The authors wish to make the following corrections to this paper [1]:
Error in Figures
In the original article, there was a mistake in * Figure 1 and Figure 6.** as published. **State the mistake which was made**. The corrected ** Figure 1 and Figure 6. ** appear below. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected.
Figure 1.
Area diagram of corroded steel wire.
Figure 6.
Corrosion fatigue fracture morphology. (a) Corrosion pit evolution diagram; (b) steel wire fracture diagram near corrosion pit.
Reference
- Xue, S.; Shen, R. Corrosion-Fatigue Analysis of High-Strength Steel Wire by Experiment and the Numerical Simulation. Metals 2020, 10, 734. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).