Editorial Board
- Biomaterials Section
- Energy Materials Section
- Advanced Composites Section
- Advanced Materials Characterization Section
- Porous Materials Section
- Manufacturing Processes and Systems Section
- Advanced Nanomaterials and Nanotechnology Section
- Smart Materials Section
- Thin Films and Interfaces Section
- Catalytic Materials Section
- Carbon Materials Section
- Materials Chemistry Section
- Materials Physics Section
- Optical and Photonic Materials Section
- Corrosion Section
- Construction and Building Materials Section
- Materials Simulation and Design Section
- Electronic Materials Section
- Advanced and Functional Ceramics and Glasses Section
- Metals and Alloys Section
- Soft Matter Section
- Polymeric Materials Section
- Quantum Materials Section
- Mechanics of Materials Section
- Green Materials Section
Please note that the order in which the Editors appear on this page is alphabetical, and follows the structure of the editorial board presented on the MDPI website under information for editors: editorial board responsibilities.
Members
CNRS Research Professor Emeritus of Solid State Chemistry, Sorbonne Université, MONARIS (Laboratory “From MOlecule to NAnoobject: Reactivity, Interactions and Spectroscopies”), C49, 4 Place Jussieu, 75005 Paris, France
Interests: synthesis (single crystal, ceramic, glass, composites, sol-gel); structure and short range order; ion dynamics; proton dynamics; ionic conductivity; proton conductivity; vibrational spectroscopy (IR absorption/reflection, Raman microspectroscopy, QNS/INS neutron scattering); frequency dependent conductivity (Hz to THz); mechanical properties (stress, strain, fatigue); Cultural Heritage (on-site non-invasive study)
Interests: synthesis (single crystal, ceramic, glass, composites, sol-gel); structure and short range order; ion dynamics; proton dynamics; ionic conductivity; proton conductivity; vibrational spectroscopy (IR absorption/reflection, Raman microspectroscopy, QNS/INS neutron scattering); frequency dependent conductivity (Hz to THz); mechanical properties (stress, strain, fatigue); Cultural Heritage (on-site non-invasive study)
Department of Operative Dentistry, University of Pavia, Pavia, Italy
Interests: dentistry; conservative; endodontics; prosthesis
Interests: dentistry; conservative; endodontics; prosthesis
Department of Engineering and Applied Sciences, University of Bergamo, Viale Marconi, 4, 24044 Dalmine, BG, Italy
Interests: durability and sustainability of cementitious materials; admixtures and additives for concrete; alternative binders and aggregates; cement-based repair materials
Special Issues, Collections and Topics in MDPI journals
Interests: durability and sustainability of cementitious materials; admixtures and additives for concrete; alternative binders and aggregates; cement-based repair materials
Special Issues, Collections and Topics in MDPI journals
Department of Physics and Geology, University of Perugia, Perugia, Italy
Interests: dynamics of disordered materials (liquids, glasses, polymers); supercooled liquids and glasses; chemical and physical vitrification; gelation; microgels; thermoresponsive polymers; aggregation kinetics of soft materials; hydration properties of biomolecules; molecular dynamics simulation
Special Issues, Collections and Topics in MDPI journals
Interests: dynamics of disordered materials (liquids, glasses, polymers); supercooled liquids and glasses; chemical and physical vitrification; gelation; microgels; thermoresponsive polymers; aggregation kinetics of soft materials; hydration properties of biomolecules; molecular dynamics simulation
Special Issues, Collections and Topics in MDPI journals
Institut Matériaux Microélectronique Nanosciences de Provence (IM2NP), CNRS UMR 7334, Aix-Marseille Université, Université de Toulon, Avenue Escadrille Normandie Niemen, 13397 Marseille, CEDEX 20, France
Interests: materials science; nanotechnology; synchrotron X-ray diffraction (coherent X-ray diffraction, laue microdiffraction); in situ nanomechanical testing; finite size effects; nanowires
Special Issues, Collections and Topics in MDPI journals
Interests: materials science; nanotechnology; synchrotron X-ray diffraction (coherent X-ray diffraction, laue microdiffraction); in situ nanomechanical testing; finite size effects; nanowires
Special Issues, Collections and Topics in MDPI journals
Physics Center of Minho and Porto Universities (CF-UM-UP), University of Minho, Campus de Gualtar, 4710-057 Braga, Portugal
Interests: magnetic nanoparticles; semiconductor nanoparticles; metallic nanoparticles; quantum dots; biosensors; magnetic liposomes; new fluorescent probes; bionanoconjugates; drug delivery; solar cells
Special Issues, Collections and Topics in MDPI journals
Interests: magnetic nanoparticles; semiconductor nanoparticles; metallic nanoparticles; quantum dots; biosensors; magnetic liposomes; new fluorescent probes; bionanoconjugates; drug delivery; solar cells
Special Issues, Collections and Topics in MDPI journals
1. Dipartimento di Matematica e Fisica "E. De Giorgi", University of Salento, Lecce, Italy
2. CNR NANOTEC-Istitute of Nanotechnology, Lecce, Italy
Interests: inorganic nanomaterials; synthesis and characterization of colloidal nanocrystals; nanocrystal applications in optoelectronics; catalysis; energy conversion/storage and biomedicine
2. CNR NANOTEC-Istitute of Nanotechnology, Lecce, Italy
Interests: inorganic nanomaterials; synthesis and characterization of colloidal nanocrystals; nanocrystal applications in optoelectronics; catalysis; energy conversion/storage and biomedicine
Faculty of Chemical Engineering and Environmental Protection, “Gheorghe Asachi” Technical University of Iasi, 73, Blvd. D. Mangeron, 700050 Iasi, Romania
Interests: Circular Economy; recovery and recycling of valuable components from wastes; remediation of environmental components (water, air and soil); low-cost materials (sorbents, catalysts, insulators, building bricks, cements, etc.)
Special Issues, Collections and Topics in MDPI journals
Interests: Circular Economy; recovery and recycling of valuable components from wastes; remediation of environmental components (water, air and soil); low-cost materials (sorbents, catalysts, insulators, building bricks, cements, etc.)
Special Issues, Collections and Topics in MDPI journals
« Petru Poni » Institute of Macromolecular Chemistry, Aleea Grigore Ghica Voda 41A, 700487 Iasi, Romania
Interests: structure-property correlation in (bio)polymers; thermomechanical characterization of polymers and polymeric materials; rheology of polymers
Special Issues, Collections and Topics in MDPI journals
Interests: structure-property correlation in (bio)polymers; thermomechanical characterization of polymers and polymeric materials; rheology of polymers
Special Issues, Collections and Topics in MDPI journals
Consiglio Nazionale Delle Ricerche - Istituto per lo Studio dei Materiali Nanostrutturati (CNR-ISMN), Via P. Gobetti 101, 40129 Bologna, Italy
Interests: scanning probe microscopies; organic materials; thin films; molecular growth phenomena; nanofabrication
Interests: scanning probe microscopies; organic materials; thin films; molecular growth phenomena; nanofabrication
Institut de Ciència de Materials de Barcelona (ICMAB-CSIC), Campus UAB, 08193 Bellaterra, Spain
Interests: synthesis of funtional organic materials; surface self-assembly; organic radicals; molecular electronics; electrochemical sensors and molecular junctions
Special Issues, Collections and Topics in MDPI journals
Interests: synthesis of funtional organic materials; surface self-assembly; organic radicals; molecular electronics; electrochemical sensors and molecular junctions
Special Issues, Collections and Topics in MDPI journals
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, China
Interests: forming simulation; crystal plasticity; additive manufacturing
Interests: forming simulation; crystal plasticity; additive manufacturing
Department of Materials, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lucica 1, HR-10000 Zagreb, Croatia
Interests: advanced ceramics; nanomaterials; corrosion mechanisms; wear mechanisms; mechanical characterization; sintering; microstructural characterization of ceramics; manufacturing; forming of ceramics
Special Issues, Collections and Topics in MDPI journals
Interests: advanced ceramics; nanomaterials; corrosion mechanisms; wear mechanisms; mechanical characterization; sintering; microstructural characterization of ceramics; manufacturing; forming of ceramics
Special Issues, Collections and Topics in MDPI journals
1. CNR-IPCF, National Research Council of Italy, Institute for Physical and Chemical Processes-Bari Division, Via Orabona 4, I-70126 Bari, Italy
2. Department of Chemistry, “A. Moro” University of Bari, Via Orabona 4, I-70126 Bari, Italy
Interests: colloidal nanoparticles and nanocrystals; functional nanomaterials; photocatalysis; nanomedicine
Special Issues, Collections and Topics in MDPI journals
2. Department of Chemistry, “A. Moro” University of Bari, Via Orabona 4, I-70126 Bari, Italy
Interests: colloidal nanoparticles and nanocrystals; functional nanomaterials; photocatalysis; nanomedicine
Special Issues, Collections and Topics in MDPI journals
Dipartimento di Scienze Chimiche e Geologiche, Università di Cagliari, 09124 Cagliari, Italy
Interests: synthesis and characterization of porous solids; heterogeneous catalysis; CO2 catalytic conversion; selective adsorption; renewable feedstocks; green chemistry
Interests: synthesis and characterization of porous solids; heterogeneous catalysis; CO2 catalytic conversion; selective adsorption; renewable feedstocks; green chemistry
Department of Chemistry, Northwestern University, Evanston, IL 60208, USA
Interests: chalcogenide materials; semiconductor materials, glasses, single crystals; crystal growth, crystal structure, correlated electron systems
Interests: chalcogenide materials; semiconductor materials, glasses, single crystals; crystal growth, crystal structure, correlated electron systems
Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, V. le J. F. Kennedy 54, Mostra d\'Oltremare, Pad. 20, 80125 Naples, Italy
Interests: biomaterial functionalization approaches; design and preparation of polymer and nanocomposite scaffolds for soft and hard tissue engineering applications using additive manufacturing techniques; and their physco-chemical; mechanical and morphological characterization
Special Issues, Collections and Topics in MDPI journals
Interests: biomaterial functionalization approaches; design and preparation of polymer and nanocomposite scaffolds for soft and hard tissue engineering applications using additive manufacturing techniques; and their physco-chemical; mechanical and morphological characterization
Special Issues, Collections and Topics in MDPI journals
Department of Mechanical Engineering, Faculty of Engineering of the University of Porto,
Rua Dr. Roberto Frias, s/n, 4200-465 Porto, Portugal
Interests: joining processes; materials design; engineering education
Special Issues, Collections and Topics in MDPI journals
Interests: joining processes; materials design; engineering education
Special Issues, Collections and Topics in MDPI journals
School of Chemical and Process Engineering, University of Leeds, Leeds LS2 9JT, UK
Interests: biomaterials; energy materials; polymers; composites; membranes; smart materials; interfacial technology; catalysts
Interests: biomaterials; energy materials; polymers; composites; membranes; smart materials; interfacial technology; catalysts
Department of Medical Biotechnology, Poznan University of Medical Sciences, Poznan, Poland and Greater Poland Cancer Centre, Poznan, Poland
Interests: silk; biomaterials; material functionalization; biomedical application of biotechnologically produced molecules; cancer treatment, cancer biology, 3D models of cancer
Special Issues, Collections and Topics in MDPI journals
Interests: silk; biomaterials; material functionalization; biomedical application of biotechnologically produced molecules; cancer treatment, cancer biology, 3D models of cancer
Special Issues, Collections and Topics in MDPI journals
Université Paris-Saclay, CentraleSupélec, CNRS, Laboratoire de Génie Electrique et Electronique de Paris, 91192 Gif-sur-Yvette, France
Interests: ferromagnetic materials; ferroelectric materials; smart materials; multiphysics; material modelling; micromechanics; multiscale methods; homogenisation; magnetostriction; magnetoelasticity
Interests: ferromagnetic materials; ferroelectric materials; smart materials; multiphysics; material modelling; micromechanics; multiscale methods; homogenisation; magnetostriction; magnetoelasticity
National Centre for Plasma Science and Technology, Dublin City University, Dublin, Ireland
Interests: plasma surface engineering; thin film deposition
Interests: plasma surface engineering; thin film deposition
Department of Physics, Chemistry, Biology, Linköping University, 581 83 Linköping, Sweden
Interests: group-III nitrides; THz and magneto-ellipsometry; 2D materials; Ultra-wide bandgap semiconductors
Interests: group-III nitrides; THz and magneto-ellipsometry; 2D materials; Ultra-wide bandgap semiconductors
School of Mechanical and Mining Engineering Faculty of Engineering, Architecture and Information Technology, The University of Queensland, Brisbane, Australia
Interests: advanced manufacturing and the design and development of medical devices
Interests: advanced manufacturing and the design and development of medical devices
National Center for Additive Manufacturing Excellence (NCAME), Mechanical Engineering Department, Auburn University, Auburn, AL 36849, USA
Interests: protective coatings; advanced thermal barrier coating systems; high pressure cold spray (HPCS); cold spray additive manufacturing (CSAM); hybrid additive manufacturing; thermal spray processes; high temprature oxidation; corrosion science; pitting and passivity; electrochemical impedance spectroscopy (EIS)
Special Issues, Collections and Topics in MDPI journals
Interests: protective coatings; advanced thermal barrier coating systems; high pressure cold spray (HPCS); cold spray additive manufacturing (CSAM); hybrid additive manufacturing; thermal spray processes; high temprature oxidation; corrosion science; pitting and passivity; electrochemical impedance spectroscopy (EIS)
Special Issues, Collections and Topics in MDPI journals
Faculty of Art, Science and Technology, Wrexham Glyndwr University, Wrexham, UK
Interests: microwave processing; structure and properties of materials; formulation of resins; the effect rapid heating has on the structure and properties of materials; epoxy resin/ carbon fibre systems but also bismaleimide, polyester and vinyl ester matrices; dielectric properties; thermal characterisation
Interests: microwave processing; structure and properties of materials; formulation of resins; the effect rapid heating has on the structure and properties of materials; epoxy resin/ carbon fibre systems but also bismaleimide, polyester and vinyl ester matrices; dielectric properties; thermal characterisation
LCC Coordination Chemistry Laboratory, Toulouse, France
Interests: molecule-based conductors, superconductors, and magnets; nanoparticles; nanowires; nanostructured surfaces; thin films
Special Issues, Collections and Topics in MDPI journals
Interests: molecule-based conductors, superconductors, and magnets; nanoparticles; nanowires; nanostructured surfaces; thin films
Special Issues, Collections and Topics in MDPI journals
Department of Engineering, University of Messina, 98166 Messina, Italy
Interests: performance-based seismic design; seismic isolation; earthquake engineering; innovative structural control systems; limit-state behavior of reinforced concrete structures; strengthening techniques of reinforced concrete structures
Special Issues, Collections and Topics in MDPI journals
Interests: performance-based seismic design; seismic isolation; earthquake engineering; innovative structural control systems; limit-state behavior of reinforced concrete structures; strengthening techniques of reinforced concrete structures
Special Issues, Collections and Topics in MDPI journals
ACLabs-Laboratories of Applied Chemistry, Department of Chemical, Materials and Industrial Production Engineering, University of Naples Federico II, P.le V. Tecchio 80, 80125 Naples, Italy
Interests: natural and synthetic zeolites; adsorption and ion exchange properties; wastewater treatments; zeolite surface modification; drug delivery; emerging contaminant treatment
Special Issues, Collections and Topics in MDPI journals
Interests: natural and synthetic zeolites; adsorption and ion exchange properties; wastewater treatments; zeolite surface modification; drug delivery; emerging contaminant treatment
Special Issues, Collections and Topics in MDPI journals
National Centre for Metallurgical Research (CENIM-CSIC), Avda. Gregorio del Amo, 8, 28040 Madrid, Spain
Interests: atmospheric corrosion; metallic materials; weathering and carbon steels; anticorrosive coatings
Interests: atmospheric corrosion; metallic materials; weathering and carbon steels; anticorrosive coatings
