Skip to Content
  • Article
  • Open Access

23 December 2016

Study on the Relationship of Knitted Female Underwear Pressure Comfort and Loose Quantity

,
and
1
Xi'an Polytechnic University, Xi'an 710048, Shaanxi, China
2
Xi'an Jiaotong University, Xi'an 710049, Shaanxi, China
*
Author to whom correspondence should be addressed.

Abstract

The underwear fit and pressure comfort is a crucial importance. This paper firstly used the Untouched 3D Body Scanner to scan the 110 young female body, and extracts a total of 17 human body sizes related to underwear structure, in all the directions including the horizontal directionvertical direction and other direction. Through analyzing the data, this paper focused on that among the horizontal dimensions: waist circumference, abdomen circumference, hip circumference, and the thigh root circumference; Vertical dimension: height, waist high; and other size: lower trunk length is the biggest difference, and the key part that affects the underwear specification. To analyze these measurement results and contrast with the national female underwear shape series standard found that the most common is the intermediate of A shape, at present, so regard the female intermediates as main object of study. Assess this knitting fabric is suitable for the middle of elastic underwear, through the test of fabric gram weight, warp/weft, thickness and elasticity. Moreover, this paper made the zero relaxation prototype with inelastic fabric by utilized vertical cutting and pattern, combined with young women wearing preferences, chose the female low-rise boxer briefs style as the main style of study. On this basis increase to −4 cm relaxation in turn in the Abdominal girth, hip girth and thigh girth, fork reduce 0.5 cm in turn. According to this regular to make five different relaxation knitted female underwear, and invites eight eligible subjects to put on the underwear to complete a series of dynamic testing, at the same time, gives the subjective evaluation timely for each related panties pressure comfort under the condition of different actions. Finally, With local comfortable stress evaluation method to evaluate the pressure when subjective human movement, the biggest impact of the site in turn, is abdominal, back hip, thigh, the bottom fork, based on analyzing the data, found that when abdomen circumference and hip circumference of the loose quantity is −17 cm, thigh circumference is −12 cm, and fork is 13 cm, people who wear this kind of knitted underwear can have the most comfortable feeling.

1. Preface

At present, China has 1.4 billion people, the female is about 670 million. According to the survey, most of the women would buy 4-10 panties every year, therefore, In terms of the underwear market, female underwear has immeasurable potential development. With the society development, the modern female underwear is not only the role of shade and sanitation, but also comfortable and health. But the market not concern this too much.
The loose quantity is one of the important factors of the clothing wearing comfort. Previous studies have shown, the loose quantity related to many factors, including the elementary physiological needs, style, aesthetics, motion etc. Among this, the fabric texture also have close relations, for example, Woven and knitted fabric has obvious differences on the human body normal demand for loose quantity. Woven fabric does not have very good elasticity, so need to add some loose quantity to meet the physiological needs, because of its unique structure, the knitted fabric has good flexibility, negative loose quantity can meet the demand.
The wearing comfort affects not only the wearer’s psychological feeling, but also the physical health. Clothing pressure comfort is an important index for evaluating the clothing comfort [1], the human is in motion, underwear contacts with the body directly, that will produce the certain amount of pressure on the body and influence the wearing comfort. The design of relaxation can affect the wearing comfort in dynamic state, and it plays an important role in the version design [2]. Because underwear put in fit, a bigger relaxation will give more comfort on a human body, but it might affect on aesthetic. However, the relaxation is not enough, it will produce large pressure, which affects the human body wearing comfort. So it is important to analyze appropriate relaxation of underwear to the pressure comfort of human body.

2. Research on the Lower Body Size of Young Women

2.1. The Method of Body Measuring

Present, the garment industry adopts two method of body measuring: One is contact measurement, owns to traditional manual measurements that contact to the human body directly. Using flexible rule, caliper, range finder, Angle instrument, Martin section instrument etc. The advantage is Simple and convenient, but the defect is slow and imprecise; the other is Non-contact measurement, through non-contact infrared scanning to measure. The advantage is accurate and rapid, it is conceivable that is more expensive and complex.

2.2. Measurement the Lower Body Size of Young Women

2.2.1. The Equipment of Measuring

Non-contact 3D body scanner is the high-tech human body measurement technology, which is based on the modern optical technology and combined with the information processing technology, electronics, computer vision and computer image applications. At the same time, it can also use computer automatic measurement ability to measure out the basic data of anthropometric measurement conveniently, quickly and automatically through the computer redefining the image information [3]. This experiment uses Non-contact 3D body scanner, in clothing engineering center of Xi’an Polytechnic University, the scanning machine model is JB-3 DLS-BODY. (as Figure 1)
Figure 1. 3D Body scanner.

2.2.2. The Object of Measuring

Human Dimensions of Chinese Adults GB10000-1988 divided Chinese people into three group according thestage of age: (1) 18 to 25 years old (women and men) (2) 26 to 35 years old (women and men) (3) 36 to 55 years old (women) and 36-60 years old (men). In this paper, according to the national standard, choose the measurement object of 18 to 25 years old young women, the effective sample number is 111.

2.2.3. The Part of Measuring

According to the law of the People’s Republic of China national standard GB/T 16160-2008, totally there are 52 body measurement projects [4], this paper chooses 17 related body parts for measurement. The woman’s underwear reference data includes the height, waist height, waist circumference, hip circumference size in the China shape standard [5] (as Figure 2).
Figure 2. Figure at site.
(Figure 2 Remark 1. waist girth 2. abdominal girth 3. hip girth 4. thigh girth 5. height 6. waist height 7. hip height 8. body rise 9. waist to hips 10. total crotch 11. front crotch 12. back crotch 13. waist depth 14. hip depth 15. hip depth 16. hip breadth 17. waist breadth).

2.2.4. Measurement Result Analysis

Based on the group measurement to get original data by using statistical methods, basic statistical analysisincluding the maximum, minimum, average, standard deviation, variance etc (as Table 1).
Table 1. Body part statistical analysis table.
Table 1 reflects the basic data of the measured object parts, including the maximum, minimum, average, standard deviation and variance. The average represents the average of each part, variance and standard deviation reflect a basic deviation degree of the measured object data. The larger of the value, the greater degree of the deviation.

2.3. Lower Body Size of Young Women Analysis

2.3.1. The Key Parts of the Extraction

According to the law of the People’s Republic of China national standard GB/T16160-2008, the human body size isdivided into three categories: a. horizontal dimension size (including surrounded degree); b. the vertical dimension; c. other sizes.
Table 1 reflect the 17 basic data of human body associated with underwear, choosing more different parts as key parts size by analyzing variance and standard deviations.
Horizontal dimension: waist circumference, abdominal girth, hip circumference, and thigh circumference;
Vertical dimensions: height, waist height
Other sizes: the long trunk
Through extracting relevant date to further analysis (as Table 2 to Table 8)
Table 2. Height distribution table.
Table 3. High waist distribution table.
Table 4. Waist distribution table.
Table 5. Abdominal girth distribution table.
Table 6. Hip circumference distribution table.
Table 7. Thigh girth distribution table.
Table 8. Total crotch distribution table.
Through the statistical analysis of these areas, divide this parts into some range that can cover all the size of the tested object, according to the different file, then extract the most concentrated area, use the intermediate value as the most representative data, compared the median date with average (as Table 9).
Table 9. Female underwear main dimensions analysis table.

2.3.2. National Underwear Shape Standard

National shape standard can be used for female underwear in the reference data are: height, high waist circumference, waist circumference, hip circumference size [6] (as Table 10).
Table 10. National underwear shape standard table.

3. The Fabric’s Performance Test

3.1. Measurement Project Select

The fabric’s weight, warp and weft density, and thickness have the close relationship with size of the knitting clothing, and have an impact on wearing comfort. As the knitted fabric has elasticity, and the underwear is close-fitting, it will extend with the human skin. Influenced by the clothing specification size and the characteristics of design, the fitting clothing should provide enough space for skin. The stretch ability of the fabric is an important factor to ensure the pressure comfort, which depends on the fabric elasticity and elastic recovery performance. Fabric elasticity mainly includes elongation rate, tensile elastic elongation response rate, index of plastic deformation and tensile stress relaxation [7]. The measurement of elastic performance of knitted fabric can provide convenient and scientific basis for the size design of underwear.

3.2. Measurement Result Analysis

The experiment had done in the standard environment that the temperature is (20+2)°C, relative humidity is (65+2)%. In order to guarantee the accuracy of experimental results, each layout project were measured five times, finally the average as the final test results (as Table 11).
Table 11. Fabric performance schedule.
(Remark: The instrument of fabric weight is MP120-1 ELECTRONIC BALANCE, the test standard is BS EN12127.
The instrument of fabric thickness is YG141D Digital fabric thickness tester, the test standard is GB/T3820-1997.
The instrument of fabric tensile elastic recovery experiments is YC026PC-500 Electronic strength tester, the standard is FZ/T70006.)
The elasticity change of fabric can be divided into high elastic fabrics, shot in fabric, and low stretch fabric according to the elasticity of clothing material. High elastic fabric has good elongation and rapid rebound resilience, its elasticity always is 30%-40%, and it can be used to make sportswear and elastic pants; shot in fabric is between 20% to 30%, and it is suitable for suit and underwear; low stretch fabrics is under 20%, it is suitable for trouser and coat. According to the tensile force experiment above, it is known that the fabric belongs to shot in the fabric. Taking other performance into account, it can be found that this kind of knitting fabric is suitable for underwear.

4. Research on Knitting Female Underwear Loose Quantity

4.1. The Realization of the Prototype of Female Underwear

4.1.1. The Basic Shape of Female Underwear

Female underwear involved in normal human body is overall shape, waist is narrow and tight but the hip is raised. From the positive side of the body, Waist, hip, leg external curve as the one line for medial axis is Symmetry and into the “S” shape, the curve is soft and smooth. In the human body side, the abdominal line that approach the waist is smooth, after hip convex are obvious raised and becoming hip peak, the plumpest place is also the basis of hip circumference measurements [8] (as Figure 3).
Figure 3. Low body figure.

4.1.2. Female Underwear Styles

According to the feature female underwear can divided into thongs, briefs, pants. According to the waist form shape can divided into high waist, middle waist and low waist.
The first principle of underwear selection is comfortable, and it also has the characteristic of moisture, durable and washable, good elasticity of fabric, fit front crotch [6]. Through investigation and analysis for underwear market, it is found that the waist boxer in female occupy the dominant position in the young women, which is deeply loved by women because of the wearing comfort. This experiment chooses the waist boxer style that caters to the public’s need, but in order to achieve better body shaping effect, in the leg design, it is not completely level, there are upward inclined angle. (Specific design as Figure 4)
Figure 4. Low waist boxer female underwear.

4.2. The Prototype Obtain

The main object of the study is the intermediates 160 cm young female, and this experiment using standard 160/84 A mannequin as the draping prototype. In order to avoid the effects of elastic fabric in the version of production, this study first uses inelastic fabric as the draping sample cloth, without considering any loose quantity in draping process (Draping process as Figure 5).
Figure 5. Draping process.
Considering the wearing comfort and aesthetic requirements in bottom crotch during the process of draping, it is suggested that the crotch width is 9 cm, and Length is 15 cm under the condition of no loose. Taking down the cutting sample, using the principle of dart merge, merging the front and back dart, then joining the crotch piece together (as Figure 6).
Figure 6. Underwear prototype.
Prototype underwear does not add any relaxation, so it can be assumed as the zero ease underwear. Because the knitting fabric has certain elasticity, abdomen, hips reduction can be ignored, when the dart is transferred. Table 12 prototype size can be deemed as the zero ease underwear, then increasing the negative relaxation one by one based on this, on the surround degree direction, abdominal girth, hip girth and thigh girth reduce 4 cm, on the length direction, the bottom crotch reduce 0.5 cm, in turn. Producing a total of five underwear, be named after 1#, 2#, 3#, 4#, 5# according to the order the relaxation increases gradually (as Table 13).
Table 12. Prototype specification unit:cm.
Table 13. Underwear negative loose quantity table unit:cm.

5. Subjective Pressure Experiment Design

5.1. The Choice of the Tester

According to the national standard and the prototype size requirements, in order to guarantee the accuracy of the test, this experiment chooses eight college female students as the experimental subjects (Specific information as Table 14).
Table 14. Tester information table.

5.2. Experimental Environment and Requirements

Experimental environment:The test environment is no wind, temperature is 25+2 °C, humidity 65+2%.
Experimental requirements:
(1)
The tester can’t eat anything before two hours of the test
(2)
The testers need to clear understand the experiment process, and must be keep 5s for every experimental mention
(3)
Every tester must complete the questionnaire carefully after the experiment

5.3. The Choice of Experimental Action

Select the five actions: normal standing, walking, 90° bend the leg, lift leg, sitting, these include the daily action of human body basically (as Figure 7).
Figure 7. The choice of experimental action.
Normal standing Walking 90° bend the leg Lift leg Sitting.

5.4. The Selection of Part

This experiment selects the abdomen, hips, thighs, front crotch, back crotch and bottom crotch six key parts.

5.5. Data Collection and Analysis

In psychophysical, quantity estimation is a simple and wide method of psychological scale. Likert scale is used to show the respondents’ attitude, view, evaluation and intention for something. Likert scale includes 5 scales, 7 level scales and 10 level scales form different levels [9].
This experiment designs 7 level, from 0 to 6 represents the pressure increase gradually (as Figure 8).
Figure 8. Evaluation pattern Of pressure comfort.
The results shown in the following table (as Table 15)
Table 15. Local pressure comfortable.
Table 15 shows as the skin of slip, different loose quantity can lead to different pressure. The biggest impact of the site in turn, is abdominal, back hip, thigh, the bottom fork, however for the front crotch and the bottom long that is relatively small, so Would not be the main factor. When the loose quantity is large, it stay away from body, the pressure is relatively small, but can easily cause the surface wrinkle and influence wearing Comfort and beauty. On the contrary, when the quantity is reduced underwear close to human body and have strong pressure, it can cause people wearing tight, uncomfortable. Therefore, only to maintain a relatively reasonable pressure, can satisfy people wearing comfort and beauty (The partial pressure distribution table as the Table 16).
Table 16. Different loose quantity underwear partial pressure comfort distribution table.

6. Conclusions

According to the Table 6, it can be easily to find the general scope that the different relaxation underwear causes pressure comfort for people. 1 # and 2 # don’t fit relatively for wearing, because they are too loose, therefore it is not very obvious for human body to feel pressure. But the 5# is too small. Therefore, it makes the person feel more pressure, and uncomfortable. Since 3# and 4# underwear both are within the reasonable scope of relatively, the mean value can be used as the optimal relaxation value, that is when, abdomen pluses equals −17 cm, the quantity of hip circumference equals −17 cm, crotch size equals 13 cm, and the quantity of reasonable thigh root circumference size equals −12 cm. In addition, this test mainly adopts subjective evaluation method, but the subjective evaluation method may also have some certain defects, so it is hoped to combine objective pressure test in the later study to improve the experiment plan.

References

  1. XX Song, XW Feng. The relationship between Clothing pressure and human body comfort [J]. Journal of Textile Res: 3, 2006, 103-105.
  2. RF Jiang. The research and analysis of young men’s underwear fit [D]. Xian: Xi’an Polytechnic University; 2013.
  3. Miehelle H, Demers, Jerfery D, Hurley, Riehard C. WuIPern, Three Dimension Surface Capture for Body Measurement Projected Sinusoidal Patterns [Z]. SPIE: 1997, 3023.
  4. People’s Republic national standard of China GB/T [S]. The measurement part of the human body and method for clothing 16160-2008, 2008.
  5. JR Yin. Underwear design tutorial [M]. China’s textile publishing: 2005, 23-24.
  6. JL Chang, JR Yin. Underwear pattern design principle and instance [M]. Shanghai: Shanghai Textile sci and tech: 1995, 47-49.
  7. People’s Republic national standard of China FZ/T70006-2004[S]. The test method for Knitted fabric tensile elastic recovery rate. 2004.
  8. ZY Zhong. The human body and clothing [M]. Yuan GL translation. Beijing: China’s textile publishing. 2003, 93-96, 23-26.
  9. LB Jin. Likert scale statistical analysis and fuzzy comprehensive evaluation [J]. Journal of ShanDong sci: 2, 2006, 18-24.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.