Polymers, Volume 11, Issue 3

This study analyzed the structural changes of semicrystalline polylactide (PLA) in the form of spun-bonded mulching nonwovens, during outdoor composting. The investigation was carried out at the microstructural, supramolecular and molecular levels us...

Food corruption and spoilage caused by food-borne pathogens and microorganisms is a serious problem. As a result, the demand for antibacterial drugs in food packaging is growing. In this review, biodegradable and non-biodegradable materials for food...

There is an increasing demand for lithography methods to enable the fabrication of diagnostic devices for the biomedical and agri-food sectors. In this regard, scanning probe lithography methods have emerged as a possible approach for this purpose, a...

This paper presents a method for the preparation of nanocomposite cellulose fibers doped with silver nanoparticles (AgNPs), as well as the effect of silver nanoparticles on the structure and properties of fibers. The fibers were obtained by an enviro...

Thermal bonding technology is the most commonly used approach in bonding injection-molded microfluidic chips. Although the bonding mechanism is still under debate, the molecular dynamics (MD) method can provide insight into the bonding process on a m...

A series of novel self-cleaning hybrid photocatalytic ultrafiltration (UF) membranes were fabricated to separate polyacrylamide, which is widely used as a commercial flocculant. To maximize the self-cleaning and anti-fouling properties of hybrid memb...

Polymers from renewable resources and especially strong engineering partially aromatic biobased polyesters are of special importance for the evolution of bioeconomy. The fabrication of polymer blends is a creative method for the production of tailor-...

Single and double layers of polymer coated surfaces are investigated by means of Dissipative Particle Dynamics (DPD), focusing on the difference between grafted ring and linear chains. Several different surface coverages σ , as well as chain len...

This paper presents an experimental study about the influence of interfacial properties on the performance of fiber-reinforced asphalt. In this study, four types of fiber including one fiber-reinforced plastic (FRP), two lignin fibers, and one basalt...

Chiral polyamidoamino acids were obtained by polyaddition of N,N’-methylenebisacrylamide with d-, d,l- and l-tryptophan (M-d-Trp, M-d,l-Trp and M-l-Trp). l-tryptophan/glycine copolymers, M-G-l-Trp5, M-G-l-Trp10, M-G-l-Trp20 and M-G-l-Trp40, wer...