Editorial Board for section 'Green Materials'
- Biomaterials Section
- Energy Materials Section
- Advanced Composites Section
- Advanced Materials Characterization Section
- Porous Materials Section
- Manufacturing Processes and Systems Section
- Advanced Nanomaterials and Nanotechnology Section
- Smart Materials Section
- Thin Films and Interfaces Section
- Catalytic Materials Section
- Carbon Materials Section
- Materials Chemistry Section
- Materials Physics Section
- Optical and Photonic Materials Section
- Corrosion Section
- Construction and Building Materials Section
- Materials Simulation and Design Section
- Electronic Materials Section
- Advanced and Functional Ceramics and Glasses Section
- Metals and Alloys Section
- Soft Matter Section
- Polymeric Materials Section
- Quantum Materials Section
- Mechanics of Materials Section
- Green Materials Section
Please see the section webpage for more information on this section.
Please note that the order in which the Editors appear on this page is alphabetical, and follows the structure of the editorial board presented on the MDPI website under information for editors: editorial board responsibilities.
Members
INCDO-INOE 2000, Research Institute for Analytical Instrumentation, 400293 Cluj-Napoca, Romania
Interests: nanomaterials; nanocomposites; characterization; structure–property relationships
Special Issues, Collections and Topics in MDPI journals
Interests: nanomaterials; nanocomposites; characterization; structure–property relationships
Special Issues, Collections and Topics in MDPI journals
Faculty of Chemical Engineering and Environmental Protection, “Gheorghe Asachi” Technical University of Iasi, 73, Blvd. D. Mangeron, 700050 Iasi, Romania
Interests: Circular Economy; recovery and recycling of valuable components from wastes; remediation of environmental components (water, air and soil); low-cost materials (sorbents, catalysts, insulators, building bricks, cements, etc.)
Special Issues, Collections and Topics in MDPI journals
Interests: Circular Economy; recovery and recycling of valuable components from wastes; remediation of environmental components (water, air and soil); low-cost materials (sorbents, catalysts, insulators, building bricks, cements, etc.)
Special Issues, Collections and Topics in MDPI journals
Department of Innovation Engineering, University of Salento, Via per Monteroni, 73100 Lecce, Italy
Interests: coatings; nanomaterials; 3D printing; circular economy; polymers; nanocomposites
Special Issues, Collections and Topics in MDPI journals
Interests: coatings; nanomaterials; 3D printing; circular economy; polymers; nanocomposites
Special Issues, Collections and Topics in MDPI journals
Department of Chemistry & CICECO, Universidade de Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal
Interests: chemistry and technology of lignocellulosics; lignin chemistry; lignin-based polymers and composites; hybrid materials; catalysis; paper materials; analytic tools for natural polymers
Special Issues, Collections and Topics in MDPI journals
Interests: chemistry and technology of lignocellulosics; lignin chemistry; lignin-based polymers and composites; hybrid materials; catalysis; paper materials; analytic tools for natural polymers
Special Issues, Collections and Topics in MDPI journals
1. Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou 450001, China
2. Key Laboratory of Critical Metals Minerals Supernormal Enrichment and Extraction of Ministry of Education, Zhengzhou University, Zhengzhou 450001, China
Interests: critical metal recovery from low-grade ores; heavy metal pollution control
Special Issues, Collections and Topics in MDPI journals
2. Key Laboratory of Critical Metals Minerals Supernormal Enrichment and Extraction of Ministry of Education, Zhengzhou University, Zhengzhou 450001, China
Interests: critical metal recovery from low-grade ores; heavy metal pollution control
Special Issues, Collections and Topics in MDPI journals
Department of Chemistry, Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West, Waterloo, ON N2L 3G1, Canada
Interests: inorganic nanomaterials; solid state chemistry; thermoelectric energy
Interests: inorganic nanomaterials; solid state chemistry; thermoelectric energy
Centre of Polymer and Carbon Materials, Polish Academy of Sciences, 34 M. Curie-Sklodowska, 41-800 Zabrze, Poland
Interests: biodegradable and functional polymers; novel initiators and mechanisms of anionic polymerization; the synthesis of biodegradable polymers possessing desired architecture; biodegradation of synthetic and natural polymers as well as novel mass spectrometry techniques for analysis of biodegradable polymers at the molecular level; structural studies of copolymers; composites and blends of controlled biodegradability containing synthetic analogues of natural polyhydroxy- alkanoates; copolymerisation reactions to novel polymeric materials with “made-to-order” structure and properties with variety of catalysts (including metal free anionic initiators); forensic engineering of advanced polymeric materials
Interests: biodegradable and functional polymers; novel initiators and mechanisms of anionic polymerization; the synthesis of biodegradable polymers possessing desired architecture; biodegradation of synthetic and natural polymers as well as novel mass spectrometry techniques for analysis of biodegradable polymers at the molecular level; structural studies of copolymers; composites and blends of controlled biodegradability containing synthetic analogues of natural polyhydroxy- alkanoates; copolymerisation reactions to novel polymeric materials with “made-to-order” structure and properties with variety of catalysts (including metal free anionic initiators); forensic engineering of advanced polymeric materials
School of Engineering, RMIT University, Melbourne, VIC 3000, Australia
Interests: green/sustainable building construction; recycling and reuse of waste materials; soil Stabilisation; ground improvement; pavement; expansive soil; soil-structure Interaction
Interests: green/sustainable building construction; recycling and reuse of waste materials; soil Stabilisation; ground improvement; pavement; expansive soil; soil-structure Interaction
Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), Singapore 138634, Singapore
Interests: materials sustainability; circular polymer; therapeutic delivery
Interests: materials sustainability; circular polymer; therapeutic delivery
School of Light Industry and Engineering, South China University of Technology, Guangzhou 510640, China
Interests: cellulose; wood; biocomposites; sustainable materials from biomass; moisture energy
Interests: cellulose; wood; biocomposites; sustainable materials from biomass; moisture energy
School of Physics and Astronomy, University of Leeds, Leeds LS2 9JT, UK
Interests: cellulose; ionic liquids; films; fibres; composites; carbohydrate polymers
Interests: cellulose; ionic liquids; films; fibres; composites; carbohydrate polymers
Mechanical Engineering Department, University of North Texas, Denton, TX 76203, USA
Interests: bioproducts; natural fiber composites; functional composites; biomass to carbon conversion; bio-based carbon for electrode
Special Issues, Collections and Topics in MDPI journals
Interests: bioproducts; natural fiber composites; functional composites; biomass to carbon conversion; bio-based carbon for electrode
Special Issues, Collections and Topics in MDPI journals
Food Engineering Research Institute (FoodUPV), Universitat Politècnica de València (UPV), Camino de Vera s/n, 46022 Valencia, Spain
Interests: bio-based and biodegradable polymers; green composites; polymerization of biopolymers; processing of bioplastics; nanofibers obtained by electrospinning; sustainable polymer technologies for food preservation; controlled release of active compounds in plastic formulations; biopolymers for food packaging; bioeconomy; circular economy
Special Issues, Collections and Topics in MDPI journals
Interests: bio-based and biodegradable polymers; green composites; polymerization of biopolymers; processing of bioplastics; nanofibers obtained by electrospinning; sustainable polymer technologies for food preservation; controlled release of active compounds in plastic formulations; biopolymers for food packaging; bioeconomy; circular economy
Special Issues, Collections and Topics in MDPI journals
Department of Engineering and Technology of Chemical Processes, Faculty of Chemistry, Wroclaw University of Science and Technology, Wrocław, Poland
Interests: biopolymers; smart packaging; active packaging; hydrogels; electrospinning; encapsulation; material recovery; waste valorization; controlled-release systems; sorption; wastewater treatment; environmental sustainability; fertilizers
Special Issues, Collections and Topics in MDPI journals
Interests: biopolymers; smart packaging; active packaging; hydrogels; electrospinning; encapsulation; material recovery; waste valorization; controlled-release systems; sorption; wastewater treatment; environmental sustainability; fertilizers
Special Issues, Collections and Topics in MDPI journals
