Reviewer Board
Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
National University of Science and Technology "MISiS", 119991, Russian Federation, Moscow, Leninski av. 4
Interests: machine learning; modelling; fracture; steel; metallic glasses; artificial neural networks; additive manufacturing; microstructure; finite element modeling; selective laser melting; aluminum alloys; hot deformation
Interests: machine learning; modelling; fracture; steel; metallic glasses; artificial neural networks; additive manufacturing; microstructure; finite element modeling; selective laser melting; aluminum alloys; hot deformation
Department of Biomedical and Surgical and Biomedical Sciences, Catania University, Catania, Italy
Interests: materials science
Interests: materials science
Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iaşi, Iaşi, Romania
Interests: biodegradable; coroziunea materialelor metalice -obținerea straturi subțiri prin pld; electrochemical impedance spectroscopy (eis); scanning electron microscopy (sem); X-ray diffraction (xrd)
Interests: biodegradable; coroziunea materialelor metalice -obținerea straturi subțiri prin pld; electrochemical impedance spectroscopy (eis); scanning electron microscopy (sem); X-ray diffraction (xrd)
Department of Structural, Geotechnical and Building Engineering (DISEG), Politecnico di Torino,
Corso Duca degli Abruzzi, 24, 10129 Turin (Italy)
Interests: structural health monitoring; structural dynamics; additive manufacturing; mechanical testing; damage detection; stereolithography; glass fibre reinforced polymer
Interests: structural health monitoring; structural dynamics; additive manufacturing; mechanical testing; damage detection; stereolithography; glass fibre reinforced polymer
Department of Chemistry, Università degli Studi di Pavia, Via Taramelli 12, 27100 Pavia, Italy
Interests: powder diffraction; pair distribution function; disorder, ionic conductors; ceria; perovskites; synchrotron radiation
Interests: powder diffraction; pair distribution function; disorder, ionic conductors; ceria; perovskites; synchrotron radiation
Department of Engineering and Applied Sciences, University of Bergamo, 24129 Bergamo, Italy
Interests: geopolymers; concrete; cementitious materials; durability of concrete; alkali activated materials; sustainability of concrete
Interests: geopolymers; concrete; cementitious materials; durability of concrete; alkali activated materials; sustainability of concrete
Politecnico di Milano, Department of Mechanical Engineering, Via La Masa 1, I-20154 Milan, Italy
Interests: internal damping modeling; creep and creep fatigue crack growth; machine design
Interests: internal damping modeling; creep and creep fatigue crack growth; machine design
Department of Applied Science and Technology (DISAT), Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy
Interests: alkali-activated materials; geopolymers; cementitious materials; sustainability; waste recycling; recycled aggregates; polymer nanocomposites; 3D printing; ceramics and composites; digital light processing
Interests: alkali-activated materials; geopolymers; cementitious materials; sustainability; waste recycling; recycled aggregates; polymer nanocomposites; 3D printing; ceramics and composites; digital light processing
Department of Materials, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 1,10000 Zagreb, Croatia
Interests: shape memory alloys; smart materials; surface coatings; mechanical properties of materials; powder metallurgy; titanium alloys; cemented carbides
Interests: shape memory alloys; smart materials; surface coatings; mechanical properties of materials; powder metallurgy; titanium alloys; cemented carbides
Department of Physics and Meteorology, School of Sciences, Universidade Estadual Paulista (UNESP), Bauru 01049-010, Brazil
Interests: niomaterials; Ti alloys; surface modification; microstructure; mechanical properties; corrosion, wear; plasma treatment
Interests: niomaterials; Ti alloys; surface modification; microstructure; mechanical properties; corrosion, wear; plasma treatment
Department of Dental Techniques, Faculty of Midwifery and Medical Assisting (FMAM), “Carol Davila” University of Medicine and Pharmacy, 8 Eroilor Sanitari Blvd, 050474 Bucharest, Romania
Interests: biomaterials; polymers for dental applications; cad/cam; additive technology; nanomaterials; bioprinting
Interests: biomaterials; polymers for dental applications; cad/cam; additive technology; nanomaterials; bioprinting
The Instytut Techniki Budowlanej (ITB), Warsaw, Poland
Interests: nanocomposites; construction; concrete; building materials; polymer concrete; concrete repairs; construction sustainability; construction durability; building materials engineering; building materials performance
Interests: nanocomposites; construction; concrete; building materials; polymer concrete; concrete repairs; construction sustainability; construction durability; building materials engineering; building materials performance
The Faculty of Civil Engineering, Wroclaw Unversity of Science and Technology, 50-370 Warsaw, Poland
Interests: cementitous materials; neural networks; concrete skin; surface morphology metrology; civil engineering
Interests: cementitous materials; neural networks; concrete skin; surface morphology metrology; civil engineering
Department of Strength of Materials, Lodz University of Technology, Lodz, Poland
Interests: composite structures; functionally graded materials; finite element method; thin-walled structures stability; strength study
Interests: composite structures; functionally graded materials; finite element method; thin-walled structures stability; strength study
Prof. Dr. Tomasz Czujko
Institute of Materials Science and Engineering, Military University of Technology, Kaliskiego 2, 00-908 Warsaw, Poland
Interests: advanced structural materials manufactured by unconventional techniques (mechanical alloying, LENS); materials for hydrogen storage obtained by mechanical alloying; superconducting materials fabricated by mechanical alloying and LENS technique; quantitative characterization of microstructure in polycrystalline and nanocrystalline materials; relationship between structure and structural and functional properties of metals and alloys; thermodynamical characterization of manufacturing processes; materials in engineering design (environmental degradation and materials selection)
Interests: advanced structural materials manufactured by unconventional techniques (mechanical alloying, LENS); materials for hydrogen storage obtained by mechanical alloying; superconducting materials fabricated by mechanical alloying and LENS technique; quantitative characterization of microstructure in polycrystalline and nanocrystalline materials; relationship between structure and structural and functional properties of metals and alloys; thermodynamical characterization of manufacturing processes; materials in engineering design (environmental degradation and materials selection)
Dipartimento di Ingegneria Civile Edile e Ambientale (DICEA), Sapienza University of Rome, Via Eudossiana 18, 00100 Rome, Italy
Interests: infrastructures; materials; road materials; recycling; vibrations; embankments
Interests: infrastructures; materials; road materials; recycling; vibrations; embankments
Department of Mechanical Engineering, ISEP–School of Engineering, Polytechnic of Porto, 4200-072 Porto, Portugal
Interests: coatings; materials; metals; materials characterization; wear; microscopy; welding; machining; manufacturing processes; composites; industrial management
Interests: coatings; materials; metals; materials characterization; wear; microscopy; welding; machining; manufacturing processes; composites; industrial management
Instituto Superior de Engenharia de Lisboa, Lisbon, Portugal
Interests: self-compacting concrete; concrete microstructure and durability; sustainable construction (recycled aggregates in concrete and mortars) and construction technology
Interests: self-compacting concrete; concrete microstructure and durability; sustainable construction (recycled aggregates in concrete and mortars) and construction technology
School of Dentistry, Department of Medical and Surgical Specialties, Radiological Sciences, and Public Health, University of Brescia, Piazzale Spedali Civili 1, 25123 Brescia, Italy
Interests: biomaterials; ceramics; adhesion; dental implants; prosthodontics; orthodontics; CBCT; esthetics; CAD-CAM technology; intra oral scanners
Interests: biomaterials; ceramics; adhesion; dental implants; prosthodontics; orthodontics; CBCT; esthetics; CAD-CAM technology; intra oral scanners
Instituto de Bioingeniería, Universidad Miguel Hernández, Elche, Spain
Interests: biomaterials; tissue engineering; bone tissue regeneration; desing and processing bioceramics; phase equilibrium diagrams; 3D-scaffolds; regenerative materials
Interests: biomaterials; tissue engineering; bone tissue regeneration; desing and processing bioceramics; phase equilibrium diagrams; 3D-scaffolds; regenerative materials
Department of Engineering, University of Messina, 98166 Messina, Italy
Interests: mechanics of materials; concrete structures; reinforced concrete; lightweight concretes; fiber-reinforced composites (FRP-FRCM)
Interests: mechanics of materials; concrete structures; reinforced concrete; lightweight concretes; fiber-reinforced composites (FRP-FRCM)
São Carlos Institute of Physics, University of São Paulo, P.O. Box 369, São Carlos 13560-970, SP, Brazil
Interests: nuclear magnetic resonance; fynamic nuclear polarization; electron paramagnetic resonance
Interests: nuclear magnetic resonance; fynamic nuclear polarization; electron paramagnetic resonance
Faculty of Civil and Environmental Engineering and Architecture, Rzeszow University of Technology, Poznańska 2, 35-084 Rzeszow, Poland
Interests: building materials; composites; resin composites; polymer mortars; waste materials; design of experiments
Interests: building materials; composites; resin composites; polymer mortars; waste materials; design of experiments
Department of Highway and Environmental Engineering, Faculty of Civil Engineering, University of Žilina, Stavebná fakulta Žilinskej univerzity v Žiline, Univerzitná 8215/1, 010 26 Žilina, Slovakia
Interests: Innovative; climatic adaptive materials in road construction; especially pavements
Interests: Innovative; climatic adaptive materials in road construction; especially pavements
Department of Manufacturing and Production Engineering, Gdańsk University of Technology, Gdansk, Poland
Interests: grinding; abrasive machining; ceramic materials; computer aided process planning
Interests: grinding; abrasive machining; ceramic materials; computer aided process planning
Dipartimento di Scienze della Terra, Università degli Studi di Torino, Via Valperga Caluso 35, 10125 Torino, Italy
Interests: waste-to-energy and treatments on incineration products; management and treatment of municipal solid waste; end-for-waste and the reuse of materials with a view to a circular economy; wastewater treatment techniques with innovative; low energy consumption processes
Interests: waste-to-energy and treatments on incineration products; management and treatment of municipal solid waste; end-for-waste and the reuse of materials with a view to a circular economy; wastewater treatment techniques with innovative; low energy consumption processes
Faculty of Mechanical Engineering, Indonesia Defense University, IPSC Area, Sentul, Bogor, West Java 16810, Indonesia
Interests: mechanical properties; fatigue; metals; material characterization; mechanical testing
Interests: mechanical properties; fatigue; metals; material characterization; mechanical testing
School of Dentistry, Department of Neurosciences, Section of Prosthodontics and Digital Dentistry, University of Padova, 35122 Padova, PD, Italy
Interests: dental materials; digital dentistry; prosthodontics; CAD-CAM technology; intraoral scanner; additive manufacturing; subtractive manufacturing; implant-supported fixed dental prosthesis
Interests: dental materials; digital dentistry; prosthodontics; CAD-CAM technology; intraoral scanner; additive manufacturing; subtractive manufacturing; implant-supported fixed dental prosthesis
Structural Integrity Group, University of Burgos, Burgos, Spain
Interests: structural integrity; fracture; fatigue; Hydrogen Embrittlement; hydrogen diffusion; plasticity; residual stress; additive manufacturing; material characterisation; small punch test; finite element method; machine learning; damage modelling; Multiscale modelling
Interests: structural integrity; fracture; fatigue; Hydrogen Embrittlement; hydrogen diffusion; plasticity; residual stress; additive manufacturing; material characterisation; small punch test; finite element method; machine learning; damage modelling; Multiscale modelling
National Institute for Laser, Plasma and Radiation Physics, Bucharest, Romania
Interests: biomaterials; biointerfaces; micro and nano topographies; surface functionalization; implants
Interests: biomaterials; biointerfaces; micro and nano topographies; surface functionalization; implants
