Search Results (126)

Vegetation strongly influences soil formation, yet its effect on Rare Earth Element (REE) distribution and fractionation across treeline ecotones remains insufficiently constrained. The present study investigated how contrasting plant communities, Vaccinium myrtillus heathlands and Picea abies forests, affect pedogenetic pathways and REE behavior in sandstone-derived soils of the Northern Apennines (Italy). Six soil profiles were characterized for bulk geochemistry, selective Fe–Al extractions, particle-size distribution, and REE concentrations. Principal component analysis and hierarchical clustering identified pedogenetic drivers and horizon groupings. Under Vaccinium myrtillus, thick acidic organic horizons promoted organo-metal complexation and incipient podzolization, whereas Picea abies soils showed thinner organic layers and enhanced mineral weathering, leading to Bw development with higher silt–clay contents and elevated Al/N ratios. These pathways were captured by Fe–Al indicators and the Spodic Index. REE distributions showed vegetation-related differences in surface horizons and Eu–Ce anomalies, but they did not reproduce Fe–Al pedogenetic clusters, reflecting strong parent-material control. The coexistence of podzolic and cambic pathways at the treeline highlights pronounced spatial heterogeneity and vegetation effects. Plant composition may redirect pedogenesis, influencing nutrient cycling and metal mobility. Additionally, these findings emphasize the need to integrate multivariate statistics with established pedogenetic indicators when evaluating geochemical properties in mountain soils. Full article

Hieracium L. s. str. is a taxonomically critical genus of perennial herbaceous plants widely distributed across temperate regions of Europe, Asia, and North America. In Italy, its diversity is mainly concentrated in the Alps and northern Apennines, whereas southern Italy hosts only a limited number of relict taxa. Recent floristic surveys conducted in the Pollino National Park (southern Italy) revealed the presence of five Hieracium taxa, which were subsequently subjected to critical taxonomic evaluation. Detailed morphological analyses, supported by original herbarium comparisons and multivariate morphometric analyses, resulted in the description of a new species, here named H. petrocastellanum, the confirmation of H. pallescens subsp. tephrochlorum in the Italian flora after nearly 130 years from its discovery, and the first record for the Pollino area of H. symphytifolium, previously considered endemic to the Madonie Mountains (north-central Sicily), as well as H. pellitum subsp. pellitum and H. caesioides subsp. caesioides. The new species, Hieracium petrocastellanum, differs in having basal leaves with cuneate bases, only 0–1 cauline leaves, and bracts with sparse simple hairs and moderately dense glandular hairs. Ecological information and data on taxonomic relationships are also provided. The conservation status is assessed for H. petrocastellanum, H. pallescens subsp. tephrochlorum, and H. symphytifolium. An analytical key is presented to distinguish the new species from its closest relatives. These results confirm the Pollino National Park as a biodiversity hotspot and improve current knowledge of Hieracium. Full article

This study evaluates the capability of multi-temporal vegetation indices derived from Sentinel-2 imagery to indicate groundwater discharge in a forested mountainous sector of the Northern Apennines (Italy). The NDVI was computed from Level-2A surface reflectance data (10 m resolution) and analyzed over five growing seasons (2017–2021), encompassing recurrent summer droughts. Aridity conditions were quantified using the Standardized Precipitation–Evapotranspiration Index (SPEI) derived from long-term meteorological records. The methodological framework integrates cloud-masked satellite observations, drought characterization, and spatial statistical comparison between known spring discharge zones and randomly distributed forested control points. NDVI values extracted within 100 m radius buffers, centered on spring outlets, were systematically compared with those from control areas located outside the shallow-water-table influence zone. During periods of negative SPEI (moderate-to-severe drought), spring-centered buffers consistently exhibited higher NDVI values than control sites, with the NDVI contrast increasing under severe arid conditions. This pattern indicates enhanced vegetation resilience supported by shallow groundwater availability. The results demonstrate that vegetation health anomalies, when constrained by homogeneous land cover and a consistent hydrogeological setting, can serve as indicators of the groundwater discharge likelihood. The proposed workflow provides a reproducible and cost-effective tool to support hydrogeological reconnaissance and spring inventorying in rugged mountainous environments where field-based surveys are logistically demanding. Full article

This research assessed current and future climatic suitability for Crocus sativus L. cultivation across Italy, using species distribution models. A dataset of 721 georeferenced points from sites consistently producing top-quality saffron was combined with bioclimatic variables from the CHELSA v2.1 database. Habitat suitability was modelled with MaxEnt and projected under current (2025) climatic conditions and future scenarios for mid-century (2055) and late-century (2085), based on the GFDL-ESM4 model and the SSP3-7.0 emission scenario. The MaxEnt model showed moderate predictive performance (AUC = 0.73 ± 0.02; TSS = 0.37 ± 0.03), which is consistent with the broad ecological tolerance of C. sativus. Current suitable areas (90,049 km²) are mainly in central and northern Italy, especially along the hilly Apennines and much of the Po Plain. Response curves indicate that optimal saffron cultivation occurs mainly under moderately continental conditions, with moderate to high temperature seasonality (6.5–7.5 °C), cool winter temperatures (mean of the driest quarter 0–3.5 °C), and relatively high precipitation during the wettest month (150–250 mm). Future projections show an expansion of suitable areas (124,552 km² in 2055; 123,868 km² in 2085) and a spatial shift from lowlands and coasts toward hilly and mountain regions of the Apennines, the Alps, and the main islands. These findings can support farmers, land managers, and policy-makers in informed planning and sustainable management of saffron cultivation under climate change. Full article

The Marnoso-arenacea basin (MaB) of the Northern Apennines represents one of the most significant lower–middle Miocene foredeep turbidite systems in the Mediterranean region. While the northern part of the basin (Emilia-Romagna Region) has been extensively investigated, the Umbrian portion remains less understood, particularly concerning high-resolution stratigraphic and structural frameworks. This study integrates detailed field mapping, physical stratigraphy, biostratigraphic data from calcareous nannofossils, and petrographic analyses of arenites and calcarenites to reconstruct the tectono-stratigraphic evolution of the MaB in the Umbrian portion of the basin. The basin is divided into three main tectono-stratigraphic units: Afra-Mt. Verde, Pietralunga–Gubbio–Valtopina and Mt. Vicino. The middle unit is detailed by means of stratigraphic architecture and sedimentary characteristics, which allow us to identify two distinct sub-units. Several carbonate and hybrid turbidite beds, including the Contessa megabed, serve as regional key markers, enabling robust stratigraphic correlations. Two mass-transport complexes (MTDs) have been identified and dated, revealing close relationships between sedimentation patterns and thrust propagation. Modal petrographic data indicate a mixed provenance, from the Alpine and Apennine regions, changing over time in response to tectonic segmentation. These findings enhance our understanding of the internal organization of the MaB and provide new insights into the foredeep’s paleogeography and tectono-sedimentary evolution during the Langhian–Serravallian stages. Full article

This study presents a new 1:10,000 geological map of the Monte Bove area (northern Apennines), produced through an original field survey, which allows a detailed reconstruction of Jurassic tectono-sedimentary evolution. The area is characterized by three wedge-shaped structural highs that emerged from the basin floor due to extensional tectonics, following the demise of the Early Jurassic carbonate platform. Stratigraphic and geometric relationships indicate that these highs were already established by the earliest Pliensbachian, bounded by steep fault escarpments and locally mantled by condensed pelagic deposits. Through the Jurassic, the fault-bounded blocks were progressively buried by predominantly micritic pelagic sediments, with evidence of onlap, unconformities, and reworking. The new geological map allows precise delineation of fault geometries and depositional contacts, highlighting the importance of synsedimentary tectonics in shaping basin architecture and documenting a consistent structural trend. Full article

This work presents a new 1:10,000-scale geological map of the Frasassi area (central Italy), integrating recent surface and cave surveys. The map is complemented by new data on the lithostratigraphic characterisation of the Calcare Massiccio Formation (MAS), which forms the core of the local Jurassic structural high. This refined analysis allows for a more detailed subdivision of the MAS and better correlation with the overlying condensed Jurassic succession (BU) and surrounding Maiolica Formation (MAI). The map documents the complex tectono-sedimentary contacts between these units, highlighting the geometry of the MAS–MAI boundary and the occurrence of neptunian dykes both at the surface and within the cave system. The proposed structural interpretation suggests that the Frasassi high was an elongated NW–SE block bounded by conjugate oblique-slip normal faults later reactivated during folding. The results refine the understanding of Jurassic paleogeography and post-Jurassic deformation in the northern Apennines and provide an updated framework to support future geological studies in the area. Full article

In recent decades, increasing anthropogenic pressure and climate change have made the protection and sustainable management of groundwater resources essential. In this context, the identification of aquifer recharge zones, especially those characterized by rapid groundwater flow and high vulnerability to surface pollution sources, becomes a priority for the protection of underground resources. In the Po Plain (northern Italy), based on the lithological, geometric, hydraulic, and hydrodynamic characteristics of the aquifers, the recharge areas are mainly located in the alluvial fans of the Alpine and Apennine foothills. Due to the high hydraulic conductivity of the aquifer, the shallow depth of the water table and the agricultural activities, groundwater resources are vulnerable to nitrate (NO₃⁻) contamination. Given this background, the present study introduces a novel methodological approach based on the geochemical signature of groundwater, indicated by the presence of bicarbonate (HCO₃⁻) and NO₃⁻ ions, aimed at identifying aquifer recharge areas. Specifically, by analyzing time series of NO₃⁻ and HCO₃⁻ concentrations for the period 2012–2023, and applying criteria of an HCO₃⁻/NO₃⁻ ratio < 10 and NO₃⁻ > 30 mg/L, it was possible to identify areas where aquifer recharge processes are clearly evident. These recharge processes are rapid, as confirmed by the hydraulic gradient, the high hydraulic conductivity of the aquifers, and further supported by the isotopic composition of groundwater, especially tritium concentrations. Furthermore, due to the hydrogeological characteristics of the surveyed region, which resemble those of alluvial basins in close proximity to mountain ranges, the methodology and findings of this study can be used as an unconventional and expedited method for similar research conducted globally, offering hope for the future of groundwater research. Full article

Assessing soil fertility is a complex task as it is determined by natural and anthropogenic factors, including specific agronomic interventions (e.g., fertilization and crop rotation) and broader soil management (e.g., tillage and drainage). For agricultural management, soil represents a primary production factor whose chemical–physical characteristics and macro-elements content must be known. This work presents the maps of three macronutrients, i.e., N, K, and P, in the topsoils (0–30 cm layer) of the Emilia-Romagna (21,710.1 km²) region in NE Italy. The maps and associated uncertainty at 100 m resolution were obtained via digital soil mapping (DSM) resorting to Quantile Random Forests using topsoil data from the regional soil database (N = 34,750). As Emilia-Romagna is characterized by two distinct major landforms, i.e., the intensively cultivated alluvial plain and the extensively managed mountain range of the Northern Apennines, each representing nearly half of the region, two distinct sets of numerical and categorical covariates were used as predictors for the DSM estimation of each macronutrient. Results highlight an average N content of approximately 1.57 ± 0.83 (standard deviation) g kg⁻¹ in the alluvial plain and of 1.63 ± 0.49 g kg⁻¹ in the Apennines. For exchangeable potassium (K), concentrations were 275.90 ± 92.6 mg kg⁻¹ and 210.2 ± 86.3 mg kg⁻¹ in the plain and Apennines, respectively. A stark contrast was observed for available phosphorus (P), with mean values of 40.4 ± 11.0 mg kg⁻¹ in the alluvial plain, dropping to 15.2 ± 6.1 mg kg⁻¹ in the Apennines. Such results provide useful information for assessing the fertility of regional soils and provide a reference baseline for soil quality monitoring. The resulting macronutrient maps were eventually compared with those based on the Land Use and Cover Area frame Survey (LUCAS), which represents the reference baselines at the EU scale. Full article

The study of faults in seismic gap areas is essential for assessing the potential for future seismic activity and developing strategies to mitigate its impact. In this research, we employed a combination of geomorphological analysis, aerophotogrammetry, high-resolution topography, and soil analysis to estimate the age of tectonically exposed fault surfaces in a seismic gap area. Our focus was on the Piano delle Rose Fault in the northern Calabria region, (southern Italy), which is a significant regional tectonic structure associated with seismic hazards. We conducted a field survey to carry out structural and pedological observations and collect soil samples from the fault surface. These samples were analyzed to estimate the fault’s age based on their features and degree of pedogenic development. Additionally, we used high-resolution topography and aerophotogrammetry to create a detailed 3D model of the fault surface, allowing us to identify features such as fault scarps and offsets. Our results indicate recent activity on the fault surface, suggesting that the Piano delle Rose Fault may pose a significant seismic hazard. Soil analysis suggests that the onset of the fault surface is relatively young, estimated in an interval time from 450,000 to ~ 300,000 years old. Considering these age constraints, the long-term slip rates are estimated to range between ~0.12 mm/yr and ~0.33 mm/yr, which are values comparable with those of many other well-known active faults of the Apennines extensional belt. Analyses of key fault exposures document cumulative displacements up to 21 m. These values yield long-term slip rates ranging from ~0.2 mm/yr (100,000 years) to ~1.0 mm/yr (~20,000 years LGM), indicating persistent Late Quaternary activity. A second exposure records ~0.6 m of displacement in very young soils, confirming surface faulting during recent times and suggesting that the fault is potentially capable of generating ground-rupturing earthquakes. High-resolution topography and aerophotogrammetry analyses show evidence of ongoing tectonic deformation, indicating that the area is susceptible to future seismic activity and corresponding risk. Our study highlights the importance of integrating multiple techniques for examining fault surfaces in seismic gap areas. By combining geomorphological analysis, aerophotogrammetry, high-resolution topography, and soil analysis, we gain a comprehensive understanding of the structure and behavior of faults. This approach can help assess the potential for future seismic activity and develop strategies for mitigating its impact. Full article

The energy transition is an issue of fundamental importance in the current global context, as an increasing number of countries are committed to searching for minerals and elements essential for the storage, distribution, and supply of energy derived from new renewable and sustainable sources. In some countries, these elements (such as boron, lithium, and strontium) are considered to be critical raw materials (CRMs) because of their limited occurrence within their own borders and are commonly found in minerals and geothermal–formation waters, especially in brackish to brine waters. In the Italian territory, CRM-rich waters have already been identified by previously published studies (i.e., with mean concentrations in the Salsomaggiore Terme of 390 mg/L of boron, 76 mg/L of lithium, and 414 mg/L of strontium); however, their extraction is hampered by several knowledge gaps. In particular, a comprehensive understanding of the origin, accumulation processes, and migration pathways of these CRM-rich waters is still lacking. These factors are closely linked to the geological framework and evolutionary history of each specific area. To address these gaps, we investigated the Salsomaggiore Structure that is located at the northwestern front of the Apennine in Italy by integrating geological data with hydrogeochemical results. We constructed new preliminary distribution maps of the most significant CRMs around the Salsomaggiore Structure, which can be used in the future for the National Mineral Exploration Program drawn up in accordance with the European Critical Raw Materials Act. These maps, combined with the interpretation of seismic reflection profiles calibrated with surface geology and wells, allowed us to establish a close relationship between water geochemistry/CRM contents and the geological evolution of the Salsomaggiore Structure. This structure can be considered representative of the frontal ranges of the Northwestern Apennine and other mountain chains associated with the foreland basin systems. Full article

Cave crickets of the genus Dolichopoda (Orthoptera; Rhaphidophoridae) represent a key component of cave ecosystems. In Italy, nine species are currently known, distributed from the northwestern regions to the southernmost Apennines, with occurrences also along various Tyrrhenian coastal areas and islands, including Sardinia. In this study, we focus on the Apennine region, where we sampled 18 populations of Dolichopoda spp. and sequenced mitochondrial markers (cox1 and 16S) from newly collected individuals to investigate their distribution and genetic diversity. Our analyses identified two previously unrecognized lineages within D. geniculata. Moreover, the sampled caves in the northern Apennines allowed us to refine the distributional ranges of D. geniculata, D. letitiae, and D. schiavazzii. Finally, we provide comments to support a future taxonomic revision of the group. Full article

Recent sampling efforts in northern Algeria and the investigation of some collection material has revealed the presence of taxa with conchological and genital morphological similarities to the “Candidula-like” group. A detailed investigation of the anatomy of the genitalia combined with the analysis of two mitochondrial and two nuclear markers of representatives of the known genera as well as two Algerian taxa has been conducted. The result confirms the affiliation of the latter in the “Candidula-like” complex. Comparative anatomical analysis led to the description of a new genus, Kherattolactea gen. nov., endemic to northern Algeria with Xerophila keratae Kobelt 1892 as the type species. The anatomical distinction corroborates the result of the molecular analysis that reveals apomorphic nucleotide substitution. Moreover, the result of the combined analysis provides the first confirmed record of the genus Orexana Chueca, Gómez-Moliner, Madeira & Pfenninger, 2018, in north Africa, represented by the species Orexana lemoinei (Kobelt, 1882) nov. comb. A new Xerogyra species, Xerogyra hallgassi nov. sp., from the Apennine Mountain has been described based on the combination of morphoanatomical and molecular traits. For the first time, the morphoanatomical description of the known Xerogyra species has been presented. Full article

Beech forests in the Italian peninsula are actively managed and they also support a high level of biodiversity. Hence, biodiversity conservation can be synergistic with timber production and carbon sequestration, enhancing the overall economic benefits of forest management. This study aimed to evaluate the effect of forest management regimes on bird communities in the Italian Peninsula during 2022 through audio recordings. We studied the structure, composition, and specialization of the breeding bird community in four managed beech stands (three even-aged beech stands aged 20, 60, and 100 years old, managed by a uniform shelterwood system; one uneven-aged stand, managed by a single-tree selection system) and one uneven-aged, unmanaged beech stand in the northern Apennines (Tuscany region, Italy). Between April and June 2022, data were collected through four 1-hour audio recording sessions per site, analyzing 5 min sequences. The unmanaged stand hosted a richer (a higher number of species, p < 0.001) and more specialized (a higher number of cavity-nesting species, p < 0.001; higher Woodland Bird Community Index (WBCI) values, p < 0.001; and eight characteristic species, including at least four highly specialized ones) bird community, compared to all the managed forests; moreover, the latter were homogeneous (similar to each other). Our study suggests that the unmanaged beech forests should be a priority option for conservation, while in terms of the managed beech forests, greater attention should be paid to defining the thresholds for snags, deadwood, and large trees to be retained to enhance their biodiversity value. Studies in additional sites, conducted over more years and including multi-taxon communities, are recommended for a deeper understanding and generalizable results. Full article

UAV platforms equipped with RTK positioning and LiDAR sensors are increasingly used for landslide monitoring, offering frequent, high-resolution surveys with broad spatial coverage. In this study, we applied high-frequency UAV-based monitoring to the active Baldiola earthflow (Northern Apennines, Italy), integrating 10 UAV–LiDAR and photogrammetric surveys, acquired at average intervals of 14 days over a four-month period. UAV-derived orthophotos and DEMs supported displacement analysis through homologous point tracking (HPT), with robotic total station measurements serving as ground-truth data for validation. DEMs were also used for multi-temporal DEM of Difference (DoD) analysis to assess elevation changes and identify depletion and accumulation patterns. Displacement trends derived from HPT showed strong agreement with RTS data in both horizontal (R² = 0.98) and vertical (R² = 0.94) components, with cumulative displacements ranging from 2 m to over 40 m between April and August 2024. DoD analysis further supported the interpretation of slope processes, revealing sector-specific reactivations and material redistribution. UAV-based monitoring provided accurate displacement measurements, operational flexibility, and spatially complete datasets, supporting its use as a reliable and scalable tool for landslide analysis. The results support its potential as a stand-alone solution for both monitoring and emergency response applications. Full article