
Coatings | Highly Cited Papers in 2025 in the “High-Energy Beam Surface Engineering and Coatings” Section
The “High-Energy Beam Surface Engineering and Coatings” Section of Coatings (ISSN 2079-6412) is dedicated to fundamental and applied research advancing the understanding of laser-, electron-beam-, and ion-beam-processed surfaces, coatings, thin films, and interfaces. It covers beam–material interaction mechanisms, deposition and modification processes, microstructural and interfacial evolution, defect and residual-stress formation, and performance metrics toward practical engineering solutions, welcoming cross-disciplinary contributions from materials science, physics, chemistry, and engineering that offer solid insights into process optimization, multi-scale characterization, and functional property tailoring for targeted applications.
As all of the articles published in our journal are of an open access format, you have free and unlimited access to the full texts. We invite you to read our most highly cited papers published in 2025, which are listed below:
1. “Modern Innovations and Applications in Plasma Electrolytic Oxidation Coatings on Aluminum, Magnesium, and Titanium”
by Angus G. McCarroll and Pradeep L. Menezes
Coatings 2025, 15(5), 592; https://doi.org/10.3390/coatings15050592
2. “Metal Matrix Composite Coatings Deposited by Laser Cladding: On the Effectiveness of WC Reinforcement for Wear Resistance and Its Synergy with the Matrix Material (Ni Versus Co Alloys)”
by Leandro João da Silva, Jeferson Trevizan Pacheco, Edja Iandeyara Freitas Moura, Douglas Bezerra de Araújo, Ruham Pablo Reis and Ana Sofia Clímaco Monteiro D’Oliveira
Coatings 2025, 15(4), 468; https://doi.org/10.3390/coatings15040468
3. “Enhancing the Surface Integrity of a Laser Powder Bed Fusion Inconel 718 Alloy by Tailoring the Microstructure and Microrelief Using Various Finishing Methods”
by Dmytro Lesyk, Bohdan Mordyuk, Silvia Martinez, Vitaliy Dzhemelinskyi, Daniel Grochala, Andriy Kotko and Aitzol Lamikiz
Coatings 2025, 15(4), 425; https://doi.org/10.3390/coatings15040425
4. “A Comprehensive Review of Improving the Durability Properties of Agricultural Harrow Discs by Atmospheric Plasma Spraying (APS)”
by Corneliu Munteanu, Iurie Melnic, Bogdan Istrate, Mark Hardiman, Lidia Gaiginschi, Fabian Cezar Lupu, Vlad Nicolae Arsenoaia, Daniela Lucia Chicet, Constantin Zirnescu and Vladimir Badiul
Coatings 2025, 15(6), 632; https://doi.org/10.3390/coatings15060632
5. “Morphology and Wear Resistance of Laser-Clad Fe-Cr-Nb-C Alloy Coatings”
by Min Chen, Haoran Zhou, Xuyang Liu, Zhongxue Feng, Xuan Xiao, Liu Weng, Yang Yang and Yan Jiang
Coatings 2025, 15(9), 1055; https://doi.org/10.3390/coatings15091055
6. “Effect of Annealing Temperature on Residual Stress and Microstructure of Ni60A Laser Cladding Repaired Gear”
by Xin Zhao, Wenlei Sun, Jingqi Huang, Yuzhu Wu, Yuer Lu and Shuai Wang
Coatings 2025, 15(2), 212; https://doi.org/10.3390/coatings15020212
7. “An Investigation of Carbon-Fiber-Reinforced Plastic Ablation by Femtosecond Laser Pulses for Further Material Cutting”
by Paulius Šlevas, Justinas Minkevičius, Orestas Ulčinas, Sergej Orlov, Egidijus Vanagas, Anna Bilousova, Denys Baklan and Oleksiy Myronyuk
Coatings 2025, 15(1), 104; https://doi.org/10.3390/coatings15010104
8. “Influence of Laser Remelting on Creep Resistance in Ti-6Al-4V Alloy with Thermal Barrier Coating”
by Filipe Estevão de Freitas, Roberta Aguiar Luna da Silva, Renata Jesuina Takahashi, Adriano Gonçalves dos Reis, Aline Gonçalves Capella and Danieli Aparecida Pereira Reis
Coatings 2025, 15(2), 220; https://doi.org/10.3390/coatings15020220
9. “Enhanced Mechanical Durability of Polymeric Nanowires via Carbyne-Enriched Plasma Coatings for Bactericidal Action”
by Dimitrios Nioras, Dionysia Kefallinou, Dimosthenis Ioannou, Luis Antonio Panes-Ruiz, Bergoi Ibarlucea, Gianaurelio Cuniberti, Tianshu Lan, Angeliki Tserepi and Evangelos Gogolides
Coatings 2025, 15(11), 1247; https://doi.org/10.3390/coatings15111247
http://www.mdpi.com/2079-6412/15/11/1247
10. “Plasma Electrolytic Oxidation Coatings: Tribological Properties, Engineering Applications, and Future Innovations”
by Lincoln Pinoski and Pradeep L. Menezes
Coatings 2026, 16(7), 778; https://doi.org/10.3390/coatings16070778