Next Article in Journal
Porosity Analysis of Additive Manufactured Parts Using CAQ Technology
Next Article in Special Issue
Cutting Forces and Tool Wear Investigation during Turning of Sintered Nickel-Cobalt Alloy with CBN Tools
Previous Article in Journal
Surface Analysis of TMCTS-Based SiOC(H) Low-k Dielectrics in Post-Etch Strip of ACL Hardmask
 
 

Order Article Reprints

Journal: Materials, 2021
Volume: 14
Number: 1143

Article: Yttrium’s Effect on the Hot Cracking and Creep Properties of a Ni-Based Superalloy Built Up by Additive Manufacturing
Authors: by Santhosh Banoth, Thaviti Naidu Palleda, Sota Shimazu and Koji Kakehi
Link: https://www.mdpi.com/1996-1944/14/5/1143

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop