Skip to Content
  • Article
  • Open Access

31 December 2021

Modeling and Simulation of Radiation-proof Clothing for Pregnant Women based on Finite Element Method †

,
,
and
Apparel & Art Design College, Xi'an Polytechnic University, Xi'an 710048, China
*
Author to whom correspondence should be addressed.
†
Project supported by Shaanxi Engineering Research Center Of Apparel Intelligent Design And Manufacture platform.

Abstract

Relevant research shows that pregnant women have a high sensitivity to electromagnetic radiation. At present, there is a lack of digital evaluation system for the simulation model of the degree of electromagnetic radiation exposure of pregnant women and the effectiveness of electromagnetic radiation shielding clothing for pregnant women. In this paper, the simulation model of pregnant woman and fetus is proposed, and the virtual fitting software is used to model the clothing, and finally the three-dimensional electromagnetic simulation software is used to combine the model and simulate the real situation. In this paper, the effects of electromagnetic radiation on pregnant women and fetuses before and after wearing electromagnetic radiation protective clothing were studied by means of digital evaluation. The results showed that the influence of electromagnetic radiation on pregnant women concentrated in the neck, chest, abdomen, leg;To a certain extent, electromagnetic radiation protective clothing can reduce the impact of radiation on pregnant women and fetuses. In this paper, a digital evaluation method is proposed, which provides a new idea for testing the effectiveness of electromagnetic shielding for pregnant women.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.