Next Article in Journal
A New Single-Leg Lower-Limb Rehabilitation Robot: Design, Analysis and Experimental Evaluation
Next Article in Special Issue
PSO-Based Feedrate Optimization Algorithm for Five-Axis Machining with Constraint of Contour Error
Previous Article in Journal
A Study on Optimal Design Process of Dual Rotor Axial-Flux Permanent Magnet Synchronous Motors
Previous Article in Special Issue
Lubrication Mechanism of scCO2-MQL in the Assisted Machining of Titanium Alloys
 
 
Article

Article Versions Notes

Machines 2023, 11(4), 446; https://doi.org/10.3390/machines11040446
Action Date Notes Link
article xml file uploaded 1 April 2023 08:23 CEST Original file -
article xml uploaded. 1 April 2023 08:23 CEST Update https://www.mdpi.com/2075-1702/11/4/446/xml
article pdf uploaded. 1 April 2023 08:23 CEST Version of Record https://www.mdpi.com/2075-1702/11/4/446/pdf
article html file updated 1 April 2023 08:24 CEST Original file -
article html file updated 19 April 2023 20:03 CEST Update https://www.mdpi.com/2075-1702/11/4/446/html
Back to TopTop