Metrology, Volume 5, Issue 1

Waveform generation as part of on-chip built-in self-test (BIST) circuitry often necessitates sufficient linearity without expensive hardware overhead. Achieving high linearity is critical for accurate signal generation, especially in applications re...

There is growing concern regarding the environmental and operational safety aspects of fuel. The result of a physicochemical measurement is the outcome of a series of steps that begin with the sampling process. The information obtained from this step...

This paper proposes a metrologically interpretable soft sensing method for estimating the liquid flow rates in hydraulic systems from non-invasive vibration frequency power band data. Despite considerable interest in non-invasive flow estimation, sta...

This study focuses on a detailed analysis of the cutting forces in rotational turning, a novel machining process designed to achieve high surface quality and productivity. Unlike traditional longitudinal turning, rotational turning employs a helical...

The microfluidic industry faces a significant challenge due to the lack of sensitive and standardized methods. One critical need is the measurement of internal channel dimensions in fully assembled chips. This study presents and compares several prot...

Sensor networks, which are increasingly being used in a broad range of applications, constitute a measurement paradigm involving ensembles of sensors measuring possibly different quantities at a discrete sample of spatial locations and temporal point...

There is a growing field that is devoted to developing inexpensive microscopes and measurement devices by leveraging low-cost commercial parts that can be controlled using smartphones or embedded devices, such as Arduino and Raspbery Pi. Examples inc...

This article examines how water content is a crucial parameter for the preservation of wooden artworks and buildings, focusing on non-invasive ways of measuring water content through capacitive methods. A personalized, low-cost probe to measure the d...