Order Article Reprints

Zhao J, Liu Z, Gong Z, Liu A, Cai Y, Wang B, Song Q, Liang X, Zhang Y, Zhang Z, et al. Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions. Micromachines. 2023; 14(6):1263. https://doi.org/10.3390/mi14061263

Zhao, Jinfu, Zhanqiang Liu, Zipeng Gong, Annan Liu, Yukui Cai, Bing Wang, Qinghua Song, Xiaoliang Liang, Yanbin Zhang, Zhicheng Zhang, and et al. 2023. "Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions" Micromachines 14, no. 6: 1263. https://doi.org/10.3390/mi14061263

Zhao, J., Liu, Z., Gong, Z., Liu, A., Cai, Y., Wang, B., Song, Q., Liang, X., Zhang, Y., Zhang, Z., & Ji, H. (2023). Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions. Micromachines, 14(6), 1263. https://doi.org/10.3390/mi14061263