Search Results (493)

The widespread adoption of liquefied natural gas (LNG) as a marine fuel has driven the development of LNG bunkering operations in global ports. Major international hubs, such as Shenzhen Port, have implemented ship-to-ship (STS) bunkering practices. However, this process entails unique safety risks, particularly hazards associated with vapor cloud dispersion caused by bunkering hose releases. This study employs the Phast software developed by DNV to systematically simulate LNG release scenarios during STS operations, integrating real-world meteorological data and storage conditions. The dynamic effects of transfer flow rates, release heights, and release directions on vapor cloud dispersion are quantitatively analyzed under daytime and nighttime conditions. The results demonstrate that transfer flow rate significantly regulates dispersion range, with recommendations to limit the rate below 1500 m³/h and prioritize daytime operations to mitigate risks. Release heights exceeding 10 m significantly amplify dispersion effects, particularly at night (nighttime dispersion area at a height of 20 m is 3.5 times larger than during the daytime). Optimizing release direction effectively suppresses dispersion, with vertically downward releases exhibiting minimal impact. Horizontal releases require avoidance of downwind alignment, and daytime operations are prioritized to reduce lateral dispersion risks. Full article

Given that cryogenic pumps on liquefied natural gas (LNG) carriers are prone to cavitation under complex operating conditions, this paper examines the inducer of an LNG centrifugal pump to uncover how the inducer geometry affects both the cavitation behavior and internal flow-induced excitation at −163 °C. Through detailed numerical simulations, we evaluate the cavitation performance and flow excitation characteristics across a range of inducer designs, systematically varying the blade count, inlet and outlet angles, and blade wrap angle. Our results show that reducing the number of blades, together with properly optimized inlet/outlet and wrap angles, significantly enhances the cavitation resistance. These findings provide a solid theoretical basis and practical guidance for the engineering optimization of LNG ship pumps. Full article

Many low-temperature applications, such as rocket engines and liquefied natural gas (LNG) transport pumps, necessitate ultra-low-temperature operational environments. In these conditions, the properties of lubricating oils and greases are significantly influenced by temperature, leading to the widespread adoption of solid lubrication. Currently, there is no international research regarding the influence of bearing coatings on the subsurface stress distribution in raceways. The Lundberg–Palmgren (L-P) theory states that subsurface stress variations govern bearing lifespan. Therefore, this paper utilizes existing formulas and Python programming to calculate the subsurface stress field of the inner raceway in a MoS₂ solid-lubricated angular contact ball bearing. Furthermore, it analyzes the impacts of factors such as coating material properties, slide-to-roll ratio, traction coefficient, and load on its subsurface stress field. The results reveal that for solid-lubricated ball bearings, as the load increases, the maximum subsurface stress shifts closer to the center of the contact area, and the maximum subsurface shear stress becomes more concentrated. As the traction coefficient increases, the stress on the XZ-plane side increases and its position moves closer to the surface, while the opposite trend is observed on the other side. Additionally, the maximum value of the subsurface von Mises stress is approximately 0.64P₀, and the maximum value of the orthogonal shear stress component τ_yz in the subsurface is approximately 0.25P₀. Full article

Natural vaporization in LPG (liquefied petroleum gas) tanks refers to the process where liquid LPG is converted to vapor naturally due to ambient heat. This natural vaporization process relies on ambient heat from the surroundings, which is transferred through the walls of the LPG tank. The natural vaporization rate depends on several factors, such as the ambient temperature, the surface area of the tank in contact with the liquid (i.e., the filling fraction), the exact composition of LPG, and the design and positioning of the LPG tank. When natural vaporization rates cannot meet the gas demand, as in the case of colder climates and large commercial applications, an additional LPG vaporizer will be necessary. The obtained results revealed that pure propane at an operating pressure of 1.75 bar achieves specific vaporization rates per unit of tank surface area of 0.7 kg/h/m², which decreases to 0.4 and 0.25 kg/h/m² for LPG mixtures with 20% and 40% butane, respectively. For a lower operating pressure of 1.10 bar, the specific vaporization rate per unit of tank surface area is 1.0 kg/h/m² for pure propane, 0.85 kg/h/m² for 20% butane, and 0.70 kg/h/m² for 40% butane. Full article

Liquefied natural gas (LNG) is increasingly used as a marine fuel due to its capacity to significantly reduce emissions of particulate matter, sulfur oxides (SO_x), and nitrogen oxides (NO_x), compared to conventional fuels. In addition, LNG combustion produces less carbon dioxide (CO₂) than conventional marine fuels, and the use of non-fossil LNG offers further potential for reducing greenhouse gas emissions. However, this benefit can be partially offset by methane slip—the release of unburned methane in engine exhaust—which has a much higher global warming potential than CO₂. This study presents an experimental evaluation of methane emissions from a RoPax vessel powered by low-pressure dual-fuel four-stroke engines with a direct mechanical propulsion system. Methane slip was measured directly during onboard testing and combined with a year-long analysis of engine operation using an Engine Load Monitoring (ELM) method. The yearly average methane slip coefficient (C_slip) obtained was 1.57%, slightly lower than values reported in previous studies on cruise ships (1.7%), and significantly lower than the default values specified by the FuelEU (3.1%) Maritime regulation and IMO (3.5%) LCA guidelines. This result reflects the ship’s operational profile, characterized by long crossings at high and stable engine loads. This study provides results that could support more representative emission assessments and can contribute to ongoing regulatory discussions. Full article

The maritime industry remains a significant contributor to global greenhouse gas (GHG) emissions. In this article, a systematic study has been performed on the alternative fuel emissions of large cargo ships under different route scenarios and propulsion systems. For this purpose, a set of key performance indicators (KPIs) are evaluated, including total equivalent CO₂ emissions (CO_2eq), CO_2eq emissions per unit of transport mass and CO_2eq emissions per unit of transport mass per distance. The emissions analysis demonstrates that Liquified Natural Gas (LNG) paired with Marine Gas Oil (MGO) emerges as the most viable short-term solution in comparison with the conventional fuel oil propulsion. Synthetic methanol (eMeOH) paired with synthetic diesel (eDiesel) is identified as the most promising long-term fuel combination. When comparing the European Union (EU) emission calculation system (FuelEU) with the International Maritime Organization (IMO) emission metrics, a discrepancy in emissions reduction outcomes has been observed. The IMO approach appears to favor methanol (MeOH) and liquefied natural gas (LNG) over conventional fuel oil. This is attributed to the fact that the IMO metrics do not consider unburned methane emissions (methane slip) and emissions in the production of fuels (Well-to-Tank). Full article

Stainless steel, due to its exceptional comprehensive properties, has been widely adopted as the primary material for liquid cargo tank containment systems and pipelines in liquefied natural gas (LNG) carriers. However, challenges such as hot cracking, excessive deformation, and the deterioration of welded joint performance during stainless steel welding significantly constrain the construction quality and safety of LNG carriers. While conventional tungsten inert gas (TIG) welding can produce high-integrity welds, it is inherently limited by shallow penetration depth and low efficiency. Magnetic field-assisted TIG welding technology addresses these limitations by introducing an external magnetic field, which effectively modifies arc morphology, refines grain structure, enhances penetration depth, and improves corrosion resistance. In this study, TIG bead-on-plate welding was performed on 304 stainless steel plates, with a systematic investigation into the dynamic arc behavior during welding, as well as the microstructure and anti-corrosion properties of the deposited metal. The experimental results demonstrate that, in the absence of a magnetic field, the welding arc remains stable without deflection. As the intensity of the alternating magnetic field intensity increases, the arc exhibits pronounced periodic oscillations. At an applied magnetic field intensity of 30 mT, the maximum arc deflection angle reaches 76°. With increasing alternating magnetic field intensity, the weld penetration depth gradually decreases, while the weld width progressively expands. Specifically, at 30 mT, the penetration depth reaches a minimum value of 1.8 mm, representing a 44% reduction compared to the non-magnetic condition, whereas the weld width peaks at 9.3 mm, corresponding to a 9.4% increase. Furthermore, the ferrite grains in the weld metal are significantly refined at higher alternating magnetic field intensities. The weld metal subjected to a 30 mT alternating magnetic field exhibits the highest breakdown potential, the lowest corrosion rate, and the most protective passive film, indicating superior corrosion resistance compared to other tested conditions. Full article

This study examines how the Russia–Ukraine conflict has affected the robustness of the global liquefied natural gas (LNG) trade network—an essential component of the global energy transition. As environmental concerns intensify worldwide, LNG is gaining strategic importance due to its cleaner emissions and greater flexibility compared to traditional fossil fuels. However, the global LNG trade network remains vulnerable to geopolitical shocks, particularly due to its concentrated structure. In this context, we construct the LNG trade network from 2020 to 2023 and employ complex network analysis to explore its structural characteristics. We assess network robustness under various attack strategies, budget constraints, and phases of the conflict. Furthermore, we utilize the difference-in-differences (DID) method to evaluate the conflict’s impact on network robustness. Our findings reveal that the global LNG trade network exhibits a distinct center–periphery structure and regional clustering. Although the network scale has continuously expanded, its connectivity still requires improvement. The Russia–Ukraine conflict has significantly weakened network robustness, with negative impacts intensifying across attack phases and under greater budget constraints. The optimal attack strategy causes the most severe degradation, followed by high-importance attacks, while random and low-importance attacks exert limited influence. Our DID-based analysis further confirms the conflict’s significant negative impact. To strengthen its resilience, the global LNG trade network should diversify its partnerships and invest in infrastructure enhancements. Full article

The southern Baltic Sea is characterized by highly variable weather conditions, particularly in autumn and winter, when storms, strong westerly winds, and temporary sea ice formation disrupt maritime operations. This study presents a climatographic overview and evaluates key hydrometeorological factors that influence the safe and efficient use of liquefied natural gas (LNG) as bunkering fuel in the region. The analysis draws on long-term meteorological and hydrological datasets (1971–2020), including satellite observations and in situ measurements. It identifies operational constraints, such as wind speed, wave height, visibility, and ice cover, and assesses their impact on LNG logistics and terminal functionality. Thresholds for safe operations are evaluated in accordance with IMO and ISO safety standards. An ice severity forecast for 2011–2030 was developed using the ECHAM5 global climate model under the A1B emission scenario, indicating potential seasonal risks to LNG operations. While baseline safety criteria are generally met, environmental variability in the region may still cause temporary disruptions. Findings underscore the need for resilient port infrastructure, including anti-icing systems, heated transfer equipment, and real-time environmental monitoring, to ensure operational continuity. Integrating weather forecasting into LNG logistics supports uninterrupted deliveries and contributes to EU goals for energy diversification and emissions reduction. The study concludes that strategic investments in LNG infrastructure—tailored to regional climatic conditions—can enhance energy security in the southern Baltic, provided environmental risks are systematically accounted for in operational planning. Full article

High permeance combined with high salt/dye separation efficiency is a prerequisite for achieving zero-liquid-discharge treatment of saline textile wastewater by membrane technology. Thin-film nanocomposite (TFN) membranes incorporating porous nanoparticles offer a promising route to overcome the permeability–selectivity trade-off of conventional polymer membranes. In this study, a vacuum-assisted method was used to co-blend ZIF-67 and SiO₂ nanoparticles, while branched polyethyleneimine (PEI) served as a cross-linking bridge, resulting in a high-performance TFN membrane for salt/dye separation. Acting as a molecular connector, PEI coordinated with ZIF-67 through metal–amine complexation and simultaneously formed hydrogen bonds with surface hydroxyl groups on SiO₂, thereby linking ZIF-67 and SiO₂. The resulting membrane exhibited good hydrophilicity and excellent dye separation performance (water flux = 359.8 L m⁻² h⁻¹ bar⁻¹; Congo Red rejection = 99.2%) as well as outstanding selectivity in dye/salt mixtures (Congo Red/MgCl₂ selectivity of 1094). The optimal ZIF@SiO₂-PEI membrane maintained stable dye rejection over a wide range of trans-membrane pressures, initial concentrations, and pH values. These results reveal the huge potential of applying the ZIF@SiO₂-PEI TFN membranes for resource recovery in sustainable textile wastewater systems. Full article

This study proposes a novel non-destructive methodology for assessing structural integrity in liquefied natural gas (LNG) carrier cargo containment systems (CCSs), addressing limitations of conventional inspection techniques like visual inspection and vacuum box testing. The method leverages strain-induced martensitic transformation (SIMT) in austenitic stainless steel (SUS304L), widely used in CCS membranes, quantifying magnetic permeability increase via a Feritscope to evaluate deformation history and damage. To analyze SUS304L SIMT behavior, uniaxial tensile (UT) and equi-biaxial tensile (EBT) tests were conducted, as these stress states predominate in CCS membranes. Microstructural evolution was examined using X-ray diffraction (XRD) and electron backscatter diffraction (EBSD), allowing a quantitative assessment of the transformed martensite volume fraction versus plastic strain. Subsequently, Feritscope measurements under the same conditions were calibrated against the XRD-measured martensite volume fraction for accuracy. Based on testing, this study introduces three complementary Feritscope approaches for evaluating CCS health: outlier detection, quantitative damaged area analysis, and time-series analysis. The methodology integrates data-driven quantitative assessment with conventional qualitative inspection, enhancing safety and maintenance efficiency. Full article

Based on the theoretical framework of Multivariate Stochastic Volatility (MSV), this paper combines the Dynamic Generalized Correlation (DGC) model with the t-distribution, establishes the DGC-t-MSV model, and employs the Markov Chain Monte Carlo (MCMC) algorithm based on the Bayesian principle for efficient estimation to investigate the price volatility spillover effects in China’s energy supply chains. The results of this study indicate the following: (1) The upstream crude oil spot price has a positive spillover effect on the midstream freight price. The downstream diesel market price, 92 gasoline market price, and 95 gasoline market price all exert positive volatility spillovers on the midstream crude oil freight price. (2) The volatility spillover effect between the upstream power coal price and the midstream coal freight price exhibits unidirectionality, and the volatility is transmitted from the power coal price to the coal freight price. (3) The upstream natural gas price and the midstream liquefied natural gas market price display asymmetric characteristics. Among them, the upstream natural gas price has a unidirectional and more pronounced positive volatility spillover effect on the midstream liquefied natural gas market price. Full article

This study addresses inlet flow distribution and pressure pulsation-induced vibration in LNG dual-pump parallel systems. We investigate an LNG dual-submerged pump tower system. Our approach combines computational fluid dynamics with vortex dynamics theory. We examine inlet flow characteristics under different flow conditions. Pressure pulsation propagation patterns are analyzed. System stability mechanisms are investigated. A 3D model incorporates inducers, impellers, guide vanes, outlet sections, and base structures. The SST k-ω turbulence model and Q-criterion vortex identification reveal key features. Results show minimal head differences during parallel operation. The inlet flow field remains uniform without significant vortices. However, local low-velocity zones beneath the base may cause flow separation at low flows. Pressure pulsations are governed by guide vane rotor–stator interactions. These disturbances propagate backward to impellers and inducers. Outlet sections show asymmetric pressure fluctuations. This asymmetry results from spatial positioning differences. Complex base geometries generate low-intensity vortices. Vortex intensity stabilizes at higher flows. These findings provide theoretical foundations for vibration suppression. Full article

Utilizing the considerable cold energy in liquefied natural gas (LNG) through the organic Rankine cycle is a highly important initiative. A multi-stage Rankine-based power generation system using LNG cold energy for waste heat utilization was proposed in this study. Moreover, a comprehensive assessment method was used to select the working fluid for this proposed system. Not only were thermodynamic and economic indicators considered, but also the environmental impact of candidate working fluids was taken into account in the evaluation process. The optimal operating points of the system were determined using non-dominated sorting genetic algorithm II and TOPSIS methods, while employing Gray Relational Analysis was applied to compute the gray relational coefficients of candidate working fluids at the optimal operating points. In addition, four weighting methods were used to calculate the final gray correlation degree of the candidate working fluids by considering the weighting influence. The stability of the calculated gray correlation degree was observed by performing a standard deviation analysis. The results indicate that R245ca was chosen as the optimal working fluid due to its superior performance based on the entropy weighting method, the independent weighting coefficient method, and the mean weighting method. Simultaneously, R245ca exhibits the best specific net power output and levelized cost of energy values of 0.283 USD/kWh and 106.9 kWh/t, respectively, among all candidate working fluids. The gray correlation degree of R1233zd(E) is 0.948, exceeding that of R245ca under the coefficient of variation method. The gray correlation degree under the mean value method is the most stable, with a standard deviation of only 0.162, while the gray correlation degree under the coefficient of variation method exhibits the greatest fluctuation, with a standard deviation of 0.17, in the stability assessment. Full article

With increasing global energy transition and environmental awareness, liquefied natural gas (LNG) is rapidly developing as an efficient and clean energy source. LNG pumps are widely used in industrial applications. This study focuses on the LNG pump and pipeline system, and it innovatively establishes a computational model based on weak compressible fluid in order to better reflect the characteristics of pressure pulsation and the flow situation. Through numerical simulations, the flow characteristics of the pump were analyzed. In addition, the flow conditions at the pipe tee were analyzed, and the attenuation patterns of pressure waves at different frequencies within the pipe were also investigated. The internal flow field of the pump was analyzed at three specific time points. The results indicate that, during the initial start-up phase, the internal flow state of the pump is complex, with significant vortices and pressure fluctuations. As the flow rate and rotational speed increase, the flow gradually stabilizes. Moreover, the pressure pulsation coefficient within the pipeline varies significantly with position. Full article