Today, the common problem of all countries in the world is the presence of heavy metals in water, air and soil environments. Ni(II) is a pollutant belonging to the group of primary toxic and bioaccumulative heavy metals commonly found in industrial wastewater. In addition, recycling food waste such as mushroom stalk wastes (MSWs), which are released as a result of domestic use, instead of throwing them into the garbage cycle, is of great importance for the minimization of environmental pollutants. Therefore, the main aim of the study is to determine Ni(II) biosorption capacity by applying natural MSW to wastewater. Within the scope of the study, the purification efficiency of Ni (II) was evaluated with laboratory-scale batch biosorption experiments under a different MSW dose, contact time and pH conditions. To reveal the biosorbent qualities of the MSW used in the study, its surface morphology and functional structure were determined using FT-IR and SEM. According to the experimental data, the suitability of Langmuir and Freundlich isotherms, and pseudo-second-order and pseudo-first-order kinetics, was calculated. According to the optimum adsorption factors, the maximum removal efficiency and adsorption capacity of Ni (II) for MSW were determined. Experimental results show that MSW is an economical and easily accessible biosorbent material.
Supplementary Materials
The presentation materials can be downloaded at: https://www.mdpi.com/article/10.3390/proceedings2024105148/s1.
Author Contributions
Conceptualization, methodology, formal analysis, investigation, resources, writing—original draft preparation, writing—review and editing, visualization, H.Ç., T.B., İ.Ş. and Ş.T. All authors have read and agreed to the published version of the manuscript.
Funding
This research received no external funding.
Institutional Review Board Statement
Not applicable.
Informed Consent Statement
Not applicable.
Data Availability Statement
No new data were created.
Conflicts of Interest
The authors declare no conflicts of interest.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).