Search Results (333)

Icariin (ICA) is widely recognized for its health benefits. In this work, we examined the intermolecular interactions between ICA and proteinase K (PK) via multi-spectroscopic techniques and molecular simulations. The experimental findings revealed that ICA quenched the fluorescence emission of PK by forming a noncovalent complex. Both hydrogen bonding and van der Waals interactions are essential for the complex’s formation. Then Förster resonance energy transfer (FRET), competitive experiments, and synchronous fluorescence spectroscopy were adopted to verify the formation of the complex. Molecular docking studies demonstrated that ICA could spontaneously bind to PK by hydrogen bonding and hydrophobic interactions, which is consistent with the spectroscopic results. The PK-ICA complex’s dynamic stability was evaluated using a 50 ns molecular dynamics (MD) simulation. The simulation results revealed no significant structural deformation or positional changes throughout the entire simulation period. The complex appears to be rather stable, as seen by the average root-mean-square deviation (RMSD) fluctuations for the host protein in the PK-ICA complex of 1.08 Å and 3.09 Å. These outcomes of molecular simulations suggest that ICA interacts spontaneously and tightly with PK, consistent with the spectroscopic findings. The approach employed in this research presents a pragmatic and advantageous method for examining protein–ligand interactions, as evidenced by the concordance between empirical and theoretical findings. Full article

Förster resonance energy transfer (FRET)-based biosensors are versatile tools for obtaining insights into various biological processes. Their working principles are based on nonradiative energy transfer from donor to acceptor fluorophores. This energy transfer is responsible for a change in fluorescence intensity, which provides a basis for the detection of biomolecules. Advantageous features of FRET biosensors include their high sensitivity and specificity. Recently, there have been notable developments to extend the usage of FRET biosensors for diverse applications. In this review, we briefly summarize the state-of-the-art developments of FRET biosensors for cellular imaging, drug discovery, pathogen detection, and cancer diagnosis. Continued research on biosensor design, donor acceptor pair optimization, and integration of innovative materials can further extend the applications of FRET biosensors across health care settings. Full article

A fluorescent sandwich assay was devised to quantify CK-MB. In a typical immunoassay, antibodies bind to the target, and the detected signal is quantified according to the target’s concentration. We innovated a unique fluorescence assay known as the “enzyme-linked aptamer assay” (ELAA) by substituting antibodies with a pair of high-affinity aptamers labelled with biotin, namely apt. A1 and apt. A2. Avidin-labelled ALP binds to biotin-labelled aptamers, hydrolyzing its substrate, 2-phosphoascorbic acid trisodium salt, resulting in the formation of ascorbic acid. The catalytic hydrolysate functions as a reducing agent, causing the deterioration of MoS₂ nanosheets. This results in the transformation of MoS₂ nanosheets into nanoribbons, leading to the release of quenched AGQDs. The reestablishment of fluorescence is triggered by Förster Resonance Energy Transfer (FRET) between the MoS₂ nanoribbons and AGQDs, enhancing the sensitivity of disease biomarker detection. The working range for detection falls between 2.5 nM and 160 nM, and the limit of detection (LOD) for CK-MB is verified at 0.20 nM. Full article

Dye-sensitized solar cells (DSSCs) are promising alternatives for power generation due to their environmental friendliness, cost effectiveness, and strong performance under diffused light. Conversely, their low spectral response in the ultraviolet (UV) region significantly obliterates their overall performance. The so-called luminescent down-shifting (LDS) presents a practical solution by converting high-energy UV photons into visible light that can be efficiently absorbed by sensitizer dyes. Herein, a conventional solid-state technique was applied for the synthesis of an LDS, europium (II)-doped barium orthosilicate (BaSiO₃:Eu²⁺) material. The material exhibited strong UV absorption, with prominent peaks near 400 nm and within the 200–300 nm range, despite a weaker response in the visible region. The estimated optical bandgap was 3.47 eV, making it well-suited for UV absorbers. Analysis of the energy transfer mechanism from the LDS material to the N719 dye sensitizer depicted a strong spectral overlap of $2\times {10}^{10}{\mathrm{M}}^{-1}{\mathrm{c}\mathrm{m}}^{-1}{\mathrm{n}\mathrm{m}}^4$, suggesting efficient energy transfer from the donor to the acceptor. The estimated Förster distance was approximately $6.83\mathrm{n}\mathrm{m}$, which matches the absorption profile of the dye-sensitizer. Our findings demonstrate the potential of BaSiO₃:Eu²⁺ as an effective LDS material for enhancing UV light absorption and improving DSSC performance through increased spectral utilization and reduced UV-induced degradation. Full article

Droplet microfluidics has emerged as a transformative technology that can substantially increase the throughput of antibody “hit” discovery. This review provides a comprehensive overview of the recent advances in this dynamic field, focusing primarily on the technological and methodological innovations that have enhanced the antibody discovery process. This investigation starts with the fundamental principles of droplet microfluidics, emphasizing its unique capabilities for precisely controlling and manipulating picoliter-volume droplets. This discussion extends to various assay types employed in droplet microfluidics, including binding assays, functional assays, Förster Resonance Energy Transfer (FRET) assays, internalization assays, and neutralization assays, each offering distinct advantages for antibody screening and characterization. A critical examination of methods to improve droplet encapsulation is presented, besides addressing challenges such as reducing the leakage of small molecules from droplets and explaining what a “hit” droplet looks like. Furthermore, we assess design considerations essential for implementing high-throughput fluorescence-activated droplet sorting (FADS) workstations and emphasize the need for automation. This review also delves into the evolving commercial landscape, identifying key market players and emerging industry trends. This review paper aims to catalyze further research and innovation, ultimately advancing the field towards more efficient and robust solutions for antibody identification and development. Full article

Peptides designed to interfere with specific steps of viral infection mechanisms have shown promising antiviral potential. In this study, we investigated the ability of a synthetic peptide (peptide 303), derived from the fusion protein sequence of the Infectious Salmon Anemia Virus (ISAV), to inhibit membrane fusion mediated by the ISAV fusion peptide (ISAV-FP1). To assess this, we employed a model membrane system consisting of large unilamellar vesicles (LUVs) composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), dipalmitoylphosphatidylcholine (DPPC), and cholesterol. Membrane fusion kinetics were monitored via R18 fluorescence dequenching. Additionally, the interaction of peptide 303 with lipid membranes was evaluated using fluorescence anisotropy measurements. The potential direct interaction between peptide 303 and ISAV-FP1 was further examined through Förster Resonance Energy Transfer (FRET) assays. Our results demonstrate that peptide 303 effectively inhibits ISAV-FP1-mediated membrane fusion. Furthermore, peptide 303 was shown to interact with lipid bilayers and with ISAV-FP1 itself. These findings suggest a dual inhibitory mechanism in which peptide 303 both prevents ISAV-FP1 binding to the membrane and directly interacts with the fusion peptide, thereby disrupting its fusogenic activity. Full article

Riboswitches regulate gene expression through intricate dynamic conformational transitions, with divalent cation Mg²⁺ and their ligands playing pivotal roles in this process. The dynamic structural mechanism by which the S-adenosyl-L-methionine (SAM) responsive SAM-VI riboswitch (riboSAM) regulates the downstream SAM synthase gene translation remains unclear. In this study, we employed position-selective labeling of RNA (PLOR) to incorporate Cy3-Cy5 into designated positions of riboSAM, applying single-molecule Förster resonance energy transfer (smFRET) method to track its conformational switches in response to Mg²⁺ and SAM. smFRET analysis revealed that in the absence of Mg²⁺ and ligand, riboSAM predominantly adopted a translation-activating apo conformation. Physiological concentrations of Mg²⁺ induced riboSAM to fold into dynamic transit-p and holo-p states, creating a transient and structurally pliable binding pocket for ligand binding. SAM binding locks the dynamic transit-p and holo-p states into their final stable transit and holo conformations through conformational selection, turning off downstream cis-gene expression and completing feedback regulation of cellular SAM concentration. The observed synergistic regulatory effect of Mg²⁺ ions and ligand on riboSAM’s conformational dynamics at single-molecule resolution provides new mechanistic insights into gene regulation by diverse riboswitch classes. Full article

An optimized design of photodetectors and antennas for Förster Resonance Energy Transfer (FRET)-based glucose biosensing in endoscopic capsules is presented. The compact antenna design is tailored for the visible optical frequencies (~526 THz) associated with FRET-based glucose monitoring and integrates structural flexibility to conform to the spatial constraints of endoscopic capsules, such as mechanical bending features. The antenna is embedded in a multimode medium artificial tissue simulating a glucose environment with several layers, providing efficient coupling to the FRET emission signal for glucose sensing. Stable S11 parameters and a maximum gain of 9 dBi are realized by statelier mesh settings, bend adaptation, and cautious SAR constraint handlers. Results of the Specific Absorption Rate (SAR) confirm the limited energy absorption within permissible bounds, confirming its application for biomedical purposes. These results affirm the feasibility of non-invasive glucose measurement in interstitial fluid in this configuration that can be operable through an endoscope with improved sensitivity and functionality. Full article

γ-Secretase has primarily been studied in neurons, whereas increasing evidence highlights its importance in microglia. Previous research has shown that the pharmacological inhibition of γ-secretase impairs microglial phagocytic activity. In this study, we used a genetically encoded Förster resonance energy transfer (FRET)-based biosensor to record γ-secretase activity, aiming to determine if naturally occurring cell-by-cell variations in endogenous γ-secretase activity are associated with phagocytic activity. Using the Notch1 N100 Y-T biosensor, we found that the regulation of endogenous γ-secretase activity varies among individual BV-2 microglial cells. Our multiplexed time-lapse imaging revealed that the phagocytosis of E. coli bioparticles was impaired in cells with lower γ-secretase activity compared to those with higher activity. Complementary biochemical analysis, utilizing Zymosan bioparticles and fluorescence-activated cell sorting (FACS), further demonstrated that cells with reduced phagocytic activity exhibited decreased endogenous γ-secretase activity. Collectively, our confirmatory study supports previous findings that microglial phagocytic activity is closely linked to γ-secretase and emphasizes the essential role of γ-secretase in microglia. Full article

The effects of magnesium and sodium on the interactions between aptamer, its specific ligand, and short complementary oligonucleotides (cDNAs) differing in affinity of their binding with the aptamer were studied. Aflatoxin B1 (AFB1) and AFB1-binding aptamer were used in the study. Dependencies for the aptamer binding with the fluorophore-labeled AFB1 under varied concentrations of the cations were obtained using fluorescence anisotropy measurements. The increase of the aptamer affinity to AFB1 in the presence of cations was demonstrated using fluorescence anisotropy and isothermal calorimetry. The collected data indicate that 300 mM Mg²⁺ (significantly more than the range commonly used in aptamer sensors) provides the best affinity (16.5 ± 2.2 nM) of the aptamer–AFB1 complexation. Sodium decreases the Mg²⁺-modulated affinity at some Na⁺/Mg²⁺ ratios. The aptamer affinity with cDNAs increases with concentration of cations, but not in the same way as for AFB1. Based on the characterized conditions for bimolecular interactions, the ligand-induced displacement of cDNAs was studied with the registration of the Forster fluorescence energy transfer (FRET). The most sensitive revealing of AFB1 (IC10% 3.2 ± 0.3 nM) in this three-compound FRET system was demonstrated for cDNA having an equilibrium constant of the aptamer binding close to the constant of the aptamer–AFB1 reaction. Full article

Time-resolved fluorescence techniques, such as fluorescence lifetime imaging microscopy (FLIM), fluorescence correlation spectroscopy (FCS), and time-resolved fluorescence spectroscopy, are ideally suited for investigating molecular dynamics and interactions in biological and chemical systems. However, the analysis and interpretation of these datasets require advanced computational tools capable of handling diverse models and datasets. This paper presents a comprehensive software solution designed for model generation and analysis of time-resolved fluorescence data with a strong focus on fluorescence for quantitative structural analysis and biophysics. The software supports the integration of multiple fluorescence techniques and provides users with robust tools for performing complex model analysis across diverse experimental data. By enabling global analysis, model generation, data visualization, and sampling over model parameters, the software enhances the interpretability of intricate fluorescence phenomena. By providing flexible modeling capabilities, this solution offers a versatile platform for researchers to extract meaningful insights from time-resolved fluorescence data, aiding in the understanding of dynamic biomolecular processes. Full article

In order to find a good candidate for Förster Resonance Energy Transfer (FRET)-mediated X-ray-induced photodynamic therapy (X-PDT) for the treatment of cancer, lanthanide (Ln)-based AGuIX nanoparticles (NPs) conjugated with Rose Bengal (RB) as a photosensitizer (PS) were synthesized. X-PDT overcomes the problem of the poor penetration of visible light into tissues, which limits the efficacy of PDT in the treatment of deep-seated tumors. It is essential to optimize FRET efficiency by maximizing the overlap integral between donor emission and acceptor absorption and lengthening the duration of the donor emission. In this study, we optimized energy transfer between a scintillator (Sc) as a donor and a PS as an acceptor. Terbium (Tb) and Gadolinium (Gd) as Scs and Rose RB as a PS were chosen. The study of energy transfer between Tb, Gd and RB in solution and chelated on AGuIX NPs proved to be FRET-like. RB was conjugated directly onto AGuIX NPs (i.e., AGuIX Ln@RB), and the use of a spacer arm (i.e., AGuIX Ln@spacer arm-RB) increased FRET efficiency. Singlet oxygen production by these NPs was observed under UV–visible illumination and X-ray irradiation. The in vitro bioassay demonstrated 52% cell death of U-251MG derived from human malignant glioblastoma multiforme at a concentration of 1 μM RB after illumination and irradiation (2 Gy, 320 kV, 10 mA, 3 Gy/min at 47 cm). In addition, the RB-coupled NRP-1-targeting peptide (i.e., K(RB)DKPPR) was conjugated onto AGuIX NPs by a thiol-maleimide click chemistry reaction, and an affinity in the nM range was observed. Full article

von Willebrand factor (vWF) is a large glycoprotein in the circulation system, which senses hydrodynamic force at vascular injuries and then recruits platelets in assembling clots. How vWF mechanosenses shear flow for molecular unfolding is an important topic. Here, a Förster resonance energy transfer (FRET) biosensor was developed to monitor vWF conformation change to hydrodynamic force. The vWF-based biosensor is anchored on the cell surface, in which the A2 domain is flanked with a FRET pair. With 293T cells seeded into microfluidic channels, 2.8 dyn/cm² of shear force (i.e., 28 μN/cm², or 264.1/s in shear rate) induced a remarkable FRET change (~60%) in 30 min. A gradient micro-shear below 2.8 dyn/cm² demonstrated FRET responses positively related to flow magnitudes, with 0.14 dyn/cm² (1.4 μN/cm²) inducing an obvious change (~16%). The FRET increases indicate closer positioning of A2’s two terminals in vWF or the addition of a more parallel orientation of the FRET pair, supported with the high FRET of the A2-only-based biosensor, which probably resulted from flow-induced A2 dissociation from vWF intramolecular binding such as that in A1/A3 domains. Interestingly, gradient flow increases from 2.8 to 28 dyn/cm² led to decreasing FRET changes, suggesting the second-level unfolding in the A2 domain. The LOCK-vWF biosensor with bridged A2 two terminals or an A2-only biosensor could not sense the shear, indicating a structure-flexible A2 and large vWF molecules that are important in the mechanosensation. In conclusion, the developed vWF-based biosensor demonstrated the high mechanosensation of vWF with two-level unfolding to shear force: the dissociation of the A2 domain from vWF intramolecular binding under a micro-shear, and then the unfolding of A2 in vWF under a higher shear; the FRET response to shear force at a very low scale may support the observed clot formation at microvascular wounds. This study provides new insights into the vWF’s mechanosensitive feature for its physiological functions and implicated disorders. Full article

Reconstituted high-density lipoprotein nanoparticles (NPs), which mimic the structure and function of endogenous human plasma HDL, hold promise as a robust drug delivery system. These nanoparticles, when loaded with appropriate agents, serve as powerful tools for targeted drug delivery. The fundamental challenge lies in controlling and estimating the actual drug load and the efficiency of drug release at the target. In this report, we present a novel approach based on enhanced Förster Resonance Energy Transfer (FRET) to assess particle load and monitor payload release. The NPs are labeled with donor molecules embedded in the lipid phase, while the spherical core volume is filled with acceptor molecules. Highly enhanced FRET efficiency to multiple acceptors in the NP core has been observed at distances significantly larger than the characteristic Förster distance (R₀). To confirm that the observed changes in donor and acceptor emissions are a result of FRET, we developed a theoretical model for nonradiative energy transfer from a single donor to multiple acceptors enclosed in a spherical core volume. The load-dependent shortening of the fluorescence lifetime of the donor correlated with the presence of a negative component in the intensity decay of the acceptor clearly demonstrates that FRET can occur at a large distance comparable to the nanoparticle size (over 100 Å). Comparison of theoretical simulations with the measured intensity decays of the donor and acceptor fluorophores constitute a new method for evaluating particle load. The observed FRET efficiency depends on the number of acceptors in the core, providing a simple way to estimate the nanoparticle load efficiency. Particle disintegration and load release result in a distinct change in donor and acceptor emissions. This approach constitutes a novel strategy for assessing NP core load, monitoring NP integrity, and evaluating payload release efficiency to target cells. Significants: In the last decade, nanoparticles have emerged as a promising strategy for targeted drug delivery, with applications ranging from cancer therapy to ocular neurodegenerative disease treatments. Despite their potential, a significant issue has been the real-time monitoring of these drug delivery vehicles within biological systems. Effective strategies for monitoring NP payload loading, NP integrity, and payload release are needed to assess the quality of new drug delivery systems. In our study, we have found that FRET-enabled NPs function as an improved method for monitoring these aspects currently missing from current drug delivery efforts. Full article

We established a real-time Förster resonance energy transfer (FRET) based assay to evaluate targeted drug delivery using polymeric micelles. Red fluorescent protein (RFP)-expressing E. coli cells were used as a test system to monitor the delivery of drug-fluorophore such as curcumin and umbelliferones (MUmb and AMC) encapsulated in the polymeric micellar formulations. The efficiency of the drug delivery was quantified using the FRET efficiency, measured as the degree of energy transfer from the drug to the RFP. FRET efficiency directly provides the determination of the delivery efficacy, offering a versatile platform adaptable to various drugs and cell types. We used polymer micelles as a carrier for targeted delivery of fluorescent drugs to bacterial cells expressing RFP. The physicochemical characterization of the interaction between the drugs and the micelles including spectral properties, and the solubility and binding constants, were determined. We revealed a stronger affinity of MUmb for heparin-based micelles (K_d~10⁻⁵ M) compared to chitosan-based micelles (K_d~10⁻⁴ M), underscoring the influence of polymer composition on drug loading efficiency. For micelles containing MUmb, a FRET efficiency significantly exceeds (by three times) the efficiency for non-micellar MUmb, which have minimal penetration into bacterial cells. The most noticeable effect was observed with the use of the micellar curcumin providing pronounced activation of the RPF fluorescence signal, due to the interaction with curcumins (fluorophore-donor). Curcumin delivery using Chit5-OA micelle resulted in a 115% increase in RFP fluorescence intensity, and Hep-LA showed a significant seven-fold increase. These results highlight the significant effect of micellar composition on the effectiveness of drug delivery. In addition, we have developed a visual platform designed to evaluate the effectiveness of a pharmaceutical product through the visualization of the fluorescence of a bacterial culture on a Petri dish. This method allows us to quickly and accurately assess the penetration of a drug into bacteria, or those located inside other cells, such as macrophages, where the intercellular latent forms of the infection are located. Micellar formulations show enhanced antibacterial activity compared to free drugs, and formulations with Hep-OA micelles demonstrate the most significant reduction in E. coli viability. Synergistic effects were observed when combining curcumin and MUmb with moxifloxacin, resulting in a remarkable 40–50% increase in efficacy. The presented approach, based on the FRET test system with RFP expressed in the bacterial cells, establishes a powerful platform for development and optimizing targeted drug delivery systems. Full article