Müller, M.; Jirků, P.; Šleger, V.; Mishra, R.K.; Hromasová, M.; Novotný, J.
Effect of Infill Density in FDM 3D Printing on Low-Cycle Stress of Bamboo-Filled PLA-Based Material. Polymers 2022, 14, 4930.
https://doi.org/10.3390/polym14224930
AMA Style
Müller M, Jirků P, Šleger V, Mishra RK, Hromasová M, Novotný J.
Effect of Infill Density in FDM 3D Printing on Low-Cycle Stress of Bamboo-Filled PLA-Based Material. Polymers. 2022; 14(22):4930.
https://doi.org/10.3390/polym14224930
Chicago/Turabian Style
Müller, Miroslav, Petr Jirků, Vladimír Šleger, Rajesh Kumar Mishra, Monika Hromasová, and Jan Novotný.
2022. "Effect of Infill Density in FDM 3D Printing on Low-Cycle Stress of Bamboo-Filled PLA-Based Material" Polymers 14, no. 22: 4930.
https://doi.org/10.3390/polym14224930
APA Style
Müller, M., Jirků, P., Šleger, V., Mishra, R. K., Hromasová, M., & Novotný, J.
(2022). Effect of Infill Density in FDM 3D Printing on Low-Cycle Stress of Bamboo-Filled PLA-Based Material. Polymers, 14(22), 4930.
https://doi.org/10.3390/polym14224930