You are accessing a machine-readable page. In order to be human-readable, please install an RSS reader.
All articles published by MDPI are made immediately available worldwide under an open access license. No special permission is required to reuse all or part of the article published by MDPI, including figures and tables. For articles published under an open access Creative Common CC BY license, any part of the article may be reused without permission provided that the original article is clearly cited. For more information, please refer to https://www.mdpi.com/openaccess.
Feature papers represent the most advanced research with significant potential for high impact in the field. A Feature Paper should be a substantial original Article that involves several techniques or approaches, provides an outlook for future research directions and describes possible research applications.
Feature papers are submitted upon individual invitation or recommendation by the scientific editors and must receive positive feedback from the reviewers.
Editor’s Choice articles are based on recommendations by the scientific editors of MDPI journals from around the world. Editors select a small number of articles recently published in the journal that they believe will be particularly interesting to readers, or important in the respective research area. The aim is to provide a snapshot of some of the most exciting work published in the various research areas of the journal.
Original Submission Date Received: .
The following are the Editor’s Choice Articles published in 2020 in Batteries (ISSN: 2313-0105):
1. “Mathematical Heat Transfer Modeling and Experimental Validation of Lithium-Ion Battery Considering: Tab and Surface Temperature, Separator, Electrolyte Resistance, Anode-Cathode Irreversible and Reversible Heat”
by Anosh Mevawalla et al.
Batteries 2020, 6(4), 61
Available online: https://www.mdpi.com/2313-0105/6/4/61
2. “Lightweight Polymer-Carbon Composite Current Collector for Lithium-Ion Batteries”
by Marco Fritsch et al.
Batteries 2020, 6(4), 60
Available online: https://www.mdpi.com/2313-0105/6/4/60
3. “Optimal Siting and Sizing of Battery Energy Storage Systems for Distribution Network of Distribution System Operators”
by Panyawoot Boonluk et al.
Batteries 2020, 6(4), 56
Available online: https://www.mdpi.com/2313-0105/6/4/56
4. “Comprehensive Hazard Analysis of Failing Automotive Lithium-Ion Batteries in Overtemperature Experiments”
by Christiane Essl et al.
Batteries 2020, 6(2), 30
Available online: https://www.mdpi.com/2313-0105/6/2/30
5. “SEI Growth Impacts of Lamination, Formation and Cycling in Lithium Ion Batteries”
by Martin Frankenberger et al.
Batteries 2020, 6(2), 21
Available online: https://www.mdpi.com/2313-0105/6/2/21
6. “Inhomogeneous Temperature Distribution Affecting the Cyclic Aging of Li-Ion Cells. Part II: Analysis and Correlation”
by Daniel Werner et al.
Batteries 2020, 6(1), 12
Available online: https://www.mdpi.com/2313-0105/6/1/12
7. “Accelerated Aging Characterization of Lithium-ion Cells: Using Sensitivity Analysis to Identify the Stress Factors Relevant to Cyclic Aging”
by Tanja Gewald et al.
Batteries 2020, 6(1), 6
Available online: https://www.mdpi.com/2313-0105/6/1/6
8. “The Impact of Environmental Factors on the Thermal Characteristic of a Lithium–ion Battery”
by Gerd Liebig et al.
Batteries 2020, 6(1), 3
Available online: https://www.mdpi.com/2313-0105/6/1/3
9. “A Review on Temperature-Dependent Electrochemical Properties, Aging, and Performance of Lithium-Ion Cells”
by Mohammad Alipour et al.
Batteries 2020, 6(3), 35
Available online: https://www.mdpi.com/2313-0105/6/3/35
10. “Degradation and Aging Routes of Ni-Rich Cathode Based Li-Ion Batteries”
by Philipp Teichert et al.
Batteries 2020, 6(1), 8
Available online: https://www.mdpi.com/2313-0105/6/1/8