In the original publication [1], there was a mistake in Table 1 as published. The Turnaround Time (TAT) values were incorrectly written as “PowerChek—1 h 30 min, Allplex—2 h 10 min”. The TAT values should represent the total time required, calculated as the sum of the Hands-on Time and PCR Run Time. Accordingly, the correct values are “PowerChek—2 h 20 min, Allplex—3 h 10 min”. The corrected version of Table 1 appears below. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Table 1.
Specifications of three kinds of real-time PCR for respiratory virus detection.
Reference
- Lee, H.; Akter, R.; Lee, J.-H.; Ryu, S.W. Evaluation of the PowerChek™ Respiratory Virus Panel 1/2/3/4 for the Detection of 16 Respiratory Viruses: A Comparative Study with the Allplex™ Respiratory Panel Assay 1/2/3 and BioFire® Respiratory Panel 2.1 plus. Diagnostics 2025, 15, 2713. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2025 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).