Skip to Content
PolymersPolymers
  • Feature Paper
  • Article
  • Open Access

27 November 2022

11 Pages

Monomers Release from Direct and Indirect Resin-Based Restorations after Immersion in Common Beverages

,
,
,
,
and
1
Department of Dental Tissues Pathology and Therapeutics, Division of Operative Dentistry, Faculty of Dentistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
2
Department of Chemistry, Laboratory of Analytical Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece
*
Author to whom correspondence should be addressed.
This article belongs to the Section Polymer Composites and Nanocomposites

Abstract

Impurities or degradation of the components of resin-based materials have been throughout investigated by the dental scientific community. The aim of this study is to examine if there is a release of monomers from resin-based materials when they are immersed in common beverage materials which are consumed by the population in large quantities. Three representative dental materials were used for this study, one resin composite indicated for direct restorations and two Computer Aided Design and Computer Aided Manufacturing (CAD/CAM) materials with different methods of fabrication. Forty specimens were fabricated from each material using a low-speed precision sectioning blade 12 × 14 × 2 mm in size and immersed in wine, coffee or cola for 48 h and 12 days, equivalent to 1 month and 1 year of consumption. The materials released more monomers when the materials were immersed in the wine solution (p < 0.05). CAD/CAM materials release less monomers compared to the resin composite material indicated for direct restorations (p < 0.05). The CAD/CAM materials leach a limited quantity of monomers when they are immersed in common beverages due to the manufacturing process which includes high-temperature/high-pressure polymerization.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.