position of the fluor atom and the methoxy groups at the aromatic ring. Conclusions: This study contributed to a better understanding of the antimicrobial activity of MKCs, whose data in the literature are still scarce. Full article

Developing an oral fibrous barrier membrane that prevents bacterial invasion while possessing antibacterial properties and facilitating fluid decompression remains a significant clinical and scientific challenge. In this study, we developed a novel Janus membrane by modifying a polypropylene (PP) fibrous membrane with dopamine and zinc oxide nanoparticles (ZnO-NPs). Fabricated via a simple floating immersion method, this asymmetric bilayer structure consists of a hydrophobic PP layer and a hydrophilic PP/dopamine@30 nm ZnO layer, providing both antibacterial properties and enhanced fluid filtration. The mechanical properties of the PP/ZnO membrane were significantly enhanced, with an increase in the Young’s modulus and ultimate tensile strength, indicating improved strength. Antibacterial activity against Streptococcus mutans (S. mutans) demonstrated a significant reduction in biofilm formation on the PP/dopamine@30 nm ZnO surface compared to unmodified PP. Water flux tests confirmed a stable, high filtration rate, with increased permeability under rising pressure. In vivo experiments with miniature pigs confirmed reduced bacterial presence on the sterile side of the membrane. These findings highlight the potential of the membrane for oral exudate filtration, extending filtration time and minimizing infection risks under strict sterility conditions. Further improvements in barrier properties are necessary to optimize its clinical performance. Full article

This study aimed to evaluate the physicochemical and mechanical properties of a modified adhesive system containing resveratrol by assessing its microtensile bond strength (µTBS), degree of conversion (DC), mini-flexural strength (MFS), and antibacterial activity. The modified etch-and-rinse adhesive system was prepared by resveratrol (RES) incorporation in different concentrations: adhesive with 0.5% RES (RES0.5), adhesive with 1% RES (RES1), adhesive with 2% RES (RES2), and adhesive with no RES incorporation (RES0—control group). The µTBS test was conducted on 40 human molars with dentin exposure, which were etched, bonded with the adhesives (n = 10), and restored with resin composite. Fourier Transform Infrared Spectroscopy (FTIR) measured the DC for the MFS; ten adhesive sticks were made for each group. Antibacterial activity was assessed using colony-forming unit (CFU) counts. For µTBS, no difference between the groups was found (mean ± SD): RES0.5—42.93 ± 15.49^A; RES1—42.61 ± 13.97^A and RES2—39.43 ± 9.14^A; RES0—41.01 ± 2.64^A. The DC (% ± SD) of the experimental groups was similar: RES0.5—81.02 ± 1.95^A; RES1—76.02 ± 9.00^A; RES2—58.86 ± 15.94^A; RES0—77.75 ± 3.22^A. For MFS (mean ± SD): RES0.5—33.14 ± 13.83^A; RES1—31.1 ± 12.21^A; RES2—19.72 ± 5.43^B; RES0—29.72 ± 11.95^A. For CFU (mean ± SD): RES0.5—0.67 × 10⁷ ± 0.37^B; RES1—0.68 × 10⁷ ± 0.34^B; RES2—0.60 × 10⁷ ± 0.02^C; RES0—0.75 × 10⁷ ± 0.03^A. The incorporation of resveratrol into the adhesive system at low concentrations (0.5 and 1%) does not alter the bond strength of the adhesive interface, the degree of conversion, or the flexural strength. Additionally, both concentrations exhibited antibacterial properties by reducing the colony-forming units of S. mutans. Full article